Take the newly introduced EFI_RT_PROPERTIES_TABLE configuration table
into account, which carries a mask of which EFI runtime services are
still functional after ExitBootServices() has been called by the OS.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Revision 2.8 of the UEFI spec introduces provisions for firmware to
advertise lack of support for certain runtime services at OS runtime.
Let's store this mask in struct efi for easy access.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The efi_get_fdt_params() routine uses the early OF device tree
traversal helpers, that iterate over each node in the DT and invoke
a caller provided callback that can inspect the node's contents and
look for the required data. This requires a special param struct to
be passed around, with pointers into param enumeration structs that
contain (and duplicate) property names and offsets into yet another
struct that carries the collected data.

Since we know the data we look for is either under /hypervisor/uefi
or under /chosen, it is much simpler to use the libfdt routines, and
just try to grab a reference to either node directly, and read each
property in sequence.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Push the FDT params specific types and definition into fdtparams.c,
and instead, pass a reference to the memory map data structure and
populate it directly, and return the system table address as the
return value.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

On ARM systems, we discover the UEFI system table address and memory
map address from the /chosen node in the device tree, or in the Xen
case, from a similar node under /hypervisor.

Before making some functional changes to that code, move it into its
own file that only gets built if CONFIG_EFI_PARAMS_FROM_FDT=y.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Currently, mixed mode is closely tied to the EFI handover protocol
and relies on intimate knowledge of the bootparams structure, setup
header etc, all of which are rather byzantine and entirely specific
to x86.

Even though no other EFI supported architectures are currently known
that could support something like mixed mode, it still makes sense to
abstract a bit from this, and make it part of a generic Linux on EFI
boot protocol.

To that end, add a .compat section to the mixed mode binary, and populate
it with the PE machine type and entry point address, allowing firmware
implementations to match it to their native machine type, and invoke
non-native binaries using a secondary entry point.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Add support for booting 64-bit x86 kernels from 32-bit firmware running
on 64-bit capable CPUs without requiring the bootloader to implement
the EFI handover protocol or allocate the setup block, etc etc, all of
which can be done by the stub itself, using code that already exists.

Instead, create an ordinary EFI application entrypoint but implemented
in 32-bit code [so that it can be invoked by 32-bit firmware], and stash
the address of this 32-bit entrypoint in the .compat section where the
bootloader can find it.

Note that we use the setup block embedded in the binary to go through
startup_32(), but it gets reallocated and copied in efi_pe_entry(),
using the same code that runs when the x86 kernel is booted in EFI
mode from native firmware. This requires the loaded image protocol to
be installed on the kernel image's EFI handle, and point to the kernel
image itself and not to its loader. This, in turn, requires the
bootloader to use the LoadImage() boot service to load the 64-bit
image from 32-bit firmware, which is in fact supported by firmware
based on EDK2. (Only StartImage() will fail, and instead, the newly
added entrypoint needs to be invoked)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Currently, we either return with an error [from efi_pe_entry()] or
enter a deadloop [in efi_main()] if any fatal errors occur during
execution of the EFI stub. Let's switch to calling the Exit() EFI boot
service instead in both cases, so that we
a) can get rid of the deadloop, and simply return to the boot manager
   if any errors occur during execution of the stub, including during
   the call to ExitBootServices(),
b) can also return cleanly from efi_pe_entry() or efi_main() in mixed
   mode, once we introduce support for LoadImage/StartImage based mixed
   mode in the next patch.

Note that on systems running downstream GRUBs [which do not use LoadImage
or StartImage to boot the kernel, and instead, pass their own image
handle as the loaded image handle], calling Exit() will exit from GRUB
rather than from the kernel, but this is a tolerable side effect.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Add the definitions and use the special wrapper so that the loaded_image
UEFI protocol can be safely used from mixed mode.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

In commit

  c7fb93ec ("x86/efi: Include a .bss section within the PE/COFF headers")

we added a separate .bss section to the PE/COFF header of the compressed
kernel describing the static memory footprint of the decompressor, to
ensure that it has enough headroom to decompress itself.

We can achieve the exact same result by increasing the virtual size of
the .text section, without changing the raw size, which, as per the
PE/COFF specification, requires the loader to zero initialize the delta.

Doing so frees up a slot in the section table, which we will use later
to describe the mixed mode entrypoint.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

In the bootparams struct, init_size defines the static footprint of the
bzImage, counted from the start of the kernel image, i.e., startup_32().

The PE/COFF metadata declares the same size for the entire image, but this
time, the image includes the setup block as well, and so the space reserved
by UEFI is a bit too small. This usually doesn't matter, since we normally
relocate the kernel into a memory allocation of the correct size.
But in the unlikely case that the image happens to be loaded at exactly
the preferred offset, we skip this relocation, and execute the image in
place, stepping on memory beyond the provided allocation, which may be
in use for other purposes.

Let's fix this by adding the size of the setup block to the image size as
declared in the PE/COFF header.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The systab member in struct efi has outlived its usefulness, now that
we have better ways to access the only piece of information we are
interested in after init, which is the EFI runtime services table
address. So instead of instantiating a doctored copy at early boot
with lots of mangled values, and switching the pointer when switching
into virtual mode, let's grab the values we need directly, and get
rid of the systab pointer entirely.

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Instead of populating efi.systab very early during efi_init() with
a mapping that is released again before the function exits, use a
local variable here. Now that we use efi.runtime to access the runtime
services table, this removes the only reference efi.systab, so there is
no need to populate it anymore, or discover its virtually remapped
address. So drop the references entirely.

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Instead of going through the EFI system table each time, just copy the
runtime services table pointer into struct efi directly. This is the
last use of the system table pointer in struct efi, allowing us to
drop it in a future patch, along with a fair amount of quirky handling
of the translated address.

Note that usually, the runtime services pointer changes value during
the call to SetVirtualAddressMap(), so grab the updated value as soon
as that call returns. (Mixed mode uses a 1:1 mapping, and kexec boot
enters with the updated address in the system table, so in those cases,
we don't need to do anything here)

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

efi.runtime_version is always set to the same value on both
existing code paths, so just set it earlier from a shared one.

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

There is some code that exposes physical addresses of certain parts of
the EFI firmware implementation via sysfs nodes. These nodes are only
used on x86, and are of dubious value to begin with, so let's move
their handling into the x86 arch code.

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Since commit 33b85447 ("efi/x86: Drop two near identical versions
of efi_runtime_init()"), we no longer map the EFI runtime services table
before calling SetVirtualAddressMap(), which means we don't need the 1:1
mapped physical address of this table, and so there is no point in passing
the address via EFI setup data on kexec boot.

Note that the kexec tools will still look for this address in sysfs, so
we still need to provide it.

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

config_parse_tables() is a jumble of pointer arithmetic, due to the
fact that on x86, we may be dealing with firmware whose native word
size differs from the kernel's.

This is not a concern on other architectures, and doesn't quite
justify the state of the code, so let's clean it up by adding a
non-x86 code path, constifying statically allocated tables and
replacing preprocessor conditionals with IS_ENABLED() checks.

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The efi_config_init() routine is no longer shared with ia64 so let's
move it into the x86 arch code before making further x86 specific
changes to it.

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

IA64 calls efi_config_parse_tables() via efi_config_init(), which
does an explicit memremap() of the tables, which is unnecessary
on IA64. So let's call efi_config_parse_tables() directly, passing
the __va() of the config table array.

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The IA64 code never refers to the EFI system table except from
inside the scope of efi_init(). So let's use a local variable
instead of efi.systab, which will be going away soon.

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Instead of iterating over the EFI config table array manually,
declare it as an arch table so it gets picked up by the existing
config table handling code.

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

We have three different versions of the code that checks the EFI system
table revision and copies the firmware vendor string, and they are
mostly equivalent, with the exception of the use of early_memremap_ro
vs. __va() and the lowest major revision to warn about. Let's move this
into common code and factor out the commonalities.

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

There is no need for struct efi to carry the address of the memreserve
table and share it with the world. So move it out and make it
__initdata as well.

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The memory attributes table is only used at init time by the core EFI
code, so there is no need to carry its address in struct efi that is
shared with the world. So move it out, and make it __ro_after_init as
well, considering that the value is set during early boot.

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Move the rng_seed table address from struct efi into a static global
variable in efi.c, which is the only place we ever refer to it anyway.
This reduces the footprint of struct efi, which is a r/w data structure
that is shared with the world.

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The UGA table is x86 specific (its handling was introduced when the
EFI support code was modified to accommodate IA32), so there is no
need to handle it in generic code.

The EFI properties table is not strictly x86 specific, but it was
deprecated almost immediately after having been introduced, due to
implementation difficulties. Only x86 takes it into account today,
and this is not going to change, so make this table x86 only as well.

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The HCDP and MPS tables are Itanium specific EFI config tables, so
move their handling to ia64 arch code.

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Some plumbing exists to handle a UEFI configuration table of type
BOOT_INFO but since we never match it to a GUID anywhere, we never
actually register such a table, or access it, for that matter. So
simply drop all mentions of it.

Tested-by: Tony Luck <tony.luck@intel.com> # arch/ia64
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

One of the advantages of using what basically amounts to a callback
interface into the bootloader for loading the initrd is that it provides
a natural place for the bootloader or firmware to measure the initrd
contents while they are being passed to the kernel.

Unfortunately, this is not a guarantee that the initrd will in fact be
loaded and its /init invoked by the kernel, since the command line may
contain the 'noinitrd' option, in which case the initrd is ignored, but
this will not be reflected in the PCR that covers the initrd measurement.

This could be addressed by measuring the command line as well, and
including that PCR in the attestation policy, but this locks down the
command line completely, which may be too restrictive.

So let's take the noinitrd argument into account in the stub, too. This
forces any PCR that covers the initrd to assume a different value when
noinitrd is passed, allowing an attestation policy to disregard the
command line if there is no need to take its measurement into account
for other reasons.

As Peter points out, this would still require the agent that takes the
measurements to measure a separator event into the PCR in question at
ExitBootServices() time, to prevent replay attacks using the known
measurement from the TPM log.

Cc: Peter Jones <pjones@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

There are currently two ways to specify the initrd to be passed to the
Linux kernel when booting via the EFI stub:
- it can be passed as a initrd= command line option when doing a pure PE
  boot (as opposed to the EFI handover protocol that exists for x86)
- otherwise, the bootloader or firmware can load the initrd into memory,
  and pass the address and size via the bootparams struct (x86) or
  device tree (ARM)

In the first case, we are limited to loading from the same file system
that the kernel was loaded from, and it is also problematic in a trusted
boot context, given that we cannot easily protect the command line from
tampering without either adding complicated white/blacklisting of boot
arguments or locking down the command line altogether.

In the second case, we force the bootloader to duplicate knowledge about
the boot protocol which is already encoded in the stub, and which may be
subject to change over time, e.g., bootparams struct definitions, memory
allocation/alignment requirements for the placement of the initrd etc etc.
In the ARM case, it also requires the bootloader to modify the hardware
description provided by the firmware, as it is passed in the same file.
On systems where the initrd is measured after loading, it creates a time
window where the initrd contents might be manipulated in memory before
handing over to the kernel.

Address these concerns by adding support for loading the initrd into
memory by invoking the EFI LoadFile2 protocol installed on a vendor
GUIDed device path that specifically designates a Linux initrd.
This addresses the above concerns, by putting the EFI stub in charge of
placement in memory and of passing the base and size to the kernel proper
(via whatever means it desires) while still leaving it up to the firmware
or bootloader to obtain the file contents, potentially from other file
systems than the one the kernel itself was loaded from. On platforms that
implement measured boot, it permits the firmware to take the measurement
right before the kernel actually consumes the contents.
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

In preparation of adding support for loading the initrd via a special
device path, add the struct definition of a vendor GUIDed device path
node to efi.h.

Since we will be producing these data structures rather than just
consumsing the ones instantiated by the firmware, refactor the various
device path node definitions so we can take the size of each node using
sizeof() rather than having to resort to opaque arithmetic in the static
initializers.

While at it, drop the #if IS_ENABLED() check for the declaration of
efi_get_device_by_path(), which is unnecessary, and constify its first
argument as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

When possible, IS_ENABLED() conditionals are preferred over #ifdefs,
given that the latter hide the code from the compiler entirely, which
reduces build test coverage when the option is not enabled.

So replace an instance in the x86 efi startup code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

Reindent the efi_memory_map_data initializer so that all the = signs
are aligned vertically, making the resulting code much easier to read.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

In efi_capsule_write() the value 0 assigned to ret is never used.

Identified with cppcheck.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Link: https://lore.kernel.org/r/20200223205435.114915-1-xypron.glpk@gmx.deSigned-off-by: Ard Biesheuvel <ardb@kernel.org>

Remove an unused variable in __init efi_esrt_init().
Simplify a logical constraint.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Link: https://lore.kernel.org/r/20200223204557.114634-1-xypron.glpk@gmx.deSigned-off-by: Ard Biesheuvel <ardb@kernel.org>

The memory for files is allocated not reallocated.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Link: https://lore.kernel.org/r/20200221191829.18149-1-xypron.glpk@gmx.deSigned-off-by: Ard Biesheuvel <ardb@kernel.org>

Provide descriptions for the functions invoking the EFI_RNG_PROTOCOL.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Link: https://lore.kernel.org/r/20200221114716.4372-1-xypron.glpk@gmx.deSigned-off-by: Ard Biesheuvel <ardb@kernel.org>

Update the description of of efi_relocate_kernel() to match Sphinx style.

Update parameter references in the description of other memory functions
to use @param style.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20200220065317.9096-1-xypron.glpk@gmx.deSigned-off-by: Ard Biesheuvel <ardb@kernel.org>

Provide descriptions of:

* efi_get_memory_map()
* efi_low_alloc_above()
* efi_free()
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20200218063038.3436-1-xypron.glpk@gmx.deSigned-off-by: Ard Biesheuvel <ardb@kernel.org>