- 08 Mar, 2018 18 commits
-
-
Ulf Magnusson authored
Exynos4212 support was removed by commit bca9085e ("ARM: dts: exynos: remove Exynos4212 support (dead code)"). Remove the SOC_EXYNOS4212 dependency from PHY_EXYNOS4X12_USB. Discovered with the https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py script. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Manu Gautam authored
The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Manu Gautam authored
Disable clocks and enable PHY autonomous mode to detect wakeup events when PHY is suspended. Core driver should notify speed to PHY driver to enable LFPS and/or RX_DET interrupts. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Manu Gautam authored
Disable clocks and enable DP/DM wakeup interrupts when suspending PHY. Core driver should notify speed to PHY driver to enable appropriate DP/DM wakeup interrupts polarity in suspend state. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Manu Gautam authored
Add following USB speed related PHY modes: LS (Low Speed), FS (Full Speed), HS (High Speed), SS (Super Speed) Speed related information is required by some QCOM PHY drivers to program PHY monitor resume/remote-wakeup events in suspended state. Speed is needed in order to set correct polarity of wakeup events for detection. E.g. QUSB2 PHY monitors DP/DM line state depending on whether speed is LS or FS/HS to detect resume. Similarly QMP USB3 PHY in SS mode should monitor RX terminations attach/detach and LFPS events depending on SSPHY is active or not. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Manu Gautam authored
QMP V3 USB3 PHY is a DisplayPort (DP) and USB combo PHY with dual RX/TX lanes to support type-c. There is a separate block DP_COM for configuration related to type-c or DP. Add support for dp_com region and secondary rx/tx lanes initialization. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Manu Gautam authored
Update compatible string and clock names for QMP version V3 USB PHY. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Manu Gautam authored
Registers offsets for QMP V3 PHY are changed from previous versions (1/2), update same in header file. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Manu Gautam authored
New revision (v3) of QMP PHY uses different offsets for almost all of the registers. Hence, move these definitions to header file so that updated offsets can be added for QMP v3. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Manu Gautam authored
Use register layout to add additional registers present on QUSB2 PHY V2 version for PHY initialization. Other than new registers on V2, following two register's offset and bit definitions are different: POWERDOWN control and PLL_STATUS. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Manu Gautam authored
Update generic compatible string for QUSB2 V2 PHY. This will allow all targets using QUSB2 V2 use same string. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Manu Gautam authored
New version of QUSB2 PHY has some registers offset changed. Add support to have register layout for a target and update the same in phy_configuration. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Manu Gautam authored
Driver is currently performing PHY reset after starting SERDES/PCS. As per hardware datasheet reset must be done before starting PHY. Hence, update the sequence. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Manu Gautam authored
PHY block or asynchronous reset requires signal to be asserted before de-asserting. Driver is only de-asserting signal which is already low, hence reset operation is a no-op. Fix this by asserting signal first. Also, resetting requires PHY clocks to be turned ON only after reset is finished. Fix that as well. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Manu Gautam authored
PHY must be powered on before turning ON clocks and attempting to initialize it. Driver is exposing separate init and power_on routines for this. Apparently USB dwc3 core driver performs power-on after init. Also, poweron and init for QUSB2 PHY need to be executed together always, hence remove poweron callback from phy_ops and explicitly perform this from init, similar changes needed for poweroff. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Manu Gautam authored
PHY regulators which are enabled from power_on() must be ON before turning-on clocks and initializing it as part of init(). As most of the core drivers perform power_on() after init(), move PHY regulators enable to com_init() and use power_on() to only enable pipe_clk. This pipe_clk is output from PHY and some core drivers e.g. PCIe follow specific sequence after phy_init() that mandates pipe_clk to be enabled from power_on() only. On similar lines move clk_enable from init() to com_init() which executes once for multi lane PHYs. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Vivek Gautam authored
Move from using array of clocks to clk_bulk_* APIs that are available now. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Vivek Gautam authored
Pipe clock comes out of the phy and is available as long as the phy is turned on. Clock controller fails to gate this clock after the phy is turned off and generates a warning. / # [ 33.048561] gcc_usb3_phy_pipe_clk status stuck at 'on' [ 33.048585] ------------[ cut here ]------------ [ 33.052621] WARNING: CPU: 1 PID: 18 at ../drivers/clk/qcom/clk-branch.c:97 clk_branch_wait+0xf0/0x108 [ 33.057384] Modules linked in: [ 33.066497] CPU: 1 PID: 18 Comm: kworker/1:0 Tainted: G W 4.12.0-rc7-00024-gfe926e34c36d-dirty #96 [ 33.069451] Hardware name: Qualcomm Technologies, Inc. DB820c (DT) ... [ 33.278565] [<ffff00000849b27c>] clk_branch_wait+0xf0/0x108 [ 33.286375] [<ffff00000849b2f4>] clk_branch2_disable+0x28/0x34 [ 33.291761] [<ffff0000084868dc>] clk_core_disable+0x5c/0x88 [ 33.297660] [<ffff000008487d68>] clk_core_disable_lock+0x20/0x34 [ 33.303129] [<ffff000008487d98>] clk_disable+0x1c/0x24 [ 33.309384] [<ffff0000083ccd78>] qcom_qmp_phy_poweroff+0x20/0x48 [ 33.314328] [<ffff0000083c53f4>] phy_power_off+0x80/0xdc [ 33.320492] [<ffff00000875c950>] dwc3_core_exit+0x94/0xa0 [ 33.325784] [<ffff00000875c9ac>] dwc3_suspend_common+0x50/0x60 [ 33.331080] [<ffff00000875ca04>] dwc3_runtime_suspend+0x48/0x6c [ 33.336810] [<ffff0000085b82f4>] pm_generic_runtime_suspend+0x28/0x38 [ 33.342627] [<ffff0000085bace0>] __rpm_callback+0x150/0x254 [ 33.349222] [<ffff0000085bae08>] rpm_callback+0x24/0x78 [ 33.354604] [<ffff0000085b9fd8>] rpm_suspend+0xe0/0x4e4 [ 33.359813] [<ffff0000085bb784>] pm_runtime_work+0xdc/0xf0 [ 33.365028] [<ffff0000080d7b30>] process_one_work+0x12c/0x28c [ 33.370576] [<ffff0000080d7ce8>] worker_thread+0x58/0x3b8 [ 33.376393] [<ffff0000080dd4a8>] kthread+0x100/0x12c [ 33.381776] [<ffff0000080836c0>] ret_from_fork+0x10/0x50 Fix this by disabling it as the first thing in phy_exit(). Fixes: e78f3d15 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
- 21 Feb, 2018 5 commits
-
-
Jianguo Sun authored
Add combo phy driver for HiSilicon STB SoCs. This phy can be used as pcie-phy, sata-phy or usb-phy. Changes for v5: - Add bindings doc for Hi3798CV200 peripheral controller, and refer to the bindings of this parent node in combphy bindings doc. Changes for v4: - Instead of relying on device id, add a new property hisilicon,fixed-mode for combphy device that doesn't support mode select but a fixed phy mode. - Move combphy mode select register bits definition to device tree, as it may vary from one device to another. Changes for v3: - Make combphy device be child of peripheral controller and use 'reg' property for mapping combphy configuration registers. - Kill "hisilicon,peripheral-syscon" property, since parent node is just the syscon controller now. - Check combphy id to handle the quirk that combphy0 can not configure mode but always works in USB3 mode. - Unify phy .init and .exit hooks for different combphy instances and work modes, as the only quirk we need to handle is that combphy0 can only work in USB3 mode. - Better naming for clock and reset, 'ref' to 'ref_clk', 'por' to 'por_rst'. Changes for v2: - Move DT bindings into a separate patch. - Drop the spurious newline from drivers/phy/Makefile. - Use the phy type defines in dt-bindings/phy/phy.h. - Use PTR_ERR_OR_ZERO() for checking return from devm_of_phy_provider_register(). - Add USB3 phy support. Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Jianguo Sun authored
It adds the device tree bindings for PCIE/SATA/USB3 combo PHY found on HiSilicon STB SoCs. Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Shawn Guo authored
It adds bindings doc for Hi3798CV200 peripheral controller. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Icenowy Zheng authored
Allwinner R40 features a USB PHY like the one in A64, but with 3 PHYs. Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
Colin Ian King authored
The assignment of map to itself is redundant and can be removed. Detected with Coccinelle. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
- 11 Feb, 2018 9 commits
-
-
Linus Torvalds authored
-
Al Viro authored
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more poll annotation updates from Al Viro: "This is preparation to solving the problems you've mentioned in the original poll series. After this series, the kernel is ready for running for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done as a for bulk search-and-replace. After that, the kernel is ready to apply the patch to unify {de,}mangle_poll(), and then get rid of kernel-side POLL... uses entirely, and we should be all done with that stuff. Basically, that's what you suggested wrt KPOLL..., except that we can use EPOLL... instead - they already are arch-independent (and equal to what is currently kernel-side POLL...). After the preparations (in this series) switch to returning EPOLL... from ->poll() instances is completely mechanical and kernel-side POLL... can go away. The last step (killing kernel-side POLL... and unifying {de,}mangle_poll() has to be done after the search-and-replace job, since we need userland-side POLL... for unified {de,}mangle_poll(), thus the cherry-pick at the last step. After that we will have: - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly)" * 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: annotate ep_scan_ready_list() ep_send_events_proc(): return result via esed->res preparation to switching ->poll() to returning EPOLL... add EPOLLNVAL, annotate EPOLL... and event_poll->event use linux/poll.h instead of asm/poll.h xen: fix poll misannotation smc: missing poll annotations
-
git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull xtense fix from Max Filippov: "Build fix for xtensa architecture with KASAN enabled" * tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix build with KASAN
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds authored
Pull nios2 update from Ley Foon Tan: - clean up old Kconfig options from defconfig - remove leading 0x and 0s from bindings notation in dts files * tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: defconfig: Cleanup from old Kconfig options nios2: dts: Remove leading 0x and 0s from bindings notation
-
Max Filippov authored
The commit 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") removed KASAN_SHADOW_SCALE_SHIFT definition from include/linux/kasan.h and added it to architecture-specific headers, except for xtensa. This broke the xtensa build with KASAN enabled. Define KASAN_SHADOW_SCALE_SHIFT in arch/xtensa/include/asm/kasan.h Reported by: kbuild test robot <fengguang.wu@intel.com> Fixes: 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") Acked-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Krzysztof Kozlowski authored
Remove old, dead Kconfig option INET_LRO. It is gone since commit 7bbf3cae ("ipv4: Remove inet_lro library"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
-
Mathieu Malaterre authored
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This is a follow up to commit 4c9847b7 ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney <ddaney@caviumnetworks.com> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
-
- 10 Feb, 2018 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "Fix a POWER9/powernv INTx regression from the merge window (Alexey Kardashevskiy)" * tag 'pci-v4.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: powerpc/pci: Fix broken INTx configuration via OF
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes to round off the merge window on the block side: - a set of bcache fixes by way of Michael Lyle, from the usual bcache suspects. - add a simple-to-hook-into function for bpf EIO error injection. - fix blk-wbt that mischarectized flushes as reads. Improve the logic so that flushes and writes are accounted as writes, and only reads as reads. From me. - fix requeue crash in BFQ, from Paolo" * tag 'for-linus-20180210' of git://git.kernel.dk/linux-block: block, bfq: add requeue-request hook bcache: fix for data collapse after re-attaching an attached device bcache: return attach error when no cache set exist bcache: set writeback_rate_update_seconds in range [1, 60] seconds bcache: fix for allocator and register thread race bcache: set error_limit correctly bcache: properly set task state in bch_writeback_thread() bcache: fix high CPU occupancy during journal bcache: add journal statistic block: Add should_fail_bio() for bpf error injection blk-wbt: account flush requests correctly
-
git://github.com/dvhart/linux-pdx86Linus Torvalds authored
Pull x86 platform driver updates from Darren Hart: "Mellanox fixes and new system type support. Mostly data for new system types with a correction and an uninitialized variable fix" [ Pulling from github because git.infradead.org currently seems to be down for some reason, but Darren had a backup location - Linus ] * tag 'platform-drivers-x86-v4.16-3' of git://github.com/dvhart/linux-pdx86: platform/x86: mlx-platform: Add support for new 200G IB and Ethernet systems platform/x86: mlx-platform: Add support for new msn201x system type platform/x86: mlx-platform: Add support for new msn274x system type platform/x86: mlx-platform: Fix power cable setting for msn21xx family platform/x86: mlx-platform: Add define for the negative bus platform/x86: mlx-platform: Use defines for bus assignment platform/mellanox: mlxreg-hotplug: Fix uninitialized variable
-
Linus Torvalds authored
Merge tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform updates from Benson Leung: - move cros_ec_dev to drivers/mfd - other small maintenance fixes [ The cros_ec_dev movement came in earlier through the MFD tree - Linus ] * tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: platform/chrome: Use proper protocol transfer function platform/chrome: cros_ec_lpc: Add support for Google Glimmer platform/chrome: cros_ec_lpc: Register the driver if ACPI entry is missing. platform/chrome: cros_ec_lpc: remove redundant pointer request cros_ec: fix nul-termination for firmware build info platform/chrome: chromeos_laptop: make chromeos_laptop const
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ...
-
Alexey Kardashevskiy authored
59f47eff ("powerpc/pci: Use of_irq_parse_and_map_pci() helper") replaced of_irq_parse_pci() + irq_create_of_mapping() with of_irq_parse_and_map_pci(), but neglected to capture the virq returned by irq_create_of_mapping(), so virq remained zero, which caused INTx configuration to fail. Save the virq value returned by of_irq_parse_and_map_pci() and correct the virq declaration to match the of_irq_parse_and_map_pci() signature. Fixes: 59f47eff "powerpc/pci: Use of_irq_parse_and_map_pci() helper" Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: "Makefile changes: - enable unused-variable warning that was wrongly disabled for clang Kconfig changes: - warn about blank 'help' and fix existing instances - fix 'choice' behavior to not write out invisible symbols - fix misc weirdness Coccinell changes: - fix false positive of free after managed memory alloc detection - improve performance of NULL dereference detection" * tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits) kconfig: remove const qualifier from sym_expand_string_value() kconfig: add xrealloc() helper kconfig: send error messages to stderr kconfig: echo stdin to stdout if either is redirected kconfig: remove check_stdin() kconfig: remove 'config*' pattern from .gitignnore kconfig: show '?' prompt even if no help text is available kconfig: do not write choice values when their dependency becomes n coccinelle: deref_null: avoid useless computation coccinelle: devm_free: reduce false positives kbuild: clang: disable unused variable warnings only when constant kconfig: Warn if help text is blank nios2: kconfig: Remove blank help text arm: vt8500: kconfig: Remove blank help text MIPS: kconfig: Remove blank help text MIPS: BCM63XX: kconfig: Remove blank help text lib/Kconfig.debug: Remove blank help text Staging: rtl8192e: kconfig: Remove blank help text Staging: rtl8192u: kconfig: Remove blank help text mmc: kconfig: Remove blank help text ...
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-