- 16 Aug, 2009 1 commit
-
-
Byungho Min authored
S5PC100's the physical IO space starts at 0xe000"0000. To maximize space for vmalloc, the virtual IO space starts at 0xf400"0000 as same as other samsung CPUs(s3c24xx and s3c64xx) do. Signed-off-by:
Byungho Min <bhmin@samsung.com> [ben-linux@fluff.org: subject and description fixup] Signed-off-by:
Ben Dooks <ben-linux@fluff.org>
-
- 14 Aug, 2009 10 commits
-
-
Ben Dooks authored
-
Ben Dooks authored
-
Ben Dooks authored
-
Ben Dooks authored
-
Ben Dooks authored
-
Ben Dooks authored
-
Ben Dooks authored
Add configuration callback for SPI bus 1 on GPD[8..10] and ensure the correct GPIO configuration register definitions in regs-gpio.h Signed-off-by:
Ben Dooks <ben@simtec.co.uk> Signed-off-by:
-
Mark Brown authored
Move the definition of the "generic" IRQ in the process. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Ben Dooks authored
Add support for routing an IRQ from the normal ARM IRQ mechanism to the FIQ input of the processor. Note, also fix a bug where the init_FIQ() function has not been called when CONFIG_FIQ is enabled. Signed-off-by; Ben Dooks <ben@simtec.co.uk> Signed-off-by: -
Mark Brown authored
Allowing us to make the Kconfig a little bit saner. Signed-off-by:
-
- 13 Aug, 2009 4 commits
-
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Matt Hsu authored
Add proper uartcfg for UART port 2,3 and tidy it up on SMDK6410. Signed-off-by:
Matt Hsu <matt@0xlab.org> Signed-off-by:
-
Marek Szyprowski authored
Make ncp_iodesc struct static to clean a public namespace a bit and move it to __initdata section to save memory a bit. Reviewed-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
- 30 Jul, 2009 25 commits
-
-
Peter Korsgaard authored
The s3c64xx devices use the same hardware core as s3c24xx, so move the timer/pwm handling to plat-s3c so it can be used by both. Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
-
Peter Korsgaard authored
Move the s3c_device_nand platform device from plat-s3c24xx to plat-s3c, now that the nand driver also support the s3c64xx devices. Signed-off-by:
-
Peter Korsgaard authored
Add support for the Airgoo HMT (home media terminal) device. The HMT is a tablet device with a s3c6410, a 7" LCD and a number of peripheral connections. For more details of the hardware specs, see: http://article.gmane.org/gmane.linux.debian.devel.embedded/4307Signed-off-by:
-
Ben Dooks authored
Add debugfs support for the cpufreq driver to allow information about the system state to be exported to the user. Signed-off-by:
-
Ben Dooks authored
Add documentation for the S3C24XX style CPUFREQ driver. Signed-off-by:
-
Ben Dooks authored
Add armclk for use with the cpufreq support and anything else that may want it. This clock is just a direct descendant of fclk. Signed-off-by:
-
Ben Dooks authored
Add board support for CPUFREQ with the Simtec BAST board registering the necessary information with the core. Signed-off-by:
-
Ben Dooks authored
Add a sysdev S3C2410A sysdev to allow the differentiation of the S3C2410A from the S3C2410. This is needed for the CPUFREQ code to enable the extra features and update cpu specific information. Signed-off-by:
-
Ben Dooks authored
Add IO bank timing support for S3C2412/S3C2443. Signed-off-by:
-
Ben Dooks authored
Update the mapping of the memory controler registers and add the missing definitions of the register block for the SSMC. The register contents definitions can be found in the pl093 header. Signed-off-by:
-
Ben Dooks authored
Currently map-base.h defines the main virtual address mappings made for all the support S3C SoC series, but does not then define any base for per-cpu mappings to be made from. Add S3C_ADDR_CPU() macro to define an virtual address as an offset from the last of the core mappings. Signed-off-by:
-
Ben Dooks authored
Header to define the standard registers for an PL093 SSMC memory controller. Signed-off-by:
-
Ben Dooks authored
Add core support for frequency scaling on the S3C2412 SoC. Signed-off-by:
-
Ben Dooks authored
Add CPU frequency scalling support to the Simtec Osiris. Signed-off-by:
-
Ben Dooks authored
Add entries to select the crystal to select for each different supported board. This information is then available for anything else requiring this, such as the CPUFreq PLL tables. Signed-off-by:
-
Ben Dooks authored
Add PLL tables for the S3C2440. Signed-off-by:
-
Ben Dooks authored
Add core support for frequency scaling on the S3C2440 SoC. Signed-off-by:
-
Ben Dooks authored
Add PLL table for the S3C2410 SoC. Signed-off-by:
-
Ben Dooks authored
Add core support for frequency scaling on the S3C2410 SoC. Signed-off-by:
-
Ben Dooks authored
Add io-timing support for frequency scaling on the S3C2410 SoC. Signed-off-by:
-
Ben Dooks authored
Add the S3C24XX to the main ARM CPUFreq Kconfig support list. Signed-off-by:
-
Ben Dooks authored
Add ARCH_HAS_CPUFREQ so that each machine config can select it if they have CPUFREQ driver support. This means that the CPUFREQ specific area does not need the if statement updating each time a new machine is added. Signed-off-by:
-
Ben Dooks authored
Move the structure s3c_cpufreq_config from cpu-freq.h to the less advertised cpu-freq-core.h as it is not needed by anything outside the core drivers. Signed-off-by:
-
Ben Dooks authored
Update arch/arm/plat-s3c/include/plat/cpu-freq.h to include kerneldoc style documentation. Signed-off-by:
-
Ben Dooks authored
Add the core of the support for enabling the CPUFreq driver on all S3C24XX based systems. Signed-off-by:
-
