- 31 Jul, 2007 9 commits
-
-
H. Peter Anvin authored
Some BIOSes require that sector buffers not cross 64K boundaries. As a result, we compute a dynamic address on the setup heap. Unfortunately, this address computation was just totally wrong. Signed-off-by:H. Peter Anvin <hpa@zytor.com>
-
H. Peter Anvin authored
End the "No setup signature found..." with a newline (the puts routine will automatically add a carriage return.) Signed-off-by: -
Randy Dunlap authored
Fix comments typos in new x86 boot code. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23: sh: Fix fs.h removal from mm.h regressions. sh: fix get_wchan() for SH kernels without framepointers sh: arch/sh/boot - fix shell usage rtc: rtc-sh: Correct sh_rtc_set_time() for some SH-3 parts. sh: remove support for sh7300 and solution engine 7300 sh: Add sh to the CC_OPTIMIZE_FOR_SIZE dependencies. sh: Kill off virt_to_bus()/bus_to_virt(). sh: sh-sci - fix SH7708 support sh: Restrict DSP support to specific CPUs. sh: Silence sq compile warning on sh4 nommu. sh: Kill the rest of the SE73180 cruft. sh: remove support for sh73180 and solution engine 73180 sh: remove old broken pint code sh: Reclaim beginning of P3 space for vmalloc area. sh: Fix Dreamcast DMA issues. sh: Add kmap_coherent()/kunmap_coherent() interface for SH-4.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: Kill off virt_to_bus()/bus_to_virt(). sh64: Fix irq_intc build failure. sh64: Fix fs.h removal from mm.h regressions.
-
Paul Mundt authored
Follows the SH change. Signed-off-by:Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Needs interrupt.h: CC arch/sh64/kernel/irq_intc.o arch/sh64/kernel/irq_intc.c: In function 'make_intc_irq': arch/sh64/kernel/irq_intc.c:179: error: implicit declaration of function 'disable_irq_nosync' make[1]: *** [arch/sh64/kernel/irq_intc.o] Error 1 Signed-off-by: -
Paul Mundt authored
Signed-off-by: -
Paul Mundt authored
Signed-off-by:
-
- 30 Jul, 2007 31 commits
-
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: Fix a potential NULL pointer dereference in mace_interrupt() in drivers/net/pcmcia/nmclan_cs.c PATCH kernel 2.6.22] PCMCIA-NETDEV : modify smc91c92_cs.c to become SMP safe S2io: Increment received packet count correctly S2io: Fix crash when resetting adapter S2io: Mask spurious interrupts S2IO: Implementing review comments from old patches S2IO: Checking for the return value of pci map function S2IO: Removing MSI support from driver S2IO: Removing 3 buffer mode support from the driver netxen: drop redudant spinlock netxen: Fix interrupt handling for multiport adapters netxen: re-init station address after h/w init tulip: Remove tulip maintainer forcedeth: mac address correct gfar: Fix modpost warning lib8390: comment on locking by Alan Cox Fix a potential NULL pointer dereference in write_bulk_callback() in drivers/net/usb/pegasus.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ipath: Workaround problem of errormask register being overwritten IB/ipath: Fix some issues with buffer cancel and sendctrl register update IB/ipath: Use faster put_tid_2 routine after initialization IB/ipath: Remove unsafe fastrcvint code from interrupt handler IB/ehca: Move extern declarations from .c files to .h files IB/mlx4: Whitespace fix IB/ehca: Fix include order to better match kernel style mlx4_core: Remove kfree() in mlx4_mr_alloc() error flow RDMA/amso1100: Initialize the wait_queue_head_t in the c2_qp structure
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: modules: better error messages when modules fail to load due to a sysfs problem. kobject: update documentation kset: kernel-doc cleanups driver core: revert "device" link creation check stable_api_nonsense.txt: Disambiguate the use of "this" by using "that" to refer to the syscall interface Fix Doc/sysfs-rules typos kernel-doc fixes for PCI and drivers/base/ kobject: put kobject_actions in kobject.h kobject: fix link error when CONFIG_HOTPLUG is disabled HOWTO: sync Japanese HOWTO HOWTO: adjust translation header of Japanese stable_api_nonsense.txt
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: "sparse" cleanups for usb gadgets usb-serial: Fix edgeport regression on non-EPiC devices USB: more pxa2xx_udc dead code removal USB: NIKON D50 is an unusual device USB: drivers/usb/serial/sierra.c: make 3 functions static USB: fix BUG: sleeping function called from invalid context at /home/jeremy/hg/xen/paravirt/linux/drivers/usb/core/urb.c:524, in_atomic():1, irqs_disabled():0 USB: mct_u232: Convert to proper speed handling API digi_acceleport: Drag the driver kicking and screaming into coding style cp2101: Remove broken termios optimisation, use proper speed API USB: Fix a bug in usb_start_wait_urb USB: fix scatterlist PIO case (IOMMU) USB: fix usb_serial_suspend(): buggy code USB: yet another quirky device USB: Add CanonScan LiDE30 to the quirk list USB: even more quirks USB: usb.h kernel-doc additions USB: more quirky devices USB: Don't let usb-storage steal Blackberry Pearl USB: devices misc: Trivial patch to build the IOWARRIOR when it is selected in Kconfig
-
Greg Kroah-Hartman authored
This helps people when debugging problems like the ones that were in the recent -mm releases. Signed-off-by:Greg Kroah-Hartman <gregkh@suse.de>
-
Cornelia Huck authored
Update kobject documentation: - Update structure definitions. - Remove documentation of removed struct subsystem. (First shot, uevent_ops probably need some documentation as well.) Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Randy Dunlap authored
Removed kernel-doc marker (/**) from struct kset -- each struct member still needs annotation. Corrected one parameter name so that kernel-doc matches the macro. Signed-off-by:
-
Cornelia Huck authored
driver core: revert "device" link creation check Commit 2ee97caf introduced an extra check on when to create the "device" symlink. Unfortunately, this breaks input, so let's revert to the old behaviour. Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
-
Juan Lang authored
stable_api_nonsense.txt: Disambiguate the use of "this" by using "that" to refer to the syscall interface Signed-off-by: -
Randy Dunlap authored
Fix typos only (spelling, grammar, duplicate words, etc.). Signed-off-by:
-
Randy Dunlap authored
Fix undocumented function parameters in PCI and drivers/base. Warning(linux-2.6.23-rc1//drivers/pci/pci.c:1526): No description found for parameter 'rq' Warning(linux-2.6.23-rc1//drivers/base/firmware_class.c:245): No description found for parameter 'bin_attr' Signed-off-by:
-
Greg Kroah-Hartman authored
This prevents the extern declaration in the driver core. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: -
Cornelia Huck authored
Leaving kobject_actions[] in kobject_uevent.c, but putting it outside the #ifdef looks indeed like the best solution to me. This way, we avoid adding #ifdef CONFIG_HOTPLUG into core.c, when all other functions called do not need such a thing. Signed-off-by:
-
Tsugikazu Shibata authored
Signed-off-by:
Tsugikazu Shibata <tshibata@ab.jp.nec.com> Signed-off-by:
-
IKEDA, Munehiro authored
Signed-off-by:
IKEDA, Munehiro <m-ikeda@ds.jp.nec.com> Signed-off-by:
-
David Brownell authored
This removes complaints about the gadget stack which are generated by the currrent "sparse": it doesn't like the fact that zero is the null pointer. (Last I checked, C guarantees that's correct ...) Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Adam Kropelin authored
Fix serious regression on non-EPiC edgeport usb-serial devices. Baud rate and MCR/LCR registers are not being written on these models due to apparent copy-n-paste errors introduced with EPiC support. Failure reported by Nick Pasich <Nick@NickAndBarb.net>. Signed-off-by:
Adam Kropelin <akropel1@rochester.rr.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
David Brownell authored
Remove some more dead code from the pxa2xx_udc driver: support for a no-longer-undocumented hardware "test mode". Newer chips made this the default, evidently as the best workaround for deep silicon bugs. The interest was that this seemed to be the only way to kick in the (documented!) double buffering capability. Signed-off-by:
-
Milinevsky Dmitry authored
This short patch allows NIKON D50 to be mounted as UMS[unusual device] on Linux niam 2.6.22-rc7-cfs-v18 #2 PREEMPT Tue Jul 3 22:35:53 EEST 2007 i686 Intel(R) Celeron(R) M processor 1.50GHz GenuineIntel GNU/Linux, some previous kernels... lsusb -v Bus 001 Device 006: ID 04b0:0409 Nikon Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x04b0 Nikon Corp. idProduct 0x0409 bcdDevice 1.00 iManufacturer 1 NIKON iProduct 2 NIKON DSC D50 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Signed-off-by:Milinevsky Dmitry <niam.niam@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: <caglar@pardus.org.tr> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Adrian Bunk authored
This patch makes three needlessly global functions static. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by:
-
Oliver Neukum authored
USB: fix BUG: sleeping function called from invalid context at /home/jeremy/hg/xen/paravirt/linux/drivers/usb/core/urb.c:524, in_atomic():1, irqs_disabled():0 Clearly there's a bug in drivers/usb/serial/usb-serial.c:usb_serial_put(). It shouldn't call kref_put() while holding a spinlock. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Acked-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Alan Cox authored
- The outbreak of acute bracketitus has been cured - The belief that brackets should have spaces everywhere likewise - Various other coding style tweaks - Use baud rates not Bfoo in the speed setup switch Signed-off-by:
-
Alan Cox authored
I've also enabled the commented out support for 7200, 14400, 55854, 127117 and 3686400 baud as you can now set such rates in the kernel. Signed-off-by:
-
Alan Stern authored
This patch (as941) fixes a bug recently added to the USB synchronous API. The status of a completed URB must be preserved separately across a completion callback. Also, the actual_length value isn't available until after the URB has fully completed. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
David Brownell authored
Update the scatterlist logic so that PIO options are also disabled when an IOMMU may have coalesced pages during dma_map_sg() ... it's not just HIGHMEM that can make trouble supporting both PIO and DMA based host controller drivers. There also seems to be a cross-arch issue here, with 64bit powerpc not using an IOMMU define ... and its IOMMU_VMERGE config can always be overridden on the kernel command line. So this is better, but still imperfect. Signed-off-by:
-
Oliver Neukum authored
Am Montag 23 Juli 2007 schrieb Adrian Bunk: > Commit ec22559e added the following > function to drivers/usb/serial/usb-serial.c: > [..] > > The Coverity checker spotted the inconsequent NULL checking for "serial". > > Looking at the code it also doesn't seem to have been intended to always > return 0. Coverity is right. The check for NULL is wrongly done and the error return is lost. Signed-off-by:
-
Oliver Neukum authored
another quirky scanner. Signed-off-by:
-
Johann Felix Soden authored
This patch adds CanoScan N1240U/LiDE30 (Scanner) to the list of quirky USB devices. Signed-off-by:
Johann Felix Soden <johfel@users.sourceforge.net> Signed-off-by:
-
Oliver Neukum authored
The number of quirky devices seems to be large. Signed-off-by:
-
Randy Dunlap authored
Add kernel-doc entries in <linux/usb.h> for: Warning(linux-2.6.22-git12//include/linux/usb.h:162): No description found for parameter 'intf_assoc' Warning(linux-2.6.22-git12//include/linux/usb.h:268): No description found for parameter 'intf_assoc[USB_MAXIADS]' Signed-off-by:
-
