- 03 Dec, 2010 13 commits
-
-
Dimitris Papastamos authored
The snd_soc_codec_conf struct now holds codec specific configuration information. A new configuration option has been added to allow machine drivers to override the compression type set by the codec driver. In the absence of providing an snd_soc_codec_conf struct or when providing one but not setting the compress_type member to anything, the one supplied by the codec driver will be used instead. In all other cases the one set in the snd_soc_codec_conf struct takes effect. Signed-off-by:
Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by:
Jarkko Nikula <jhnikula@gmail.com> Acked-by:
Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Dimitris Papastamos authored
Ensure that the base value of compress_type starts at 1 so that we know whether the machine driver has provided a compress_type for overriding the codec supplied one. Signed-off-by:
-
Dimitris Papastamos authored
We need to keep a copy of the compress_type supplied by the codec driver so that we can override it if necessary with whatever the machine driver has provided us with. The reason for not modifying the codec->driver struct directly is that ideally we'd like to keep it const. Adjust the code in soc-cache and soc-core to make use of the compress_type member in the snd_soc_codec struct. Signed-off-by:
-
Jarkko Nikula authored
Blind copy of codec finding algorithm from soc_bind_dai_link does not work in soc_probe_aux_dev if matching codec name is not found. In that case the code falls through and tries to start the probing procedure with invalid codec pointer. Fix this and add an error print showing the codec name that cannot be found. Signed-off-by:
-
Axel Lin authored
In alc5623_i2c_probe(), the default case for checking alc5623->id behaves the same as case 0x23. However, In alc5623_probe() the default case for checking alc5623->id becomes to be the same as case 0x21. This makes the meaning of default case inconsistent. Since we have checked codec id in alc5623_i2c_probe() by comparing vid2 with id->driver_data, it is not possible to run into the default case now. In case we may add more supported devices to alc5623_i2c_table in the future, this patch changes the default case return -EINVAL to let people know that they should not run into this case. They should also add a new case accordingly for the new id. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by:
-
Kuninori Morimoto authored
Current FSI driver was checking register range on fsi_master_xxx function. This runtime check was added to avoid an illegal access from wrong/mistake implementation. But it is useless check under the correct implementation. This patch escape runtime check by using macro technique. If there is wrong implementation, it will be compile error. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by:
-
Kuninori Morimoto authored
Current FSI driver was checking register range on fsi_reg_xxx function. This runtime check was added to avoid an illegal access from wrong/mistake implementation. But it is useless check under the correct implementation. This patch escape runtime check by using macro technique. If there is wrong implementation, it will be compile error. Signed-off-by:
-
Kuninori Morimoto authored
There was a strange part where fsi->xxx had been used for fsi_master_xxx function instead of master->xxx in current FSI. This patch modify it. Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Mark Brown authored
We shouldn't be assigning to the driver structure (which really ought to be const, further patch to follow) though there's unlikely to be any actual problem except in the unlikely case that two devices with the same driver but different bus types appear in the same system. Signed-off-by:
-
Mark Brown authored
Neither drivers nor the core should be fiddling with the actual ops structure at runtime. Signed-off-by:
-
Mark Brown authored
Silly little grammar nit but it bugs the hell out of me. Signed-off-by:
-
- 02 Dec, 2010 4 commits
-
-
Mark Brown authored
Update some of the default configuration for the device to improve the performance. Signed-off-by:
-
Mark Brown authored
The deemphasis filter should be selected based on sample rate for optimal performance. Signed-off-by:
-
Mark Brown authored
This is much more maintainable than the array. Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
- 01 Dec, 2010 8 commits
-
-
Axel Lin authored
The mute/unmute is controled by SMUTE (Soft Mute Control bit): 0: Normal Operation (Default) 1: DAC outputs soft-muted I think this change improves readability. Signed-off-by: -
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Mark Brown authored
The paramters of the WM8958 multiband compressor can be tuned by the user for their system using a graphical configuration tool on the host. Allow the user to specify a set of such paramters in platform data and select between them at runtime. Signed-off-by:
-
Mark Brown authored
We need a post notification as we need to shut down the MBC after the data stops flowing rather than before. Signed-off-by:
-
Mark Brown authored
-
Jarkko Nikula authored
Commit 2eea392d "ASoC: Add support for optional auxiliary dailess codecs" causes a build failure in soc-core.c: soc_probe_aux_dev since code tries to access non-existing struct snd_soc_dapm_context and struct snd_soc_card members. Root cause for this was a double accident. Author sent the RFC patch from top of another patch set and the RFC got committed. Fix the build failure by removing the code line that depends on that another patch set. Signed-off-by:
-
Dimitris Papastamos authored
According to the datasheet the bypass path enable/disable is bit 3 therefore we need 0x8 and not 0x4. Signed-off-by:
-
- 30 Nov, 2010 9 commits
-
-
Jarkko Nikula authored
This makes possible to register auxiliary dailess codecs in a machine driver. Term dailess is used here for amplifiers and codecs without DAI or DAI being unused. Dailess auxiliary codecs are kept in struct snd_soc_aux_dev and those codecs are probed after initializing the DAI links. There are no major differences between DAI link codecs and dailess codecs in ASoC core point of view. DAPM handles them equally and sysfs and debugfs directories for dailess codecs are similar except the pmdown_time node is not created. Only suspend and resume functions are modified to traverse all probed codecs instead of DAI link codecs. Example below shows a dailess codec registration. struct snd_soc_aux_dev foo_aux_dev[] = { { .name = "Amp", .codec_name = "codec.2", .init = foo_init2, }, }; static struct snd_soc_card card = { ... .aux_dev = foo_aux_dev, .num_aux_devs = ARRAY_SIZE(foo_aux_dev), }; Signed-off-by: -
Dimitris Papastamos authored
The bitmap_zero() nbits argument was improperly set to reg_size but the underlying buffer was bmp_size long. This caused the memset to zero past the end of the allocated buffer and into the kernel heap causing strange kernel crashes sometimes by overwriting critical kernel structures. Signed-off-by:
-
Mark Brown authored
-
Axel Lin authored
Simplify pm860x_probe error handling and return actual error code we got. Signed-off-by:
-
Kuninori Morimoto authored
Current FSI-Ak4642 device had niche settings which were FSI2-A-AK4643 and FSI-A-AK4642. This patch add platform_device_id which can control FSI/FSI2, PortA/PortB, AK4642/AK4643 from platform data. Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Acked-by:
-
Daniel Glöckner authored
When the s6105-ipcam ASoC driver had been converted to the multi-component API, a single reference to a former structure element remained, blocking successful compilation. Signed-off-by:
Daniel Glöckner <daniel-gl@gmx.net> Acked-by:
-
Daniel Glöckner authored
s6000_soc_platform has lost its forward declaration and there no longer is a name element in it, so use a string constant when calling request_irq. Signed-off-by:
-
Daniel Glöckner authored
A semicolon was missing. Signed-off-by:
-
Axel Lin authored
In nuc900_dma_hw_params(), if snd_pcm_lib_malloc_pages failed it returns without calling spin_unlock_irqrestore(). Since snd_pcm_lib_malloc_pages() does not touch struct nuc900_audio, we don't need to hold the lock while calling snd_pcm_lib_malloc_pages(). Fix it by moving spin_lock_irqsave() down to after snd_pcm_lib_malloc_pages(). In nuc900_dma_prepare(), spin_unlock_irqrestore() is missing in the error path. Fix it by removing the return in default case. Signed-off-by:
Wan ZongShun <mcuos.com@gmail.com> Acked-by:
-
- 29 Nov, 2010 6 commits
-
-
Mark Brown authored
-
Axel Lin authored
Otherwise, calling dev_get_drvdata in p1022_ds_remove returns NULL. Signed-off-by:
Timur Tabi <timur@freescale.com> Acked-by:
-
Axel Lin authored
Otherwise, calling dev_get_drvdata in mpc8610_hpcd_remove returns NULL. Signed-off-by:
-
Axel Lin authored
I think this unneededd !! operations just reduce the readability. Signed-off-by:
-
Axel Lin authored
This patch fixes below error: CC sound/soc/nuc900/nuc900-pcm.o sound/soc/nuc900/nuc900-pcm.c: In function 'nuc900_dma_open': sound/soc/nuc900/nuc900-pcm.c:267: error: 'nuc900_ac97_data' undeclared (first use in this function) sound/soc/nuc900/nuc900-pcm.c:267: error: (Each undeclared identifier is reported only once sound/soc/nuc900/nuc900-pcm.c:267: error: for each function it appears in.) sound/soc/nuc900/nuc900-pcm.c: At top level: sound/soc/nuc900/nuc900-pcm.c:337: error: expected ',' or ';' before 'static' sound/soc/nuc900/nuc900-pcm.c:354: error: 'nuc900_soc_platform_probe' undeclared here (not in a function) make[3]: *** [sound/soc/nuc900/nuc900-pcm.o] Error 1 make[2]: *** [sound/soc/nuc900] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by:
-
Axel Lin authored
This patch fixes below compile warning: CC sound/soc/nuc900/nuc900-ac97.o sound/soc/nuc900/nuc900-ac97.c:300: warning: initialization from incompatible pointer type sound/soc/nuc900/nuc900-ac97.c:301: warning: initialization from incompatible pointer type Signed-off-by:
-
