There is a certain idiom used in multiple places in btrfs' codebase,
dealing with flushing an ordered range. Factor this in a separate
function that can be reused. Future patches will replace the existing
code with that function.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

At the context of btrfs_run_delalloc_range(), we haven't started/joined
a transaction, thus even something went wrong, we can't and won't abort
transaction, thus no way to make the fs RO.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Add trace event for update_bytes_pinned() and update_bytes_may_use() to
detect underflow better.

The output would be something like (only showing data part):

  ## Buffered write start, 16K total ##
  2255.954 xfs_io/860 btrfs:update_bytes_may_use:(nil)U: type=DATA old=0 diff=4096
  2257.169 sudo/860 btrfs:update_bytes_may_use:(nil)U: type=DATA old=4096 diff=4096
  2257.346 sudo/860 btrfs:update_bytes_may_use:(nil)U: type=DATA old=8192 diff=4096
  2257.542 sudo/860 btrfs:update_bytes_may_use:(nil)U: type=DATA old=12288 diff=4096

  ## Delalloc start ##
  3727.853 kworker/u8:3-e/700 btrfs:update_bytes_may_use:(nil)U: type=DATA old=16384 diff=-16384

  ## Space cache update ##
  3733.132 sudo/862 btrfs:update_bytes_may_use:(nil)U: type=DATA old=0 diff=65536
  3733.169 sudo/862 btrfs:update_bytes_may_use:(nil)U: type=DATA old=65536 diff=-65536
  3739.868 sudo/862 btrfs:update_bytes_may_use:(nil)U: type=DATA old=0 diff=65536
  3739.891 sudo/862 btrfs:update_bytes_may_use:(nil)U: type=DATA old=65536 diff=-65536

These two trace events will allow bcc tool to probe btrfs_space_info
changes and detect underflow with more details (e.g. backtrace for each
update).
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Just add a safe net for btrfs_space_info member updating.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There are several places that call nr_data_stripes, but this value does
not change.
Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: David Sterba <dsterba@suse.com>

The helper lacks the btrfs_ prefix and the parameter is the raw
blockgroup type, so none of the callers has to do the flags -> index
conversion.
Signed-off-by: David Sterba <dsterba@suse.com>

Merge the repeated code before the if-else block.
Signed-off-by: David Sterba <dsterba@suse.com>

The raid_attr table is now 7 * 56 = 392 bytes long, consisting of just
small numbers so we don't have to use ints. New size is 7 * 32 = 224,
saving 3 cachelines.
Signed-off-by: David Sterba <dsterba@suse.com>

Factor the sequence of ifs to a helper, the 'data stripes' here means
the number of stripes without redundancy and parity.
Signed-off-by: David Sterba <dsterba@suse.com>

The factor is the number of copies.
Signed-off-by: David Sterba <dsterba@suse.com>

Replace open coded list of the profiles by selecting them from the
raid_attr table. The criteria are now more explicit, we need profiles
that have more than 1 copy of the data or can reconstruct the data with
a missing device.
Signed-off-by: David Sterba <dsterba@suse.com>

Iterate over the table and gather all allowed profiles for a given
number of devices, instead of open coding.
Signed-off-by: David Sterba <dsterba@suse.com>

The number of tolerated failures is stored in the raid_attr table, use
it.
Signed-off-by: David Sterba <dsterba@suse.com>

The dev_max constraints are defined in the raid_attr table, use it
instead of open-coding it.
Signed-off-by: David Sterba <dsterba@suse.com>

fs_info::mapping_tree is the physical<->logical mapping tree and uses
the same underlying structure as extents, but is embedded to another
structure. There are no other members and this indirection is useless.
No functional change.
Signed-off-by: David Sterba <dsterba@suse.com>

The minimum number of devices for RAID5 is 2, though this is only a bit
expensive RAID1, and for RAID6 it's 3, which is a triple copy that works
only 3 devices.

mkfs.btrfs allows that and mounting such filesystem also works, so the
conversion via balance filters is inconsistent with the others and we
should not prevent it.
Signed-off-by: David Sterba <dsterba@suse.com>

The list of profiles in btrfs_chunk_max_errors lists DUP as a profile
DUP able to tolerate 1 device missing. Though this profile is special
with 2 copies, it still needs the device, unlike the others.

Looking at the history of changes, thre's no clear reason why DUP is
there, functions were refactored and blocks of code merged to one
helper.

d20983b4 Btrfs: fix writing data into the seed filesystem
  - factor code to a helper

de11cc12 Btrfs: don't pre-allocate btrfs bio
  - unrelated change, DUP still in the list with max errors 1

a236aed1 Btrfs: Deal with failed writes in mirrored configurations
  - introduced the max errors, leaves DUP and RAID1 in the same group
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This code was first introduced in 5f39d397 ("Btrfs: Create
extent_buffer interface for large blocksizes") and the function was
named btrfs_unlink_trans. It later got renamed to __btrfs_unlink_inode
and finally commit 16cdcec7 ("btrfs: implement delayed inode items
operation") changed the way inodes are deleted and obviated the need for
those two members.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ replace changelog by Nikolay's version ]
Signed-off-by: David Sterba <dsterba@suse.com>

This is a leftover from 312c89fb ("btrfs: cleanup btrfs_mount()
using btrfs_mount_root()"), the mode was used for opening devices that's
not done here anymore.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

In function do_trimming(), block_group->lock should be unlocked first,
as the locks should be released in the reverse order. This does not
cause problems but should follow the best practices.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>

Under certain conditions, we could have strange file extent item in log
tree like:

  item 18 key (69599 108 397312) itemoff 15208 itemsize 53
	extent data disk bytenr 0 nr 0
	extent data offset 0 nr 18446744073709547520 ram 18446744073709547520

The num_bytes + ram_bytes overflow 64 bit type.

For num_bytes part, we can detect such overflow along with file offset
(key->offset), as file_offset + num_bytes should never go beyond u64.

For ram_bytes part, it's about the decompressed size of the extent, not
directly related to the size.
In theory it is OK to have a large value, and put extra limitation
on RAM bytes may cause unexpected false alerts.

So in tree-checker, we only check if the file offset and num bytes
overflow.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This is already done in btrfs_init_dev_replace_tgtdev which is the first
phase of device replace, called before doing scrub. During that time
exclusive lock is held. Additionally btrfs_fs_device::commit_total_bytes
is always set based on the size of the underlying block device which
shouldn't change once set. This makes the 2nd assignment of the variable
in the finishing phase redundant.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Part of device replace involves writing an item to the device root
containing information about pending replace operations. Currently space
for this item is not being explicitly reserved so this works thanks to
presence of global reserve. While not fatal it's not a good practice.
Let's be explicit about space requirement of device replace and reserve
space when starting the transaction.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There are only 2 branches which goto leave label with need_unlock set
to true. Essentially need_unlock is used as a substitute for directly
calling up_write. Since the branches needing this are only 2 and their
context is not that big it's more clear to just call up_write where
required. No functional changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_init_dev_replace_tgtdev reads certain values from the source
device (such as commit_total_bytes) which are updated during transaction
commit. Currently this function is called before committing any pending
transaction, leading to possibly reading outdated values.

Fix this by moving the function below the transaction commit, at this
point the EXCL_OP bit it set hence once transaction is complete the
total size of the device cannot be changed (it's usually changed by
resize/remove ops which are blocked).

Fixes: 9e271ae2 ("Btrfs: kernel operation should come after user input has been verified")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This WARN_ON can never trigger because src_device cannot be null.
btrfs_find_device_by_devspec always returns either an error or a valid
pointer to the device. Just remove it.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There is no point in holding btrfs_fs_devices::device_list_mutex
while initialising fields of the not-yet-published device. Instead,
hold the mutex only when the newly initialised device is being
published. I think holding device_list_mutex here is redundant
altogether, because at this point BTRFS_FS_EXCL_OP is set which
prevents device removal/addition/balance/resize to occur.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Using sync_blockdev makes it plain obvious what's happening. No
functional changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_check_shared looks up parents of a given extent and uses ulists
for that. These are allocated and freed repeatedly. Preallocation in the
caller will avoid the overhead and also allow us to use the GFP_KERNEL
as it is happens before the extent locks are taken.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Currently, there's only check for fast crc32c implementation on X86,
based on the CPU flags. This is used to decide if checksumming should be
offloaded to worker threads or can be calculated by the caller.

As there are more architectures that implement a faster version of
crc32c (ARM, SPARC, s390, MIPS, PowerPC), also there are specialized hw
cards.

The detection is based on driver name, all generic C implementations
contain 'generic', while the specialized versions do not. Alternatively
the priority could be used, but this is not currently provided by the
crypto API.

The flag is set per-filesystem at mount time and used for the offloading
decisions.
Signed-off-by: David Sterba <dsterba@suse.com>

Instead of using @sign to determine whether we're adding or subtracting.
Even it only has 3 callers, it's still (and in fact already caused
problem in the past) confusing to use.

Refactor add_pinned_bytes() to add_pinned_bytes() and sub_pinned_bytes()
to explicitly show what we're doing.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pull powerpc fix from Michael Ellerman:
 "One fix for a regression in my commit adding KUAP (Kernel User Access
  Prevention) on Radix, which incorrectly touched the AMR in the early
  machine check handler.

  Thanks to Nicholas Piggin"

* tag 'powerpc-5.2-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s/exception: Fix machine check early corrupting AMR

Pull SMP fixes from Thomas Gleixner:
 "Two small changes for the cpu hotplug code:

   - Prevent out of bounds access which actually might crash the machine
     caused by a missing bounds check in the fail injection code

   - Warn about unsupported migitation mode command line arguments to
     make people aware that they typoed the paramater. Not necessarily a
     fix but quite some people tripped over that"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Fix out-of-bounds read when setting fail state
  cpu/speculation: Warn on unsupported mitigations= parameter

Pull x86 fixes from Ingo Molnar:
 "Misc fixes all over the place:

   - might_sleep() atomicity fix in the microcode loader

   - resctrl boundary condition fix

   - APIC arithmethics bug fix for frequencies >= 4.2 GHz

   - three 5-level paging crash fixes

   - two speculation fixes

   - a perf/stacktrace fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Fall back to using frame pointers for generated code
  perf/x86: Always store regs->ip in perf_callchain_kernel()
  x86/speculation: Allow guests to use SSBD even if host does not
  x86/mm: Handle physical-virtual alignment mismatch in phys_p4d_init()
  x86/boot/64: Add missing fixup_pointer() for next_early_pgt access
  x86/boot/64: Fix crash if kernel image crosses page table boundary
  x86/apic: Fix integer overflow on 10 bit left shift of cpu_khz
  x86/resctrl: Prevent possible overrun during bitmap operations
  x86/microcode: Fix the microcode load on CPU hotplug for real

Pull perf fixes from Ingo Molnar:
 "Various fixes, most of them related to bugs perf fuzzing found in the
  x86 code"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/regs: Use PERF_REG_EXTENDED_MASK
  perf/x86: Remove pmu->pebs_no_xmm_regs
  perf/x86: Clean up PEBS_XMM_REGS
  perf/x86/regs: Check reserved bits
  perf/x86: Disable extended registers for non-supported PMUs
  perf/ioctl: Add check for the sample_period value
  perf/core: Fix perf_sample_regs_user() mm check

Pull irq fixes from Ingo Molnar:
 "Diverse irqchip driver fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Fix command queue pointer comparison bug
  irqchip/mips-gic: Use the correct local interrupt map registers
  irqchip/ti-sci-inta: Fix kernel crash if irq_create_fwspec_mapping fail
  irqchip/irq-csky-mpintc: Support auto irq deliver to all cpus

Pull EFI fixes from Ingo Molnar:
 "Four fixes:
   - fix a kexec crash on arm64
   - fix a reboot crash on some Android platforms
   - future-proof the code for upcoming ACPI 6.2 changes
   - fix a build warning on x86"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efibc: Replace variable set function in notifier call
  x86/efi: fix a -Wtype-limits compilation warning
  efi/bgrt: Drop BGRT status field reserved bits check
  efi/memreserve: deal with memreserve entries in unmapped memory

Pull power management fix from Rafael Wysocki:
 "Avoid skipping bus-level PCI power management during system resume for
  PCIe ports left in D0 during the preceding suspend transition on
  platforms where the power states of those ports can change out of the
  PCI layer's control"

* tag 'pm-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PCI: PM: Avoid skipping bus-level PM on platforms without ACPI