Pull block fixes from Jens Axboe:
 "Small set of fixes that should go into this series. This contains:

   - compat signal mask fix for io_uring (Arnd)

   - EAGAIN corner case for direct vs buffered writes for io_uring
     (Roman)

   - NVMe pull request from Christoph with various little fixes

   - sbitmap ws_active fix, which caused a perf regression for shared
     tags (me)

   - sbitmap bit ordering fix (Ming)

   - libata on-stack DMA fix (Raymond)"

* tag 'for-linus-20190329' of git://git.kernel.dk/linux-block:
  nvmet: fix error flow during ns enable
  nvmet: fix building bvec from sg list
  nvme-multipath: relax ANA state check
  nvme-tcp: fix an endianess miss-annotation
  libata: fix using DMA buffers on stack
  io_uring: offload write to async worker in case of -EAGAIN
  sbitmap: order READ/WRITE freed instance and setting clear bit
  blk-mq: fix sbitmap ws_active for shared tags
  io_uring: fix big-endian compat signal mask handling
  blk-mq: update comment for blk_mq_hctx_has_pending()
  blk-mq: use blk_mq_put_driver_tag() to put tag

Pull ceph fixes from Ilya Dryomov:
 "A patch to avoid choking on multipage bvecs in the messenger and a
  small use-after-free fix"

* tag 'ceph-for-5.1-rc3' of git://github.com/ceph/ceph-client:
  ceph: fix use-after-free on symlink traversal
  libceph: fix breakage caused by multipage bvecs

Pull xfs fixes from Darrick Wong:
 "Here are a few fixes for some corruption bugs and uninitialized
  variable problems. The few patches here have gone through a few days
  worth of fstest runs with no new problems observed.

  Changes since last update:

   - Fix a bunch of static checker complaints about uninitialized
     variables and insufficient range checks.

   - Avoid a crash when incore extent map data are corrupt.

   - Disallow FITRIM when we haven't recovered the log and know the
     metadata are stale.

   - Fix a data corruption when doing unaligned overlapping dio writes"

* tag 'xfs-5.1-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: serialize unaligned dio writes against all other dio writes
  xfs: prohibit fstrim in norecovery mode
  xfs: always init bma in xfs_bmapi_write
  xfs: fix btree scrub checking with regards to root-in-inode
  xfs: dabtree scrub needs to range-check level
  xfs: don't trip over uninitialized buffer on extent read of corrupted inode

Pull drm fixes from Dave Airlie:
 "Weekly fixes roundup, nothing two serious, some usb device regressions
  are fixed, and i915 GVT has a bigger fix but otherwise not really much
  happening here.

  core:
   - fb bpp check regression fix
   - release/unplug fix
   - use after free fixes

  i915:
   - fix mmap range checks
   - fix gvt ppgtt mm LRU list access races
   - fix selftest error pointer check
   - fix a macro definition (pre-emptive for potential further backports)
   - fix one AML SKU ULX status

  amdgpu:
   - one variable refresh rate fix

  udl:
   - fix EDID reading

  tegra:
   - build/warning fixes

  meson:
   - cleanup path fixes
   - TMDS clock filter fix

  rockchip:
   - NV12 buffers and scalar fix"

* tag 'drm-fixes-2019-03-29' of git://anongit.freedesktop.org/drm/drm: (22 commits)
  drm/i915/icl: Fix VEBOX mismatch BUG_ON()
  drm/i915/selftests: Fix an IS_ERR() vs NULL check
  drm/i915: Mark AML 0x87CA as ULX
  drm/meson: fix TMDS clock filtering for DMT monitors
  drm/meson: Uninstall IRQ handler
  drm/meson: Fix invalid pointer in meson_drv_unbind()
  drm/udl: Refactor edid retrieving in UDL driver (v2)
  drm: Fix drm_release() and device unplug
  drm/fb: avoid setting 0 depth.
  drm/tegra: vic: Fix implicit function declaration warning
  drm/tegra: hub: Fix dereference before check
  drm/i915/icl: Fix the TRANS_DDI_FUNC_CTL2 bitfield macro
  drm/amd/display: Only allow VRR when vrefresh is within supported range
  drm/rockchip: vop: reset scale mode when win is disabled
  drm/vkms: fix use-after-free when drm_gem_handle_create() fails
  drm/vgem: fix use-after-free when drm_gem_handle_create() fails
  drm/i915/gvt: Add mutual lock for ppgtt mm LRU list
  drm/i915/gvt: Only assign ppgtt root at dispatch time
  drm/i915/gvt: Don't submit request for error workload dispatch
  drm/i915/gvt: stop scheduling workload when vgpu is inactive
  ...

Merge tag 'drm-intel-fixes-2019-03-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.2-rc3:
- fix mmap range checks
- fix gvt ppgtt mm LRU list access races
- fix selftest error pointer check
- fix a macro definition (pre-emptive for potential further backports)
- fix one AML SKU ULX status
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sgv6ao7a.fsf@intel.com

- One freesync/VRR fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190328033124.26009-1-alexander.deucher@amd.com

Pull PCI fixes from Bjorn Helgaas:
 "PCI fixes:

   - Clear level-triggered interrupts for the bandwidth notification
     supported added for v5.1 (Alexandru Gagniuc)

   - Clear bandwidth notification interrupts before enabling them (Lukas
     Wunner)

   - Report post-enumeration bandwidth changes only once for
     multi-function devices (Lukas Wunner)"

* tag 'pci-v5.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/LINK: Deduplicate bandwidth reports for multi-function devices
  PCI/LINK: Clear bandwidth notification interrupt before enabling it
  PCI/LINK: Supply IRQ handler so level-triggered IRQs are acked

Pull NVMe fixes from Christoph:

"A few accumulated small fixes:

 - fix an endianess misannotation that sneaked in this merge window in
   nvme-tcp (me)
 - fix nvme-loop to handle multi-page segments (Ming)
 - fix error handling in the nvmet configfs code (Max)
 - add a missing requeue point in the multipath code (Martin George)"

* 'nvme-5.1' of git://git.infradead.org/nvme:
  nvmet: fix error flow during ns enable
  nvmet: fix building bvec from sg list
  nvme-multipath: relax ANA state check
  nvme-tcp: fix an endianess miss-annotation

In case we fail to enable p2pmem on the current namespace, disable the
backing store device before exiting.

Cc: Stephen Bates <sbates@raithlin.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

There are two mistakes for building bvec from sg list for file
backed ns:

- use request data length to compute number of io vector, this way
doesn't consider sg->offset, and the result may be smaller than required
io vectors

- bvec->bv_len isn't capped by sg->length

This patch fixes this issue by building bvec from sg directly, given
the whole IO stack is ready for multi-page bvec.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 3a85a5de ("nvme-loop: add a NVMe loopback host driver")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

When undergoing state transitions I/O might be requeued, hence
we should always call nvme_mpath_set_live() to schedule requeue_work
whenever the nvme device is live, independent on whether the
old state was live or not.
Signed-off-by: Martin George <marting@netapp.com>
Signed-off-by: Gargi Srinivas <sring@netapp.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme_tcp_end_request just takes the status value and the converts
it to little endian as well as shifting for the phase bit.

Fixes: 43ce38a6d823 ("nvme-tcp: support C2HData with SUCCESS flag")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

The marshalling of AFS.StoreData, AFS.StoreData64 and YFS.StoreData64 calls
generated by ->setattr() ops for the purpose of expanding a file is
incorrect due to older documentation incorrectly describing the way the RPC
'FileLength' parameter is meant to work.

The older documentation says that this is the length the file is meant to
end up at the end of the operation; however, it was never implemented this
way in any of the servers, but rather the file is truncated down to this
before the write operation is effected, and never expanded to it (and,
indeed, it was renamed to 'TruncPos' in 2014).

Fix this by setting the position parameter to the new file length and doing
a zero-lengh write there.

The bug causes Xwayland to SIGBUS due to unexpected non-expansion of a file
it then mmaps.  This can be tested by giving the following test program a
filename in an AFS directory:

	#include <stdio.h>
	#include <stdlib.h>
	#include <unistd.h>
	#include <fcntl.h>
	#include <sys/mman.h>
	int main(int argc, char *argv[])
	{
		char *p;
		int fd;
		if (argc != 2) {
			fprintf(stderr,
				"Format: test-trunc-mmap <file>\n");
			exit(2);
		}
		fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC);
		if (fd < 0) {
			perror(argv[1]);
			exit(1);
		}
		if (ftruncate(fd, 0x140008) == -1) {
			perror("ftruncate");
			exit(1);
		}
		p = mmap(NULL, 4096, PROT_READ | PROT_WRITE,
			 MAP_SHARED, fd, 0);
		if (p == MAP_FAILED) {
			perror("mmap");
			exit(1);
		}
		p[0] = 'a';
		if (munmap(p, 4096) < 0) {
			perror("munmap");
			exit(1);
		}
		if (close(fd) < 0) {
			perror("close");
			exit(1);
		}
		exit(0);
	}

Fixes: 31143d5d ("AFS: implement basic file write support")
Reported-by: Jonathan Billings <jsbillin@umich.edu>
Tested-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update the mount API docs to reflect recent changes to the code.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull s390 fixes from Martin Schwidefsky:
 "Improvements and bug fixes for 5.1-rc2:

   - Fix early free of the channel program in vfio

   - On AP device removal make sure that all messages are flushed with
     the driver still attached that queued the message

   - Limit brk randomization to 32MB to reduce the chance that the heap
     of ld.so is placed after the main stack

   - Add a rolling average for the steal time of a CPU, this will be
     needed for KVM to decide when to do busy waiting

   - Fix a warning in the CPU-MF code

   - Add a notification handler for AP configuration change to react
     faster to new AP devices"

* tag 's390-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cpumf: Fix warning from check_processor_id
  zcrypt: handle AP Info notification from CHSC SEI command
  vfio: ccw: only free cp on final interrupt
  s390/vtime: steal time exponential moving average
  s390/zcrypt: revisit ap device remove procedure
  s390: limit brk randomization to 32MB

Pull ARM SoC fixes from Arnd Bergmann:
 "A couple of minor fixes only for now

   - fix for incorrect DMA channels on Renesas R-Car

   - Broadcom bcm2835 error handling fixes

   - Kconfig dependency fixes for bcm2835 and davinci

   - CPU idle wakeup fix for i.MX6

   - MMC regression on Tegra186

   - fix incorrect phy settings on one imx board"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186
  ARM: dts: nomadik: Fix polarity of SPI CS
  ARM: davinci: fix build failure with allnoconfig
  ARM: imx_v4_v5_defconfig: enable PWM driver
  ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
  ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
  ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
  ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
  ARM: dts: pfla02: increase phy reset duration
  ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
  ARM: imx51: fix a leaked reference by adding missing of_node_put
  ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
  arm64: bcm2835: Add missing dependency on MFD_CORE.
  ARM: dts: bcm283x: Fix hdmi hpd gpio pull
  soc: bcm: bcm2835-pm: Fix error paths of initialization.
  soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
  arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels
  arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels

When CONFIG_VMAP_STACK=y, __pa() returns incorrect physical address for
a stack virtual address. Stack DMA buffers must be avoided.
Signed-off-by: raymond pang <raymondpangxd@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

GT VEBOX DISABLE is only 4 bits wide but it was using a 8 bits wide
mask, the remaning reserved bits is set to 0 causing 4 more
nonexistent VEBOX engines being detected as enabled, triggering the
BUG_ON() because of mismatch between vebox_mask and newly added
VEBOX_MASK().

[   64.081621] [drm:intel_device_info_init_mmio [i915]] vdbox enable: 0005, instances: 0005
[   64.081763] [drm:intel_device_info_init_mmio [i915]] vebox enable: 00f1, instances: 0001
[   64.081825] intel_device_info_init_mmio:925 GEM_BUG_ON(vebox_mask != ({ unsigned int first__ = (VECS0); unsigned int count__ = (2); ((&(dev_priv)->__info)->engine_mask & (((~0UL) - (1UL << (first__)) + 1) & (~0UL >> (64 - 1 - (first__ + count__ - 1))))) >> first__; }))
[   64.082047] ------------[ cut here ]------------
[   64.082054] kernel BUG at drivers/gpu/drm/i915/intel_device_info.c:925!

BSpec: 20680
Fixes: 26376a7e ("drm/i915/icl: Check for fused-off VDBOX and VEBOX instances")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326230223.26336-1-jose.souza@intel.com
(cherry picked from commit 547fcf9b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Function __hw_perf_event_init() used a CPU variable without
ensuring CPU preemption has been disabled. This caused the
following warning in the kernel log:

  [ 7.277085] BUG: using smp_processor_id() in preemptible
                 [00000000] code: cf-csdiag/1892
  [ 7.277111] caller is cf_diag_event_init+0x13a/0x338
  [ 7.277122] CPU: 10 PID: 1892 Comm: cf-csdiag Not tainted
                 5.0.0-20190318.rc0.git0.9e1a11e0f602.300.fc29.s390x+debug #1
  [ 7.277131] Hardware name: IBM 2964 NC9 712 (LPAR)
  [ 7.277139] Call Trace:
  [ 7.277150] ([<000000000011385a>] show_stack+0x82/0xd0)
  [ 7.277161]  [<0000000000b7a71a>] dump_stack+0x92/0xd0
  [ 7.277174]  [<00000000007b7e9c>] check_preemption_disabled+0xe4/0x100
  [ 7.277183]  [<00000000001228aa>] cf_diag_event_init+0x13a/0x338
  [ 7.277195]  [<00000000002cf3aa>] perf_try_init_event+0x72/0xf0
  [ 7.277204]  [<00000000002d0bba>] perf_event_alloc+0x6fa/0xce0
  [ 7.277214]  [<00000000002dc4a8>] __s390x_sys_perf_event_open+0x398/0xd50
  [ 7.277224]  [<0000000000b9e8f0>] system_call+0xdc/0x2d8
  [ 7.277233] 2 locks held by cf-csdiag/1892:
  [ 7.277241]  #0: 00000000976f5510 (&sig->cred_guard_mutex){+.+.},
                  at: __s390x_sys_perf_event_open+0xd2e/0xd50
  [ 7.277257]  #1: 00000000363b11bd (&pmus_srcu){....},
                  at: perf_event_alloc+0x52e/0xce0

The variable is now accessed in proper context. Use
get_cpu_var()/put_cpu_var() pair to disable
preemption during access.
As the hardware authorization settings apply to all CPUs, it
does not matter which CPU is used to check the authorization setting.

Remove the event->count assignment. It is not needed as function
perf_event_alloc() allocates memory for the event with kzalloc() and
thus count is already set to zero.

Fixes: fe5908bc ("s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Pull networking fixes from David Miller:
 "Fixes here and there, a couple new device IDs, as usual:

   1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.

   2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.

   3) Fix documentation for some eBPF helpers, from Quentin Monnet.

   4) Some UAPI bpf header sync with tools, also from Quentin Monnet.

   5) Set descriptor ownership bit at the right time for jumbo frames in
      stmmac driver, from Aaro Koskinen.

   6) Set IFF_UP properly in tun driver, from Eric Dumazet.

   7) Fix load/store doubleword instruction generation in powerpc eBPF
      JIT, from Naveen N. Rao.

   8) nla_nest_start() return value checks all over, from Kangjie Lu.

   9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
      merge window. From Marcelo Ricardo Leitner and Xin Long.

  10) Fix memory corruption with large MTUs in stmmac, from Aaro
      Koskinen.

  11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
      Dumazet.

  12) Fix topology subscription cancellation in tipc, from Erik Hugne.

  13) Memory leak in genetlink error path, from Yue Haibing.

  14) Valid control actions properly in packet scheduler, from Davide
      Caratti.

  15) Even if we get EEXIST, we still need to rehash if a shrink was
      delayed. From Herbert Xu.

  16) Fix interrupt mask handling in interrupt handler of r8169, from
      Heiner Kallweit.

  17) Fix leak in ehea driver, from Wen Yang"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
  dpaa2-eth: fix race condition with bql frame accounting
  chelsio: use BUG() instead of BUG_ON(1)
  net: devlink: skip info_get op call if it is not defined in dumpit
  net: phy: bcm54xx: Encode link speed and activity into LEDs
  tipc: change to check tipc_own_id to return in tipc_net_stop
  net: usb: aqc111: Extend HWID table by QNAP device
  net: sched: Kconfig: update reference link for PIE
  net: dsa: qca8k: extend slave-bus implementations
  net: dsa: qca8k: remove leftover phy accessors
  dt-bindings: net: dsa: qca8k: support internal mdio-bus
  dt-bindings: net: dsa: qca8k: fix example
  net: phy: don't clear BMCR in genphy_soft_reset
  bpf, libbpf: clarify bump in libbpf version info
  bpf, libbpf: fix version info and add it to shared object
  rxrpc: avoid clang -Wuninitialized warning
  tipc: tipc clang warning
  net: sched: fix cleanup NULL pointer exception in act_mirr
  r8169: fix cable re-plugging issue
  net: ethernet: ti: fix possible object reference leak
  net: ibm: fix possible object reference leak
  ...

free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

The live_context() function returns error pointers.  It never returns
NULL.

Fixes: 9c1477e8 ("drm/i915/selftests: Exercise adding requests to a full GGTT")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326050843.GA20038@kadam
(cherry picked from commit 602cbe8e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

  Stable fixes:
   - Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
   - fix mount/umount race in nlmclnt.
   - NFSv4.1 don't free interrupted slot on open

  Bugfixes:
   - Don't let RPC_SOFTCONN tasks time out if the transport is connected
   - Fix a typo in nfs_init_timeout_values()
   - Fix layoutstats handling during read failovers
   - fix uninitialized variable warning"

* tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: fix uninitialized variable warning
  pNFS/flexfiles: Fix layoutstats handling during read failovers
  NFS: Fix a typo in nfs_init_timeout_values()
  SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected
  NFSv4.1 don't free interrupted slot on open
  NFS: fix mount/umount race in nlmclnt.
  NFS: Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()

Avoid following compiler warning on uninitialized variable

net/sunrpc/xprtsock.c: In function ‘xs_read_stream_request.constprop’:
net/sunrpc/xprtsock.c:525:10: warning: ‘read’ may be used uninitialized in this function [-Wmaybe-uninitialized]
   return read;
          ^~~~
net/sunrpc/xprtsock.c:529:23: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  return ret < 0 ? ret : read;
         ~~~~~~~~~~~~~~^~~~~~
Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

It might happen that Tx conf acknowledges a frame before it was
subscribed in bql, as subscribing was previously done after the enqueue
operation.

This patch moves the netdev_tx_sent_queue call before the actual frame
enqueue, so that this can never happen.

Fixes: 569dac6a ("dpaa2-eth: bql support")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

clang warns about possible bugs in a dead code branch after
BUG_ON(1) when CONFIG_PROFILE_ALL_BRANCHES is enabled:

 drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: error: variable 'buf_size' is used uninitialized whenever 'if'
      condition is false [-Werror,-Wsometimes-uninitialized]
                BUG_ON(1);
                ^~~~~~~~~
 include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON'
 #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
                                   ^~~~~~~~~~~~~~~~~~~
 include/linux/compiler.h:48:23: note: expanded from macro 'unlikely'
 #  define unlikely(x)   (__branch_check__(x, 0, __builtin_constant_p(x)))
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 drivers/net/ethernet/chelsio/cxgb4/sge.c:482:9: note: uninitialized use occurs here
        return buf_size;
               ^~~~~~~~
 drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: note: remove the 'if' if its condition is always true
                BUG_ON(1);
                ^
 include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON'
 #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
                               ^
 drivers/net/ethernet/chelsio/cxgb4/sge.c:459:14: note: initialize the variable 'buf_size' to silence this warning
        int buf_size;
                    ^
                     = 0

Use BUG() here to create simpler code that clang understands
correctly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In dumpit, unlike doit, the check for info_get op being defined
is missing. Add it and avoid null pointer dereference in case driver
does not define this op.

Fixes: f9cf2288 ("devlink: add device information API")
Reported-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously the green and amber LEDs on this quad PHY were solid, to
indicate an encoding of the link speed (10/100/1000).

This keeps the LEDs always on just as before, but now they flash on
Rx/Tx activity.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When running a syz script, a panic occurred:

[  156.088228] BUG: KASAN: use-after-free in tipc_disc_timeout+0x9c9/0xb20 [tipc]
[  156.094315] Call Trace:
[  156.094844]  <IRQ>
[  156.095306]  dump_stack+0x7c/0xc0
[  156.097346]  print_address_description+0x65/0x22e
[  156.100445]  kasan_report.cold.3+0x37/0x7a
[  156.102402]  tipc_disc_timeout+0x9c9/0xb20 [tipc]
[  156.106517]  call_timer_fn+0x19a/0x610
[  156.112749]  run_timer_softirq+0xb51/0x1090

It was caused by the netns freed without deleting the discoverer timer,
while later on the netns would be accessed in the timer handler.

The timer should have been deleted by tipc_net_stop() when cleaning up a
netns. However, tipc has been able to enable a bearer and start d->timer
without the local node_addr set since Commit 52dfae5c ("tipc: obtain
node identity from interface by default"), which caused the timer not to
be deleted in tipc_net_stop() then.

So fix it in tipc_net_stop() by changing to check local node_id instead
of local node_addr, as Jon suggested.

While at it, remove the calling of tipc_nametbl_withdraw() there, since
tipc_nametbl_stop() will take of the nametbl's freeing after.

Fixes: 52dfae5c ("tipc: obtain node identity from interface by default")
Reported-by: syzbot+a25307ad099309f1c2b9@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

New device of QNAP based on aqc111u
Add this ID to blacklist of cdc_ether driver as well
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RFC 8033 replaces the IETF draft for PIE
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch implements accessors for the QCA8337 MDIO access
through the MDIO_MASTER register, which makes it possible to
access the PHYs on slave-bus through the switch. In cases
where the switch ports are already mapped via external
"phy-phandles", the internal mdio-bus is disabled in order to
prevent a duplicated discovery and enumeration of the same
PHYs. Don't use mixed external and internal mdio-bus
configurations, as this is not supported by the hardware.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This belated patch implements Andrew Lunn's request of
"remove the phy_read() and phy_write() functions."
<https://lore.kernel.org/patchwork/comment/902734/>

While seemingly harmless, this causes the switch's user
port PHYs to get registered twice. This is because the
DSA subsystem will create a slave mdio-bus not knowing
that the qca8k_phy_(read|write) accessors operate on
the external mdio-bus. So the same "bus" gets effectively
duplicated.

Cc: stable@vger.kernel.org
Fixes: 6b93fb46 ("net-next: dsa: add new driver for qca8xxx family")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch updates the qca8k's binding to document to the
approach for using the internal mdio-bus of the supported
qca8k switches.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the example, the phy at phy@0 is clashing with
the switch0@0 at the same address. Usually, the switches
are accessible through pseudo PHYs which in case of the
qca8k are located at 0x10 - 0x18.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull btrfs fixes from David Sterba:

 - fsync fixes: i_size for truncate vs fsync, dio vs buffered during
   snapshotting, remove complicated but incomplete assertion

 - removed excessive warnigs, misreported device stats updates

 - fix raid56 page mapping for 32bit arch

 - fixes reported by static analyzer

* tag 'for-5.1-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix assertion failure on fsync with NO_HOLES enabled
  btrfs: Avoid possible qgroup_rsv_size overflow in btrfs_calculate_inode_block_rsv_size
  btrfs: Fix bound checking in qgroup_trace_new_subtree_blocks
  btrfs: raid56: properly unmap parity page in finish_parity_scrub()
  btrfs: don't report readahead errors and don't update statistics
  Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes
  btrfs: remove WARN_ON in log_dir_items
  Btrfs: fix incorrect file size after shrinking truncate and fsync

Pull tracing fixes from Steven Rostedt:
 "Three small fixes:

   - A fix to a double free in the histogram code

   - Uninitialized variable fix

   - Use NULL instead of zero fix and spelling fixes"

* tag 'trace-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix warning using plain integer as NULL & spelling corrections
  tracing: initialize variable in create_dyn_event()
  tracing: Remove unnecessary var_ref destroy in track_data_destroy()

Pull file locking bugfix from Jeff Layton:
 "Just a single fix for a bug that crept into POSIX lock deadlock
  detection in v5.0"

* tag 'locks-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  locks: wake any locks blocked on request before deadlock check

XFS applies more strict serialization constraints to unaligned
direct writes to accommodate things like direct I/O layer zeroing,
unwritten extent conversion, etc. Unaligned submissions acquire the
exclusive iolock and wait for in-flight dio to complete to ensure
multiple submissions do not race on the same block and cause data
corruption.

This generally works in the case of an aligned dio followed by an
unaligned dio, but the serialization is lost if I/Os occur in the
opposite order. If an unaligned write is submitted first and
immediately followed by an overlapping, aligned write, the latter
submits without the typical unaligned serialization barriers because
there is no indication of an unaligned dio still in-flight. This can
lead to unpredictable results.

To provide proper unaligned dio serialization, require that such
direct writes are always the only dio allowed in-flight at one time
for a particular inode. We already acquire the exclusive iolock and
drain pending dio before submitting the unaligned dio. Wait once
more after the dio submission to hold the iolock across the I/O and
prevent further submissions until the unaligned I/O completes. This
is heavy handed, but consistent with the current pre-submission
serialization for unaligned direct writes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

Changed  0 --> NULL to avoid sparse warning
Corrected spelling mistakes reported by checkpatch.pl
Sparse warning below:

sudo make C=2 CF=-D__CHECK_ENDIAN__ M=kernel/trace

CHECK   kernel/trace/ftrace.c
kernel/trace/ftrace.c:3007:24: warning: Using plain integer as NULL pointer
kernel/trace/ftrace.c:4758:37: warning: Using plain integer as NULL pointer

Link: http://lkml.kernel.org/r/20190323183523.GA2244@hari-Inspiron-1545Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>