• Sven Sandberg's avatar
    BUG#37718: rpl.rpl_stm_mystery22 fails sporadically on pushbuild · cfeae526
    Sven Sandberg authored
    Problem 1: The test waits for an error in the slave sql thread,
    then resolves the error and issues 'start slave'. However, there
    is a gap between when the error is reported and the slave sql
    thread stops. If this gap was long, the slave would still be
    running when 'start slave' happened, so 'start slave' would fail
    and cause a test failure.
    Fix 1: Made wait_for_slave_sql_error wait for the slave to stop
    instead of wait for error in the IO thread. After stopping, the
    error code is verified. If the error code is wrong, debug info
    is printed. To print debug info, the debug printing code in
    wait_for_slave_param.inc was moved out to a new file,
    show_rpl_debug_info.inc.
    Problem 2: rpl_stm_mystery22 is a horrible name, the comments in
    the file didn't explain anything useful, the test was generally
    hard to follow, and the test was essentially duplicated between
    rpl_stm_mystery22 and rpl_row_mystery22.
    Fix 2: The test is about conflicts in the slave SQL thread,
    hence I renamed the tests to rpl_{stm,row}_conflicts. Refactored
    the test so that the work is done in
    extra/rpl_tests/rpl_conflicts.inc, and
    rpl.rpl_{row,stm}_conflicts merely sets some variables and then
    sourced extra/rpl_tests/rpl_conflicts.inc.
    The tests have been rewritten and comments added.
    Problem 3: When calling wait_for_slave_sql_error.inc, you always
    want to verify that the sql thread stops because of the expected
    error and not because of some other error. Currently,
    wait_for_slave_sql_error.inc allows the caller to omit the error
    code, in which case all error codes are accepted.
    Fix 3: Made wait_for_slave_sql_error.inc fail if no error code
    is given. Updated rpl_filter_tables_not_exist accordingly.
    Problem 4: rpl_filter_tables_not_exist had a typo, the dollar
    sign was missing in a 'let' statement.
    Fix 4: Added dollar sign.
    Problem 5: When replicating from other servers than the one named
    'master', the wait_for_slave_* macros were unable to print debug
    info on the master.
    Fix 5: Replace parameter $slave_keep_connection by
    $master_connection.
    
    
    mysql-test/extra/rpl_tests/rpl_conflicts.test:
      rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
      The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
      just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
      Also, cleaned up the test case a bit, and fixed BUG#37718.
    mysql-test/include/show_rpl_debug_info.inc:
      Factored out the debug printing code from wait_for_slave_param.inc to
      a new file, show_rpl_debug_info.inc.
      Also removed the $slave_keep_connection parameter, and replaced it by
      $master_connection. This allows printing debug info on the master, no
      matter what the name of the master connection is.
    mysql-test/include/start_slave.inc:
      Replaced $slave_keep_connection by $master_connection.
    mysql-test/include/stop_slave.inc:
      Replaced $slave_keep_connection by $master_connection.
    mysql-test/include/sync_slave_io_with_master.inc:
      Replaced $slave_keep_connection by $master_connection.
    mysql-test/include/wait_for_slave_io_to_start.inc:
      Replaced $slave_keep_connection by $master_connection.
    mysql-test/include/wait_for_slave_io_to_stop.inc:
      Replaced $slave_keep_connection by $master_connection.
    mysql-test/include/wait_for_slave_param.inc:
      Factored out the debug printing code from wait_for_slave_param.inc to
      a new file, show_rpl_debug_info.inc.
      Also removed the $slave_keep_connection parameter, and replaced it by
      $master_connection. This allows printing debug info on the master, no
      matter what the name of the master connection is.
      Had to move the printing of debug info out of the while loop because
      of BUG number 41913.
    mysql-test/include/wait_for_slave_sql_error.inc:
      Made it wait until the slave sql thread has stopped. This
      takes very short time and avoids race condition bugs in
      test cases (e.g., fixes BUG#37718).
      Replaced $slave_keep_connection by $master_connection.
    mysql-test/include/wait_for_slave_sql_error_and_skip.inc:
      Since wait_for_slave_sql_error now waits for the slave sql
      thread to stop too, wait_for_slave_sql_error_and_skip does not
      have to wait for the slave sql thread to stop.
      Also, since wait_for_slave_sql_error now requires the parameter
      $slave_sql_errno to be set, wait_for_slave_sql_error_and_skip
      requires that as well: updated the usage instructions.
    mysql-test/include/wait_for_slave_sql_to_start.inc:
      Replaced $slave_keep_connection by $master_connection.
    mysql-test/include/wait_for_slave_sql_to_stop.inc:
      Replaced $slave_keep_connection by $master_connection.
    mysql-test/include/wait_for_slave_to_start.inc:
      Replaced $slave_keep_connection by $master_connection.
    mysql-test/include/wait_for_slave_to_stop.inc:
      Replaced $slave_keep_connection by $master_connection.
    mysql-test/suite/rpl/r/rpl_row_conflicts.result:
      update result file
    mysql-test/suite/rpl/r/rpl_stm_conflicts.result:
      update result file
    mysql-test/suite/rpl/t/rpl_dual_pos_advance.test:
      Replaced $slave_keep_connection by $master_connection.
    mysql-test/suite/rpl/t/rpl_filter_tables_not_exist.test:
      Set $slave_sql_errno, since it is now required.
      Add dollar sign to $show_sql_error (without dollar sign,
      mtr makes it an environment variable).
    mysql-test/suite/rpl/t/rpl_row_conflicts.test:
      rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
      The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
      just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
      Also, cleaned up the test case a bit, and fixed BUG#37718.
    mysql-test/suite/rpl/t/rpl_row_mystery22.test:
      rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
      The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
      just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
      Also, cleaned up the test case a bit, and fixed BUG#37718.
    mysql-test/suite/rpl/t/rpl_stm_conflicts.test:
      rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
      The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
      just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
      Also, cleaned up the test case a bit, and fixed BUG#37718.
    cfeae526
rpl_row_conflicts.test 900 Bytes