Bug#45377: ARCHIVE tables aren't discoverable after OPTIMIZE

The problem was that the optimize method of the ARCHIVE storage
engine was not preserving the FRM embedded in the ARZ file when
rewriting the ARZ file for optimization. The ARCHIVE engine stores
the FRM in the ARZ file so it can be transferred from machine to
machine without also copying the FRM -- the engine restores the
embedded FRM during discovery.

The solution is to copy over the FRM when rewriting the ARZ file.
In addition, some initial error checking is performed to ensure
garbage is not copied over.


mysql-test/t/archive.test:
  Add test case for Bug#45377.
storage/archive/azio.c:
  Add error checking to ensure that the I/O operations are
  successful.
storage/archive/ha_archive.cc:
  Copy over the embedded FRM.

mysql-test/r/archive.result

@@ -12775,3 +12775,29 @@ a
 1
 2
 DROP TABLE t1;
+#
+# Bug#45377: ARCHIVE tables aren't discoverable after OPTIMIZE
+#
+DROP TABLE IF EXISTS t1;
+CREATE TABLE t1 (a int) ENGINE=ARCHIVE;
+SHOW CREATE TABLE t1;
+Table	Create Table
+t1	CREATE TABLE `t1` (
+  `a` int(11) DEFAULT NULL
+) ENGINE=ARCHIVE DEFAULT CHARSET=latin1
+INSERT INTO t1 VALUES (1);
+OPTIMIZE TABLE t1;
+Table	Op	Msg_type	Msg_text
+test.t1	optimize	status	OK
+FLUSH TABLES;
+INSERT INTO t1 VALUES (2);
+SELECT * FROM t1 ORDER BY a;
+a
+1
+2
+SHOW CREATE TABLE t1;
+Table	Create Table
+t1	CREATE TABLE `t1` (
+  `a` int(11) DEFAULT NULL
+) ENGINE=ARCHIVE DEFAULT CHARSET=latin1
+DROP TABLE t1;

mysql-test/t/archive.test

@@ -1701,3 +1701,24 @@ SELECT * FROM t1;
 REPAIR TABLE t1 EXTENDED;
 SELECT * FROM t1;
 DROP TABLE t1;
+
+
+--echo #
+--echo # Bug#45377: ARCHIVE tables aren't discoverable after OPTIMIZE
+--echo #
+
+--disable_warnings
+DROP TABLE IF EXISTS t1;
+--enable_warnings
+
+CREATE TABLE t1 (a int) ENGINE=ARCHIVE;
+SHOW CREATE TABLE t1;
+INSERT INTO t1 VALUES (1);
+OPTIMIZE TABLE t1;
+let $MYSQLD_DATADIR= `select @@datadir`;
+remove_file $MYSQLD_DATADIR/test/t1.frm;
+FLUSH TABLES;
+INSERT INTO t1 VALUES (2);
+SELECT * FROM t1 ORDER BY a;
+SHOW CREATE TABLE t1;
+DROP TABLE t1;

storage/archive/azio.c

@@ -31,7 +31,7 @@ int az_open(azio_stream *s, const char *path, int Flags, File  fd);
 int do_flush(azio_stream *file, int flush);
 int    get_byte(azio_stream *s);
 void   check_header(azio_stream *s);
-void write_header(azio_stream *s);
+int write_header(azio_stream *s);
 int    destroy(azio_stream *s);
 void putLong(File file, uLong x);
 uLong  getLong(azio_stream *s);
@@ -155,7 +155,7 @@ int az_open (azio_stream *s, const char *path, int Flags, File fd)
 }
 
 
-void write_header(azio_stream *s)
+int write_header(azio_stream *s)
 {
   char buffer[AZHEADER_SIZE + AZMETA_BUFFER_SIZE];
   char *ptr= buffer;
@@ -191,8 +191,8 @@ void write_header(azio_stream *s)
   *(ptr + AZ_DIRTY_POS)= (unsigned char)s->dirty; /* Start of Data Block Index Block */
 
   /* Always begin at the begining, and end there as well */
-  my_pwrite(s->file, (uchar*) buffer, AZHEADER_SIZE + AZMETA_BUFFER_SIZE, 0,
-            MYF(0));
+  return my_pwrite(s->file, (uchar*) buffer, AZHEADER_SIZE + AZMETA_BUFFER_SIZE,
+                   0, MYF(MY_NABP)) ? 1 : 0;
 }
 
 /* ===========================================================================
@@ -838,19 +838,19 @@ int azwrite_frm(azio_stream *s, char *blob, unsigned int length)
   s->frm_length= length;
   s->start+= length;
 
-  my_pwrite(s->file, (uchar*) blob, s->frm_length, s->frm_start_pos, MYF(0));
-
-  write_header(s);
-  my_seek(s->file, 0, MY_SEEK_END, MYF(0));
+  if (my_pwrite(s->file, (uchar*) blob, s->frm_length,
+                s->frm_start_pos, MYF(MY_NABP)) ||
+      write_header(s) ||
+      (my_seek(s->file, 0, MY_SEEK_END, MYF(0)) == MY_FILEPOS_ERROR))
+    return 1;
 
   return 0;
 }
 
 int azread_frm(azio_stream *s, char *blob)
 {
-  my_pread(s->file, (uchar*) blob, s->frm_length, s->frm_start_pos, MYF(0));
-
-  return 0;
+  return my_pread(s->file, (uchar*) blob, s->frm_length,
+                  s->frm_start_pos, MYF(MY_NABP)) ? 1 : 0;
 }
 
 

storage/archive/ha_archive.cc

@@ -613,6 +613,34 @@ int ha_archive::close(void)
 }
 
 
+/**
+  Copy a frm blob between streams.
+
+  @param  src   The source stream.
+  @param  dst   The destination stream.
+
+  @return Zero on success, non-zero otherwise.
+*/
+
+int ha_archive::frm_copy(azio_stream *src, azio_stream *dst)
+{
+  int rc= 0;
+  char *frm_ptr;
+
+  if (!(frm_ptr= (char *) my_malloc(src->frm_length, MYF(0))))
+    return HA_ERR_OUT_OF_MEM;
+
+  /* Write file offset is set to the end of the file. */
+  if (azread_frm(src, frm_ptr) ||
+      azwrite_frm(dst, frm_ptr, src->frm_length))
+    rc= my_errno ? my_errno : HA_ERR_INTERNAL_ERROR;
+
+  my_free(frm_ptr);
+
+  return rc;
+}
+
+
 /*
   We create our data file here. The format is pretty simple. 
   You can read about the format of the data file above.
@@ -1345,10 +1373,10 @@ int ha_archive::repair(THD* thd, HA_CHECK_OPT* check_opt)
 */
 int ha_archive::optimize(THD* thd, HA_CHECK_OPT* check_opt)
 {
-  DBUG_ENTER("ha_archive::optimize");
   int rc= 0;
   azio_stream writer;
   char writer_filename[FN_REFLEN];
+  DBUG_ENTER("ha_archive::optimize");
 
   init_archive_reader();
 
@@ -1366,6 +1394,13 @@ int ha_archive::optimize(THD* thd, HA_CHECK_OPT* check_opt)
   if (!(azopen(&writer, writer_filename, O_CREAT|O_RDWR|O_BINARY)))
     DBUG_RETURN(HA_ERR_CRASHED_ON_USAGE); 
 
+  /*
+    Transfer the embedded FRM so that the file can be discoverable.
+    Write file offset is set to the end of the file.
+  */
+  if ((rc= frm_copy(&archive, &writer)))
+    goto error;
+
   /* 
     An extended rebuild is a lot more effort. We open up each row and re-record it. 
     Any dead rows are removed (aka rows that may have been partially recorded). 

storage/archive/ha_archive.h

@@ -75,6 +75,7 @@ class ha_archive: public handler
 
   archive_record_buffer *create_record_buffer(unsigned int length);
   void destroy_record_buffer(archive_record_buffer *r);
+  int frm_copy(azio_stream *src, azio_stream *dst);
 
 public:
   ha_archive(handlerton *hton, TABLE_SHARE *table_arg);