BUG#21842 (Cluster fails to replicate to innodb or myisam with err 134

using TPC-B):
 
Problem: A RBR event can contain incomplete row data (only key value and
fields which have been changed). In that case, when the row is unpacked
into record and written to a table, the missing fields get incorrect NULL
values leading to master-slave inconsistency.
 
Solution: Use values found in slave's table for columns which are not given
in the rows event. The code for writing a single row uses the following 
algorithm: 

1. unpack row_data into table->record[0],
2. try to insert record,
3. if duplicate record found, fetch it into table->record[0],
4. unpack row_data into table->record[0],
5. write table->record[0] into the table.

Where row_data is the row as stored in the data area of a rows event. 
Thus:

a) unpacking of row_data happens at the time when row is written into 
 a table,

b) when unpacking (in step 4), only columns present in row_data are 
 overwritten - all other columns remain as they were found in the table.
 
Since all data needed for the above algorithm is stored inside 
Rows_log_event class, functions which locate and write rows are turned 
into methods of that class.

replace_record()     -> Rows_log_event::write_row()
find_and_fetch_row() -> Rows_log_event::find_row()

Both methods take row data from event's data buffer - the row being 
processed is pointed by m_curr_row. They unpack the data as needed into 
table's record buffers record[0] or record[1]. When row is unpacked, 
m_curr_row_end is set to point at next row in the data buffer.

Other changes introduced in this changeset:

- Change signature of unpack_row(): don't report errors and don't
setup table's rw_set here. Errors can happen only when setting default 
values in prepare_record() function and are detected there.
 
- In Rows_log_event and derived classes, don't pass arguments to
the execution primitives (do_...() member functions) but use class
members instead.

- Move old row handling code into log_event_old.cc to be used by 
*_rows_log_event_old classes.

Also, a new test rpl_ndb_2other is added which tests basic replication 
from master using ndb tables to slave storing the same tables using 
(possibly) different engine (myisam,innodb).
  
Test is based on existing tests rpl_ndb_2myisam and rpl_ndb_2innodb. 
However, these tests doesn't work for various reasons and currently are 
disabled (see BUG#19227).
  
The new test differs from the ones it is based on as follows:
  
1. Single test tests replication with different storage engines on slave 
(myisam, innodb, ndb).
  
2. Include file extra/rpl_tests/rpl_ndb_2multi_eng.test containing 
original tests is replaced by extra/rpl_tests/rpl_ndb_2multi_basic.test 
which doesn't contain tests using partitioned tables as these don't work 
currently. Instead, it tests replication to a slave which has more or 
less columns than master.
  
3. Include file include/rpl_multi_engine3.inc is replaced with 
include/rpl_multi_engine2.inc. The later differs by performing slightly 
different operations (updating more than one row in the table) and 
clearing table with "TRUNCATE TABLE" statement instead of "DELETE FROM" 
as replication of "DELETE" doesn't work well in this setting.
  
4. Slave must use option --log-slave-updates=0 as otherwise execution of 
replication events generated by ndb fails if table uses a different 
storage engine on slave (see BUG#29569).


sql/log_event.cc:
  - Initialization of new Rows_log_event members.
  - Fixing some typos in documentation.
  
  In Rows_log_event::do_apply_event:
  - Set COMPLETE_ROWS_F flag (when master and slave have the same number of 
  columns and all colums are present in the row)
  - Move initialization of tables write/read sets here, outside the rows
  processing loop (and out of unpack_row() function).
  - Remove calls to do_prepare_row() - no longer needed.
  - Add code managing m_curr_row and m_curr_row_end pointers.
  
  - Change signatures of row processing methods of Rows_log_event and it
  descendants - now most arguments are taken from class members.
  - Remove do_prepare_row() methods which are no longer used.
  - The auto_afree_ptr template is moved to rpl_utility.h (so that it can
  be used in log_event_old.cc).
  - Removed copy_extra_fields() function - no longer used.
  
  In Rows_log_event::write_row (former replace_record):
  - The old code is moved to log_event_old.cc.
  - Use prepare_record() and non-destructive unpack_current_row() to fill record
  with data.
  - In case a record being inserted already exists on slave and row data is 
  incomplete use the record found and non-destructive unpack_current_row() to 
  combine new column values with existing ones.
  - More debug info added.
  
  In Rows_log_event::find_row (former find_and_fetch_row function):
  - The old code is moved to log_event_old.cc.
  - Unpacking of the row is moved here.
  - In case of search using PK, the key data is prepared here.
  - More debug info added.
  
  - Remove initialization of Rows_log_event::m_after_image buffer which is no
  longer used. 
  - Use new row unpacking methods in Update_rows_log_event::do_exec_row() to 
  create before and after image.
  
  Note: all existing code used by Rows_log_event::do_apply_event() has been moved
  to log_event_old.cc to be used by *_rows_log_event_old classes.
sql/log_event.h:
  - Add new COMPLETE_ROWS_F flag in Rows_log_event.
  - Add Rows_log_event members describing the row being processed.
  - Add a pointer to key buffer which is used in derived classes.
  - Add new methods: find__row(), write_row() and unpack_current_row().
  - Change signatures of do_...() methods (replace method arguments by
  class members).
  - Remove do_prepare_row() method which is no longer used.
  - Update method documentation.
  - Add Old_rows_log_event class, which contains the old row processing code, as
  a friend of Rows_log_event so that it can access all members of an event 
  instance.
sql/log_event_old.cc:
  Move here old implementation of Rows_log_event::do_apply_event() and 
  helper methods.
sql/log_event_old.h:
  - Define new class Old_rows_log_event encapsulating old version of
  Rows_log_event::do_apply_event() and the helper methods.
  - Add the Old_rows_log_event class as a base for *_old versions of RBR event
  classes, ensure that the old version of do_apply_event() is called.
  - For *_old classes, declare the helper methods used in the old version of
  do_apply_event().
sql/rpl_record.cc:
  - Make unpack_row non-destructive for columns not present in the row.
  - Don't fill read/write set here as it is done outside these functions.
  - Move initialization of a record with default values to a separate
  function prepare_record().
sql/rpl_record.h:
  - Change signature of unpack_row().
  - Declare function prepare_record().
sql/rpl_utility.cc:
  Make tabe_def::calc_field_size() a const method.
sql/rpl_utility.h:
  Make table_def::calc_field_size() a const method.
  
  Move auto_afree_ptr template here so that it can be re-used (currently
  in log_event.cc and log_event_old.cc). Similar with DBUG_PRINT_BITSET 
  macro.
mysql-test/extra/rpl_tests/rpl_ndb_2multi_basic.test:
  Modification of rpl_ndb_2multi_eng test. Tests with partitioned tables 
  are removed and a setup with slave having different number of columns 
  than master is added.
mysql-test/include/rpl_multi_engine2.inc:
  Modification of rpl_multi_engine3.inc which operates on more rows and
  replaces "DELETE FROM t1" with "TRUNCATE TABLE t1" as the first form
  doesn't replicate in NDB -> non-NDB setting (BUG#28538).
mysql-test/suite/rpl_ndb/r/rpl_ndb_2other.result:
  Results of the test.
mysql-test/suite/rpl_ndb/t/rpl_ndb_2other-slave.opt:
  Test options. --log-slave-updates=0 is compulsory as otherwise non-NDB 
  slave applying row events from NDB master will fail when trying to log
  them.
mysql-test/suite/rpl_ndb/t/rpl_ndb_2other.test:
  Test replication of NDB table to slave using other engine. The main test
  is in extra/rpl_tests/rpl_ndb_2multi_basic.test. It is included here
  several times with different settings of default storage engine on slave.

mysql-test/extra/rpl_tests/rpl_ndb_2multi_basic.test

+#######################################
+# Author: Rafal Somla                 #
+# Date: 2006-08-20                    #
+# Purpose: Test replication of basic  #
+# table operations in various setups  #   
+#                                     #
+# Based on rpl_ndb_2multi_eng.test by #
+# JBM                                 #
+#######################################
+
+--echo --- Doing pre test cleanup --- 
+
+connection master;
+--disable_warnings
+DROP TABLE IF EXISTS t1;
+--enable_query_log
+
+#################################################
+--echo --- Create Table Section ---
+
+CREATE TABLE t1 (id MEDIUMINT NOT NULL, 
+                 b1 INT, 
+                 vc VARCHAR(255), 
+                 bc CHAR(255), 
+                 d DECIMAL(10,4) DEFAULT 0, 
+                 f FLOAT DEFAULT 0, 
+                 total BIGINT UNSIGNED, 
+                 y YEAR, 
+                 t DATE, 
+                 PRIMARY KEY(id));
+
+--echo --- Show table on master ---
+
+SHOW CREATE TABLE t1;
+
+--echo --- Show table on slave ---
+
+sync_slave_with_master;
+SHOW CREATE TABLE t1;
+
+--source include/rpl_multi_engine2.inc
+
+#################################################
+# Okay lets see how it holds up to table changes
+--echo --- Check that simple Alter statements are replicated correctly --
+
+ALTER TABLE t1 DROP PRIMARY KEY;
+# note: table with no PK can't contain blobs if it is to be replicated.
+ALTER TABLE t1 MODIFY vc char(32);  
+
+--echo --- Show the new improved table on the master ---
+
+SHOW CREATE TABLE t1;
+
+--echo --- Make sure that our tables on slave are still same engine ---
+--echo --- and that the alter statements replicated correctly ---
+
+sync_slave_with_master;
+SHOW CREATE TABLE t1;
+
+--source include/rpl_multi_engine2.inc
+
+#################################################
+--echo --- Check that replication works when slave has more columns than master
+connection master;
+ALTER TABLE t1 ADD PRIMARY KEY(id,total);
+ALTER TABLE t1 MODIFY vc TEXT;
+
+INSERT INTO t1 VALUES(3,1,'Testing MySQL databases is a cool ',
+                      'Must make it bug free for the customer',
+                       654321.4321,15.21,0,1965,"1905-11-14");
+INSERT INTO t1 VALUES(20,1,'Testing MySQL databases is a cool ',
+                      'Must make it bug free for the customer',
+                       654321.4321,15.21,0,1965,"1965-11-14");
+INSERT INTO t1 VALUES(50,1,'Testing MySQL databases is a cool ',
+                      'Must make it bug free for the customer',
+                       654321.4321,15.21,0,1965,"1985-11-14");
+
+--echo --- Add columns on slave ---
+--sync_slave_with_master
+ALTER TABLE t1 ADD (u int, v char(16) default 'default');
+UPDATE t1 SET u=7 WHERE id < 50;
+UPDATE t1 SET v='explicit' WHERE id >10;
+
+--echo --- Show changed table on slave ---
+
+SHOW CREATE TABLE t1;
+SELECT * 
+FROM t1
+ORDER BY id;
+
+--source include/rpl_multi_engine2.inc
+TRUNCATE TABLE t1;
+
+#################################################
+--echo --- Check that replication works when master has more columns than slave
+connection master;
+
+--echo --- Remove columns on slave ---
+--sync_slave_with_master
+ALTER TABLE t1 DROP COLUMN v;
+ALTER TABLE t1 DROP COLUMN u;
+ALTER TABLE t1 DROP COLUMN t;
+ALTER TABLE t1 DROP COLUMN y;
+
+--echo --- Show changed table on slave ---
+
+SHOW CREATE TABLE t1;
+
+--source include/rpl_multi_engine2.inc
+TRUNCATE TABLE t1;
+
+#################################################
+--echo --- Do Cleanup --
+connection master;
+DROP TABLE IF EXISTS t1;
+
+sync_slave_with_master;
+connection master;

mysql-test/include/rpl_multi_engine2.inc

+#############################################################
+# Author: Rafal
+# Date: 2007-08-20
+# based on rpl_multi_engine3.inc
+#############################################################
+
+connection slave;
+STOP SLAVE;
+RESET SLAVE;
+
+connection master;
+RESET MASTER;
+
+connection slave;
+START SLAVE;
+
+--echo --- Populate t1 with data ---
+connection master;
+--disable_query_log
+INSERT INTO t1 VALUES(42,1,'Testing MySQL databases is a cool ',
+                      'Must make it bug free for the customer',
+                       654321.4321,15.21,0,1965,"1905-11-14");
+INSERT INTO t1 VALUES(2,1,'Testing MySQL databases is a cool ',
+                      'Must make it bug free for the customer',
+                       654321.4321,15.21,0,1965,"1965-11-14");
+INSERT INTO t1 VALUES(4,1,'Testing MySQL databases is a cool ',
+                      'Must make it bug free for the customer',
+                       654321.4321,15.21,0,1965,"1985-11-14");
+INSERT INTO t1 VALUES(142,1,'Testing MySQL databases is a cool ',
+                      'Must make it bug free for the customer',
+                       654321.4321,15.21,0,1965,"1995-11-14");
+INSERT INTO t1 VALUES(412,1,'Testing MySQL databases is a cool ',
+                      'Must make it bug free for the customer',
+                       654321.4321,15.21,0,1965,"2005-11-14");
+--enable_query_log
+
+--echo --- Select from t1 on master --- 
+select *
+from t1 
+order by id;
+
+sync_slave_with_master;
+--echo --- Select from t1 on slave ---
+select *
+from t1 
+order by id;
+
+--echo --- Perform basic operation on master ---
+--echo --- and ensure replicated correctly ---
+connection master;
+
+--echo --- Update t1 on master --
+UPDATE t1 SET b1 = 0, bc='updated', t="2006-02-22" 
+WHERE id < 100 
+ORDER BY id;
+
+--echo --- Check the update on master --- 
+SELECT *
+FROM t1 
+WHERE id < 100
+ORDER BY id;
+
+# Must give injector thread a little time to get update
+# into the binlog other wise we will miss the update.
+
+sync_slave_with_master;
+--echo --- Check Update on slave ---
+SELECT *
+FROM t1 
+WHERE id < 100
+ORDER BY id;
+
+connection master;
+--echo --- Remove a record from t1 on master ---
+# Note: there is an error in replication of Delete_row
+# from NDB to MyISAM (BUG#28538). However, if there is
+# only one row in Delete_row event then it works fine,
+# as this test demonstrates.
+DELETE FROM t1 WHERE id = 412;
+
+--echo --- Show current count on master for t1 ---
+SELECT COUNT(*) FROM t1;
+
+sync_slave_with_master;
+--echo --- Show current count on slave for t1 --- 
+SELECT COUNT(*) FROM t1;
+
+connection master;
+TRUNCATE TABLE t1;
+sync_slave_with_master;
+connection master;

mysql-test/suite/rpl_ndb/t/rpl_ndb_2other-slave.opt

+--innodb --log-slave-updates=0 

mysql-test/suite/rpl_ndb/t/rpl_ndb_2other.test

+#############################################################
+# Author: Rafal Somla
+# Date: 2006-08-20
+# Purpose: Trying to test ability to replicate from cluster
+# to other engines (innodb, myisam).
+##############################################################
+--source include/have_ndb.inc
+--source include/have_innodb.inc
+--source include/have_binlog_format_mixed_or_row.inc
+--source include/master-slave.inc
+
+# On master use NDB as storage engine.
+connection master;
+SET storage_engine=ndb;
+
+--echo
+--echo === NDB -> MYISAM ===
+--echo
+connection slave;
+SET storage_engine=myisam;
+--source extra/rpl_tests/rpl_ndb_2multi_basic.test
+
+--echo
+--echo === NDB -> INNODB ===
+--echo
+connection slave;
+SET storage_engine=innodb;
+--source extra/rpl_tests/rpl_ndb_2multi_basic.test
+
+--echo
+--echo === NDB -> NDB ===
+--echo
+connection slave;
+SET storage_engine=ndb;
+--source extra/rpl_tests/rpl_ndb_2multi_basic.test

sql/log_event.h

@@ -23,6 +23,10 @@
 
 #include <my_bitmap.h>
 #include "rpl_constants.h"
+#ifndef MYSQL_CLIENT
+#include "rpl_record.h"
+#include "rpl_reporting.h"
+#endif
 
 #define LOG_READ_EOF    -1
 #define LOG_READ_BOGUS  -2
@@ -2180,7 +2184,13 @@ class Rows_log_event : public Log_event
     NO_FOREIGN_KEY_CHECKS_F = (1U << 1),
 
     /* Value of the OPTION_RELAXED_UNIQUE_CHECKS flag in thd->options */
-    RELAXED_UNIQUE_CHECKS_F = (1U << 2)
+    RELAXED_UNIQUE_CHECKS_F = (1U << 2),
+
+    /** 
+      Indicates that rows in this event are complete, that is contain
+      values for all columns of the table.
+     */
+    COMPLETE_ROWS_F = (1U << 3)
   };
 
   typedef uint16 flag_set;
@@ -2284,7 +2294,26 @@ class Rows_log_event : public Log_event
   uchar    *m_rows_cur;		/* One-after the end of the data */
   uchar    *m_rows_end;		/* One-after the end of the allocated space */
 
+  const uchar *m_curr_row;     /* Start of the row being processed */
+  const uchar *m_curr_row_end; /* One-after the end of the current row */
+
   flag_set m_flags;		/* Flags for row-level events */
+  uchar    *m_key;      /* Buffer to keep key value during searches */
+
+  /* helper functions */
+
+#if !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION)
+  int find_row(const RELAY_LOG_INFO *const);
+  int write_row(const RELAY_LOG_INFO *const, const bool);
+
+  // Unpack the current row into m_table->record[0]
+  int unpack_current_row(const RELAY_LOG_INFO *const rli)
+  { 
+    DBUG_ASSERT(m_table);
+    return ::unpack_row(rli, m_table, m_width, m_curr_row, &m_cols, 
+                        &m_curr_row_end, &m_master_reclength);
+  }
+#endif
 
 private:
 
@@ -2309,7 +2338,8 @@ class Rows_log_event : public Log_event
       The member function will return 0 if all went OK, or a non-zero
       error code otherwise.
   */
-  virtual int do_before_row_operations(TABLE *table) = 0;
+  virtual 
+  int do_before_row_operations(const Slave_reporting_capability *const log) = 0;
 
   /*
     Primitive to clean up after a sequence of row executions.
@@ -2319,45 +2349,33 @@ class Rows_log_event : public Log_event
       After doing a sequence of do_prepare_row() and do_exec_row(),
       this member function should be called to clean up and release
       any allocated buffers.
+      
+      The error argument, if non-zero, indicates an error which happened during
+      row processing before this function was called. In this case, even if 
+      function is successful, it should return the error code given in the argument.
   */
-  virtual int do_after_row_operations(TABLE *table, int error) = 0;
-
-  /*
-    Primitive to prepare for handling one row in a row-level event.
-    
-    DESCRIPTION 
-
-      The member function prepares for execution of operations needed for one
-      row in a row-level event by reading up data from the buffer containing
-      the row. No specific interpretation of the data is normally done here,
-      since SQL thread specific data is not available: that data is made
-      available for the do_exec function.
-
-      A pointer to the start of the next row, or NULL if the preparation
-      failed. Currently, preparation cannot fail, but don't rely on this
-      behavior. 
-
-    RETURN VALUE
-      Error code, if something went wrong, 0 otherwise.
-   */
-  virtual int do_prepare_row(THD*, RELAY_LOG_INFO const*, TABLE*,
-                             uchar const *row_start,
-                             uchar const **row_end) = 0;
+  virtual 
+  int do_after_row_operations(const Slave_reporting_capability *const log,
+                              int error) = 0;
 
   /*
     Primitive to do the actual execution necessary for a row.
 
     DESCRIPTION
       The member function will do the actual execution needed to handle a row.
+      The row is located at m_curr_row. When the function returns, 
+      m_curr_row_end should point at the next row (one byte after the end
+      of the current row).    
 
     RETURN VALUE
       0 if execution succeeded, 1 if execution failed.
       
   */
-  virtual int do_exec_row(TABLE *table) = 0;
+  virtual int do_exec_row(const RELAY_LOG_INFO *const rli) = 0;
 #endif /* !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION) */
-};
 
+  friend class Old_rows_log_event;
+};
 
 /*****************************************************************************
 
@@ -2407,14 +2425,9 @@ class Write_rows_log_event : public Rows_log_event
 #endif
 
 #if !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION)
-  uchar *m_memory;
-  uchar *m_after_image;
-
-  virtual int do_before_row_operations(TABLE *table);
-  virtual int do_after_row_operations(TABLE *table, int error);
-  virtual int do_prepare_row(THD*, RELAY_LOG_INFO const*, TABLE*,
-                             uchar const *row_start, uchar const **row_end);
-  virtual int do_exec_row(TABLE *table);
+  virtual int do_before_row_operations(const Slave_reporting_capability *const);
+  virtual int do_after_row_operations(const Slave_reporting_capability *const,int);
+  virtual int do_exec_row(const RELAY_LOG_INFO *const);
 #endif
 };
 
@@ -2486,15 +2499,9 @@ class Update_rows_log_event : public Rows_log_event
 #endif
 
 #if !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION)
-  uchar *m_memory;
-  uchar *m_key;
-  uchar *m_after_image;
-
-  virtual int do_before_row_operations(TABLE *table);
-  virtual int do_after_row_operations(TABLE *table, int error);
-  virtual int do_prepare_row(THD*, RELAY_LOG_INFO const*, TABLE*,
-                             uchar const *row_start, uchar const **row_end);
-  virtual int do_exec_row(TABLE *table);
+  virtual int do_before_row_operations(const Slave_reporting_capability *const);
+  virtual int do_after_row_operations(const Slave_reporting_capability *const,int);
+  virtual int do_exec_row(const RELAY_LOG_INFO *const);
 #endif /* !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION) */
 };
 
@@ -2557,15 +2564,9 @@ class Delete_rows_log_event : public Rows_log_event
 #endif
 
 #if !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION)
-  uchar *m_memory;
-  uchar *m_key;
-  uchar *m_after_image;
-
-  virtual int do_before_row_operations(TABLE *table);
-  virtual int do_after_row_operations(TABLE *table, int error);
-  virtual int do_prepare_row(THD*, RELAY_LOG_INFO const*, TABLE*,
-                             uchar const *row_start, uchar const **row_end);
-  virtual int do_exec_row(TABLE *table);
+  virtual int do_before_row_operations(const Slave_reporting_capability *const);
+  virtual int do_after_row_operations(const Slave_reporting_capability *const,int);
+  virtual int do_exec_row(const RELAY_LOG_INFO *const);
 #endif
 };
 

sql/log_event_old.h

@@ -20,9 +20,90 @@
   Need to include this file at the proper position of log_event.h
  */
 
+  
+class Old_rows_log_event
+{
+ public:
+ 
+  virtual ~Old_rows_log_event() {}
+
+ protected:
+  
+#if !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION)
+
+  int do_apply_event(Rows_log_event*,const RELAY_LOG_INFO*);
+
+  /*
+    Primitive to prepare for a sequence of row executions.
+
+    DESCRIPTION
+
+      Before doing a sequence of do_prepare_row() and do_exec_row()
+      calls, this member function should be called to prepare for the
+      entire sequence. Typically, this member function will allocate
+      space for any buffers that are needed for the two member
+      functions mentioned above.
+
+    RETURN VALUE
+
+      The member function will return 0 if all went OK, or a non-zero
+      error code otherwise.
+  */
+  virtual int do_before_row_operations(TABLE *table) = 0;
+
+  /*
+    Primitive to clean up after a sequence of row executions.
+
+    DESCRIPTION
+    
+      After doing a sequence of do_prepare_row() and do_exec_row(),
+      this member function should be called to clean up and release
+      any allocated buffers.
+  */
+  virtual int do_after_row_operations(TABLE *table, int error) = 0;
+
+  /*
+    Primitive to prepare for handling one row in a row-level event.
+    
+    DESCRIPTION 
+
+      The member function prepares for execution of operations needed for one
+      row in a row-level event by reading up data from the buffer containing
+      the row. No specific interpretation of the data is normally done here,
+      since SQL thread specific data is not available: that data is made
+      available for the do_exec function.
+
+      A pointer to the start of the next row, or NULL if the preparation
+      failed. Currently, preparation cannot fail, but don't rely on this
+      behavior. 
 
-class Write_rows_log_event_old : public Write_rows_log_event
+    RETURN VALUE
+      Error code, if something went wrong, 0 otherwise.
+   */
+  virtual int do_prepare_row(THD*, RELAY_LOG_INFO const*, TABLE*,
+                             uchar const *row_start,
+                             uchar const **row_end) = 0;
+
+  /*
+    Primitive to do the actual execution necessary for a row.
+
+    DESCRIPTION
+      The member function will do the actual execution needed to handle a row.
+
+    RETURN VALUE
+      0 if execution succeeded, 1 if execution failed.
+      
+  */
+  virtual int do_exec_row(TABLE *table) = 0;
+
+#endif /* !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION) */
+};
+
+
+class Write_rows_log_event_old 
+ : public Write_rows_log_event, public Old_rows_log_event
 {
+
 public:
   enum
   {
@@ -49,14 +130,26 @@ class Write_rows_log_event_old : public Write_rows_log_event
   virtual Log_event_type get_type_code() { return (Log_event_type)TYPE_CODE; }
 
 #if !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION)
+  // use old definition of do_apply_event()
+  virtual int do_apply_event(const RELAY_LOG_INFO *rli)
+  { return Old_rows_log_event::do_apply_event(this,rli); }
+
+  // primitives for old version of do_apply_event()
+  virtual int do_before_row_operations(TABLE *table);
+  virtual int do_after_row_operations(TABLE *table, int error);
   virtual int do_prepare_row(THD*, RELAY_LOG_INFO const*, TABLE*,
                              uchar const *row_start, uchar const **row_end);
+  virtual int do_exec_row(TABLE *table);
+
 #endif
 };
 
 
-class Update_rows_log_event_old : public Update_rows_log_event
+class Update_rows_log_event_old 
+  : public Update_rows_log_event, public Old_rows_log_event
 {
+  uchar *m_after_image, *m_memory;
+  
 public:
   enum 
   {
@@ -67,14 +160,16 @@ class Update_rows_log_event_old : public Update_rows_log_event
 #if !defined(MYSQL_CLIENT)
   Update_rows_log_event_old(THD *thd, TABLE *table, ulong table_id,
                            MY_BITMAP const *cols, bool is_transactional)
-    : Update_rows_log_event(thd, table, table_id, cols, is_transactional)
+    : Update_rows_log_event(thd, table, table_id, cols, is_transactional),
+      m_after_image(NULL), m_memory(NULL)
   {
   }
 #endif
 #if defined(HAVE_REPLICATION)
   Update_rows_log_event_old(const char *buf, uint event_len, 
                             const Format_description_log_event *descr)
-    : Update_rows_log_event(buf, event_len, descr)
+    : Update_rows_log_event(buf, event_len, descr),
+      m_after_image(NULL), m_memory(NULL)
   {
   }
 #endif
@@ -83,14 +178,25 @@ class Update_rows_log_event_old : public Update_rows_log_event
   virtual Log_event_type get_type_code() { return (Log_event_type)TYPE_CODE; }
 
 #if !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION)
+  // use old definition of do_apply_event()
+  virtual int do_apply_event(const RELAY_LOG_INFO *rli)
+  { return Old_rows_log_event::do_apply_event(this,rli); }
+
+  // primitives for old version of do_apply_event()
+  virtual int do_before_row_operations(TABLE *table);
+  virtual int do_after_row_operations(TABLE *table, int error);
   virtual int do_prepare_row(THD*, RELAY_LOG_INFO const*, TABLE*,
                              uchar const *row_start, uchar const **row_end);
+  virtual int do_exec_row(TABLE *table);
 #endif /* !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION) */
 };
 
 
-class Delete_rows_log_event_old : public Delete_rows_log_event
+class Delete_rows_log_event_old 
+  : public Delete_rows_log_event, public Old_rows_log_event
 {
+  uchar *m_after_image, *m_memory;
+ 
 public:
   enum 
   {
@@ -101,14 +207,16 @@ class Delete_rows_log_event_old : public Delete_rows_log_event
 #if !defined(MYSQL_CLIENT)
   Delete_rows_log_event_old(THD *thd, TABLE *table, ulong table_id,
                            MY_BITMAP const *cols, bool is_transactional)
-    : Delete_rows_log_event(thd, table, table_id, cols, is_transactional)
+    : Delete_rows_log_event(thd, table, table_id, cols, is_transactional),
+      m_after_image(NULL), m_memory(NULL)
   {
   }
 #endif
 #if defined(HAVE_REPLICATION)
   Delete_rows_log_event_old(const char *buf, uint event_len,
                             const Format_description_log_event *descr)
-    : Delete_rows_log_event(buf, event_len, descr)
+    : Delete_rows_log_event(buf, event_len, descr),
+      m_after_image(NULL), m_memory(NULL)
   {
   }
 #endif
@@ -117,8 +225,16 @@ class Delete_rows_log_event_old : public Delete_rows_log_event
   virtual Log_event_type get_type_code() { return (Log_event_type)TYPE_CODE; }
 
 #if !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION)
+  // use old definition of do_apply_event()
+  virtual int do_apply_event(const RELAY_LOG_INFO *rli)
+  { return Old_rows_log_event::do_apply_event(this,rli); }
+
+  // primitives for old version of do_apply_event()
+  virtual int do_before_row_operations(TABLE *table);
+  virtual int do_after_row_operations(TABLE *table, int error);
   virtual int do_prepare_row(THD*, RELAY_LOG_INFO const*, TABLE*,
                              uchar const *row_start, uchar const **row_end);
+  virtual int do_exec_row(TABLE *table);
 #endif
 };
 

sql/rpl_record.cc

@@ -157,9 +157,8 @@ pack_row(TABLE *table, MY_BITMAP const* cols,
    the various member functions of Field and subclasses expect to
    write.
 
-   The row is assumed to only consist of the fields for which the
-   bitset represented by @c arr and @c bits; the other parts of the
-   record are left alone.
+   The row is assumed to only consist of the fields for which the corresponding
+   bit in bitset @c cols is set; the other parts of the record are left alone.
 
    At most @c colcnt columns are read: if the table is larger than
    that, the remaining fields are not filled in.
@@ -169,15 +168,12 @@ pack_row(TABLE *table, MY_BITMAP const* cols,
    @param colcnt  Number of columns to read from record
    @param row_data
                   Packed row data
-   @param cols    Pointer to columns data to fill in
+   @param cols    Pointer to bitset describing columns to fill in
    @param row_end Pointer to variable that will hold the value of the
                   one-after-end position for the row
    @param master_reclength
                   Pointer to variable that will be set to the length of the
                   record on the master side
-   @param rw_set  Pointer to bitmap that holds either the read_set or the
-                  write_set of the table
-
 
    @retval 0 No error
 
@@ -191,8 +187,7 @@ int
 unpack_row(RELAY_LOG_INFO const *rli,
            TABLE *table, uint const colcnt,
            uchar const *const row_data, MY_BITMAP const *cols,
-           uchar const **const row_end, ulong *const master_reclength,
-           MY_BITMAP* const rw_set, Log_event_type const event_type)
+           uchar const **const row_end, ulong *const master_reclength)
 {
   DBUG_ENTER("unpack_row");
   DBUG_ASSERT(row_data);
@@ -202,10 +197,6 @@ unpack_row(RELAY_LOG_INFO const *rli,
   uchar const *null_ptr= row_data;
   uchar const *pack_ptr= row_data + master_null_byte_count;
 
-  bitmap_clear_all(rw_set);
-
-  empty_record(table);
-
   Field **const begin_ptr = table->field;
   Field **field_ptr;
   Field **const end_ptr= begin_ptr + colcnt;
@@ -265,7 +256,6 @@ unpack_row(RELAY_LOG_INFO const *rli,
 #endif
       }
 
-      bitmap_set_bit(rw_set, f->field_index);
       null_mask <<= 1;
     }
     i++;
@@ -307,30 +297,58 @@ unpack_row(RELAY_LOG_INFO const *rli,
     else
       *master_reclength = table->s->reclength;
   }
+  
+  DBUG_RETURN(error);
+}
 
-  /*
-    Set properties for remaining columns, if there are any. We let the
-    corresponding bit in the write_set be set, to write the value if
-    it was not there already. We iterate over all remaining columns,
-    even if there were an error, to get as many error messages as
-    possible.  We are still able to return a pointer to the next row,
-    so redo that.
-
-    This generation of error messages is only relevant when inserting
-    new rows.
-   */
-  for ( ; *field_ptr ; ++field_ptr)
+/**
+  Fills @c table->record[0] with default values.
+
+  First @c empty_record() is called and then, additionally, fields are
+  initialized explicitly with a call to @c set_default().
+
+  For optimization reasons, the explicit initialization can be skipped for
+  first @c skip fields. This is useful if later we are going to fill these 
+  fields from other source (e.g. from a Rows replication event).
+
+  If @c check is true, fields are explicitly initialized only if they have
+  default value or can be NULL. Otherwise error is reported.
+ 
+  @param log    Used to report errors.
+  @param table  Table whose record[0] buffer is prepared. 
+  @param skip   Number of columns for which default value initialization 
+                should be skipped.
+  @param check  Indicates if errors should be checked when setting default
+                values.
+                
+  @returns 0 on success. 
+ */ 
+int prepare_record(const Slave_reporting_capability *const log, 
+                   TABLE *const table, 
+                   const uint skip, const bool check)
+{
+  DBUG_ENTER("prepare_record");
+
+  int error= 0;
+  empty_record(table);
+
+  if (skip >= table->s->fields)  // nothing to do
+    DBUG_RETURN(0);
+
+  /* Explicit initialization of fields */
+
+  for (Field **field_ptr= table->field+skip ; *field_ptr ; ++field_ptr)
   {
     uint32 const mask= NOT_NULL_FLAG | NO_DEFAULT_VALUE_FLAG;
     Field *const f= *field_ptr;
 
-    if (event_type == WRITE_ROWS_EVENT &&
-        ((*field_ptr)->flags & mask) == mask)
+    if (check && ((f->flags & mask) == mask))
     {
-      rli->report(ERROR_LEVEL, ER_NO_DEFAULT_FOR_FIELD,
+      DBUG_ASSERT(log);
+      log->report(ERROR_LEVEL, ER_NO_DEFAULT_FOR_FIELD,
                   "Field `%s` of table `%s`.`%s` "
                   "has no default value and cannot be NULL",
-                  (*field_ptr)->field_name, table->s->db.str,
+                  f->field_name, table->s->db.str,
                   table->s->table_name.str);
       error = ER_NO_DEFAULT_FOR_FIELD;
     }

sql/rpl_record.h

@@ -16,6 +16,8 @@
 #ifndef RPL_RECORD_H
 #define RPL_RECORD_H
 
+#include <rpl_reporting.h>
+
 #if !defined(MYSQL_CLIENT)
 size_t pack_row(TABLE* table, MY_BITMAP const* cols,
                 uchar *row_data, const uchar *data);
@@ -25,9 +27,11 @@ size_t pack_row(TABLE* table, MY_BITMAP const* cols,
 int unpack_row(RELAY_LOG_INFO const *rli,
                TABLE *table, uint const colcnt,
                uchar const *const row_data, MY_BITMAP const *cols,
-               uchar const **const row_end, ulong *const master_reclength,
-               MY_BITMAP* const rw_set,
-               Log_event_type const event_type);
+               uchar const **const row_end, ulong *const master_reclength);
+
+// Fill table's record[0] with default values.
+int prepare_record(const Slave_reporting_capability *const, TABLE *const, 
+                   const uint =0, const bool =FALSE);
 #endif
 
 #endif

sql/rpl_utility.cc

@@ -24,7 +24,7 @@
   This function returns the field size in raw bytes based on the type
   and the encoded field data from the master's raw data.
 */
-uint32 table_def::calc_field_size(uint col, uchar *master_data)
+uint32 table_def::calc_field_size(uint col, uchar *master_data) const
 {
   uint32 length;
 

sql/rpl_utility.h

@@ -218,7 +218,7 @@ class table_def
     WL#3915) or needs to advance the pointer for the fields in the raw 
     data from the master to a specific column.
   */
-  uint32 calc_field_size(uint col, uchar *master_data);
+  uint32 calc_field_size(uint col, uchar *master_data) const;
 
   /**
     Decide if the table definition is compatible with a table.
@@ -258,4 +258,44 @@ struct RPL_TABLE_LIST
   table_def m_tabledef;
 };
 
+
+/* Anonymous namespace for template functions/classes */
+namespace {
+
+  /*
+    Smart pointer that will automatically call my_afree (a macro) when
+    the pointer goes out of scope.  This is used so that I do not have
+    to remember to call my_afree() before each return.  There is no
+    overhead associated with this, since all functions are inline.
+
+    I (Matz) would prefer to use the free function as a template
+    parameter, but that is not possible when the "function" is a
+    macro.
+  */
+  template <class Obj>
+  class auto_afree_ptr
+  {
+    Obj* m_ptr;
+  public:
+    auto_afree_ptr(Obj* ptr) : m_ptr(ptr) { }
+    ~auto_afree_ptr() { if (m_ptr) my_afree(m_ptr); }
+    void assign(Obj* ptr) {
+      /* Only to be called if it hasn't been given a value before. */
+      DBUG_ASSERT(m_ptr == NULL);
+      m_ptr= ptr;
+    }
+    Obj* get() { return m_ptr; }
+  };
+
+}
+
+#define DBUG_PRINT_BITSET(N,FRM,BS)                \
+  do {                                             \
+    char buf[256];                                 \
+    for (uint i = 0 ; i < (BS)->n_bits ; ++i)      \
+      buf[i] = bitmap_is_set((BS), i) ? '1' : '0'; \
+    buf[(BS)->n_bits] = '\0';                      \
+    DBUG_PRINT((N), ((FRM), buf));                 \
+  } while (0)
+
 #endif /* RPL_UTILITY_H */