BUG#28722 (Multi-engine statements on has_own_binlogging engine):

Test fixes resulting from changed semantics.


mysql-test/extra/rpl_tests/rpl_row_UUID.test:
  Using same engine throughout to prevent NDB tests from failing.
mysql-test/r/binlog_multi_engine.result:
  Result change.
mysql-test/r/ndb_read_multi_range.result:
  Result change.
mysql-test/r/ndb_trigger.result:
  Result change.
mysql-test/r/rpl_ndb_UUID.result:
  Result change.
mysql-test/r/rpl_row_UUID.result:
  Result change.
mysql-test/t/binlog_multi_engine.test:
  Removing garbage.
mysql-test/t/ndb_read_multi_range.test:
  Using ndbcluster for table used inside trigger.
mysql-test/t/ndb_trigger.test:
  Using ndbcluster for table used inside trigger.

mysql-test/extra/rpl_tests/rpl_row_UUID.test

@@ -41,7 +41,7 @@ end|
 delimiter ;|
 # test both in SELECT and in INSERT
 select fn1(0);
-create table t2 (a int);
+eval create table t2 (a int) engine=$engine_type;
 insert into t2 values(fn1(2));
 
 sync_slave_with_master;

mysql-test/r/binlog_multi_engine.result

@@ -11,7 +11,6 @@ START TRANSACTION;
 INSERT INTO t1n VALUES (1,1), (1,2), (2,1), (2,2);
 UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
 UPDATE t1n, t1b SET e = 2, b = 3 WHERE f = c;
-ERROR HY000: Binary logging not possible. Message: Statement-based format required for this statement, but not allowed by this combination of engines
 COMMIT;
 TRUNCATE t1m;
 TRUNCATE t1b;
@@ -49,18 +48,6 @@ ERROR HY000: Binary logging not possible. Message: Statement cannot be written a
 TRUNCATE t1m;
 TRUNCATE t1b;
 TRUNCATE t1n;
-SET SESSION BINLOG_FORMAT=ROW;
-INSERT INTO t1m VALUES (1,1), (1,2), (2,1), (2,2);
-INSERT INTO t1b VALUES (1,1), (1,2), (2,1), (2,2);
-ERROR HY000: Binary logging not possible. Message: Row-based format required for this statement, but not allowed by this combination of engines
-INSERT INTO t1n VALUES (1,1), (1,2), (2,1), (2,2);
-UPDATE t1m, t1b SET m = 2, b = 3 WHERE n = c;
-ERROR HY000: Binary logging not possible. Message: Row-based format required for this statement, but not allowed by this combination of engines
-UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
-ERROR HY000: Binary logging not possible. Message: Statement cannot be written atomically since more than one engine involved and at least one engine is self-logging
-UPDATE t1n, t1b SET e = 2, b = 3 WHERE f = c;
-ERROR HY000: Binary logging not possible. Message: Row-based format required for this statement, but not allowed by this combination of engines
-DROP TABLE t1m, t1b, t1n;
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	use `test`; INSERT INTO t1m VALUES (1,1), (1,2), (2,1), (2,2)
@@ -84,8 +71,10 @@ ERROR HY000: Binary logging not possible. Message: Row-based format required for
 INSERT INTO t1n VALUES (1,1), (1,2), (2,1), (2,2);
 UPDATE t1m, t1b SET m = 2, b = 3 WHERE n = c;
 ERROR HY000: Binary logging not possible. Message: Row-based format required for this statement, but not allowed by this combination of engines
+UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
+ERROR HY000: Binary logging not possible. Message: Statement cannot be written atomically since more than one engine involved and at least one engine is self-logging
 UPDATE t1n, t1b SET e = 2, b = 3 WHERE f = c;
-ERROR HY000: Binary logging not possible. Message: Statement cannot be logged to the binary log in row-based nor statement-based format
+ERROR HY000: Binary logging not possible. Message: Row-based format required for this statement, but not allowed by this combination of engines
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Table_map	#	#	table_id: # (test.t1m)

mysql-test/r/ndb_read_multi_range.result

@@ -451,7 +451,7 @@ CREATE TABLE t2 (
 var1 int(2) NOT NULL,
 var2 int(2) NOT NULL,
 PRIMARY KEY  (var1)
-) ENGINE=MyISAM DEFAULT CHARSET=ascii CHECKSUM=1;
+) ENGINE=ndbcluster DEFAULT CHARSET=ascii CHECKSUM=1;
 CREATE TRIGGER testtrigger
 AFTER UPDATE ON t1 FOR EACH ROW BEGIN
 REPLACE INTO t2 SELECT * FROM t1 WHERE t1.var1 = NEW.var1;END|

mysql-test/r/ndb_trigger.result

 drop table if exists t1, t2, t3, t4, t5;
 create table t1 (id int primary key, a int not null, b decimal (63,30) default 0) engine=ndb;
-create table t2 (op char(1), a int not null, b decimal (63,30));
-create table t3 select 1 as i;
+create table t2 (op char(1), a int not null, b decimal (63,30)) engine=ndb;
+create table t3  engine=ndb select 1 as i;
 create table t4 (a int not null primary key, b int) engine=ndb;
 create table t5 (a int not null primary key, b int) engine=ndb;
 create trigger t1_bu before update on t1 for each row

mysql-test/r/rpl_ndb_UUID.result

@@ -24,7 +24,7 @@ end|
 select fn1(0);
 fn1(0)
 0
-create table t2 (a int);
+create table t2 (a int) engine=NDB;
 insert into t2 values(fn1(2));
 SHOW CREATE TABLE test.t1;
 Table	Create Table

mysql-test/r/rpl_row_UUID.result

@@ -24,7 +24,7 @@ end|
 select fn1(0);
 fn1(0)
 0
-create table t2 (a int);
+create table t2 (a int) engine=myisam;
 insert into t2 values(fn1(2));
 SHOW CREATE TABLE test.t1;
 Table	Create Table

mysql-test/t/binlog_multi_engine.test

@@ -54,7 +54,6 @@ UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
 
 #UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
 
->>>>>>>
 error ER_BINLOG_LOGGING_IMPOSSIBLE;
 UPDATE t1n, t1b SET e = 2, b = 3 WHERE f = c;
 

mysql-test/t/ndb_read_multi_range.test

@@ -286,7 +286,7 @@ CREATE TABLE t2 (
        var1 int(2) NOT NULL,
        var2 int(2) NOT NULL,
        PRIMARY KEY  (var1)
-     ) ENGINE=MyISAM DEFAULT CHARSET=ascii CHECKSUM=1;
+     ) ENGINE=ndbcluster DEFAULT CHARSET=ascii CHECKSUM=1;
 
 
 DELIMITER |;

mysql-test/t/ndb_trigger.test

@@ -19,8 +19,8 @@ drop table if exists t1, t2, t3, t4, t5;
 --enable_warnings
 
 create table t1 (id int primary key, a int not null, b decimal (63,30) default 0) engine=ndb;
-create table t2 (op char(1), a int not null, b decimal (63,30));
-create table t3 select 1 as i;
+create table t2 (op char(1), a int not null, b decimal (63,30)) engine=ndb;
+create table t3  engine=ndb select 1 as i;
 create table t4 (a int not null primary key, b int) engine=ndb;
 create table t5 (a int not null primary key, b int) engine=ndb;