1.2.12

zlib/CMakeLists.txt

@@ -3,7 +3,7 @@ set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON)
 
 project(zlib C)
 
-set(VERSION "1.2.11")
+set(VERSION "1.2.12")
 
 option(ASM686 "Enable building i686 assembly implementation")
 option(AMD64 "Enable building amd64 assembly implementation")

zlib/Makefile.in

@@ -32,7 +32,7 @@ CPP=$(CC) -E
 
 STATICLIB=libz.a
 SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.11
+SHAREDLIBV=libz.so.1.2.12
 SHAREDLIBM=libz.so.1
 LIBS=$(STATICLIB) $(SHAREDLIBV)
 
@@ -91,8 +91,8 @@ teststatic: static
 	  echo '		*** zlib test OK ***'; \
 	else \
 	  echo '		*** zlib test FAILED ***'; false; \
-	fi; \
-	rm -f $$TMPST
+	fi
+	@rm -f tmpst_$$
 
 testshared: shared
 	@LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
@@ -104,8 +104,8 @@ testshared: shared
 	  echo '		*** zlib shared test OK ***'; \
 	else \
 	  echo '		*** zlib shared test FAILED ***'; false; \
-	fi; \
-	rm -f $$TMPSH
+	fi
+	@rm -f tmpsh_$$
 
 test64: all64
 	@TMP64=tmp64_$$; \
@@ -113,8 +113,8 @@ test64: all64
 	  echo '		*** zlib 64-bit test OK ***'; \
 	else \
 	  echo '		*** zlib 64-bit test FAILED ***'; false; \
-	fi; \
-	rm -f $$TMP64
+	fi
+	@rm -f tmp64_$$
 
 infcover.o: $(SRCDIR)test/infcover.c $(SRCDIR)zlib.h zconf.h
 	$(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/infcover.c
@@ -376,15 +376,13 @@ clean:
 	rm -f contrib/infback9/*.gcda contrib/infback9/*.gcno contrib/infback9/*.gcov
 
 maintainer-clean: distclean
-distclean: clean zconf zconf.h.cmakein docs
+distclean: clean zconf zconf.h.cmakein
 	rm -f Makefile zlib.pc configure.log
 	-@rm -f .DS_Store
 	@if [ -f Makefile.in ]; then \
 	printf 'all:\n\t-@echo "Please use ./configure first.  Thank you."\n' > Makefile ; \
 	printf '\ndistclean:\n\tmake -f Makefile.in distclean\n' >> Makefile ; \
 	touch -r $(SRCDIR)Makefile.in Makefile ; fi
-	@if [ ! -f zconf.h.in ]; then rm -f zconf.h zconf.h.cmakein ; fi
-	@if [ ! -f zlib.3 ]; then rm -f zlib.3.pdf ; fi
 
 tags:
 	etags $(SRCDIR)*.[ch]

zlib/README

 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.11 is a general purpose data compression library.  All the code is
+zlib 1.2.12 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
@@ -31,7 +31,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
 issue of Dr.  Dobb's Journal; a copy of the article is available at
 http://marknelson.us/1997/01/01/zlib-engine/ .
 
-The changes made in version 1.2.11 are documented in the file ChangeLog.
+The changes made in version 1.2.12 are documented in the file ChangeLog.
 
 Unsupported third party contributions are provided in directory contrib/ .
 
@@ -84,7 +84,7 @@ Acknowledgments:
 
 Copyright notice:
 
- (C) 1995-2017 Jean-loup Gailly and Mark Adler
+ (C) 1995-2022 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -108,7 +108,10 @@ Copyright notice:
 If you use the zlib library in a product, we would appreciate *not* receiving
 lengthy legal documents to sign.  The sources are provided for free but without
 warranty of any kind.  The library has been entirely written by Jean-loup
-Gailly and Mark Adler; it does not include third-party code.
+Gailly and Mark Adler; it does not include third-party code.  We make all
+contributions to and distributions of this project solely in our personal
+capacity, and are not conveying any rights to any intellectual property of
+any third parties.
 
 If you redistribute modified sources, we would appreciate that you include in
 the file ChangeLog history information documenting your changes.  Please read

zlib/configure

@@ -87,6 +87,7 @@ build64=0
 gcc=0
 warn=0
 debug=0
+sanitize=0
 old_cc="$CC"
 old_cflags="$CFLAGS"
 OBJC='$(OBJZ) $(OBJG)'
@@ -137,6 +138,7 @@ case "$1" in
     -c* | --const) zconst=1; shift ;;
     -w* | --warn) warn=1; shift ;;
     -d* | --debug) debug=1; shift ;;
+    --sanitize) sanitize=1; shift ;;
     *)
       echo "unknown option: $1" | tee -a configure.log
       echo "$0 --help for help" | tee -a configure.log
@@ -165,8 +167,14 @@ extern int getchar();
 int hello() {return getchar();}
 EOF
 
-test -z "$CC" && echo Checking for ${CROSS_PREFIX}gcc... | tee -a configure.log
-cc=${CC-${CROSS_PREFIX}gcc}
+if test -z "$CC"; then
+  echo Checking for ${CROSS_PREFIX}gcc... | tee -a configure.log
+  if ${CROSS_PREFIX}gcc -v >/dev/null 2>&1; then
+    cc=${CROSS_PREFIX}gcc
+  else
+    cc=${CROSS_PREFIX}cc
+  fi
+fi
 cflags=${CFLAGS-"-O3"}
 # to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
 case "$cc" in
@@ -199,6 +207,9 @@ if test "$gcc" -eq 1 && ($cc -c $test.c) >> configure.log 2>&1; then
       CFLAGS="${CFLAGS} -Wall -Wextra -pedantic"
     fi
   fi
+  if test $sanitize -eq 1; then
+    CFLAGS="${CFLAGS} -fsanitize=address"
+  fi
   if test $debug -eq 1; then
     CFLAGS="${CFLAGS} -DZLIB_DEBUG"
     SFLAGS="${SFLAGS} -DZLIB_DEBUG"
@@ -367,8 +378,11 @@ else
   try()
   {
     show $*
-    ( $* ) >> configure.log 2>&1
+    got=`( $* ) 2>&1`
     ret=$?
+    if test "$got" != ""; then
+      printf "%s\n" "$got" >> configure.log
+    fi
     if test $ret -ne 0; then
       echo "(exit code "$ret")" >> configure.log
     fi
@@ -381,8 +395,11 @@ tryboth()
   show $*
   got=`( $* ) 2>&1`
   ret=$?
-  printf %s "$got" >> configure.log
+  if test "$got" != ""; then
+    printf "%s\n" "$got" >> configure.log
+  fi
   if test $ret -ne 0; then
+    echo "(exit code "$ret")" >> configure.log
     return $ret
   fi
   test "$got" = ""
@@ -457,17 +474,11 @@ size_t dummy = 0;
 EOF
 if try $CC -c $CFLAGS $test.c; then
   echo "Checking for size_t... Yes." | tee -a configure.log
-  need_sizet=0
 else
   echo "Checking for size_t... No." | tee -a configure.log
-  need_sizet=1
-fi
-
-echo >> configure.log
-
-# find the size_t integer type, if needed
-if test $need_sizet -eq 1; then
-  cat > $test.c <<EOF
+  # find a size_t integer type
+  # check for long long
+  cat > $test.c << EOF
 long long dummy = 0;
 EOF
   if try $CC -c $CFLAGS $test.c; then
@@ -495,17 +506,13 @@ EOF
   if try $CC $CFLAGS -o $test $test.c; then
     sizet=`./$test`
     echo "Checking for a pointer-size integer type..." $sizet"." | tee -a configure.log
+    CFLAGS="${CFLAGS} -DNO_SIZE_T=${sizet}"
+    SFLAGS="${SFLAGS} -DNO_SIZE_T=${sizet}"
   else
-    echo "Failed to find a pointer-size integer type." | tee -a configure.log
-    leave 1
+    echo "Checking for a pointer-size integer type... not found." | tee -a configure.log
   fi
 fi
 
-if test $need_sizet -eq 1; then
-  CFLAGS="${CFLAGS} -DNO_SIZE_T=${sizet}"
-  SFLAGS="${SFLAGS} -DNO_SIZE_T=${sizet}"
-fi
-
 echo >> configure.log
 
 # check for large file support, and if none, check for fseeko()
@@ -849,7 +856,6 @@ echo SHAREDLIBV = $SHAREDLIBV >> configure.log
 echo STATICLIB = $STATICLIB >> configure.log
 echo TEST = $TEST >> configure.log
 echo VER = $VER >> configure.log
-echo Z_U4 = $Z_U4 >> configure.log
 echo SRCDIR = $SRCDIR >> configure.log
 echo exec_prefix = $exec_prefix >> configure.log
 echo includedir = $includedir >> configure.log

zlib/contrib/README.contrib

@@ -8,14 +8,6 @@ ada/        by Dmitriy Anisimkov <anisimkov@yahoo.com>
         Support for Ada
         See http://zlib-ada.sourceforge.net/
 
-amd64/      by Mikhail Teterin <mi@ALDAN.algebra.com>
-        asm code for AMD64
-        See patch at http://www.freebsd.org/cgi/query-pr.cgi?pr=bin/96393
-
-asm686/     by Brian Raiter <breadbox@muppetlabs.com>
-        asm code for Pentium and PPro/PII, using the AT&T (GNU as) syntax
-        See http://www.muppetlabs.com/~breadbox/software/assembly.html
-
 blast/      by Mark Adler <madler@alumni.caltech.edu>
         Decompressor for output of PKWare Data Compression Library (DCL)
 
@@ -32,9 +24,6 @@ gcc_gvmat64/by Gilles Vollant <info@winimage.com>
 infback9/   by Mark Adler <madler@alumni.caltech.edu>
         Unsupported diffs to infback to decode the deflate64 format
 
-inflate86/  by Chris Anderson <christop@charm.net>
-        Tuned x86 gcc asm code to replace inflate_fast()
-
 iostream/   by Kevin Ruland <kevin@rodin.wustl.edu>
         A C++ I/O streams interface to the zlib gz* functions
 
@@ -45,16 +34,6 @@ iostream3/  by Ludwig Schwardt <schwardt@sun.ac.za>
             and Kevin Ruland <kevin@rodin.wustl.edu>
         Yet another C++ I/O streams interface
 
-masmx64/    by Gilles Vollant <info@winimage.com>
-        x86 64-bit (AMD64 and Intel EM64t) code for x64 assembler to
-        replace longest_match() and inflate_fast(),  also masm x86
-        64-bits translation of Chris Anderson inflate_fast()
-
-masmx86/    by Gilles Vollant <info@winimage.com>
-        x86 asm code to replace longest_match() and inflate_fast(),
-        for Visual C++ and MASM (32 bits).
-        Based on Brian Raiter (asm686) and Chris Anderson (inflate86)
-
 minizip/    by Gilles Vollant <info@winimage.com>
         Mini zip and unzip based on zlib
         Includes Zip64 support by Mathias Svensson <mathias@result42.com>

zlib/contrib/asm686/README.686

-This is a patched version of zlib, modified to use
-Pentium-Pro-optimized assembly code in the deflation algorithm. The
-files changed/added by this patch are:
-
-README.686
-match.S
-
-The speedup that this patch provides varies, depending on whether the
-compiler used to build the original version of zlib falls afoul of the
-PPro's speed traps. My own tests show a speedup of around 10-20% at
-the default compression level, and 20-30% using -9, against a version
-compiled using gcc 2.7.2.3. Your mileage may vary.
-
-Note that this code has been tailored for the PPro/PII in particular,
-and will not perform particuarly well on a Pentium.
-
-If you are using an assembler other than GNU as, you will have to
-translate match.S to use your assembler's syntax. (Have fun.)
-
-Brian Raiter
-breadbox@muppetlabs.com
-April, 1998
-
-
-Added for zlib 1.1.3:
-
-The patches come from
-http://www.muppetlabs.com/~breadbox/software/assembly.html
-
-To compile zlib with this asm file, copy match.S to the zlib directory
-then do:
-
-CFLAGS="-O3 -DASMV" ./configure
-make OBJA=match.o
-
-
-Update:
-
-I've been ignoring these assembly routines for years, believing that
-gcc's generated code had caught up with it sometime around gcc 2.95
-and the major rearchitecting of the Pentium 4. However, I recently
-learned that, despite what I believed, this code still has some life
-in it. On the Pentium 4 and AMD64 chips, it continues to run about 8%
-faster than the code produced by gcc 4.1.
-
-In acknowledgement of its continuing usefulness, I've altered the
-license to match that of the rest of zlib. Share and Enjoy!
-
-Brian Raiter
-breadbox@muppetlabs.com
-April, 2007

zlib/contrib/blast/blast.h

@@ -57,7 +57,7 @@ int blast(blast_in infun, void *inhow, blast_out outfun, void *outhow,
  * use by the application to pass an input descriptor to infun(), if desired.
  *
  * If left and in are not NULL and *left is not zero when blast() is called,
- * then the *left bytes are *in are consumed for input before infun() is used.
+ * then the *left bytes at *in are consumed for input before infun() is used.
  *
  * The output function is invoked: err = outfun(how, buf, len), where the bytes
  * to be written are buf[0..len-1].  If err is not zero, then blast() returns

zlib/contrib/delphi/ZLib.pas

@@ -152,7 +152,7 @@ procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
   const OutBuf: Pointer; BufSize: Integer);
 
 const
-  zlib_version = '1.2.11';
+  zlib_version = '1.2.12';
 
 type
   EZlibError = class(Exception);

zlib/contrib/dotzlib/DotZLib/UnitTests.cs

@@ -156,7 +156,7 @@ namespace DotZLibTests
         public void Info_Version()
         {
             Info info = new Info();
-            Assert.AreEqual("1.2.11", Info.Version);
+            Assert.AreEqual("1.2.12", Info.Version);
             Assert.AreEqual(32, info.SizeOfUInt);
             Assert.AreEqual(32, info.SizeOfULong);
             Assert.AreEqual(32, info.SizeOfPointer);

zlib/contrib/infback9/inftree9.c

 /* inftree9.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2017 Mark Adler
+ * Copyright (C) 1995-2022 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate9_copyright[] =
-   " inflate9 1.2.11 Copyright 1995-2017 Mark Adler ";
+   " inflate9 1.2.12 Copyright 1995-2022 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -64,7 +64,7 @@ unsigned short FAR *work;
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
         130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
-        133, 133, 133, 133, 144, 77, 202};
+        133, 133, 133, 133, 144, 199, 202};
     static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
         65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,

zlib/contrib/masmx64/bld_ml64.bat

-ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
-ml64.exe /Flgvmat64   /c /Zi gvmat64.asm

zlib/contrib/masmx64/inffas8664.c

-/* inffas8664.c is a hand tuned assembler version of inffast.c - fast decoding
- * version for AMD64 on Windows using Microsoft C compiler
- *
- * Copyright (C) 1995-2003 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- *
- * Copyright (C) 2003 Chris Anderson <christop@charm.net>
- * Please use the copyright conditions above.
- *
- * 2005 - Adaptation to Microsoft C Compiler for AMD64 by Gilles Vollant
- *
- * inffas8664.c call function inffas8664fnc in inffasx64.asm
- *  inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
- *
- * Dec-29-2003 -- I added AMD64 inflate asm support.  This version is also
- * slightly quicker on x86 systems because, instead of using rep movsb to copy
- * data, it uses rep movsw, which moves data in 2-byte chunks instead of single
- * bytes.  I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates
- * from http://fedora.linux.duke.edu/fc1_x86_64
- * which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with
- * 1GB ram.  The 64-bit version is about 4% faster than the 32-bit version,
- * when decompressing mozilla-source-1.3.tar.gz.
- *
- * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from
- * the gcc -S output of zlib-1.2.0/inffast.c.  Zlib-1.2.0 is in beta release at
- * the moment.  I have successfully compiled and tested this code with gcc2.96,
- * gcc3.2, icc5.0, msvc6.0.  It is very close to the speed of inffast.S
- * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX
- * enabled.  I will attempt to merge the MMX code into this version.  Newer
- * versions of this and inffast.S can be found at
- * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/
- *
- */
-
-#include <stdio.h>
-#include "zutil.h"
-#include "inftrees.h"
-#include "inflate.h"
-#include "inffast.h"
-
-/* Mark Adler's comments from inffast.c: */
-
-/*
-   Decode literal, length, and distance codes and write out the resulting
-   literal and match bytes until either not enough input or output is
-   available, an end-of-block is encountered, or a data error is encountered.
-   When large enough input and output buffers are supplied to inflate(), for
-   example, a 16K input buffer and a 64K output buffer, more than 95% of the
-   inflate execution time is spent in this routine.
-
-   Entry assumptions:
-
-        state->mode == LEN
-        strm->avail_in >= 6
-        strm->avail_out >= 258
-        start >= strm->avail_out
-        state->bits < 8
-
-   On return, state->mode is one of:
-
-        LEN -- ran out of enough output space or enough available input
-        TYPE -- reached end of block code, inflate() to interpret next block
-        BAD -- error in block data
-
-   Notes:
-
-    - The maximum input bits used by a length/distance pair is 15 bits for the
-      length code, 5 bits for the length extra, 15 bits for the distance code,
-      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
-      Therefore if strm->avail_in >= 6, then there is enough input to avoid
-      checking for available input while decoding.
-
-    - The maximum bytes that a single length/distance pair can output is 258
-      bytes, which is the maximum length that can be coded.  inflate_fast()
-      requires strm->avail_out >= 258 for each loop to avoid checking for
-      output space.
- */
-
-
-
-    typedef struct inffast_ar {
-/* 64   32                               x86  x86_64 */
-/* ar offset                              register */
-/*  0    0 */ void *esp;                /* esp save */
-/*  8    4 */ void *ebp;                /* ebp save */
-/* 16    8 */ unsigned char FAR *in;    /* esi rsi  local strm->next_in */
-/* 24   12 */ unsigned char FAR *last;  /*     r9   while in < last */
-/* 32   16 */ unsigned char FAR *out;   /* edi rdi  local strm->next_out */
-/* 40   20 */ unsigned char FAR *beg;   /*          inflate()'s init next_out */
-/* 48   24 */ unsigned char FAR *end;   /*     r10  while out < end */
-/* 56   28 */ unsigned char FAR *window;/*          size of window, wsize!=0 */
-/* 64   32 */ code const FAR *lcode;    /* ebp rbp  local strm->lencode */
-/* 72   36 */ code const FAR *dcode;    /*     r11  local strm->distcode */
-/* 80   40 */ size_t /*unsigned long */hold;       /* edx rdx  local strm->hold */
-/* 88   44 */ unsigned bits;            /* ebx rbx  local strm->bits */
-/* 92   48 */ unsigned wsize;           /*          window size */
-/* 96   52 */ unsigned write;           /*          window write index */
-/*100   56 */ unsigned lmask;           /*     r12  mask for lcode */
-/*104   60 */ unsigned dmask;           /*     r13  mask for dcode */
-/*108   64 */ unsigned len;             /*     r14  match length */
-/*112   68 */ unsigned dist;            /*     r15  match distance */
-/*116   72 */ unsigned status;          /*          set when state chng*/
-    } type_ar;
-#ifdef ASMINF
-
-void inflate_fast(strm, start)
-z_streamp strm;
-unsigned start;         /* inflate()'s starting value for strm->avail_out */
-{
-    struct inflate_state FAR *state;
-    type_ar ar;
-    void inffas8664fnc(struct inffast_ar * par);
-
-
-
-#if (defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )) || (defined(_MSC_VER) && defined(_M_AMD64))
-#define PAD_AVAIL_IN 6
-#define PAD_AVAIL_OUT 258
-#else
-#define PAD_AVAIL_IN 5
-#define PAD_AVAIL_OUT 257
-#endif
-
-    /* copy state to local variables */
-    state = (struct inflate_state FAR *)strm->state;
-
-    ar.in = strm->next_in;
-    ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN);
-    ar.out = strm->next_out;
-    ar.beg = ar.out - (start - strm->avail_out);
-    ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT);
-    ar.wsize = state->wsize;
-    ar.write = state->wnext;
-    ar.window = state->window;
-    ar.hold = state->hold;
-    ar.bits = state->bits;
-    ar.lcode = state->lencode;
-    ar.dcode = state->distcode;
-    ar.lmask = (1U << state->lenbits) - 1;
-    ar.dmask = (1U << state->distbits) - 1;
-
-    /* decode literals and length/distances until end-of-block or not enough
-       input data or output space */
-
-    /* align in on 1/2 hold size boundary */
-    while (((size_t)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) {
-        ar.hold += (unsigned long)*ar.in++ << ar.bits;
-        ar.bits += 8;
-    }
-
-    inffas8664fnc(&ar);
-
-    if (ar.status > 1) {
-        if (ar.status == 2)
-            strm->msg = "invalid literal/length code";
-        else if (ar.status == 3)
-            strm->msg = "invalid distance code";
-        else
-            strm->msg = "invalid distance too far back";
-        state->mode = BAD;
-    }
-    else if ( ar.status == 1 ) {
-        state->mode = TYPE;
-    }
-
-    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
-    ar.len = ar.bits >> 3;
-    ar.in -= ar.len;
-    ar.bits -= ar.len << 3;
-    ar.hold &= (1U << ar.bits) - 1;
-
-    /* update state and return */
-    strm->next_in = ar.in;
-    strm->next_out = ar.out;
-    strm->avail_in = (unsigned)(ar.in < ar.last ?
-                                PAD_AVAIL_IN + (ar.last - ar.in) :
-                                PAD_AVAIL_IN - (ar.in - ar.last));
-    strm->avail_out = (unsigned)(ar.out < ar.end ?
-                                 PAD_AVAIL_OUT + (ar.end - ar.out) :
-                                 PAD_AVAIL_OUT - (ar.out - ar.end));
-    state->hold = (unsigned long)ar.hold;
-    state->bits = ar.bits;
-    return;
-}
-
-#endif

zlib/contrib/masmx64/readme.txt

-Summary
--------
-This directory contains ASM implementations of the functions
-longest_match() and inflate_fast(), for 64 bits x86 (both AMD64 and Intel EM64t),
-for use with Microsoft Macro Assembler (x64) for AMD64 and Microsoft C++ 64 bits.
-
-gvmat64.asm is written by Gilles Vollant (2005), by using Brian Raiter 686/32 bits
-   assembly optimized version from Jean-loup Gailly original longest_match function
-
-inffasx64.asm and inffas8664.c were written by Chris Anderson, by optimizing
-   original function from Mark Adler
-
-Use instructions
-----------------
-Assemble the .asm files using MASM and put the object files into the zlib source
-directory.  You can also get object files here:
-
-     http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
-
-define ASMV and ASMINF in your project. Include inffas8664.c in your source tree,
-and inffasx64.obj and gvmat64.obj as object to link.
-
-
-Build instructions
-------------------
-run bld_64.bat with Microsoft Macro Assembler (x64) for AMD64 (ml64.exe)
-
-ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
-
-You can get Windows 2003 server DDK with ml64 and cl for AMD64 from
-  http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)

zlib/contrib/masmx86/bld_ml32.bat

-ml /coff /Zi /c /Flmatch686.lst match686.asm
-ml /coff /Zi /c /Flinffas32.lst inffas32.asm

zlib/contrib/masmx86/readme.txt

-
-Summary
--------
-This directory contains ASM implementations of the functions
-longest_match() and inflate_fast().
-
-
-Use instructions
-----------------
-Assemble using MASM, and copy the object files into the zlib source
-directory, then run the appropriate makefile, as suggested below.  You can
-donwload MASM from here:
-
-    http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=7a1c9da0-0510-44a2-b042-7ef370530c64
-
-You can also get objects files here:
-
-    http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
-
-Build instructions
-------------------
-* With Microsoft C and MASM:
-nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj"
-
-* With Borland C and TASM:
-make -f win32/Makefile.bor LOCAL_ZLIB="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj" OBJPA="+match686c.obj+match686.obj+inffas32.obj"
-

zlib/contrib/minizip/Makefile

 CC=cc
-CFLAGS=-O -I../..
+CFLAGS := $(CFLAGS) -O -I../..
 
 UNZ_OBJS = miniunz.o unzip.o ioapi.o ../../libz.a
 ZIP_OBJS = minizip.o zip.o   ioapi.o ../../libz.a
@@ -16,10 +16,14 @@ minizip:  $(ZIP_OBJS)
 	$(CC) $(CFLAGS) -o $@ $(ZIP_OBJS)
 
 test:	miniunz minizip
-	./minizip test readme.txt
+	@rm -f test.*
+	@echo hello hello hello > test.txt
+	./minizip test test.txt
 	./miniunz -l test.zip
-	mv readme.txt readme.old
+	@mv test.txt test.old
 	./miniunz test.zip
+	@cmp test.txt test.old
+	@rm -f test.*
 
 clean:
-	/bin/rm -f *.o *~ minizip miniunz
+	/bin/rm -f *.o *~ minizip miniunz test.*

zlib/contrib/minizip/configure.ac

 #                                               -*- Autoconf -*-
 # Process this file with autoconf to produce a configure script.
 
-AC_INIT([minizip], [1.2.11], [bugzilla.redhat.com])
+AC_INIT([minizip], [1.2.12], [bugzilla.redhat.com])
 AC_CONFIG_SRCDIR([minizip.c])
 AM_INIT_AUTOMAKE([foreign])
 LT_INIT

zlib/contrib/minizip/crypt.h

@@ -38,6 +38,7 @@ static int decrypt_byte(unsigned long* pkeys, const z_crc_t* pcrc_32_tab)
                      * unpredictable manner on 16-bit systems; not a problem
                      * with any known compiler so far, though */
 
+    (void)pcrc_32_tab;
     temp = ((unsigned)(*(pkeys+2)) & 0xffff) | 2;
     return (int)(((temp * (temp ^ 1)) >> 8) & 0xff);
 }
@@ -77,24 +78,24 @@ static void init_keys(const char* passwd,unsigned long* pkeys,const z_crc_t* pcr
     (update_keys(pkeys,pcrc_32_tab,c ^= decrypt_byte(pkeys,pcrc_32_tab)))
 
 #define zencode(pkeys,pcrc_32_tab,c,t) \
-    (t=decrypt_byte(pkeys,pcrc_32_tab), update_keys(pkeys,pcrc_32_tab,c), t^(c))
+    (t=decrypt_byte(pkeys,pcrc_32_tab), update_keys(pkeys,pcrc_32_tab,c), (Byte)t^(c))
 
 #ifdef INCLUDECRYPTINGCODE_IFCRYPTALLOWED
 
 #define RAND_HEAD_LEN  12
    /* "last resort" source for second part of crypt seed pattern */
 #  ifndef ZCR_SEED2
-#    define ZCR_SEED2 3141592654UL     /* use PI as default pattern */
+#    define ZCR_SEED2 3141592654L       /* use PI as default pattern */
 #  endif
 
-static int crypthead(const char* passwd,      /* password string */
-                     unsigned char* buf,      /* where to write header */
-                     int bufSize,
-                     unsigned long* pkeys,
-                     const z_crc_t* pcrc_32_tab,
-                     unsigned long crcForCrypting)
+static unsigned crypthead(const char* passwd,       /* password string */
+                          unsigned char* buf,       /* where to write header */
+                          int bufSize,
+                          unsigned long* pkeys,
+                          const z_crc_t* pcrc_32_tab,
+                          unsigned long crcForCrypting)
 {
-    int n;                       /* index in random header */
+    unsigned n;                  /* index in random header */
     int t;                       /* temporary */
     int c;                       /* random byte */
     unsigned char header[RAND_HEAD_LEN-2]; /* random header */

zlib/contrib/minizip/ioapi.c

@@ -58,7 +58,7 @@ ZPOS64_T call_ztell64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream
         return (*(pfilefunc->zfile_func64.ztell64_file)) (pfilefunc->zfile_func64.opaque,filestream);
     else
     {
-        uLong tell_uLong = (*(pfilefunc->ztell32_file))(pfilefunc->zfile_func64.opaque,filestream);
+        uLong tell_uLong = (uLong)(*(pfilefunc->ztell32_file))(pfilefunc->zfile_func64.opaque,filestream);
         if ((tell_uLong) == MAXU32)
             return (ZPOS64_T)-1;
         else
@@ -94,6 +94,7 @@ static int     ZCALLBACK ferror_file_func OF((voidpf opaque, voidpf stream));
 
 static voidpf ZCALLBACK fopen_file_func (voidpf opaque, const char* filename, int mode)
 {
+    (void)opaque;
     FILE* file = NULL;
     const char* mode_fopen = NULL;
     if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
@@ -112,6 +113,7 @@ static voidpf ZCALLBACK fopen_file_func (voidpf opaque, const char* filename, in
 
 static voidpf ZCALLBACK fopen64_file_func (voidpf opaque, const void* filename, int mode)
 {
+    (void)opaque;
     FILE* file = NULL;
     const char* mode_fopen = NULL;
     if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
@@ -131,6 +133,7 @@ static voidpf ZCALLBACK fopen64_file_func (voidpf opaque, const void* filename,
 
 static uLong ZCALLBACK fread_file_func (voidpf opaque, voidpf stream, void* buf, uLong size)
 {
+    (void)opaque;
     uLong ret;
     ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream);
     return ret;
@@ -138,6 +141,7 @@ static uLong ZCALLBACK fread_file_func (voidpf opaque, voidpf stream, void* buf,
 
 static uLong ZCALLBACK fwrite_file_func (voidpf opaque, voidpf stream, const void* buf, uLong size)
 {
+    (void)opaque;
     uLong ret;
     ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream);
     return ret;
@@ -145,6 +149,7 @@ static uLong ZCALLBACK fwrite_file_func (voidpf opaque, voidpf stream, const voi
 
 static long ZCALLBACK ftell_file_func (voidpf opaque, voidpf stream)
 {
+    (void)opaque;
     long ret;
     ret = ftell((FILE *)stream);
     return ret;
@@ -153,13 +158,15 @@ static long ZCALLBACK ftell_file_func (voidpf opaque, voidpf stream)
 
 static ZPOS64_T ZCALLBACK ftell64_file_func (voidpf opaque, voidpf stream)
 {
+    (void)opaque;
     ZPOS64_T ret;
-    ret = FTELLO_FUNC((FILE *)stream);
+    ret = (ZPOS64_T)FTELLO_FUNC((FILE *)stream);
     return ret;
 }
 
 static long ZCALLBACK fseek_file_func (voidpf  opaque, voidpf stream, uLong offset, int origin)
 {
+    (void)opaque;
     int fseek_origin=0;
     long ret;
     switch (origin)
@@ -176,13 +183,14 @@ static long ZCALLBACK fseek_file_func (voidpf  opaque, voidpf stream, uLong offs
     default: return -1;
     }
     ret = 0;
-    if (fseek((FILE *)stream, offset, fseek_origin) != 0)
+    if (fseek((FILE *)stream, (long)offset, fseek_origin) != 0)
         ret = -1;
     return ret;
 }
 
 static long ZCALLBACK fseek64_file_func (voidpf  opaque, voidpf stream, ZPOS64_T offset, int origin)
 {
+    (void)opaque;
     int fseek_origin=0;
     long ret;
     switch (origin)
@@ -200,7 +208,7 @@ static long ZCALLBACK fseek64_file_func (voidpf  opaque, voidpf stream, ZPOS64_T
     }
     ret = 0;
 
-    if(FSEEKO_FUNC((FILE *)stream, offset, fseek_origin) != 0)
+    if(FSEEKO_FUNC((FILE *)stream, (long)offset, fseek_origin) != 0)
                         ret = -1;
 
     return ret;
@@ -209,6 +217,7 @@ static long ZCALLBACK fseek64_file_func (voidpf  opaque, voidpf stream, ZPOS64_T
 
 static int ZCALLBACK fclose_file_func (voidpf opaque, voidpf stream)
 {
+    (void)opaque;
     int ret;
     ret = fclose((FILE *)stream);
     return ret;
@@ -216,6 +225,7 @@ static int ZCALLBACK fclose_file_func (voidpf opaque, voidpf stream)
 
 static int ZCALLBACK ferror_file_func (voidpf opaque, voidpf stream)
 {
+    (void)opaque;
     int ret;
     ret = ferror((FILE *)stream);
     return ret;