MDEV-31482: Lock wait timeout with INSERT-SELECT, autoinc, and statement-based replication

Remove the exception that InnoDB does not report auto-increment locks waits
to the parallel replication.

There was an assumption that these waits could not cause conflicts with
in-order parallel replication and thus need not be reported. However, this
assumption is wrong and it is possible to get conflicts that lead to hangs
for the duration of --innodb-lock-wait-timeout. This can be seen with three
transactions:

1. T1 is waiting for T3 on an autoinc lock
2. T2 is waiting for T1 to commit
3. T3 is waiting on a normal row lock held by T2

Here, T3 needs to be deadlock killed on the wait by T1.

Note: This should be null-merged to 10.6, as a different fix is needed
there due to InnoDB lock code changes.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>

mysql-test/suite/rpl/r/rpl_parallel_autoinc.result

+include/master-slave.inc
+[connection master]
+MDEV-31482: Lock wait timeout with INSERT-SELECT, autoinc, and statement-based replication
+include/rpl_connect.inc [creating slave2]
+include/rpl_connect.inc [creating slave3]
+connection master;
+ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
+CREATE TABLE t1 (a INT PRIMARY KEY AUTO_INCREMENT, b INT, c INT, INDEX (c)) ENGINE=InnoDB;
+INSERT INTO t1 (b,c) VALUES (0, 1), (0, 1), (0, 2), (0,3), (0, 5), (0, 7), (0, 8);
+CREATE TABLE t2 (a INT PRIMARY KEY, b INT) ENGINE=InnoDB;
+INSERT INTO t2 VALUES (10,1), (20,2), (30,3), (40,4), (50,5);
+CREATE TABLE t3 (a VARCHAR(20) PRIMARY KEY, b INT) ENGINE=InnoDB;
+INSERT INTO t3 VALUES ('row for T1', 0), ('row for T2', 0), ('row for T3', 0);
+include/save_master_gtid.inc
+connection slave;
+include/sync_with_master_gtid.inc
+include/stop_slave.inc
+set @@global.slave_parallel_threads= 3;
+set @@global.slave_parallel_mode= OPTIMISTIC;
+set @@global.innodb_lock_wait_timeout= 20;
+connection master;
+BEGIN;
+UPDATE t3 SET b=b+1 where a="row for T1";
+INSERT INTO t1(b, c) SELECT 1, t2.b FROM t2 WHERE a=10;
+Warnings:
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statements writing to a table with an auto-increment column after selecting from another table are unsafe because the order in which rows are retrieved determines what (if any) rows will be written. This order cannot be predicted and may differ on master and the slave
+COMMIT;
+DELETE FROM t1 WHERE c >= 4 and c < 6;
+BEGIN;
+UPDATE t3 SET b=b+1 where a="row for T3";
+INSERT INTO t1(b, c) SELECT 3, t2.b FROM t2 WHERE a >= 20 AND a <= 40;
+Warnings:
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statements writing to a table with an auto-increment column after selecting from another table are unsafe because the order in which rows are retrieved determines what (if any) rows will be written. This order cannot be predicted and may differ on master and the slave
+COMMIT;
+include/save_master_gtid.inc
+connection slave1;
+BEGIN;
+SELECT * FROM t3 WHERE a="row for T1" FOR UPDATE;
+a	b
+row for T1	0
+connection slave2;
+BEGIN;
+SELECT * FROM t3 WHERE a="row for T3" FOR UPDATE;
+a	b
+row for T3	0
+connection slave3;
+BEGIN;
+DELETE FROM t2 WHERE a=30;
+connection slave;
+include/start_slave.inc
+connection slave2;
+ROLLBACK;
+connection slave1;
+ROLLBACK;
+connection slave3;
+ROLLBACK;
+connection slave;
+include/sync_with_master_gtid.inc
+SELECT * FROM t1 ORDER BY a;
+a	b	c
+1	0	1
+2	0	1
+3	0	2
+4	0	3
+6	0	7
+7	0	8
+8	1	1
+9	3	2
+10	3	3
+11	3	4
+SELECT * FROM t2 ORDER BY a;
+a	b
+10	1
+20	2
+30	3
+40	4
+50	5
+SELECT * FROM t3 ORDER BY a;
+a	b
+row for T1	1
+row for T2	0
+row for T3	1
+connection master;
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format");
+DROP TABLE t1, t2, t3;
+connection slave;
+include/stop_slave.inc
+SET @@global.slave_parallel_threads= 0;
+SET @@global.slave_parallel_mode= conservative;
+SET @@global.innodb_lock_wait_timeout= 50;
+include/start_slave.inc
+SELECT @@GLOBAL.innodb_autoinc_lock_mode;
+@@GLOBAL.innodb_autoinc_lock_mode
+1
+include/rpl_end.inc

mysql-test/suite/rpl/t/rpl_parallel_autoinc.test

+--source include/have_binlog_format_statement.inc
+--source include/have_innodb.inc
+--source include/master-slave.inc
+
+--echo MDEV-31482: Lock wait timeout with INSERT-SELECT, autoinc, and statement-based replication
+
+# The scenario is transactions T1, T2, T3:
+#
+#   T1 is waiting for T3 on an autoinc lock
+#   T2 is waiting for T1 to commit
+#   T3 is waiting on a normal row lock held by T2
+#
+# This caused a hang until innodb_lock_wait_timeout, because autoinc
+# locks were not reported to the in-order parallel replication, so T3
+# was not deadlock killed.
+
+--let $lock_wait_timeout=20
+
+--let $rpl_connection_name= slave2
+--let $rpl_server_number= 2
+--source include/rpl_connect.inc
+
+--let $rpl_connection_name= slave3
+--let $rpl_server_number= 2
+--source include/rpl_connect.inc
+
+--connection master
+ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
+
+# A table as destination for INSERT-SELECT
+CREATE TABLE t1 (a INT PRIMARY KEY AUTO_INCREMENT, b INT, c INT, INDEX (c)) ENGINE=InnoDB;
+INSERT INTO t1 (b,c) VALUES (0, 1), (0, 1), (0, 2), (0,3), (0, 5), (0, 7), (0, 8);
+
+# A table as source for INSERT-SELECT.
+CREATE TABLE t2 (a INT PRIMARY KEY, b INT) ENGINE=InnoDB;
+INSERT INTO t2 VALUES (10,1), (20,2), (30,3), (40,4), (50,5);
+
+# A table to help order slave worker threads to setup the desired scenario.
+CREATE TABLE t3 (a VARCHAR(20) PRIMARY KEY, b INT) ENGINE=InnoDB;
+INSERT INTO t3 VALUES ('row for T1', 0), ('row for T2', 0), ('row for T3', 0);
+--source include/save_master_gtid.inc
+
+--connection slave
+--source include/sync_with_master_gtid.inc
+--source include/stop_slave.inc
+--let $save_innodb_lock_wait_timeout= `SELECT @@global.innodb_lock_wait_timeout`
+--let $save_slave_parallel_threads= `SELECT @@global.slave_parallel_threads`
+--let $save_slave_parallel_mode= `SELECT @@global.slave_parallel_mode`
+set @@global.slave_parallel_threads= 3;
+set @@global.slave_parallel_mode= OPTIMISTIC;
+eval set @@global.innodb_lock_wait_timeout= $lock_wait_timeout;
+
+--connection master
+# Transaction T1.
+BEGIN;
+UPDATE t3 SET b=b+1 where a="row for T1";
+INSERT INTO t1(b, c) SELECT 1, t2.b FROM t2 WHERE a=10;
+COMMIT;
+
+# Transaction T2.
+DELETE FROM t1 WHERE c >= 4 and c < 6;
+
+# Transaction T3.
+BEGIN;
+UPDATE t3 SET b=b+1 where a="row for T3";
+INSERT INTO t1(b, c) SELECT 3, t2.b FROM t2 WHERE a >= 20 AND a <= 40;
+COMMIT;
+
+--source include/save_master_gtid.inc
+
+--connection slave1
+# Temporarily block T1 to create the scheduling that triggers the bug.
+BEGIN;
+SELECT * FROM t3 WHERE a="row for T1" FOR UPDATE;
+
+--connection slave2
+# Temporarily block T3 from starting (so T2 can reach commit).
+BEGIN;
+SELECT * FROM t3 WHERE a="row for T3" FOR UPDATE;
+
+--connection slave3
+# This critical step blocks T3 after it has inserted its first row,
+# and thus taken the auto-increment lock, but before it has reached
+# the point where it gets a row lock wait on T2. Even though
+# auto-increment lock waits were not reported due to the bug,
+# transitive lock waits (T1 waits on autoinc of T3 which waits on row
+# on T2) _were_ reported as T1 waiting on T2, and thus a deadlock kill
+# happened and the bug was not triggered.
+BEGIN;
+DELETE FROM t2 WHERE a=30;
+
+--connection slave
+--source include/start_slave.inc
+
+# First let T2 complete until it is waiting for T1 to commit.
+--let $wait_condition= SELECT count(*)=1 FROM information_schema.processlist WHERE state='Waiting for prior transaction to commit' and command LIKE 'Slave_worker';
+--source include/wait_condition.inc
+
+# Then let T3 reach the point where it has obtained the autoinc lock,
+# but it is not yet waiting for a row lock held by T2.
+--connection slave2
+ROLLBACK;
+--let $wait_condition= SELECT count(*)=1 FROM information_schema.processlist WHERE state='Sending data' and info LIKE 'INSERT INTO t1(b, c) SELECT 3, t2.b%' and time_ms > 500 and command LIKE 'Slave_worker';
+--source include/wait_condition.inc
+
+# Now let T1 continue, while T3 is holding the autoinc lock but before
+# it is waiting for T2. Wait a short while to give the hang a chance to
+# happen; T1 needs to get to request the autoinc lock before we let T3
+# continue. (There's a small chance the sleep will be too small, which will
+# let the test occasionally pass on non-fixed server).
+--connection slave1
+ROLLBACK;
+--sleep 0.5
+
+# Now let T3 continue; the bug was that this lead to an undetected
+# deadlock that remained until innodb lock wait timeout.
+--connection slave3
+ROLLBACK;
+
+--connection slave
+--let $slave_timeout= `SELECT $lock_wait_timeout/2`
+--source include/sync_with_master_gtid.inc
+--let $slave_timeout=
+SELECT * FROM t1 ORDER BY a;
+SELECT * FROM t2 ORDER BY a;
+SELECT * FROM t3 ORDER BY a;
+
+# Cleanup.
+--connection master
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format");
+DROP TABLE t1, t2, t3;
+
+--connection slave
+--source include/stop_slave.inc
+eval SET @@global.slave_parallel_threads= $save_slave_parallel_threads;
+eval SET @@global.slave_parallel_mode= $save_slave_parallel_mode;
+eval SET @@global.innodb_lock_wait_timeout= $save_innodb_lock_wait_timeout;
+--source include/start_slave.inc
+SELECT @@GLOBAL.innodb_autoinc_lock_mode;
+--source include/rpl_end.inc

sql/sql_class.cc

@@ -5144,12 +5144,6 @@ thd_need_wait_reports(const MYSQL_THD thd)
   deadlock with the pre-determined commit order, we kill the later
   transaction, and later re-try it, to resolve the deadlock.
 
-  This call need only receive reports about waits for locks that will remain
-  until the holding transaction commits. InnoDB auto-increment locks,
-  for example, are released earlier, and so need not be reported. (Such false
-  positives are not harmful, but could lead to unnecessary kill and retry, so
-  best avoided).
-
   Returns 1 if the OTHER_THD will be killed to resolve deadlock, 0 if not. The
   actual kill will happen later, asynchronously from another thread. The
   caller does not need to take any actions on the return value if the

storage/innobase/lock/lock0lock.cc

@@ -6941,13 +6941,7 @@ DeadlockChecker::search()
 			return m_start;
 		}
 
-		/* We do not need to report autoinc locks to the upper
-		layer. These locks are released before commit, so they
-		can not cause deadlocks with binlog-fixed commit
-		order. */
-		if (m_report_waiters
-		    && (lock_get_type_low(lock) != LOCK_TABLE
-			|| lock_get_mode(lock) != LOCK_AUTO_INC)) {
+		if (m_report_waiters) {
 			thd_rpl_deadlock_check(m_start->mysql_thd,
 					       lock->trx->mysql_thd);
 		}