Merge romeo.(none):/home/bkroot/mysql-5.1-new-rpl

into  romeo.(none):/home/bk/b25688-mysql-5.1-rpl

mysql-test/r/rpl_ndb_circular_simplex.result

+stop slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+reset master;
+reset slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+start slave;
+CREATE TABLE t1 (a int key, b int) ENGINE=NDB;
+SHOW TABLES;
+Tables_in_test
+t1
+RESET MASTER;
+INSERT INTO t1 VALUES (1,2);
+INSERT INTO t1 VALUES (2,3);
+STOP SLAVE;
+CHANGE MASTER TO MASTER_HOST="127.0.0.1",MASTER_PORT=SLAVE_PORT,MASTER_USER="root";
+RESET MASTER;
+START SLAVE;
+SHOW SLAVE STATUS;
+Slave_IO_State	#
+Master_Host	127.0.0.1
+Master_User	root
+Master_Port	9308
+Connect_Retry	60
+Master_Log_File	slave-bin.000001
+Read_Master_Log_Pos	468
+Relay_Log_File	#
+Relay_Log_Pos	#
+Relay_Master_Log_File	slave-bin.000001
+Slave_IO_Running	Yes
+Slave_SQL_Running	Yes
+Replicate_Do_DB	
+Replicate_Ignore_DB	
+Replicate_Do_Table	
+Replicate_Ignore_Table	
+Replicate_Wild_Do_Table	
+Replicate_Wild_Ignore_Table	
+Last_Errno	0
+Last_Error	
+Skip_Counter	0
+Exec_Master_Log_Pos	468
+Relay_Log_Space	#
+Until_Condition	None
+Until_Log_File	
+Until_Log_Pos	0
+Master_SSL_Allowed	No
+Master_SSL_CA_File	
+Master_SSL_CA_Path	
+Master_SSL_Cert	
+Master_SSL_Cipher	
+Master_SSL_Key	
+Seconds_Behind_Master	#
+SELECT * FROM t1 ORDER BY a;
+a	b
+1	2
+2	3
+STOP SLAVE;
+START SLAVE;
+SELECT * FROM t1 ORDER BY a;
+a	b
+1	2
+2	3

mysql-test/t/rpl_ndb_circular_simplex.test

+--source include/have_ndb.inc
+--source include/have_binlog_format_row.inc
+--source include/master-slave.inc
+
+connection master;
+CREATE TABLE t1 (a int key, b int) ENGINE=NDB;
+sync_slave_with_master;
+SHOW TABLES;
+
+# Lose the events from the slave binary log: there is no
+# need to re-create the table on the master.
+connection slave;
+RESET MASTER;
+
+# Insert some values on the slave and master
+connection master;
+INSERT INTO t1 VALUES (1,2);
+# Switch to slave once event is applied and insert a row
+sync_slave_with_master;
+connection slave;
+INSERT INTO t1 VALUES (2,3);
+
+# ... it is now very probable that we have a mixed event in the binary
+# log.  If we don't, the test should still pass, but will not test the
+# mixed event situation.
+
+# The statement is disabled since it cannot reliably show the same
+# info all the time.  Use it for debug purposes.
+
+#SHOW BINLOG EVENTS;
+
+# Replicate back to the master to test this mixed event on the master
+STOP SLAVE;
+
+connection master;
+--replace_result $SLAVE_MYPORT SLAVE_PORT
+eval CHANGE MASTER TO MASTER_HOST="127.0.0.1",MASTER_PORT=$SLAVE_MYPORT,MASTER_USER="root";
+
+RESET MASTER;
+START SLAVE;
+
+connection slave;
+save_master_pos;
+connection master;
+sync_with_master;
+
+# The statement is disabled since it cannot reliably show the same
+# info all the time.  Use it for debug purposes.
+
+#SHOW BINLOG EVENTS;
+
+# Check that there is no error in replication
+--replace_result $MASTER_MYPORT MASTER_PORT
+--replace_column 1 # 8 # 9 # 23 # 33 #
+query_vertical SHOW SLAVE STATUS;
+
+# Check that we have the data on the master
+SELECT * FROM t1 ORDER BY a;
+
+# We should now have another mixed event, likely with "slave" server
+# id last, and with the STMT_END_F flag set.
+
+# The statement is disabled since it cannot reliably show the same
+# info all the time.  Use it for debug purposes.
+
+#SHOW BINLOG EVENTS;
+
+# now lets see that this data is applied correctly on the slave
+STOP SLAVE;
+save_master_pos;
+
+connection slave;
+START SLAVE;
+
+# check that we have the data on the slave
+sync_with_master;
+SELECT * FROM t1 ORDER BY a;

sql/item_func.cc

@@ -22,6 +22,7 @@
 
 #include "mysql_priv.h"
 #include "slave.h"				// for wait_for_master_pos
+#include "rpl_mi.h"
 #include <m_ctype.h>
 #include <hash.h>
 #include <time.h>

sql/log.cc

@@ -20,6 +20,7 @@
 #include "mysql_priv.h"
 #include "sql_repl.h"
 #include "rpl_filter.h"
+#include "rpl_rli.h"
 
 #include <my_dir.h>
 #include <stdarg.h>

sql/log_event.h

@@ -841,6 +841,7 @@ class Log_event
   }
 
 protected:
+
   /**
     Primitive to apply an event to the database.
 
@@ -2242,6 +2243,7 @@ class Rows_log_event : public Log_event
 
 #if !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION)
   virtual int do_apply_event(RELAY_LOG_INFO const *rli);
+  virtual int do_update_pos(RELAY_LOG_INFO *rli);
 
   /*
     Primitive to prepare for a sequence of row executions.

sql/mysqld.cc

@@ -17,6 +17,7 @@
 #include <m_ctype.h>
 #include <my_dir.h>
 #include "slave.h"
+#include "rpl_mi.h"
 #include "sql_repl.h"
 #include "rpl_filter.h"
 #include "repl_failsafe.h"

sql/repl_failsafe.cc

@@ -19,6 +19,7 @@
 #include "repl_failsafe.h"
 #include "sql_repl.h"
 #include "slave.h"
+#include "rpl_mi.h"
 #include "rpl_filter.h"
 #include "log_event.h"
 #include <mysql.h>

sql/rpl_mi.h

@@ -18,6 +18,9 @@
 
 #ifdef HAVE_REPLICATION
 
+#include "rpl_rli.h"
+
+
 /*****************************************************************************
 
   Replication IO Thread

sql/rpl_rli.cc

@@ -15,6 +15,7 @@
 
 #include "mysql_priv.h"
 
+#include "rpl_mi.h"
 #include "rpl_rli.h"
 #include <my_dir.h>    // For MY_STAT
 #include "sql_repl.h"  // For check_binlog_magic
@@ -37,7 +38,7 @@ st_relay_log_info::st_relay_log_info()
    inited(0), abort_slave(0), slave_running(0), until_condition(UNTIL_NONE),
    until_log_pos(0), retried_trans(0),
    tables_to_lock(0), tables_to_lock_count(0),
-   last_event_start_time(0)
+   last_event_start_time(0), m_flags(0)
 {
   DBUG_ENTER("st_relay_log_info::st_relay_log_info");
 
@@ -1086,6 +1087,52 @@ bool st_relay_log_info::cached_charset_compare(char *charset) const
 }
 
 
+void st_relay_log_info::stmt_done(my_off_t const event_master_log_pos,
+                                  time_t event_creation_time)
+{
+  clear_flag(IN_STMT);
+
+  /*
+    If in a transaction, and if the slave supports transactions, just
+    inc_event_relay_log_pos(). We only have to check for OPTION_BEGIN
+    (not OPTION_NOT_AUTOCOMMIT) as transactions are logged with
+    BEGIN/COMMIT, not with SET AUTOCOMMIT= .
+
+    CAUTION: opt_using_transactions means innodb || bdb ; suppose the
+    master supports InnoDB and BDB, but the slave supports only BDB,
+    problems will arise: - suppose an InnoDB table is created on the
+    master, - then it will be MyISAM on the slave - but as
+    opt_using_transactions is true, the slave will believe he is
+    transactional with the MyISAM table. And problems will come when
+    one does START SLAVE; STOP SLAVE; START SLAVE; (the slave will
+    resume at BEGIN whereas there has not been any rollback).  This is
+    the problem of using opt_using_transactions instead of a finer
+    "does the slave support _transactional handler used on the
+    master_".
+
+    More generally, we'll have problems when a query mixes a
+    transactional handler and MyISAM and STOP SLAVE is issued in the
+    middle of the "transaction". START SLAVE will resume at BEGIN
+    while the MyISAM table has already been updated.
+  */
+  if ((sql_thd->options & OPTION_BEGIN) && opt_using_transactions)
+    inc_event_relay_log_pos();
+  else
+  {
+    inc_group_relay_log_pos(event_master_log_pos);
+    flush_relay_log_info(this);
+    /*
+      Note that Rotate_log_event::do_apply_event() does not call this
+      function, so there is no chance that a fake rotate event resets
+      last_master_timestamp.  Note that we update without mutex
+      (probably ok - except in some very rare cases, only consequence
+      is that value may take some time to display in
+      Seconds_Behind_Master - not critical).
+    */
+    last_master_timestamp= event_creation_time;
+  }
+}
+
 #if !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION)
 void st_relay_log_info::cleanup_context(THD *thd, bool error)
 {
@@ -1112,6 +1159,7 @@ void st_relay_log_info::cleanup_context(THD *thd, bool error)
   m_table_map.clear_tables();
   close_thread_tables(thd);
   clear_tables_to_lock();
+  clear_flag(IN_STMT);
   last_event_start_time= 0;
   DBUG_VOID_RETURN;
 }

sql/rpl_rli.h

@@ -51,6 +51,17 @@ struct RPL_TABLE_LIST;
 
 typedef struct st_relay_log_info
 {
+  /**
+     Flags for the state of the replication.
+   */
+  enum enum_state_flag {
+    /** The replication thread is inside a statement */
+    IN_STMT,
+
+    /** Flag counter.  Should always be last */
+    STATE_FLAGS_COUNT
+  };
+
   /*
     If flag set, then rli does not store its state in any info file.
     This is the case only when we execute BINLOG SQL commands inside
@@ -314,6 +325,66 @@ typedef struct st_relay_log_info
     transaction).
    */
   time_t last_event_start_time;
+
+  /**
+    Helper function to do after statement completion.
+
+    This function is called from an event to complete the group by
+    either stepping the group position, if the "statement" is not
+    inside a transaction; or increase the event position, if the
+    "statement" is inside a transaction.
+
+    @param event_log_pos
+    Master log position of the event. The position is recorded in the
+    relay log info and used to produce information for <code>SHOW
+    SLAVE STATUS</code>.
+
+    @param event_creation_time
+    Timestamp for the creation of the event on the master side. The
+    time stamp is recorded in the relay log info and used to compute
+    the <code>Seconds_behind_master</code> field.
+  */
+  void stmt_done(my_off_t event_log_pos,
+                 time_t event_creation_time);
+
+
+  /**
+     Set the value of a replication state flag.
+
+     @param flag Flag to set
+   */
+  void set_flag(enum_state_flag flag)
+  {
+    m_flags |= (1UL << flag);
+  }
+
+  /**
+     Clear the value of a replication state flag.
+
+     @param flag Flag to clear
+   */
+  void clear_flag(enum_state_flag flag)
+  {
+    m_flags &= ~(1UL << flag);
+  }
+
+  /**
+     Is the replication inside a group?
+
+     Replication is inside a group if either:
+     - The OPTION_BEGIN flag is set, meaning we're inside a transaction
+     - The RLI_IN_STMT flag is set, meaning we're inside a statement
+
+     @retval true Replication thread is currently inside a group
+     @retval false Replication thread is currently not inside a group
+   */
+  bool is_in_group() const {
+    return (sql_thd->options & OPTION_BEGIN) ||
+      (m_flags & (1UL << IN_STMT));
+  }
+
+private:
+  uint32 m_flags;
 } RELAY_LOG_INFO;
 
 

sql/set_var.cc

@@ -51,6 +51,7 @@
 #include "mysql_priv.h"
 #include <mysql.h>
 #include "slave.h"
+#include "rpl_mi.h"
 #include <my_getopt.h>
 #include <thr_alarm.h>
 #include <myisam.h>

sql/slave.cc

@@ -17,8 +17,9 @@
 
 #include <mysql.h>
 #include <myisam.h>
-#include "rpl_rli.h"
 #include "slave.h"
+#include "rpl_mi.h"
+#include "rpl_rli.h"
 #include "sql_repl.h"
 #include "rpl_filter.h"
 #include "repl_failsafe.h"
@@ -1736,11 +1737,12 @@ static int exec_relay_log_event(THD* thd, RELAY_LOG_INFO* rli)
     /*
     */
 
-    DBUG_PRINT("info",("type_code=%d (%s), server_id=%d",
-                       type_code, ev->get_type_str(), ev->server_id));
-    DBUG_PRINT("info", ("thd->options={ %s%s}",
+    DBUG_PRINT("exec_event",("%s(type_code: %d; server_id: %d)",
+                       ev->get_type_str(), type_code, ev->server_id));
+    DBUG_PRINT("info", ("thd->options: %s%s; rli->last_event_start_time: %lu",
                         FLAGSTR(thd->options, OPTION_NOT_AUTOCOMMIT),
-                        FLAGSTR(thd->options, OPTION_BEGIN)));
+                        FLAGSTR(thd->options, OPTION_BEGIN),
+                        rli->last_event_start_time));
 
 
 
@@ -1782,21 +1784,21 @@ static int exec_relay_log_event(THD* thd, RELAY_LOG_INFO* rli)
     if (reason == Log_event::EVENT_SKIP_NOT)
       exec_res= ev->apply_event(rli);
 #ifndef DBUG_OFF
-    else
-    {
-      /*
-        This only prints information to the debug trace.
+    /*
+      This only prints information to the debug trace.
 
-        TODO: Print an informational message to the error log?
-       */
-      static const char *const explain[] = {
-        "event was not skipped",                  // EVENT_SKIP_NOT,
-        "event originated from this server",      // EVENT_SKIP_IGNORE,
-        "event skip counter was non-zero"         // EVENT_SKIP_COUNT
-      };
-      DBUG_PRINT("info", ("%s was skipped because %s",
-                          ev->get_type_str(), explain[reason]));
-    }
+      TODO: Print an informational message to the error log?
+    */
+    static const char *const explain[] = {
+      // EVENT_SKIP_NOT,
+      "not skipped",
+      // EVENT_SKIP_IGNORE,
+      "skipped because event originated from this server",
+      // EVENT_SKIP_COUNT
+      "skipped because event skip counter was non-zero"
+    };
+    DBUG_PRINT("skip_event", ("%s event was %s",
+                              ev->get_type_str(), explain[reason]));
 #endif
 
     DBUG_PRINT("info", ("apply_event error = %d", exec_res));

sql/slave.h

@@ -22,13 +22,18 @@
 #include "my_list.h"
 #include "rpl_filter.h"
 #include "rpl_tblmap.h"
-#include "rpl_rli.h"
-#include "rpl_mi.h"
 
 #define SLAVE_NET_TIMEOUT  3600
 
 #define MAX_SLAVE_ERROR    2000
 
+
+// Forward declarations
+struct st_relay_log_info;
+typedef st_relay_log_info RELAY_LOG_INFO;
+
+class MASTER_INFO;
+
 /*****************************************************************************
 
   MySQL Replication

sql/sql_binlog.cc

@@ -14,6 +14,7 @@
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA */
 
 #include "mysql_priv.h"
+#include "rpl_rli.h"
 #include "base64.h"
 
 /*

sql/sql_class.cc

@@ -26,6 +26,7 @@
 #endif
 
 #include "mysql_priv.h"
+#include "rpl_rli.h"
 #include <my_bitmap.h>
 #include "log_event.h"
 #include <m_ctype.h>

sql/sql_class.h

@@ -21,9 +21,11 @@
 #endif
 
 #include "log.h"
-#include "rpl_rli.h"
 #include "rpl_tblmap.h"
 
+struct st_relay_log_info;
+typedef st_relay_log_info RELAY_LOG_INFO;
+
 class Query_log_event;
 class Load_log_event;
 class Slave_log_event;

sql/sql_insert.cc

@@ -60,6 +60,7 @@
 #include "sql_select.h"
 #include "sql_show.h"
 #include "slave.h"
+#include "rpl_mi.h"
 
 #ifndef EMBEDDED_LIBRARY
 static TABLE *delayed_get_table(THD *thd,TABLE_LIST *table_list);

sql/sql_repl.cc

@@ -16,6 +16,7 @@
 #include "mysql_priv.h"
 #ifdef HAVE_REPLICATION
 
+#include "rpl_mi.h"
 #include "sql_repl.h"
 #include "log_event.h"
 #include "rpl_filter.h"