Bug#22725 Replication outages from ER_SERVER_SHUTDOWN (1053) set in replication events

  
The reason for the bug was that replaying of a query on slave could not be possible since its event
was recorded with the killed error. Due to the specific of handling INSERT, which per-row-while-loop is 
unbreakable to killing, the query on transactional table should have not appeared in binlog unless
there was  a call to a stored routine that got interrupted with killing (and then there must be an error
returned out of the loop).
   
The offered solution added the following rule for binlogging of INSERT that accounts the above
specifics:
For INSERT on transactional-table if the error was not set the only raised flag
is harmless and is ignored via masking out on time of creation of binlog event.
   
For both table types the combination of raised error and KILLED flag indicates that there
was potentially partial execution on master and consistency is under the question.
In that case the code continues to binlog an event with an appropriate killed error.
 
The fix relies on the specified behaviour of stored routine that must propagate the error 
to the top level query handling if the thd->killed flag was raised in the routine execution.
   
The patch adds an arg with the default killed-status-unset value to Query_log_event::Query_log_event.


sql/log_event.cc:
  killed_status as the value of thd->killed can be passed as an arg to the constructor.
  if the value is different from the default the arg is set to the current thd->killed value.
  A caller might need to masquerade thd->killed with THD::NOT_KILLED.
  So far only mysql_insert() uses such explicit way to tell the constructor about killing status.
sql/log_event.h:
  default arg to the constructor with meaning of killed status of the query. 
  if the arg is not explicitly provided the status of thd->killed will be snapshot 
  inside of the constuctor, which is potentially incorrect (see bug#27571)
sql/sql_class.h:
  extending killed_state with no-state member.
sql/sql_insert.cc:
  ignore the KILLED flag incl KILL_BAD_DATA when the INSERT query event 
  is created without an `error';
sql/sql_update.cc:
  Suggestion how to fix bug#27571 as comments.
mysql-test/r/binlog_killed.result:
  new result file
mysql-test/t/binlog_killed.test:
  regression tests also apply for bug27563, BUG#27565

mysql-test/r/binlog_killed.result

+create function bug27563() 
+RETURNS int(11)
+DETERMINISTIC
+begin
+select get_lock("a", 10)  into @a;
+return 1;
+end|
+create function bug27565() 
+RETURNS int(11)
+DETERMINISTIC
+begin
+select a from t1 where a=1  into @a for update;
+return 1;
+end|
+create table t1 (a int auto_increment, b int, PRIMARY KEY (a)) ENGINE=InnoDB;
+create table t2 (a int auto_increment, b int, PRIMARY KEY (a)) ENGINE=MyISAM;
+create table t3 (a int auto_increment, b int, PRIMARY KEY (a)) ENGINE=InnoDB;
+reset master;
+select get_lock("a", 20);
+get_lock("a", 20)
+1
+insert into t1 values (bug27563(),1);
+kill query 3;
+affected rows: 1
+show master status /* must be only FD event unless Bug#27563 */;
+File	Position	Binlog_Do_DB	Binlog_Ignore_DB
+master-bin.000001	260		
+select count(*) from t1 /* must be zero unless Bug#27563 */;
+count(*)
+1
+begin;
+insert into t1 values (bug27563(),1);
+kill query 3;
+affected rows: 1
+select count(*) from t1 /* must be zero unless Bug#27563 */;
+count(*)
+2
+commit;
+reset master;
+insert into t2 values (bug27563(),1);
+kill query 3;
+select count(*) from t2 /* must be one */;
+count(*)
+1
+show master status  /* must have the insert event more to FD */;
+File	Position	Binlog_Do_DB	Binlog_Ignore_DB
+master-bin.000001	225		
+select RELEASE_LOCK("a");
+RELEASE_LOCK("a")
+1
+delete from t1;
+delete from t2;
+insert into t1 values (1,1);
+insert into t2 values (1,1);
+begin;
+update t1 set b=0 where a=1;
+update t2 set b=bug27565()-1 where a=1;
+kill query 3;
+commit;
+Got one of the listed errors
+select * from t1 /* must be: (1,0) */;
+a	b
+1	0
+select * from t2 /* must be as before: (1,1) */;
+a	b
+1	1
+delete from t3;
+reset master;
+begin;
+update t1 set b=0 where a=1;
+insert into t3 values  (0,0),(1,bug27565());
+kill query 3;
+rollback;
+Got one of the listed errors
+select count(*) from t3 /* must be zero */;
+count(*)
+0
+show master status /* nothing in binlog */;
+File	Position	Binlog_Do_DB	Binlog_Ignore_DB
+master-bin.000001	98		
+delete from t2;
+reset master;
+begin;
+update t1 set b=0 where a=1;
+insert into t2 values (0,0),(1,bug27565()) /* non-ta t2 */;
+kill query 3;
+rollback;
+Got one of the listed errors
+select count(*) from t2    /* count must be one */;
+count(*)
+1
+show master status /* insert into non-ta must be in binlog */;
+File	Position	Binlog_Do_DB	Binlog_Ignore_DB
+master-bin.000001	247		
+select
+(@a:=load_file("MYSQLTEST_VARDIR/tmp/kill_query_calling_sp.binlog"))
+is not null;
+(@a:=load_file("MYSQLTEST_VARDIR/tmp/kill_query_calling_sp.binlog"))
+is not null
+1
+select @a like "%#%error_code=1317%" /* must return 1 */;
+@a like "%#%error_code=1317%"
+1
+drop table t1,t2,t3;
+drop function bug27563;
+drop function bug27565;

mysql-test/t/binlog_killed.test

+-- source include/have_innodb.inc
+
+###
+### bug#22725 : incorrect killed error in binlogged query
+### and
+### Bug#27563 killing noticed in SF() stack but the error gets missed in action
+### Bug#27565 killed query of SF() is not reported correctly and
+###
+
+connect (con1, localhost, root,,);
+connect (con2, localhost, root,,);
+
+# the function is *insensitive* to killing - TO FIX IN BUG#27563
+# the function is used in the test anyway with `TODO' left
+# to correct results afterwards
+
+delimiter |;
+create function bug27563() 
+RETURNS int(11)
+DETERMINISTIC
+begin
+  select get_lock("a", 10)  into @a;
+  return 1;
+end|
+delimiter ;|
+
+# the function is sensitive to killing requiring innodb though with wrong client error 
+# TO FIX in BUG#27565; TODO: remove --error 1105 afterwards
+delimiter |;
+create function bug27565() 
+RETURNS int(11)
+DETERMINISTIC
+begin
+  select a from t1 where a=1  into @a for update;
+  return 1;
+end|
+delimiter ;|
+
+create table t1 (a int auto_increment, b int, PRIMARY KEY (a)) ENGINE=InnoDB;
+create table t2 (a int auto_increment, b int, PRIMARY KEY (a)) ENGINE=MyISAM;
+create table t3 (a int auto_increment, b int, PRIMARY KEY (a)) ENGINE=InnoDB;
+reset master;
+
+
+### ta table case: killing causes rollback
+
+# A. autocommit ON
+connection con1;
+select get_lock("a", 20);
+
+connection con2;
+let $ID= `select connection_id()`;
+send insert into t1 values (bug27563(),1);
+
+connection con1;
+eval kill query $ID;
+
+connection con2;
+# todo (re-record test): after bugs 27563,27565 got fixed affected rows will report zero
+--enable_info
+# todo: remove 0 return after fixing Bug#27563
+--error 0,ER_QUERY_INTERRUPTED
+reap;
+--disable_info
+###--replace_column 2 # 5 #
+### show binlog events from 98 /* nothing in binlog unless Bug#27563 */;
+show master status /* must be only FD event unless Bug#27563 */;
+select count(*) from t1 /* must be zero unless Bug#27563 */;
+
+# M. multi-statement-ta
+connection con2;
+let $ID= `select connection_id()`;
+begin;
+send insert into t1 values (bug27563(),1);
+
+connection con1;
+eval kill query $ID;
+connection con2;
+# todo (re-record test): after bugs 27563,27565 got fixed affected rows will report zero
+--enable_info
+# todo: remove 0 return after fixing  Bug#27563
+--error 0,ER_QUERY_INTERRUPTED
+reap;
+--disable_info
+select count(*) from t1 /* must be zero unless Bug#27563 */;
+commit;
+
+
+### non-ta table case: killing must be recorded in binlog
+
+reset master;
+
+connection con2;
+let $ID= `select connection_id()`;
+send insert into t2 values (bug27563(),1);
+
+connection con1;
+eval kill query $ID;
+
+connection con2;
+# todo: remove 0 return after fixing  Bug#27563
+--error 0,ER_QUERY_INTERRUPTED
+reap;
+select count(*) from t2 /* must be one */;
+#show binlog events from 98 /* must have the insert on non-ta table */;
+show master status  /* must have the insert event more to FD */;
+# the value of the error flag of KILLED_QUERY is tested further
+
+connection con1;
+select RELEASE_LOCK("a");
+
+### test with effective killing of SF()
+
+delete from t1;
+delete from t2;
+insert into t1 values (1,1);
+insert into t2 values (1,1);
+
+# 
+# Bug#27565
+# test where KILL is propagated as error to the top level
+# still another bug with the error message to the user
+# todo: fix reexecute the result file after fixing
+# 
+begin; update t1 set b=0 where a=1;
+
+connection con2;
+let $ID= `select connection_id()`;
+send update t2 set b=bug27565()-1 where a=1;
+
+connection con1;
+eval kill query $ID;
+commit;
+
+connection con2;
+# todo: fix Bug #27565 killed query of SF() is not reported correctly and 
+# remove 1105 (wrong)
+#--error ER_QUERY_INTERRUPTED
+--error 1105,ER_QUERY_INTERRUPTED
+reap;
+select * from t1 /* must be: (1,0) */;
+select * from t2 /* must be as before: (1,1) */;
+
+## bug#22725 with effective and propagating killing
+#
+# top-level ta-table
+connection con1;
+delete from t3;
+reset master;
+begin; update t1 set b=0 where a=1;
+
+connection con2;
+let $ID= `select connection_id()`;
+# the query won't perform completely since the function gets interrupted
+send insert into t3 values  (0,0),(1,bug27565());
+
+connection con1;
+eval kill query $ID;
+rollback;
+
+connection con2;
+# todo: fix Bug #27565 killed query of SF() is not reported correctly and 
+# remove 1105 (wrong)
+#--error ER_QUERY_INTERRUPTED
+--error 1105,ER_QUERY_INTERRUPTED
+reap;
+select count(*) from t3 /* must be zero */;
+show master status /* nothing in binlog */;
+
+# top-level non-ta-table
+connection con1;
+delete from t2;
+reset master;
+begin;  update t1 set b=0 where a=1;
+
+connection con2;
+let $ID= `select connection_id()`;
+# the query won't perform completely since the function gets intrurrupted
+send insert into t2 values (0,0),(1,bug27565()) /* non-ta t2 */;
+
+connection con1;
+eval kill query $ID;
+rollback;
+
+connection con2;
+# todo: fix Bug #27565 killed query of SF() is not reported correctly and 
+# remove 1105 (wrong)
+#--error ER_QUERY_INTERRUPTED
+--error 1105,ER_QUERY_INTERRUPTED
+reap;
+
+select count(*) from t2    /* count must be one */;
+show master status /* insert into non-ta must be in binlog */;
+--exec $MYSQL_BINLOG --start-position=126 $MYSQLTEST_VARDIR/log/master-bin.000001 > $MYSQLTEST_VARDIR/tmp/kill_query_calling_sp.binlog
+--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
+eval select
+(@a:=load_file("$MYSQLTEST_VARDIR/tmp/kill_query_calling_sp.binlog"))
+is not null;
+--replace_result $MYSQL_TEST_DIR MYSQL_TEST_DIR
+eval select @a like "%#%error_code=1317%" /* must return 1 */;
+system rm $MYSQLTEST_VARDIR/tmp/kill_query_calling_sp.binlog ;
+
+drop table t1,t2,t3;
+drop function bug27563;
+drop function bug27565;
+

sql/log_event.cc

@@ -1279,20 +1279,31 @@ Query_log_event::Query_log_event()
 
 
 /*
-  Query_log_event::Query_log_event()
+  SYNOPSIS
+    Query_log_event::Query_log_event()
+      thd               - thread handle
+      query_arg         - array of char representing the query
+      query_length      - size of the  `query_arg' array
+      using_trans       - there is a modified transactional table
+      suppress_use      - suppress the generation of 'USE' statements
+      killed_status_arg - an optional with default to THD::KILLED_NO_VALUE
+                          if the value is different from the default, the arg
+                          is set to the current thd->killed value.
+                          A caller might need to masquerade thd->killed with
+                          THD::NOT_KILLED.
+  DESCRIPTION
+  Creates an event for binlogging
+  The value for local `killed_status' can be supplied by caller.
 */
 Query_log_event::Query_log_event(THD* thd_arg, const char* query_arg,
 				 ulong query_length, bool using_trans,
-				 bool suppress_use)
+				 bool suppress_use, THD::killed_state killed_status_arg)
   :Log_event(thd_arg,
 	     ((thd_arg->tmp_table_used ? LOG_EVENT_THREAD_SPECIFIC_F : 0)
 	      | (suppress_use          ? LOG_EVENT_SUPPRESS_USE_F    : 0)),
 	     using_trans),
    data_buf(0), query(query_arg), catalog(thd_arg->catalog),
    db(thd_arg->db), q_len((uint32) query_length),
-   error_code((thd_arg->killed != THD::NOT_KILLED) ?
-              ((thd_arg->system_thread & SYSTEM_THREAD_DELAYED_INSERT) ?
-               0 : thd->killed_errno()) : thd_arg->net.last_errno),
    thread_id(thd_arg->thread_id),
    /* save the original thread id; we already know the server id */
    slave_proxy_id(thd_arg->variables.pseudo_thread_id),
@@ -1304,6 +1315,14 @@ Query_log_event::Query_log_event(THD* thd_arg, const char* query_arg,
    charset_database_number(0)
 {
   time_t end_time;
+
+  if (killed_status_arg == THD::KILLED_NO_VALUE)
+    killed_status_arg= thd_arg->killed;
+  error_code=
+    (killed_status_arg == THD::NOT_KILLED) ? thd_arg->net.last_errno :
+    ((thd_arg->system_thread & SYSTEM_THREAD_DELAYED_INSERT) ? 0 :
+     thd->killed_errno());
+  
   time(&end_time);
   exec_time = (ulong) (end_time  - thd->start_time);
   catalog_len = (catalog) ? (uint32) strlen(catalog) : 0;

sql/log_event.h

@@ -804,7 +804,8 @@ class Query_log_event: public Log_event
 #ifndef MYSQL_CLIENT
 
   Query_log_event(THD* thd_arg, const char* query_arg, ulong query_length,
-		  bool using_trans, bool suppress_use);
+                  bool using_trans, bool suppress_use,
+                  THD::killed_state killed_err_arg= THD::KILLED_NO_VALUE);
   const char* get_db() { return db; }
 #ifdef HAVE_REPLICATION
   void pack_info(Protocol* protocol);

sql/sql_class.h

@@ -1397,7 +1397,14 @@ class THD :public Statement,
   DYNAMIC_ARRAY user_var_events;        /* For user variables replication */
   MEM_ROOT      *user_var_events_alloc; /* Allocate above array elements here */
 
-  enum killed_state { NOT_KILLED=0, KILL_BAD_DATA=1, KILL_CONNECTION=ER_SERVER_SHUTDOWN, KILL_QUERY=ER_QUERY_INTERRUPTED };
+  enum killed_state
+  {
+    NOT_KILLED=0,
+    KILL_BAD_DATA=1,
+    KILL_CONNECTION=ER_SERVER_SHUTDOWN,
+    KILL_QUERY=ER_QUERY_INTERRUPTED,
+    KILLED_NO_VALUE      /* means neither of the states */
+  };
   killed_state volatile killed;
 
   /* scramble - random string sent to client on handshake */
@@ -1670,7 +1677,8 @@ class THD :public Statement,
   void end_statement();
   inline int killed_errno() const
   {
-    return killed != KILL_BAD_DATA ? killed : 0;
+    killed_state killed_val; /* to cache the volatile 'killed' */
+    return (killed_val= killed) != KILL_BAD_DATA ? killed_val : 0;
   }
   inline void send_kill_message() const
   {

sql/sql_insert.cc

@@ -870,9 +870,35 @@ bool mysql_insert(THD *thd,TABLE_LIST *table_list,
         if (mysql_bin_log.is_open())
         {
           if (error <= 0)
+          {
+            /*
+              [Guilhem wrote] Temporary errors may have filled
+              thd->net.last_error/errno.  For example if there has
+              been a disk full error when writing the row, and it was
+              MyISAM, then thd->net.last_error/errno will be set to
+              "disk full"... and the my_pwrite() will wait until free
+              space appears, and so when it finishes then the
+              write_row() was entirely successful
+            */
+            /* todo: consider removing */
             thd->clear_error();
+          }
+          /* bug#22725: 
+               
+          A query which per-row-loop can not be interrupted with
+          KILLED, like INSERT, and that does not invoke stored
+          routines can be binlogged with neglecting the KILLED error.
+          
+          If there was no error (error == zero) until after the end of
+          inserting loop the KILLED flag that appeared later can be
+          disregarded since previously possible invocation of stored
+          routines did not result in any error due to the KILLED.  In
+          such case the flag is ignored for constructing binlog event.
+          */
           Query_log_event qinfo(thd, thd->query, thd->query_length,
-                                transactional_table, FALSE);
+                                transactional_table, FALSE,
+                                (error>0) ? thd->killed : THD::NOT_KILLED);
+          assert(thd->killed != THD::KILL_BAD_DATA || error > 0);
           if (mysql_bin_log.write(&qinfo) && transactional_table)
             error=1;
         }

sql/sql_update.cc

@@ -521,6 +521,37 @@ int mysql_update(THD *thd,
       table->file->unlock_row();
     thd->row_count++;
   }
+
+  /*
+    todo bug#27571: to avoid asynchronization of `error' and
+    `error_code' of binlog event constructor
+
+    The concept, which is a bit different for insert(!), is to
+    replace `error' assignment with the following lines
+
+       killed_status= thd->killed; // get the status of the volatile 
+    
+    Notice: thd->killed is type of "state" whereas the lhs has
+    "status" the suffix which translates according to WordNet: a state
+    at a particular time - at the time of the end of per-row loop in
+    our case. Binlogging ops are conducted with the status.
+
+       error= (killed_status == THD::NOT_KILLED)?  error : 1;
+    
+    which applies to most mysql_$query functions.
+    Event's constructor will accept `killed_status' as an argument:
+    
+       Query_log_event qinfo(..., killed_status);
+    
+    thd->killed might be changed after killed_status had got cached and this
+    won't affect binlogging event but other effects remain.
+
+    Open issue: In a case the error happened not because of KILLED -
+    and then KILLED was caught later still within the loop - we shall
+    do something to avoid binlogging of incorrect ER_SERVER_SHUTDOWN
+    error_code.
+  */
+
   if (thd->killed && !error)
     error= 1;					// Aborted
   end_read_record(&info);