Move debug dependent MDEV-32441 test in separate file

mysql-test/main/status2.result

@@ -83,122 +83,3 @@ variable_value < 1024*1024*1024
 #
 # End of 10.2 tests
 #
-#
-# MDEV-32441 SENT_ROWS shows random wrong values when stored function
-# is selected
-#
-create table t1 (a int) engine=aria;
-insert into t1 values (1),(2),(3),(4),(5),(6),(7);
-flush status;
-create function if not exists f() returns int return
-(
-select sum(a) > 0 from t1
-);
-select f() from seq_1_to_10 where seq%5 = 0;
-f()
-1
-1
-show status like "rows_sent";
-Variable_name	Value
-Rows_sent	2
-# Test simple query
-set debug_sync='RESET';
-connect con1,localhost,root,,;
-set debug_sync='end_of_statement SIGNAL parked WAIT_FOR go';
-select f() from seq_1_to_10 where seq%5 = 0;
-connection default;
-set debug_sync='now WAIT_FOR parked';
-# Result should be 2, 10+7*2=24
-select sent_rows, examined_rows from information_schema.processlist where id=#;
-sent_rows	examined_rows
-2	24
-set debug_sync='now signal go';
-connection con1;
-f()
-1
-1
-# Test union
-set debug_sync='end_of_statement SIGNAL parked WAIT_FOR go';
-select a from t1 where a not in (1,2,3,4) union select a from t1 where a not in (4,5,6,7);
-connection default;
-set debug_sync='now WAIT_FOR parked';
-# Result should be 6, 7+7+6=20 (2 scans of 7 rows + 6 rows in union)
-select sent_rows, examined_rows from information_schema.processlist where id=#;
-sent_rows	examined_rows
-6	20
-set debug_sync='now signal go';
-connection con1;
-a
-5
-6
-7
-1
-2
-3
-# Test handler calls
-handler t1 open;
-set debug_sync='end_of_statement SIGNAL parked WAIT_FOR go';
-handler t1 read NEXT LIMIT 2,4;
-connection default;
-set debug_sync='now WAIT_FOR parked';
-# Result should be 2, 10+7*2=24
-select sent_rows, examined_rows from information_schema.processlist where id=#;
-sent_rows	examined_rows
-4	6
-set debug_sync='now signal go';
-connection con1;
-a
-3
-4
-5
-6
-handler t1 close;
-connection default;
-drop function f;
-drop table t1;
-# Test Stored procedures
-create or replace table t (a int primary key);
-insert into t select seq from seq_1_to_100;
-create procedure pr()
-begin
-select * from t where a between 1 and 2 ;
-select * from t where a between 4 and 6 ;
-end $
-connection con1;
-flush status;
-set debug_sync='end_of_statement SIGNAL parked WAIT_FOR go EXECUTE 2';
-call pr();
-connection default;
-set debug_sync='now WAIT_FOR parked';
-select examined_rows, sent_rows, info from information_schema.processlist where id=#;
-examined_rows	sent_rows	info
-2	2	select * from t where a between 1 and 2
-set debug_sync='now signal go';
-set debug_sync='now WAIT_FOR parked';
-select examined_rows, sent_rows, info from information_schema.processlist where id=#;
-examined_rows	sent_rows	info
-3	3	select * from t where a between 4 and 6
-set debug_sync='now signal go';
-connection con1;
-a
-1
-2
-a
-4
-5
-6
-show status like '%rows%';
-Variable_name	Value
-Not_flushed_delayed_rows	0
-Rows_read	8
-Rows_sent	5
-Rows_tmp_read	0
-Sort_rows	0
-connection default;
-drop table t;
-drop procedure pr;
-disconnect con1;
-set debug_sync= RESET;
-#
-# End of 11.3 tests
-#

mysql-test/main/status2.test

 --source include/not_embedded.inc
---source include/have_sequence.inc
---source include/have_debug_sync.inc
---source include/have_sequence.inc
 
 --echo #
 --echo # Bug#24289 Status Variable "Questions" gets wrong values with Stored Routines
@@ -79,114 +76,3 @@ select variable_value < 1024*1024*1024 from information_schema.global_status whe
 --echo #
 --echo # End of 10.2 tests
 --echo #
-
---echo #
---echo # MDEV-32441 SENT_ROWS shows random wrong values when stored function
---echo # is selected
---echo #
-
-create table t1 (a int) engine=aria;
-insert into t1 values (1),(2),(3),(4),(5),(6),(7);
-flush status;
-create function if not exists f() returns int return
-(
-  select sum(a) > 0 from t1
-);
-
---disable_ps_protocol
-select f() from seq_1_to_10 where seq%5 = 0;
-show status like "rows_sent";
---enable_ps_protocol
-
---echo # Test simple query
-
-set debug_sync='RESET';
---connect(con1,localhost,root,,)
---let $conid= `select connection_id()`
---let $replace_conid=id=$conid
-set debug_sync='end_of_statement SIGNAL parked WAIT_FOR go';
---send select f() from seq_1_to_10 where seq%5 = 0
-
---connection default
-set debug_sync='now WAIT_FOR parked';
---echo # Result should be 2, 10+7*2=24
---replace_result $replace_conid id=#
-eval select sent_rows, examined_rows from information_schema.processlist where id=$conid;
-set debug_sync='now signal go';
---connection con1
---reap
-
---echo # Test union
-
-set debug_sync='end_of_statement SIGNAL parked WAIT_FOR go';
---send select a from t1 where a not in (1,2,3,4) union select a from t1 where a not in (4,5,6,7)
---connection default
-set debug_sync='now WAIT_FOR parked';
---echo # Result should be 6, 7+7+6=20 (2 scans of 7 rows + 6 rows in union)
---replace_result $replace_conid id=#
-eval select sent_rows, examined_rows from information_schema.processlist where id=$conid;
-set debug_sync='now signal go';
---connection con1
---reap
-
---echo # Test handler calls
-handler t1 open;
-set debug_sync='end_of_statement SIGNAL parked WAIT_FOR go';
---send handler t1 read NEXT LIMIT 2,4
---connection default
-set debug_sync='now WAIT_FOR parked';
---echo # Result should be 2, 10+7*2=24
---replace_result $replace_conid id=#
-eval select sent_rows, examined_rows from information_schema.processlist where id=$conid;
-set debug_sync='now signal go';
---connection con1
---reap
-handler t1 close;
-
---connection default
-drop function f;
-drop table t1;
-
---echo # Test Stored procedures
-
-create or replace table t (a int primary key);
-insert into t select seq from seq_1_to_100;
---delimiter $
-create procedure pr()
-begin
-  select * from t where a between 1 and 2 ;
-  select * from t where a between 4 and 6 ;
-end $
---delimiter ;
-
---connection con1
-flush status;
-set debug_sync='end_of_statement SIGNAL parked WAIT_FOR go EXECUTE 2';
-
---send  call pr()
-
---connection default
-set debug_sync='now WAIT_FOR parked';
---replace_result $replace_conid id=#
-eval select examined_rows, sent_rows, info from information_schema.processlist where id=$conid;
-set debug_sync='now signal go';
-set debug_sync='now WAIT_FOR parked';
---replace_result $replace_conid id=#
-eval select examined_rows, sent_rows, info from information_schema.processlist where id=$conid;
-set debug_sync='now signal go';
-
---connection con1
---reap
-show status like '%rows%';
-
-connection default;
-# Cleanup
-drop table t;
-drop procedure pr;
-
---disconnect con1
-set debug_sync= RESET;
-
---echo #
---echo # End of 11.3 tests
---echo #

mysql-test/main/status_debug.result

+#
+# MDEV-32441 SENT_ROWS shows random wrong values when stored function
+# is selected
+#
+create table t1 (a int) engine=aria;
+insert into t1 values (1),(2),(3),(4),(5),(6),(7);
+flush status;
+create function if not exists f() returns int return
+(
+select sum(a) > 0 from t1
+);
+select f() from seq_1_to_10 where seq%5 = 0;
+f()
+1
+1
+show status like "rows_sent";
+Variable_name	Value
+Rows_sent	2
+# Test simple query
+set debug_sync='RESET';
+connect con1,localhost,root,,;
+set debug_sync='end_of_statement SIGNAL parked WAIT_FOR go';
+select f() from seq_1_to_10 where seq%5 = 0;
+connection default;
+set debug_sync='now WAIT_FOR parked';
+# Result should be 2, 10+7*2=24
+select sent_rows, examined_rows from information_schema.processlist where id=#;
+sent_rows	examined_rows
+2	24
+set debug_sync='now signal go';
+connection con1;
+f()
+1
+1
+# Test union
+set debug_sync='end_of_statement SIGNAL parked WAIT_FOR go';
+select a from t1 where a not in (1,2,3,4) union select a from t1 where a not in (4,5,6,7);
+connection default;
+set debug_sync='now WAIT_FOR parked';
+# Result should be 6, 7+7+6=20 (2 scans of 7 rows + 6 rows in union)
+select sent_rows, examined_rows from information_schema.processlist where id=#;
+sent_rows	examined_rows
+6	20
+set debug_sync='now signal go';
+connection con1;
+a
+5
+6
+7
+1
+2
+3
+# Test handler calls
+handler t1 open;
+set debug_sync='end_of_statement SIGNAL parked WAIT_FOR go';
+handler t1 read NEXT LIMIT 2,4;
+connection default;
+set debug_sync='now WAIT_FOR parked';
+# Result should be 2, 10+7*2=24
+select sent_rows, examined_rows from information_schema.processlist where id=#;
+sent_rows	examined_rows
+4	6
+set debug_sync='now signal go';
+connection con1;
+a
+3
+4
+5
+6
+handler t1 close;
+connection default;
+drop function f;
+drop table t1;
+# Test Stored procedures
+create or replace table t (a int primary key);
+insert into t select seq from seq_1_to_100;
+create procedure pr()
+begin
+select * from t where a between 1 and 2 ;
+select * from t where a between 4 and 6 ;
+end $
+connection con1;
+flush status;
+set debug_sync='end_of_statement SIGNAL parked WAIT_FOR go EXECUTE 2';
+call pr();
+connection default;
+set debug_sync='now WAIT_FOR parked';
+select examined_rows, sent_rows, info from information_schema.processlist where id=#;
+examined_rows	sent_rows	info
+2	2	select * from t where a between 1 and 2
+set debug_sync='now signal go';
+set debug_sync='now WAIT_FOR parked';
+select examined_rows, sent_rows, info from information_schema.processlist where id=#;
+examined_rows	sent_rows	info
+3	3	select * from t where a between 4 and 6
+set debug_sync='now signal go';
+connection con1;
+a
+1
+2
+a
+4
+5
+6
+show status like '%rows%';
+Variable_name	Value
+Not_flushed_delayed_rows	0
+Rows_read	8
+Rows_sent	5
+Rows_tmp_read	0
+Sort_rows	0
+connection default;
+drop table t;
+drop procedure pr;
+disconnect con1;
+set debug_sync= RESET;
+#
+# End of 11.3 tests
+#

mysql-test/main/status_debug.test

+--source include/not_embedded.inc
+--source include/have_debug_sync.inc
+--source include/have_sequence.inc
+
+
+--echo #
+--echo # MDEV-32441 SENT_ROWS shows random wrong values when stored function
+--echo # is selected
+--echo #
+
+create table t1 (a int) engine=aria;
+insert into t1 values (1),(2),(3),(4),(5),(6),(7);
+flush status;
+create function if not exists f() returns int return
+(
+  select sum(a) > 0 from t1
+);
+
+--disable_ps_protocol
+select f() from seq_1_to_10 where seq%5 = 0;
+show status like "rows_sent";
+--enable_ps_protocol
+
+--echo # Test simple query
+
+set debug_sync='RESET';
+--connect(con1,localhost,root,,)
+--let $conid= `select connection_id()`
+--let $replace_conid=id=$conid
+set debug_sync='end_of_statement SIGNAL parked WAIT_FOR go';
+--send select f() from seq_1_to_10 where seq%5 = 0
+
+--connection default
+set debug_sync='now WAIT_FOR parked';
+--echo # Result should be 2, 10+7*2=24
+--replace_result $replace_conid id=#
+eval select sent_rows, examined_rows from information_schema.processlist where id=$conid;
+set debug_sync='now signal go';
+--connection con1
+--reap
+
+--echo # Test union
+
+set debug_sync='end_of_statement SIGNAL parked WAIT_FOR go';
+--send select a from t1 where a not in (1,2,3,4) union select a from t1 where a not in (4,5,6,7)
+--connection default
+set debug_sync='now WAIT_FOR parked';
+--echo # Result should be 6, 7+7+6=20 (2 scans of 7 rows + 6 rows in union)
+--replace_result $replace_conid id=#
+eval select sent_rows, examined_rows from information_schema.processlist where id=$conid;
+set debug_sync='now signal go';
+--connection con1
+--reap
+
+--echo # Test handler calls
+handler t1 open;
+set debug_sync='end_of_statement SIGNAL parked WAIT_FOR go';
+--send handler t1 read NEXT LIMIT 2,4
+--connection default
+set debug_sync='now WAIT_FOR parked';
+--echo # Result should be 2, 10+7*2=24
+--replace_result $replace_conid id=#
+eval select sent_rows, examined_rows from information_schema.processlist where id=$conid;
+set debug_sync='now signal go';
+--connection con1
+--reap
+handler t1 close;
+
+--connection default
+drop function f;
+drop table t1;
+
+--echo # Test Stored procedures
+
+create or replace table t (a int primary key);
+insert into t select seq from seq_1_to_100;
+--delimiter $
+create procedure pr()
+begin
+  select * from t where a between 1 and 2 ;
+  select * from t where a between 4 and 6 ;
+end $
+--delimiter ;
+
+--connection con1
+flush status;
+set debug_sync='end_of_statement SIGNAL parked WAIT_FOR go EXECUTE 2';
+
+--send  call pr()
+
+--connection default
+set debug_sync='now WAIT_FOR parked';
+--replace_result $replace_conid id=#
+eval select examined_rows, sent_rows, info from information_schema.processlist where id=$conid;
+set debug_sync='now signal go';
+set debug_sync='now WAIT_FOR parked';
+--replace_result $replace_conid id=#
+eval select examined_rows, sent_rows, info from information_schema.processlist where id=$conid;
+set debug_sync='now signal go';
+
+--connection con1
+--reap
+show status like '%rows%';
+
+connection default;
+# Cleanup
+drop table t;
+drop procedure pr;
+
+--disconnect con1
+set debug_sync= RESET;
+
+--echo #
+--echo # End of 11.3 tests
+--echo #