Reviewed fix for bug#40882: Replaced "sleep 1" by wait_condition, added...

Reviewed fix for bug#40882: Replaced "sleep 1" by wait_condition, added save/restore start values and closed open sessions. When trying to use "wait_for_query_to_succeed" a type has been fixed, also in "rename.test": Added session count and check and replaced error numbers.

mysql-test/include/wait_for_query_to_suceed.inc → mysql-test/include/wait_for_query_to_succeed.inc

 #
-# Run a query over and over until it suceeds ot timeout occurs
+# Run a query over and over until it succeeds ot timeout occurs
 #
 
 
@@ -17,7 +17,7 @@ while ($mysql_errno)
 
   if (!$counter)
   {
-    die("Waited too long for query to suceed");
+    --die "Waited too long for query to succeed";
   }
 }
 enable_abort_on_error;

mysql-test/r/read_only.result

+set @start_read_only= @@global.read_only;
 DROP TABLE IF EXISTS t1,t2,t3;
 grant CREATE, SELECT, DROP on *.* to test@localhost;
+connect (con1,localhost,test,,test);
+connection default;
 set global read_only=0;
+connection con1;
 create table t1 (a int);
 insert into t1 values(1);
 create table t2 select * from t1;
+connection default;
 set global read_only=1;
 create table t3 (a int);
 drop table t3;
+connection con1;
 select @@global.read_only;
 @@global.read_only
 1
@@ -39,13 +45,18 @@ delete t1 from t1,t3 where t1.a=t3.a;
 drop table t1;
 insert into t1 values(1);
 ERROR HY000: The MySQL server is running with the --read-only option so it cannot execute this statement
+connection default;
 set global read_only=0;
 lock table t1 write;
+connection con1;
 lock table t2 write;
+connection default;
 set global read_only=1;
 ERROR HY000: Can't execute the given command because you have active locked tables or an active transaction
 unlock tables ;
+send set global read_only=1;
 set global read_only=1;
+connection con1;
 select @@global.read_only;
 @@global.read_only
 0
@@ -53,13 +64,20 @@ unlock tables ;
 select @@global.read_only;
 @@global.read_only
 1
+connection default;
+reap;
+connection default;
 set global read_only=0;
 lock table t1 read;
+connection con1;
 lock table t2 read;
+connection default;
 set global read_only=1;
 ERROR HY000: Can't execute the given command because you have active locked tables or an active transaction
 unlock tables ;
+send set global read_only=1;
 set global read_only=1;
+connection con1;
 select @@global.read_only;
 @@global.read_only
 0
@@ -67,24 +85,35 @@ unlock tables ;
 select @@global.read_only;
 @@global.read_only
 1
+connection default;
+reap;
+connection default;
 set global read_only=0;
 BEGIN;
+connection con1;
 BEGIN;
+connection default;
 set global read_only=1;
 ERROR HY000: Can't execute the given command because you have active locked tables or an active transaction
 ROLLBACK;
 set global read_only=1;
+connection con1;
 select @@global.read_only;
 @@global.read_only
 1
 ROLLBACK;
+connection default;
 set global read_only=0;
 flush tables with read lock;
 set global read_only=1;
 unlock tables;
+connect (root2,localhost,root,,test);
+connection default;
 set global read_only=0;
 flush tables with read lock;
+connection root2;
 set global read_only=1;
+connection default;
 select @@global.read_only;
 @@global.read_only
 1
@@ -94,6 +123,7 @@ ERROR 42S02: Unknown table 'ttt'
 drop temporary table if exists ttt;
 Warnings:
 Note	1051	Unknown table 'ttt'
+connection default;
 set global read_only=0;
 drop table t1,t2;
 drop user test@localhost;
@@ -112,16 +142,20 @@ grant all on mysqltest_db2.* to `mysqltest_u1`@`%`;
 create database mysqltest_db1;
 grant all on mysqltest_db1.* to `mysqltest_u1`@`%`;
 flush privileges;
+connect (con_bug27440,127.0.0.1,mysqltest_u1,,test,MASTER_MYPORT,);
+connection con_bug27440;
 create database mysqltest_db2;
 ERROR HY000: The MySQL server is running with the --read-only option so it cannot execute this statement
 show databases like '%mysqltest_db2%';
 Database (%mysqltest_db2%)
 drop database mysqltest_db1;
 ERROR HY000: The MySQL server is running with the --read-only option so it cannot execute this statement
+disconnect con_bug27440;
+connection default;
 delete from mysql.user where User like 'mysqltest_%';
 delete from mysql.db where User like 'mysqltest_%';
 delete from mysql.tables_priv where User like 'mysqltest_%';
 delete from mysql.columns_priv where User like 'mysqltest_%';
 flush privileges;
 drop database mysqltest_db1;
-set global read_only=0;
+set global read_only= @start_read_only;

mysql-test/t/read_only.test

@@ -2,7 +2,10 @@
 # check that it blocks updates unless they are only on temporary tables.
 
 # should work with embedded server after mysqltest is fixed
--- source include/not_embedded.inc
+--source include/not_embedded.inc
+--source include/count_sessions.inc
+
+set @start_read_only= @@global.read_only;
 
 --disable_warnings
 DROP TABLE IF EXISTS t1,t2,t3;
@@ -13,12 +16,15 @@ DROP TABLE IF EXISTS t1,t2,t3;
 
 grant CREATE, SELECT, DROP on *.* to test@localhost;
 
+--echo connect (con1,localhost,test,,test);
 connect (con1,localhost,test,,test);
 
+--echo connection default;
 connection default;
 
 set global read_only=0;
 
+--echo connection con1;
 connection con1;
 
 create table t1 (a int);
@@ -27,6 +33,7 @@ insert into t1 values(1);
 
 create table t2 select * from t1;
 
+--echo connection default;
 connection default;
 
 set global read_only=1;
@@ -36,28 +43,29 @@ set global read_only=1;
 create table t3 (a int);
 drop table t3;
 
+--echo connection con1;
 connection con1;
 
 select @@global.read_only;
 
---error 1290
+--error ER_OPTION_PREVENTS_STATEMENT
 create table t3 (a int);
 
---error 1290
+--error ER_OPTION_PREVENTS_STATEMENT
 insert into t1 values(1);
 
 # if a statement, after parse stage, looks like it will update a
 # non-temp table, it will be rejected, even if at execution it would
 # have turned out that 0 rows would be updated
---error 1290
+--error ER_OPTION_PREVENTS_STATEMENT
 update t1 set a=1 where 1=0;
 
 # multi-update is special (see sql_parse.cc) so we test it
---error 1290
+--error ER_OPTION_PREVENTS_STATEMENT
 update t1,t2 set t1.a=t2.a+1 where t1.a=t2.a;
 
 # check multi-delete to be sure
---error 1290
+--error ER_OPTION_PREVENTS_STATEMENT
 delete t1,t2 from t1,t2 where t1.a=t2.a;
 
 # With temp tables updates should be accepted:
@@ -71,7 +79,7 @@ insert into t3 values(1);
 insert into t4 select * from t3;
 
 # a non-temp table updated:
---error 1290
+--error ER_OPTION_PREVENTS_STATEMENT
 update t1,t3 set t1.a=t3.a+1 where t1.a=t3.a;
 
 # no non-temp table updated (just swapped):
@@ -79,7 +87,7 @@ update t1,t3 set t3.a=t1.a+1 where t1.a=t3.a;
 
 update t4,t3 set t4.a=t3.a+1 where t4.a=t3.a;
 
---error 1290
+--error ER_OPTION_PREVENTS_STATEMENT
 delete t1 from t1,t3 where t1.a=t3.a;
 
 delete t3 from t1,t3 where t1.a=t3.a;
@@ -98,7 +106,7 @@ delete t1 from t1,t3 where t1.a=t3.a;
 
 drop table t1;
 
---error 1290
+--error ER_OPTION_PREVENTS_STATEMENT
 insert into t1 values(1);
 
 #
@@ -109,77 +117,96 @@ insert into t1 values(1);
 # - is an error in the same connection
 # - is ok in a different connection
 
+--echo connection default;
 connection default;
 set global read_only=0;
 lock table t1 write;
 
+--echo connection con1;
 connection con1;
 lock table t2 write;
 
+--echo connection default;
 connection default;
 --error ER_LOCK_OR_ACTIVE_TRANSACTION
 set global read_only=1;
 unlock tables ;
 # The following call blocks until con1 releases the write lock.
 # Blocking is expected.
+--echo send set global read_only=1;
 send set global read_only=1;
 
+--echo connection con1;
 connection con1;
---sleep 1
 select @@global.read_only;
 unlock tables ;
---sleep 1
+let $wait_condition= SELECT @@global.read_only= 1;
+--source include/wait_condition.inc
 select @@global.read_only;
 
+--echo connection default;
 connection default;
+--echo reap;
 reap;
 
 # LOCK TABLE ... READ / READ_ONLY
 # - is an error in the same connection
 # - is ok in a different connection
 
+--echo connection default;
 connection default;
 set global read_only=0;
 lock table t1 read;
 
+--echo connection con1;
 connection con1;
 lock table t2 read;
 
+--echo connection default;
 connection default;
 --error ER_LOCK_OR_ACTIVE_TRANSACTION
 set global read_only=1;
 unlock tables ;
 # The following call blocks until con1 releases the read lock.
 # Blocking is a limitation, and could be improved.
+--echo send set global read_only=1;
 send set global read_only=1;
 
+--echo connection con1;
 connection con1;
---sleep 1
 select @@global.read_only;
 unlock tables ;
---sleep 1
+let $wait_condition= SELECT @@global.read_only= 1;
+--source include/wait_condition.inc
 select @@global.read_only;
 
+--echo connection default;
 connection default;
+--echo reap;
 reap;
 
 # pending transaction / READ_ONLY
 # - is an error in the same connection
 # - is ok in a different connection
 
+--echo connection default;
 connection default;
 set global read_only=0;
 BEGIN;
 
+--echo connection con1;
 connection con1;
 BEGIN;
 
+--echo connection default;
 connection default;
 --error ER_LOCK_OR_ACTIVE_TRANSACTION
 set global read_only=1;
 ROLLBACK;
+
 set global read_only=1;
 
+--echo connection con1;
 connection con1;
 select @@global.read_only;
 ROLLBACK;
@@ -188,21 +215,26 @@ ROLLBACK;
 # - in the same SUPER connection
 # - in another SUPER connection
 
+--echo connection default;
 connection default;
 set global read_only=0;
 flush tables with read lock;
 set global read_only=1;
 unlock tables;
 
+--echo connect (root2,localhost,root,,test);
 connect (root2,localhost,root,,test);
 
+--echo connection default;
 connection default;
 set global read_only=0;
 flush tables with read lock;
 
+--echo connection root2;
 connection root2;
 set global read_only=1;
 
+--echo connection default;
 connection default;
 select @@global.read_only;
 unlock tables;
@@ -221,6 +253,7 @@ drop temporary table if exists ttt;
 #
 # Cleanup
 #
+--echo connection default;
 connection default;
 set global read_only=0;
 drop table t1,t2;
@@ -244,14 +277,18 @@ grant all on mysqltest_db2.* to `mysqltest_u1`@`%`;
 create database mysqltest_db1;
 grant all on mysqltest_db1.* to `mysqltest_u1`@`%`;
 flush privileges;
+--echo connect (con_bug27440,127.0.0.1,mysqltest_u1,,test,MASTER_MYPORT,);
 connect (con_bug27440,127.0.0.1,mysqltest_u1,,test,$MASTER_MYPORT,);
+--echo connection con_bug27440;
 connection con_bug27440;
 --error ER_OPTION_PREVENTS_STATEMENT
 create database mysqltest_db2;
 show databases like '%mysqltest_db2%';
 --error ER_OPTION_PREVENTS_STATEMENT
 drop database mysqltest_db1;
+--echo disconnect con_bug27440;
 disconnect con_bug27440;
+--echo connection default;
 connection default;
 delete from mysql.user where User like 'mysqltest_%';
 delete from mysql.db where User like 'mysqltest_%';
@@ -259,4 +296,8 @@ delete from mysql.tables_priv where User like 'mysqltest_%';
 delete from mysql.columns_priv where User like 'mysqltest_%';
 flush privileges;
 drop database mysqltest_db1;
-set global read_only=0;
+set global read_only= @start_read_only;
+disconnect con1;
+disconnect root2;
+--source include/wait_until_count_sessions.inc
+

mysql-test/t/rename.test

@@ -2,6 +2,8 @@
 # Test of rename table
 #
 
+--source include/count_sessions.inc
+
 --disable_warnings
 drop table if exists t0,t1,t2,t3,t4;
 # Clear up from other tests (to ensure that SHOW TABLES below is right)
@@ -19,16 +21,16 @@ rename table t3 to t4, t2 to t3, t1 to t2, t4 to t1;
 select * from t1;
 
 # The following should give errors
---error 1050,1050
+--error ER_TABLE_EXISTS_ERROR,ER_TABLE_EXISTS_ERROR
 rename table t1 to t2;
---error 1050,1050
+--error ER_TABLE_EXISTS_ERROR,ER_TABLE_EXISTS_ERROR
 rename table t1 to t1;
---error 1050,1050
+--error ER_TABLE_EXISTS_ERROR,ER_TABLE_EXISTS_ERROR
 rename table t3 to t4, t2 to t3, t1 to t2, t4 to t2;
 show tables like "t_";
---error 1050,1050
+--error ER_TABLE_EXISTS_ERROR,ER_TABLE_EXISTS_ERROR
 rename table t3 to t1, t2 to t3, t1 to t2, t4 to t1;
---error 1017,1017
+--error ER_FILE_NOT_FOUND,ER_FILE_NOT_FOUND
 rename table t3 to t4, t5 to t3, t1 to t2, t4 to t1;
 
 select * from t1;
@@ -63,7 +65,7 @@ connection con2;
 # Wait for the the tables to be renamed
 # i.e the query below succeds
 let $query= select * from t2, t4;
-source include/wait_for_query_to_suceed.inc;
+source include/wait_for_query_to_succeed.inc;
 
 show tables;
 
@@ -83,13 +85,15 @@ connection default;
 create table t1(f1 int);
 create view v1 as select * from t1;
 alter table v1 rename to v2;
---error 1146
+--error ER_NO_SUCH_TABLE
 alter table v1 rename to v2;
 rename table v2 to v1;
---error 1050
+--error ER_TABLE_EXISTS_ERROR
 rename table v2 to v1;
 drop view v1;
 drop table t1;
 
-
 --echo End of 5.0 tests
+
+--source include/wait_until_count_sessions.inc
+