MDEV-17958: Make innochecksum follow the build option

Innochecksum was being built as if WITH_INNODB_BUG_ENDIAN_CRC32:BOOL=OFF
had been specified.

Also, clean up tests:

innodb.innochecksum: Useless; superceded by innodb_zip.innochecksum.
innodb.innodb_zip_innochecksum: Remove; duplicated innodb_zip.innochecksum.
innodb.innodb_zip_innochecksum2: Remove; duplicated innodb_zip.innochecksum_2.
innodb.innodb_zip_innochecksum3: Remove; duplicated innodb_zip.innochecksum_3.

No test case was added. I tested manually by adding debug instrumentation
to both innochecksum and buf_page_is_checksum_valid_crc32() to make
innochecksum write the buggy crc32, and to get warnings for falling back
to the buggy checksum. Automating this would require that tests be
adjusted depending on the build options.

extra/CMakeLists.txt

@@ -72,6 +72,9 @@ IF(WITH_INNOBASE_STORAGE_ENGINE OR WITH_XTRADB_STORAGE_ENGINE)
 
   # We use the InnoDB code directly in case the code changes.
   ADD_DEFINITIONS("-DUNIV_INNOCHECKSUM")
+  IF(WITH_INNODB_BUG_ENDIAN_CRC32)
+    ADD_DEFINITIONS(-DINNODB_BUG_ENDIAN_CRC32)
+  ENDIF()
 
   # Avoid generating Hardware Capabilities due to crc32 instructions
   IF(CMAKE_SYSTEM_NAME MATCHES "SunOS" AND CMAKE_SYSTEM_PROCESSOR MATCHES "i386")

mysql-test/suite/innodb/r/innochecksum.result

-CREATE TABLE t1 (a INT AUTO_INCREMENT PRIMARY KEY, b TEXT) ENGINE=InnoDB;
-INSERT INTO t1 (b) VALUES ('corrupt me');
-INSERT INTO t1 (b) VALUES ('corrupt me');
-# Run innochecksum on t1
-DROP TABLE t1;

mysql-test/suite/innodb/r/innodb_zip_innochecksum.result

-# Set the environmental variables
-call mtr.add_suppression("InnoDB: Unable to read tablespace .* page no .* into the buffer pool after 100 attempts");
-call mtr.add_suppression("InnoDB: Warning: database page corruption or a failed");
-CREATE TABLE tab1(c1 INT PRIMARY KEY,c2 VARCHAR(20)) ENGINE=InnoDB;
-CREATE INDEX idx1 ON tab1(c2(10));
-INSERT INTO tab1 VALUES(1, 'Innochecksum InnoDB1');
-CREATE TABLE t1(id INT AUTO_INCREMENT PRIMARY KEY, msg VARCHAR(255)) ENGINE=INNODB ROW_FORMAT=COMPRESSED KEY_BLOCK_SIZE=4;
-insert into t1 values(1,"i");
-insert into t1 values(2,"am");
-insert into t1 values(3,"compressed table");
-# Shutdown the Server
-# Server Default checksum = innodb
-[1b]: check the innochecksum without --strict-check
-[2]: check the innochecksum with full form --strict-check=crc32
-[3]: check the innochecksum with short form -C crc32
-[4]: check the innochecksum with --no-check ignores algorithm check, warning is expected
-FOUND 1 /Error: --no-check must be associated with --write option./ in my_restart.err
-[5]: check the innochecksum with short form --no-check ignores algorithm check, warning is expected
-FOUND 1 /Error: --no-check must be associated with --write option./ in my_restart.err
-[6]: check the innochecksum with full form strict-check & no-check , an error is expected
-FOUND 1 /Error: --strict-check option cannot be used together with --no-check option./ in my_restart.err
-[7]: check the innochecksum with short form strict-check & no-check , an error is expected
-FOUND 1 /Error: --strict-check option cannot be used together with --no-check option./ in my_restart.err
-[8]: check the innochecksum with short & full form combination
-# strict-check & no-check, an error is expected
-FOUND 1 /Error: --strict-check option cannot be used together with --no-check option./ in my_restart.err
-[9]: check the innochecksum with full form --strict-check=innodb
-[10]: check the innochecksum with full form --strict-check=none
-# when server Default checksum=crc32
-[11]: check the innochecksum with short form -C innodb
-# when server Default checksum=crc32
-[12]: check the innochecksum with short form -C none
-# when server Default checksum=crc32
-[13]: check strict-check with invalid values
-FOUND 1 /Error while setting value \'strict_innodb\' to \'strict-check\'/ in my_restart.err
-FOUND 1 /Error while setting value \'strict_innodb\' to \'strict-check\'/ in my_restart.err
-FOUND 1 /Error while setting value \'strict_crc32\' to \'strict-check\'/ in my_restart.err
-FOUND 1 /Error while setting value \'strict_crc32\' to \'strict-check\'/ in my_restart.err
-FOUND 1 /Error while setting value \'strict_none\' to \'strict-check\'/ in my_restart.err
-FOUND 1 /Error while setting value \'strict_none\' to \'strict-check\'/ in my_restart.err
-FOUND 1 /Error while setting value \'InnoBD\' to \'strict-check\'/ in my_restart.err
-FOUND 1 /Error while setting value \'InnoBD\' to \'strict-check\'/ in my_restart.err
-FOUND 1 /Error while setting value \'crc\' to \'strict-check\'/ in my_restart.err
-FOUND 1 /Error while setting value \'no\' to \'strict-check\'/ in my_restart.err
-[14a]: when server default checksum=crc32 rewrite new checksum=crc32 with innochecksum
-# Also check the long form of write option.
-[14b]: when server default checksum=crc32 rewrite new checksum=innodb with innochecksum
-# Also check the long form of write option.
-# start the server with innodb_checksum_algorithm=InnoDB
-INSERT INTO tab1 VALUES(2, 'Innochecksum CRC32');
-SELECT c1,c2 FROM tab1 order by c1,c2;
-c1	c2
-1	Innochecksum InnoDB1
-2	Innochecksum CRC32
-# Stop the server
-[15]: when server default checksum=crc32 rewrite new checksum=none with innochecksum
-# Also check the short form of write option.
-# Start the server with checksum algorithm=none
-INSERT INTO tab1 VALUES(3, 'Innochecksum None');
-SELECT c1,c2 FROM tab1 order by c1,c2;
-c1	c2
-1	Innochecksum InnoDB1
-2	Innochecksum CRC32
-3	Innochecksum None
-DROP TABLE t1;
-# Stop the server
-[16]: rewrite into new checksum=crc32 with innochecksum
-# Restart the DB server with  innodb_checksum_algorithm=crc32
-SELECT * FROM tab1;
-c1	c2
-1	Innochecksum InnoDB1
-2	Innochecksum CRC32
-3	Innochecksum None
-DELETE FROM tab1 where c1=3;
-SELECT c1,c2 FROM tab1 order by c1,c2;
-c1	c2
-1	Innochecksum InnoDB1
-2	Innochecksum CRC32
-# Stop server
-[17]: rewrite into new checksum=InnoDB
-# Restart the DB server with innodb_checksum_algorithm=InnoDB
-DELETE FROM tab1 where c1=2;
-SELECT * FROM tab1;
-c1	c2
-1	Innochecksum InnoDB1
-# Stop server
-[18]:check Innochecksum with invalid write options
-FOUND 1 /Error while setting value \'strict_crc32\' to \'write\'/ in my_restart.err
-FOUND 1 /Error while setting value \'strict_innodb\' to \'write\'/ in my_restart.err
-FOUND 1 /Error while setting value \'crc23\' to \'write\'/ in my_restart.err
-DROP TABLE tab1;

mysql-test/suite/innodb/r/innodb_zip_innochecksum2.result

-SET GLOBAL innodb_compression_level=0;
-SELECT @@innodb_compression_level;
-@@innodb_compression_level
-0
-CREATE TABLE t1 (j LONGBLOB) ENGINE = InnoDB ROW_FORMAT=COMPRESSED KEY_BLOCK_SIZE=1;
-INSERT INTO t1 VALUES (repeat('abcdefghijklmnopqrstuvwxyz',200));
-INSERT INTO t1 SELECT * from t1;
-INSERT INTO t1 SELECT * from t1;
-INSERT INTO t1 SELECT * from t1;
-INSERT INTO t1 SELECT * from t1;
-INSERT INTO t1 SELECT * from t1;
-INSERT INTO t1 SELECT * from t1;
-INSERT INTO t1 SELECT * from t1;
-INSERT INTO t1 SELECT * from t1;
-INSERT INTO t1 SELECT * from t1;
-INSERT INTO t1 SELECT * from t1;
-# stop the server
-
-Variables (--variable-name=value)
-and boolean options {FALSE|TRUE}  Value (after reading options)
---------------------------------- ----------------------------------------
-verbose                           TRUE
-debug                             FALSE
-count                             FALSE
-start-page                        0
-end-page                          0
-page                              0
-strict-check                      crc32
-no-check                          FALSE
-allow-mismatches                  0
-write                             crc32
-page-type-summary                 FALSE
-page-type-dump                    MYSQLTEST_VARDIR/tmp/dump.txt
-per-page-details                  FALSE
-log                               (No default value)
-leaf                              FALSE
-merge                             0
-[1]:# check the both short and long options for "help"
-[2]:# Run the innochecksum when file isn't provided.
-# It will print the innochecksum usage similar to --help option.
-innochecksum Ver #.#.#
-Copyright (c) YEAR, YEAR , Oracle, MariaDB Corporation Ab and others.
-
-InnoDB offline file checksum utility.
-Usage: innochecksum [-c] [-s <start page>] [-e <end page>] [-p <page>] [-i] [-v]  [-a <allow mismatches>] [-n] [-C <strict-check>] [-w <write>] [-S] [-D <page type dump>] [-l <log>] [-l] [-m <merge pages>] <filename or [-]>
-  -?, --help          Displays this help and exits.
-  -I, --info          Synonym for --help.
-  -V, --version       Displays version information and exits.
-  -v, --verbose       Verbose (prints progress every 5 seconds).
-  -c, --count         Print the count of pages in the file and exits.
-  -s, --start-page=#  Start on this page number (0 based).
-  -e, --end-page=#    End at this page number (0 based).
-  -p, --page=#        Check only this page (0 based).
-  -C, --strict-check=name 
-                      Specify the strict checksum algorithm by the user.. One
-                      of: crc32, crc32, innodb, innodb, none, none
-  -n, --no-check      Ignore the checksum verification.
-  -a, --allow-mismatches=# 
-                      Maximum checksum mismatch allowed.
-  -w, --write=name    Rewrite the checksum algorithm by the user.. One of: 
-                      crc32, crc32, innodb, innodb, none, none
-  -S, --page-type-summary 
-                      Display a count of each page type in a tablespace.
-  -D, --page-type-dump=name 
-                      Dump the page type info for each page in a tablespace.
-  -i, --per-page-details 
-                      Print out per-page detail information.
-  -l, --log=name      log output.
-  -f, --leaf          Examine leaf index pages
-  -m, --merge=#       leaf page count if merge given number of consecutive
-                      pages
-
-Variables (--variable-name=value)
-and boolean options {FALSE|TRUE}  Value (after reading options)
---------------------------------- ----------------------------------------
-verbose                           FALSE
-count                             FALSE
-start-page                        0
-end-page                          0
-page                              0
-strict-check                      crc32
-no-check                          FALSE
-allow-mismatches                  0
-write                             crc32
-page-type-summary                 FALSE
-page-type-dump                    (No default value)
-per-page-details                  FALSE
-log                               (No default value)
-leaf                              FALSE
-merge                             0
-[3]:# check the both short and long options for "count" and exit
-Number of pages:#
-Number of pages:#
-[4]:# Print the version of innochecksum and exit
-innochecksum Ver #.#.## Restart the DB server
-DROP TABLE t1;
-[5]:# Check the innochecksum for compressed table t1 with different key_block_size
-# Test for KEY_BLOCK_SIZE=1
-===> Testing  size=1
-CREATE TABLE t1(id INT AUTO_INCREMENT PRIMARY KEY, msg VARCHAR(255)) ENGINE=INNODB ROW_FORMAT=COMPRESSED KEY_BLOCK_SIZE=1;
-insert into t1 values(1,"I");
-insert into t1 values(2,"AM");
-insert into t1 values(3,"COMPRESSED");
-select * from t1;
-id	msg
-1	I
-2	AM
-3	COMPRESSED
-drop table t1;
-# Test for KEY_BLOCK_SIZE=2
-===> Testing  size=2
-CREATE TABLE t1(id INT AUTO_INCREMENT PRIMARY KEY, msg VARCHAR(255)) ENGINE=INNODB ROW_FORMAT=COMPRESSED KEY_BLOCK_SIZE=2;
-insert into t1 values(1,"I");
-insert into t1 values(2,"AM");
-insert into t1 values(3,"COMPRESSED");
-select * from t1;
-id	msg
-1	I
-2	AM
-3	COMPRESSED
-drop table t1;
-# Test for for KEY_BLOCK_SIZE=4
-===> Testing  size=4
-CREATE TABLE t1(id INT AUTO_INCREMENT PRIMARY KEY, msg VARCHAR(255)) ENGINE=INNODB ROW_FORMAT=COMPRESSED KEY_BLOCK_SIZE=4;
-insert into t1 values(1,"I");
-insert into t1 values(2,"AM");
-insert into t1 values(3,"COMPRESSED");
-select * from t1;
-id	msg
-1	I
-2	AM
-3	COMPRESSED
-drop table t1;
-set innodb_strict_mode=off;
-# Test for for KEY_BLOCK_SIZE=8
-===> Testing  size=8
-CREATE TABLE t1(id INT AUTO_INCREMENT PRIMARY KEY, msg VARCHAR(255)) ENGINE=INNODB ROW_FORMAT=COMPRESSED KEY_BLOCK_SIZE=8;
-insert into t1 values(1,"I");
-insert into t1 values(2,"AM");
-insert into t1 values(3,"COMPRESSED");
-select * from t1;
-id	msg
-1	I
-2	AM
-3	COMPRESSED
-drop table t1;
-set innodb_strict_mode=off;
-# Test for KEY_BLOCK_SIZE=16
-===> Testing  size=16
-CREATE TABLE t1(id INT AUTO_INCREMENT PRIMARY KEY, msg VARCHAR(255)) ENGINE=INNODB ROW_FORMAT=COMPRESSED KEY_BLOCK_SIZE=16;
-insert into t1 values(1,"I");
-insert into t1 values(2,"AM");
-insert into t1 values(3,"COMPRESSED");
-select * from t1;
-id	msg
-1	I
-2	AM
-3	COMPRESSED
-drop table t1;
-# Test[5] completed

mysql-test/suite/innodb/r/innodb_zip_innochecksum3.result

-# Set the environmental variables
-call mtr.add_suppression("InnoDB: Unable to read tablespace .* page no .* into the buffer pool after 100 attempts");
-call mtr.add_suppression("InnoDB: innodb_checksum_algorithm is set to.*");
-[1]: Further Test are for rewrite checksum (innodb|crc32|none) for all ibd file & start the server.
-CREATE TABLE tab1 (pk INTEGER NOT NULL PRIMARY KEY,
-linestring_key GEOMETRY NOT NULL,
-linestring_nokey GEOMETRY NOT NULL)
-ENGINE=InnoDB ;
-INSERT INTO tab1 (pk, linestring_key, linestring_nokey)
-VALUES (1, ST_GeomFromText('POINT(10 10) '), ST_GeomFromText('POINT(10 10) '));
-CREATE INDEX linestring_index ON tab1(linestring_nokey(5));
-ALTER TABLE tab1 ADD  KEY (linestring_key(5));
-# create a compressed table
-CREATE TABLE tab2(col_1 CHAR (255) ,
-col_2 VARCHAR (255), col_3 longtext,
-col_4 longtext,col_5 longtext,
-col_6 longtext , col_7 int )
-engine = innodb row_format=compressed key_block_size=4;
-CREATE INDEX idx1 ON tab2(col_3(10));
-CREATE INDEX idx2 ON tab2(col_4(10));
-CREATE INDEX idx3 ON tab2(col_5(10));
-SET @col_1 = repeat('a', 5);
-SET @col_2 = repeat('b', 20);
-SET @col_3 = repeat('c', 100);
-SET @col_4 = repeat('d', 100);
-SET @col_5 = repeat('e', 100);
-SET @col_6 = repeat('f', 100);
-INSERT INTO tab2(col_1,col_2,col_3,col_4,col_5,col_6,col_7)
-VALUES (@col_1,@col_2,@col_3,@col_4,@cl_5,@col_6,5);
-INSERT INTO tab2(col_1,col_2,col_3,col_4,col_5,col_6,col_7)
-VALUES (@col_1,@col_2,@col_3,@col_4,@cl_5,@col_6,4);
-INSERT INTO tab2(col_1,col_2,col_3,col_4,col_5,col_6,col_7)
-VALUES (@col_1,@col_2,@col_3,@col_4,@cl_5,@col_6,3);
-INSERT INTO tab2(col_1,col_2,col_3,col_4,col_5,col_6,col_7)
-VALUES (@col_1,@col_2,@col_3,@col_4,@cl_5,@col_6,2);
-INSERT INTO tab2(col_1,col_2,col_3,col_4,col_5,col_6,col_7)
-VALUES (@col_1,@col_2,@col_3,@col_4,@cl_5,@col_6,1);
-SELECT * FROM tab2 ORDER BY col_7;
-# stop the server
-[1(a)]: Rewrite into new checksum=InnoDB for all *.ibd file and ibdata1
-: start the server with innodb_checksum_algorithm=strict_innodb
-INSERT INTO tab1 (pk, linestring_key, linestring_nokey)
-VALUES (2, ST_GeomFromText('LINESTRING(10 10,20 20,30 30)'), ST_GeomFromText('LINESTRING(10 10,20 20,30 30)'));
-SET @col_1 = repeat('a', 5);
-SET @col_2 = repeat('b', 20);
-SET @col_3 = repeat('c', 100);
-SET @col_4 = repeat('d', 100);
-SET @col_5 = repeat('e', 100);
-SET @col_6 = repeat('f', 100);
-INSERT INTO tab2(col_1,col_2,col_3,col_4,col_5,col_6,col_7)
-VALUES (@col_1,@col_2,@col_3,@col_4,@cl_5,@col_6,6);
-SELECT pk,ST_AsText(linestring_key),ST_AsText(linestring_nokey)
-FROM tab1 ORDER BY pk;
-SELECT * FROM tab2 ORDER BY col_7;
-# stop the server
-[1(b)]: Rewrite into new checksum=crc32 for all *.ibd file and ibdata1
-# start the server with innodb_checksum_algorithm=strict_crc32
-INSERT INTO tab1 (pk, linestring_key, linestring_nokey)
-VALUES (3, ST_GeomFromText('POLYGON((0 0,5 5,10 10,15 15,0 0),(10 10,20 20,30 30,40 40,10 10))'),
-ST_GeomFromText('POLYGON((0 0,5 5,10 10,15 15,0 0),(10 10,20 20,30 30,40 40,10 10))'));
-SET @col_1 = repeat('g', 5);
-SET @col_2 = repeat('h', 20);
-SET @col_3 = repeat('i', 100);
-SET @col_4 = repeat('j', 100);
-SET @col_5 = repeat('k', 100);
-SET @col_6 = repeat('l', 100);
-INSERT INTO tab2(col_1,col_2,col_3,col_4,col_5,col_6,col_7)
-VALUES (@col_1,@col_2,@col_3,@col_4,@cl_5,@col_6,7);
-SELECT pk,ST_AsText(linestring_key),ST_AsText(linestring_nokey)
-FROM tab1 ORDER BY pk;
-SELECT * FROM tab2 ORDER BY col_7;
-# stop the server
-[1(c)]: Rewrite into new checksum=none for all *.ibd file and ibdata1
-INSERT INTO tab1 (pk, linestring_key, linestring_nokey)
-VALUES (4, ST_GeomFromText('MULTIPOINT(0 0,5 5,10 10,20 20) '), ST_GeomFromText('MULTIPOINT(0 0,5 5,10 10,20 20) '));
-SET @col_1 = repeat('m', 5);
-SET @col_2 = repeat('n', 20);
-SET @col_3 = repeat('o', 100);
-SET @col_4 = repeat('p', 100);
-SET @col_5 = repeat('q', 100);
-SET @col_6 = repeat('r', 100);
-INSERT INTO tab2(col_1,col_2,col_3,col_4,col_5,col_6,col_7)
-VALUES (@col_1,@col_2,@col_3,@col_4,@cl_5,@col_6,8);
-SELECT pk,ST_AsText(linestring_key),ST_AsText(linestring_nokey)
-FROM tab1 ORDER BY pk;
-SELECT * FROM tab2 ORDER BY col_7;
-# stop the server
-[2]: Check the page type summary with shortform for tab1.ibd
-
-File::tab#.ibd
-================PAGE TYPE SUMMARY==============
-#PAGE_COUNT	PAGE_TYPE
-===============================================
-       #	Index page
-       #	Undo log page
-       #	Inode page
-       #	Insert buffer free list page
-       #	Freshly allocated page
-       #	Insert buffer bitmap
-       #	System page
-       #	Transaction system page
-       #	File Space Header
-       #	Extent descriptor page
-       #	BLOB page
-       #	Compressed BLOB page
-       #	Page compressed page
-       #	Page compressed encrypted page
-       #	Other type of page
-
-===============================================
-Additional information:
-Undo page type: # insert, # update, # other
-Undo page state: # active, # cached, # to_free, # to_purge, # prepared, # other
-index_id	#pages		#leaf_pages	#recs_per_page	#bytes_per_page
-#		#		#		#		#
-#		#		#		#		#
-#		#		#		#		#
-
-index_id	page_data_bytes_histgram(empty,...,oversized)
-#		#	#	#	#	#	#	#	#	#	#	#	#
-#		#	#	#	#	#	#	#	#	#	#	#	#
-#		#	#	#	#	#	#	#	#	#	#	#	#
-[3]: Check the page type summary with longform for tab1.ibd
-
-File::tab#.ibd
-================PAGE TYPE SUMMARY==============
-#PAGE_COUNT	PAGE_TYPE
-===============================================
-       #	Index page
-       #	Undo log page
-       #	Inode page
-       #	Insert buffer free list page
-       #	Freshly allocated page
-       #	Insert buffer bitmap
-       #	System page
-       #	Transaction system page
-       #	File Space Header
-       #	Extent descriptor page
-       #	BLOB page
-       #	Compressed BLOB page
-       #	Page compressed page
-       #	Page compressed encrypted page
-       #	Other type of page
-
-===============================================
-Additional information:
-Undo page type: # insert, # update, # other
-Undo page state: # active, # cached, # to_free, # to_purge, # prepared, # other
-index_id	#pages		#leaf_pages	#recs_per_page	#bytes_per_page
-#		#		#		#		#
-#		#		#		#		#
-#		#		#		#		#
-
-index_id	page_data_bytes_histgram(empty,...,oversized)
-#		#	#	#	#	#	#	#	#	#	#	#	#
-#		#	#	#	#	#	#	#	#	#	#	#	#
-#		#	#	#	#	#	#	#	#	#	#	#	#
-[4]: Page type dump for  with longform for tab1.ibd
-# Print the contents stored in dump.txt
-
-
-Filename::tab#.ibd
-==============================================================================
-	PAGE_NO		|		PAGE_TYPE			|	EXTRA INFO
-==============================================================================
-#::#		|		File Space Header		|	-
-#::#		|		Insert Buffer Bitmap		|	-
-#::#		|		Inode page			|	-
-#::#		|		Index page			|	index id=#, page level=#, No. of records=#, garbage=#, -
-#::#		|		Index page			|	index id=#, page level=#, No. of records=#, garbage=#, -
-#::#		|		Index page			|	index id=#, page level=#, No. of records=#, garbage=#, -
-#::#		|		Index page			|	index id=#, page level=#, No. of records=#, garbage=#, -
-#::#		|		Freshly allocated page		|	-
-# Variables used by page type dump for ibdata1
-
-Variables (--variable-name=value)
-and boolean options {FALSE|TRUE}  Value (after reading options)
---------------------------------- ----------------------------------------
-verbose                           TRUE
-count                             FALSE
-start-page                        0
-end-page                          0
-page                              0
-strict-check                      crc32
-no-check                          FALSE
-allow-mismatches                  0
-write                             crc32
-page-type-summary                 FALSE
-page-type-dump                    MYSQLTEST_VARDIR/tmp/dump.txt
-per-page-details                  FALSE
-log                               (No default value)
-leaf                              FALSE
-merge                             0
-[5]: Page type dump for with shortform for tab1.ibd
-
-
-Filename::tab#.ibd
-==============================================================================
-	PAGE_NO		|		PAGE_TYPE			|	EXTRA INFO
-==============================================================================
-#::#		|		File Space Header		|	-
-#::#		|		Insert Buffer Bitmap		|	-
-#::#		|		Inode page			|	-
-#::#		|		Index page			|	index id=#, page level=#, No. of records=#, garbage=#, -
-#::#		|		Index page			|	index id=#, page level=#, No. of records=#, garbage=#, -
-#::#		|		Index page			|	index id=#, page level=#, No. of records=#, garbage=#, -
-#::#		|		Index page			|	index id=#, page level=#, No. of records=#, garbage=#, -
-#::#		|		Freshly allocated page		|	-
-[6]: check the valid lower bound values for option
-# allow-mismatches,page,start-page,end-page
-[9]: check the both short and long options "page" and "start-page" when
-# seek value is larger than file size.
-FOUND 1 /Error: Unable to seek to necessary offset: Invalid argument/ in my_restart.err
-FOUND 1 /Error: Unable to seek to necessary offset: Invalid argument/ in my_restart.err
-FOUND 1 /Error: Unable to seek to necessary offset: Invalid argument/ in my_restart.err
-FOUND 1 /Error: Unable to seek to necessary offset: Invalid argument/ in my_restart.err
-[34]: check the invalid upper bound values for options, allow-mismatches, end-page, start-page and page.
-# innochecksum will fail with error code: 1
-NOT FOUND /Incorrect unsigned integer value: '18446744073709551616'/ in my_restart.err
-NOT FOUND /Incorrect unsigned integer value: '18446744073709551616'/ in my_restart.err
-NOT FOUND /Incorrect unsigned integer value: '18446744073709551616'/ in my_restart.err
-NOT FOUND /Incorrect unsigned integer value: '18446744073709551616'/ in my_restart.err
-NOT FOUND /Incorrect unsigned integer value: '18446744073709551616'/ in my_restart.err
-NOT FOUND /Incorrect unsigned integer value: '18446744073709551616'/ in my_restart.err
-NOT FOUND /Incorrect unsigned integer value: '18446744073709551616'/ in my_restart.err
-NOT FOUND /Incorrect unsigned integer value: '18446744073709551616'/ in my_restart.err
-DROP TABLE tab1,tab2;

mysql-test/suite/innodb/t/innochecksum.test

-#
-# Test innochecksum
-#
-
---source include/have_innodb.inc
-# Embedded server test does not support restarting
---source include/not_embedded.inc
-
-CREATE TABLE t1 (a INT AUTO_INCREMENT PRIMARY KEY, b TEXT) ENGINE=InnoDB;
-INSERT INTO t1 (b) VALUES ('corrupt me');
---disable_query_log
---let $i = 1000
-while ($i)
-{
-  INSERT INTO t1 (b) VALUES (REPEAT('abcdefghijklmnopqrstuvwxyz', 100));
-  dec $i;
-}
---enable_query_log
-INSERT INTO t1 (b) VALUES ('corrupt me');
-
-let $MYSQLD_DATADIR=`select @@datadir`;
-
---source include/shutdown_mysqld.inc
-
---echo # Run innochecksum on t1
---disable_result_log
---exec $INNOCHECKSUM $MYSQLD_DATADIR/test/t1.ibd
---enable_result_log
-
---source include/start_mysqld.inc
-
-DROP TABLE t1;

mysql-test/suite/innodb/t/innodb_zip_innochecksum.opt

---skip-innodb-doublewrite
---innodb-file-per-table
---innodb-file-format=Barracuda
---innodb_checksum_algorithm=crc32

mysql-test/suite/innodb/t/innodb_zip_innochecksum2.opt

---skip-innodb-doublewrite
---innodb-file-per-table
---innodb-file-format=Barracuda
---innodb-change-buffering=none

mysql-test/suite/innodb/t/innodb_zip_innochecksum2.test

-#************************************************************
-# WL6045:Improve Innochecksum
-#************************************************************
---source include/innodb_page_size_small.inc
---source include/have_debug.inc
---source include/no_valgrind_without_big.inc
-# Avoid CrashReporter popup on Mac.
---source include/not_crashrep.inc
-
---source include/not_embedded.inc
--- source include/big_test.inc
-
---disable_query_log
-# This warning occurs due to small buffer pool size(i.e. 8MB). It doesn't occur
-# with --mysqld=--innodb_buffer_pool_size=10MB
-call mtr.add_suppression("\\[Warning\\] InnoDB: Difficult to find free blocks in the buffer pool.*");
---enable_query_log
-let MYSQLD_BASEDIR= `SELECT @@basedir`;
-let MYSQLD_DATADIR= `SELECT @@datadir`;
-let SEARCH_FILE= $MYSQLTEST_VARDIR/log/my_restart.err;
-
-SET GLOBAL innodb_compression_level=0;
-SELECT @@innodb_compression_level;
-
-CREATE TABLE t1 (j LONGBLOB) ENGINE = InnoDB ROW_FORMAT=COMPRESSED KEY_BLOCK_SIZE=1;
-INSERT INTO t1 VALUES (repeat('abcdefghijklmnopqrstuvwxyz',200));
-let $i=10;
-while ($i > 0) {
-  INSERT INTO t1 SELECT * from t1;
-  dec $i;
-}
-
---echo # stop the server
---source include/shutdown_mysqld.inc
-
-# Page_type_dump for t1
---replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
---exec $INNOCHECKSUM -v --page-type-dump $MYSQLTEST_VARDIR/tmp/dump.txt $MYSQLD_DATADIR/test/t1.ibd
---file_exists $MYSQLTEST_VARDIR/tmp/dump.txt
---remove_file $MYSQLTEST_VARDIR/tmp/dump.txt
-
---echo [1]:# check the both short and long options for "help"
---exec $INNOCHECKSUM --help $MYSQLD_DATADIR/test/t1.ibd > $MYSQLTEST_VARDIR/tmp/help_output_long.txt
---exec $INNOCHECKSUM -I $MYSQLD_DATADIR/test/t1.ibd > $MYSQLTEST_VARDIR/tmp/help_output_short.txt
---diff_files $MYSQLTEST_VARDIR/tmp/help_output_long.txt $MYSQLTEST_VARDIR/tmp/help_output_short.txt
-
---echo [2]:# Run the innochecksum when file isn't provided.
---echo # It will print the innochecksum usage similar to --help option.
---error 1
---exec $INNOCHECKSUM > $MYSQLTEST_VARDIR/tmp/usage.txt
---diff_files $MYSQLTEST_VARDIR/tmp/help_output_long.txt $MYSQLTEST_VARDIR/tmp/usage.txt
---remove_file $MYSQLTEST_VARDIR/tmp/usage.txt
-
-perl;
-use strict;
-use warnings;
-use File::Copy;
-my $dir = $ENV{'MYSQLTEST_VARDIR'};
-my $file= 'help_output_long.txt';
-# open file in write mode
-open IN_FILE,"<", "$dir/tmp/$file" or die $!;
-open OUT_FILE, ">", "$dir/tmp/tmpfile" or die $!;
-while(<IN_FILE>) {
- unless ($_=~ /^debug.*$/ || $_=~ /\-#, \-\-debug.*$/ || $_=~ /http:.*html/) {
-    $_=~ s/^\S*innochecksum.+Ver.+[0-9]*\.[0-9]*\.[0-9]*.+$/innochecksum Ver #.#.#/g;
-    $_=~ s/(Copyright\s\(c\))\s([0-9]*),\s([0-9]*)(.*)/$1 YEAR, YEAR $4/g;
-    $_=~ s/Usage:.*\[-c/Usage: innochecksum [-c/g;
-    print OUT_FILE $_;
- }
-}
-close(IN_FILE);
-close(OUT_FILE);
-# move the new content from tmp file to the orginal file.
-move ("$dir/tmp/tmpfile", "$dir/tmp/$file");
-EOF
-
---cat_file $MYSQLTEST_VARDIR/tmp/help_output_long.txt
---remove_file $MYSQLTEST_VARDIR/tmp/help_output_long.txt
---remove_file $MYSQLTEST_VARDIR/tmp/help_output_short.txt
-
---echo [3]:# check the both short and long options for "count" and exit
---replace_regex /[0-9]+/#/
---exec $INNOCHECKSUM --count $MYSQLD_DATADIR/test/t1.ibd
---replace_regex /[0-9]+/#/
---exec $INNOCHECKSUM -c $MYSQLD_DATADIR/test/t1.ibd
-
---echo [4]:# Print the version of innochecksum and exit
---replace_regex /.*innochecksum.*Ver.*[0-9]*.[0-9]*.[0-9]*.*/innochecksum Ver #.#.#/
---exec $INNOCHECKSUM -V $MYSQLD_DATADIR/test/t1.ibd
-
---echo # Restart the DB server
---source include/start_mysqld.inc
-
-DROP TABLE t1;
-
---echo [5]:# Check the innochecksum for compressed table t1 with different key_block_size
---echo # Test for KEY_BLOCK_SIZE=1
---let $size=1
---source ../include/innodb-wl6045.inc
-
---echo # Test for KEY_BLOCK_SIZE=2
---let $size=2
---source ../include/innodb-wl6045.inc
-
---echo # Test for for KEY_BLOCK_SIZE=4
---let $size=4
---source ../include/innodb-wl6045.inc
-
-set innodb_strict_mode=off;
---echo # Test for for KEY_BLOCK_SIZE=8
---let $size=8
---source ../include/innodb-wl6045.inc
-
-set innodb_strict_mode=off;
---echo # Test for KEY_BLOCK_SIZE=16
---let $size=16
---source ../include/innodb-wl6045.inc
---echo # Test[5] completed

mysql-test/suite/innodb/t/innodb_zip_innochecksum3.opt

---innodb-file-per-table
---innodb-file-format=Barracuda