Correct complaints of reviewers and clean up test.

mysql-test/r/profiling.result:
  Remove unnecessary verbosity.
  
  Remove section of test that is impossible to test with PS protocol.
mysql-test/t/profiling.test:
  Remove unnecessary verbosity.
  
  Remove section of test that is impossible to test with PS protocol.
sql/sql_profile.h:
  Make bit flags unsigned ints.

mysql-test/r/profiling.result

@@ -308,88 +308,41 @@ create table profile_log (how_many int);
 drop procedure if exists p1;
 drop procedure if exists p2;
 drop procedure if exists p3;
-create procedure p1 () modifies sql data begin set profiling = ON; select 'This p1 should show up in profiling'; insert into profile_log select count(*) from information_schema.profiling; end//
-create procedure p2() deterministic begin set profiling = ON; call p1(); select 'This p2 should show up in profiling'; end//
-create procedure p3 () reads sql data begin set profiling = ON; select 'This p3 should show up in profiling'; show profile; end//
-select count(*) as count_before_p1 from information_schema.profiling;
-count_before_p1
-535
+create procedure p1 () 
+modifies sql data 
+begin 
+set profiling = ON; 
+select 'This p1 should show up in profiling'; 
+insert into profile_log select count(*) from information_schema.profiling; 
+end//
+create procedure p2() 
+deterministic 
+begin 
+set profiling = ON; 
+call p1(); 
+select 'This p2 should show up in profiling'; 
+end//
+create procedure p3 () 
+reads sql data 
+begin 
+set profiling = ON; 
+select 'This p3 should show up in profiling'; 
+show profile; 
+end//
 first call to p1
 call p1;
-This p1 should show up in profiling
-This p1 should show up in profiling
 select * from profile_log;
-how_many
-528
 second call to p1
 call p1;
-This p1 should show up in profiling
-This p1 should show up in profiling
 select * from profile_log;
-how_many
-528
-478
 third call to p1
 call p1;
-This p1 should show up in profiling
-This p1 should show up in profiling
 select * from profile_log;
-how_many
-528
-478
-443
 set session profiling = OFF;
 call p2;
-This p1 should show up in profiling
-This p1 should show up in profiling
-This p2 should show up in profiling
-This p2 should show up in profiling
 set session profiling = OFF;
 call p3;
-This p3 should show up in profiling
-This p3 should show up in profiling
-Status	Duration
-continuing inside routine	#
-checking permissions	#
-Opening tables	#
-init	#
-optimizing	#
-executing	#
-end	#
-query end	#
-closing tables	#
 show profiles;
-Query_ID	Duration	Query
-#	#	create table t3 (id int not null primary key)
-#	#	insert into t1 values (1), (2), (3)
-#	#	insert into t2 values (1), (2), (3)
-#	#	insert into t3 values (1), (2), (3)
-#	#	select * from t1
-#	#	delete from t1
-#	#	insert into t1 values (1), (2), (3)
-#	#	insert into t1 values (1), (2), (3)
-#	#	select * from t1
-#	#	select @@profiling
-#	#	create function f1() returns varchar(50) return 'hello'
-#	#	select @@profiling
-#	#	select @@profiling
-#	#	select 'This p1 should show up in profiling'
-#	#	insert into profile_log select count(*) from information_schema.profiling
-#	#	select * from profile_log
-#	#	SET profiling = ON
-#	#	select 'This p1 should show up in profiling'
-#	#	insert into profile_log select count(*) from information_schema.profiling
-#	#	select * from profile_log
-#	#	SET profiling = ON
-#	#	select 'This p1 should show up in profiling'
-#	#	insert into profile_log select count(*) from information_schema.profiling
-#	#	select * from profile_log
-#	#	SET profiling = ON
-#	#	select 'This p1 should show up in profiling'
-#	#	insert into profile_log select count(*) from information_schema.profiling
-#	#	select 'This p2 should show up in profiling'
-#	#	select 'This p3 should show up in profiling'
-#	#	show profile
 drop procedure if exists p1;
 drop procedure if exists p2;
 drop procedure if exists p3;
@@ -458,17 +411,5 @@ drop view if exists v1;
 Warnings:
 Note	1051	Unknown table 'test.v1'
 drop function if exists f1;
-select 1; select 2; select 3;;
-1
-1
-2
-2
-3
-3
-select state from information_schema.profiling where seq=1 order by query_id desc limit 3;
-state
-continuing
-continuing
-starting
 set session profiling = OFF;
 End of 5.0 tests

mysql-test/t/profiling.test

@@ -157,12 +157,30 @@ drop procedure if exists p3;
 --enable_warnings
 
 delimiter //;
-create procedure p1 () modifies sql data begin set profiling = ON; select 'This p1 should show up in profiling'; insert into profile_log select count(*) from information_schema.profiling; end//
-create procedure p2() deterministic begin set profiling = ON; call p1(); select 'This p2 should show up in profiling'; end//
-create procedure p3 () reads sql data begin set profiling = ON; select 'This p3 should show up in profiling'; show profile; end//
+create procedure p1 () 
+  modifies sql data 
+begin 
+  set profiling = ON; 
+  select 'This p1 should show up in profiling'; 
+  insert into profile_log select count(*) from information_schema.profiling; 
+end//
+create procedure p2() 
+  deterministic 
+begin 
+  set profiling = ON; 
+  call p1(); 
+  select 'This p2 should show up in profiling'; 
+end//
+create procedure p3 () 
+  reads sql data 
+begin 
+  set profiling = ON; 
+  select 'This p3 should show up in profiling'; 
+  show profile; 
+end//
 delimiter ;//
 
-select count(*) as count_before_p1 from information_schema.profiling;
+--disable_result_log
 --echo first call to p1
 call p1;
 select * from profile_log;
@@ -175,11 +193,11 @@ select * from profile_log;
 set session profiling = OFF;
 call p2;
 set session profiling = OFF;
---replace_column 2 #
 call p3;
 
 --replace_column 1 # 2 #
 show profiles;
+--enable_result_log
 
 drop procedure if exists p1;
 drop procedure if exists p2;
@@ -235,10 +253,11 @@ drop table if exists t1, t2, t3;
 drop view if exists v1;
 drop function if exists f1;
 
-# Multiple queries in one packet.
---eval select 1; select 2; select 3;
-# two continuations, one starting
-select state from information_schema.profiling where seq=1 order by query_id desc limit 3;
+## Multiple queries in one packet.  Combo statements don't work with ps-proto.
+#--eval select 1; select 2; select 3;
+## two continuations, one starting
+#select state from information_schema.profiling where seq=1 order by query_id desc limit 3;
+
 
 ## last thing in the file
 set session profiling = OFF;

sql/sql_profile.h

@@ -42,16 +42,16 @@ int fill_query_profile_statistics_info(THD *thd, TABLE_LIST *tables, Item *cond)
 int make_profile_table_for_show(THD *thd, ST_SCHEMA_TABLE *schema_table);
 
 
-#define PROFILE_NONE         0
-#define PROFILE_CPU          (1<<0)
-#define PROFILE_MEMORY       (1<<1)
-#define PROFILE_BLOCK_IO     (1<<2)
-#define PROFILE_CONTEXT      (1<<3)
-#define PROFILE_PAGE_FAULTS  (1<<4)
-#define PROFILE_IPC          (1<<5)
-#define PROFILE_SWAPS        (1<<6)
-#define PROFILE_SOURCE       (1<<16)
-#define PROFILE_ALL          (~0)
+#define PROFILE_NONE         (uint)0
+#define PROFILE_CPU          (uint)(1<<0)
+#define PROFILE_MEMORY       (uint)(1<<1)
+#define PROFILE_BLOCK_IO     (uint)(1<<2)
+#define PROFILE_CONTEXT      (uint)(1<<3)
+#define PROFILE_PAGE_FAULTS  (uint)(1<<4)
+#define PROFILE_IPC          (uint)(1<<5)
+#define PROFILE_SWAPS        (uint)(1<<6)
+#define PROFILE_SOURCE       (uint)(1<<16)
+#define PROFILE_ALL          (uint)(~0)
 
 
 #if defined(ENABLED_PROFILING) && defined(COMMUNITY_SERVER)