Add UTF8_IS_UTF8MB3 to the (session) old_mode in connections made with
sql service to run init queries

The connection is new and the global variable value takes effect
rather than the session value from the caller of spider_db_init

Noted by Eric X.

32bit uses less memory so the test for max_memory_usage does not work

This caused some crashes on 32 bit platforms.

Let us suppress this timing-sensitive warning globally.
We added it in commit d34479dc (MDEV-33053)
so that in case InnoDB hangs due to running out of buffer pool, there
would be a warning about it. On a heavily loaded system that is running
with a small buffer pool, these warnings may be occasionally issued
while page writes are in progress.

Testing exit code from popen(), comparing it with 1, and deciding that
perl.exe is not there, is a) wrong conclusion, and b) uninteresting,
because MTR always runs with perl, and with MTR_PERL set.

Background:
Recent change in 7af50e4d introduced
exit code 1 from perl snippet, that broke Windows CI. Do not want
to debug this ever again.

The IDENT_sys doesn't include keywords, so the function with the
keyword name can be created, but cannot be called.
Moving keywords to new rules keyword_func_sp_var_and_label and
keyword_func_sp_var_not_label so the functions with these
names are allowed.

Most things where wrong in the test suite.
The one thing that was a bug was that table_map_id was in some places
defined as ulong and in other places as ulonglong. On Linux 64 bit this
is not a problem as ulong == ulonglong, but on windows this caused failures.
Fixed by ensuring that all instances of table_map_id are ulonglong.

Fails with:
query 'select ST_AsWKT(GeometryCollection(Point(44, 6), @g))' failed:
ER_ILLEGAL_VALUE_FOR_TYPE (1367): Illegal non geometric '@`g`' value
found during parsing

MDEV-33279 Disable transparent huge pages after page buffers has been allocatedDisable transparent huge pages (THP)

The reason for disabling transparent huge pages (THP) is that they
do not work well with MariaDB (or other databases, see links in
MDEV-33279). The effect of using THP are that MariaDB will use much more
(10x) more memory and will no be able to release memory back to the system.

Disabling THP is done after all storage engines are started, to allow
buffer pools and keybuffers (big allocations) to be allocated as huge
pages.

- Removed not used variable 'file' from MYSQL_BIN_LOG::open()
- Assigned not initialized variable in connect/tabext.cpp

Problem was that TMP_TABLE_PARAM was not properly initialized

optimizer-adjust_secondary_key_costs is added to provide 2 small
adjustments to the 10.x optimizer cost model. This can be used in the
case where the optimizer wrongly uses a secondary key instead of a
clustered primary key.

The reason behind this change is that MariaDB 10.x does not take into
account that for engines like InnoDB, that scanning a primary key can be
up to 7x faster than scanning a secondary key + read the row data trough
the primary key.

The different values for optimizer_adjust_secondary_key_costs are:

optimizer_adjust_secondary_key_costs=0
- No changes to current model

optimizer_adjust_secondary_key_costs=1
- Ensure that the cost of of secondary indexes has a cost of at
  least 5x times the cost of a clustered primary key (if one exists).
  This disables part of the worst_seek optimization described below.

optimizer_adjust_secondary_key_costs=2
- Disable "worst_seek optimization" and adjust filter cost slightly
  (add cost of 1 if filter is used).

The idea behind 'worst_seek optimization' is that we limit the
cost for all non clustered ref access to the least of:
- best-rows-by-range (or all rows in no range found) / 10
- scan-time-table (roughly number of file blocks to scan table) * 3

In addition we also do not try to use rowid_filter if number of rows
estimated for 'ref' access is less than the worst_seek limitation.

The idea is that worst_seek is trying to take into account that if
we do a lot of accesses through a key, this is likely to be cached.
However it only does this for secondary keys, and not for clustered
keys or index only reads.

The effect of the worst_seek are:
- In some cases 'ref' will have a much lower cost than range or using
  a clustered key.
- Some possible rowid filters for secondary keys will be ignored.

When implementing optimizer_adjust_secondary_key_costs=2, I noticed
that there is a slightly different costs for how ref+filter and
range+filter are calculated.  This caused a lot of range and
range+filter to change to ref+filter, which is not good as
range+filter provides the optimizer a better estimate of how many
accepted rows there will be in the result set.
Adding a extra small cost (1 seek) when using filter mitigated the
above problems in almost all cases.

This patch should not be applied to MariaDB 11.0 as worst_seeks is
removed in 11.0 and the cost calculation for clustered keys, secondary
keys, index scan and filter is more exact.

Test case changes for --optimizer-adjust_secondary_key_costs=1
(Fix secondary key costs to be 5x of primary key):

- stat_tables_innodb:
  - Complex change (probably ok as number of rows are really small)
    - ref over 1 row changed to range over 10 rows with join buffer
    - ref over 5 rows changed to eq_ref
    - secondary ref over 1 row changed to ref of primary key over 4 rows
    - Change of key to use longer key with index pushdown (a little
      bit worse but not significant).
  - Change to use secondary (1 row) -> primary (4 rows)
- rowid_filter_innodb:
  - index_merge (2 rows) & ref (1) -> all (23 rows) -> primary eq_ref.

Test case changes for --optimizer-adjust_secondary_key_costs=2
(remove of worst_seeks & adjust filter cost):

- stat_tables_innodb:
  - Join order change (probably ok as number of rows are really small)
  - ref (5 rows) & ref(1 row) changed to range (10 rows & join buffer)
    & eq_ref.
- selectivity_innodb:
  - ref -> ref|filter  (ok)
- rowid_filter_innodb:
  - ref -> ref|filter (ok)
  - range|filter (64 rows) changed to ref|filter (128 rows).
    ok as ref|filter outputs wrong number of rows in explain.
- range, range_mrr_icp:
  -ref (500 rows -> ALL (1000 rows) (ok)
- select_pkeycache, select, select_jcl6:
  - ref|filter (2 rows) -> ref (2 rows) (ok)
- selectivity:
  - ref -> ref_filter (ok)
- range:
  - Change of 'filtered' but no stat or plan change (ok)
- selectivity:
 - ref -> ref+filter (ok)
 - Change of filtered but no plan change (ok)
- join_nested_jcl6:
  - range -> ref|filter (ok as only 2 rows)
- subselect3, subselect3_jcl6:
  - ref_or_null (4 rows) -> ALL (10 rows) (ok)
  - Index_subquery (4 rows) -> ALL (10 rows)  (ok)
- partition_mrr_myisam, partition_mrr_aria and partition_mrr_innodb:
  - Uses ALL instead of REF for a key value that is the same for > 50%
    of rows.  (good)
order_by_innodb:
  - range (200 rows) -> ref (20 rows)+filesort (ok)
- subselect_sj2_mat:
  - One test changed. One ALL removed and replaced with eq_ref. Likely
    to be better.
- join_cache:
  - Changed ref over 60% of the rows to use hash join (ok)
- opt_tvc:
  - Changed to use eq_ref instead of ref with plan change (probably ok)
- opt_trace:
  - No worst/max seeks clipping (good).
  - Almost double range_scan_time and index_scan_time (ok).
- rowid_filter:
  - ref -> ref|filtered (ok)
  - range|filter (77 rows) changed to ref|filter (151 rows).  Proably
    ok as ref|filter outputs wrong number of rows in explain.

Reviewer: Sergei Petrunia <sergey@mariadb.com>

In the case of calcuating cost for a ref access for which there exists
a usable range, the variable keyread_tmp would always be 0.
If there is also another index that could be used as a filter, the cost
of that filter would be wrong.
In many cases 'the worst_seeks optimzation' would disable the filter
from getting used, which is why this bug has not been noticed before.

The next commit, which allows one to disable worst_seeks, will have a
test case for this bug.

The old code collected a list of THD's, locked the THD's from getting
deleted by locking two mutex and then later in a separate loop
sent a kill signal to each THD.

The problem with this approach is that, as THD's can be reused,
the second time the THD is killed, the mutex can be taken in
different order, which signals failures in safe_mutex.

Fixed by sending the kill signal directly and not collect the THD's
in a list to be signaled later.  This is the same approach we are using
in kill_zombie_dump_threads().

Other things:
- Reset safe_mutex_t->locked_mutex when freed (Safety fix)

This was needed to get semisync to work on Windows.

rpl_semi_sync_slave_enabled_consistent.test and the first part of
the commit message comes from Brandon Nesterenko.

A test to show how to induce the "Read semi-sync reply magic number
error" message on a primary. In short, if semi-sync is turned on
during the hand-shake process between a primary and replica, but
later a user negates the rpl_semi_sync_slave_enabled variable while
the replica's IO thread is running; if the io thread exits, the
replica can skip a necessary call to kill_connection() in
repl_semisync_slave.slave_stop() due to its reliance on a global
variable. Then, the replica will send a COM_QUIT packet to the
primary on an active semi-sync connection, causing the magic number
error.

The test in this patch exits the IO thread by forcing an error;
though note a call to STOP SLAVE could also do this, but it ends up
needing more synchronization. That is, the STOP SLAVE command also
tries to kill the VIO of the replica, which makes a race with the IO
thread to try and send the COM_QUIT before this happens (which would
need more debug_sync to get around). See THD::awake_no_mutex for
details as to the killing of the replica’s vio.

Notes:
- The MariaDB documentation does not make it clear that when one
  enables semi-sync replication it does not matter if one enables
  it first in the master or slave. Any order works.

Changes done:
- The rpl_semi_sync_slave_enabled variable is now a default value for
  when semisync is started. The variable does not anymore affect
  semisync if it is already running. This fixes the original reported
  bug.  Internally we now use repl_semisync_slave.get_slave_enabled()
  instead of rpl_semi_sync_slave_enabled. To check if semisync is
  active on should check the @@rpl_semi_sync_slave_status variable (as
  before).
- The semisync protocol conflicts in the way that the original
  MySQL/MariaDB client-server protocol was designed (client-server
  send and reply packets are strictly ordered and includes a packet
  number to allow one to check if a packet is lost). When using
  semi-sync the master and slave can send packets at 'any time', so
  packet numbering does not work. The 'solution' has been that each
  communication starts with packet number 1, but in some cases there
  is still a chance that the packet number check can fail.  Fixed by
  adding a flag (pkt_nr_can_be_reset) in the NET struct that one can
  use to signal that packet number checking should not be done. This
  is flag is set when semi-sync is used.
- Added Master_info::semi_sync_reply_enabled to allow one to configure
  some slaves with semisync and other other slaves without semisync.
  Removed global variable semi_sync_need_reply that would not work
  with multi-master.
- Repl_semi_sync_master::report_reply_packet() can now recognize
  the COM_QUIT packet from semisync slave and not give a
  "Read semi-sync reply magic number error" error for this case.
  The slave will be removed from the Ack listener.
- On Windows, don't stop semisync Ack listener just because one
  slave connection is using socket_id > FD_SETSIZE.
- Removed busy loop in Ack_receiver::run() by using
 "Self-pipe trick" to signal new slave and stop Ack_receiver.
- Changed some Repl_semi_sync_slave functions that always returns 0
  from int to void.
- Added Repl_semi_sync_slave::slave_reconnect().
- Removed dummy_function Repl_semi_sync_slave::reset_slave().
- Removed some duplicate semisync notes from the error log.
- Add test of "if (get_slave_enabled() && semi_sync_need_reply)"
  before calling Repl_semi_sync_slave::slave_reply().
  (Speeds up the code as we can skip all initializations).
- If epl_semisync_slave.slave_reply() fails, we disable semisync
  for that connection.
- We do not call semisync.switch_off() if there are no active slaves.
  Instead we check in Repl_semi_sync_master::commit_trx() if there are
  no active threads. This simplices the code.
- Changed assert() to DBUG_ASSERT() to ensure that the DBUG log is
  flushed in case of asserts.
- Removed the internal rpl_semi_sync_slave_status as it is not needed
  anymore. The @@rpl_semi_sync_slave_status status variable is now
  mapped to rpl_semi_sync_enabled.
- Removed rpl_semi_sync_slave_enabled  as it is not needed anymore.
  Repl_semi_sync_slave::get_slave_enabled() contains the active status.
- Added checking that we do not add a slave twice with
  Ack_receiver::add_slave(). This could happen with old code.
- Removed Repl_semi_sync_master::check_and_switch() as it is not
  needed anymore.
- Ensure that when we call Ack_receiver::remove_slave() that the slave
  is removed from the listener before function returns.
- Call listener.listen_on_sockets() outside of mutex for better
  performance and less contested mutex.
- Ensure that listening is ignoring newly added slaves when checking for
  responses.
- Fixed the master ack_receiver listener is not killed if there are no
  connected slaves (and thus stop semisync handling of future
  connections). This could happen if all slaves sockets where would be
  marked as unreliable.
- Added unlink() to base_ilist_iterator and remove() to
  I_List_iterator. This enables us to remove 'dead' slaves in
  Ack_recever::run().
- kill_zombie_dump_threads() now does killing of dump threads properly.
  - It can now kill several threads (should be impossible but could
    happen if IO slaves reconnects very fast).
  - We now wait until the dump thread is done before starting the
    dump.
- Added an error if kill_zombie_dump_threads() fails.
- Set thd->variables.server_id before calling
  kill_zombie_dump_threads(). This simplies the code.
- Added a lot of comments both in code and tests.
- Removed DBUG_EVALUATE_IF "failed_slave_start" as it is not used.

Test changes:
- rpl.rpl_session_var2 added which runs rpl.rpl_session_var test with
  semisync enabled.
- Some timings changed slight with startup of slave which caused
  rpl_binlog_dump_slave_gtid_state_info.text to fail as it checked the
  error log file before the slave had started properly. Fixed by
  adding wait_for_pattern_in_file.inc that allows waiting for the
  pattern to appear in the log file.
- Tests have been updated so that we first set
  rpl_semi_sync_master_enabled on the master and then set
  rpl_semi_sync_slave_enabled on the slaves (this is according to how
  the MariaDB documentation document how to setup semi-sync).
- Error text "Master server does not have semi-sync enabled" has been
  replaced with "Master server does not support semi-sync" for the
  case when the master supports semi-sync but semi-sync is not
  enabled.

Other things:
- Some trivial cleanups in Repl_semi_sync_master::update_sync_header().
- We should in 11.3 changed the default value for
  rpl-semi-sync-master-wait-no-slave from TRUE to FALSE as the TRUE
  does not make much sense as default. The main difference with using
  FALSE is that we do not wait for semisync Ack if there are no slave
  threads.  In the case of TRUE we wait once, which did not bring any
  notable benefits except slower startup of master configured for
  using semisync.

Co-author: Brandon Nesterenko <brandon.nesterenko@mariadb.com>

This solves the problem reported in MDEV-32960 where a new
slave may not be registered in time and the master disables
semi sync because of that.

client is not using any database to execute the SQL.

Analysis:
When there is no database, the database string is NULL so (null) gets
printed.
Fix:
Print NULL instead of (null) because when there is no database SELECT
DATABASE() return NULL. SO NULL is more appropriate choice.

to SQL error plugin

New plugin variable "with_db_and_thread_info" is added which prints the
thread id and databse name to the logfile. the value is stored in variable
"with_db_and_thread_info"

log_sql_errors() is responsible for printing in the log. If detailed is
enabled, print thread id and database name both, otherwise skip it.

Notably MDEV-33290, columnstore disable stays in 10.5.

MCOL-5611 supporting with Boost-1.80, the version "next_prime"
disappears from https://github.com/boostorg/unordered/blob/boost-1.79.0/include/boost/unordered/detail/implementation.hpp
makes it the currenly highest supported versions.

Lets check this version.

While CMake-3.19+ supports version ranges in package determinations this
isn't supported for Boost in Cmake-3.28. So we check for the 1.80 and
don't compile ColumnStore.

Statements affect by this bug are all SQL statements that
1) prefixed with "EXPLAIN"
2) have a lower level join structure created for a union subquery.

A bug in select_describe() passed an incorrect "result" object to
mysql_explain_union(), resulting in unpredictable behaviour and
out of context calls.

Reviewed by: Oleksandr Byelkin, sanja@mariadb.com

An existing binlog checksum can be overridden to 0 if writing a NULL
payload when using Zlib for the computation. That is, calling into
Zlib's crc32 with empty data initializes an incremental CRC
computation to 0.

This patch changes the Log_event_writer::write_data() to exit
immediately if there is nothing to write, thereby bypassing the
checksum computation. This follows the pattern of
Log_event_writer::encrypt_and_write(), which also exits immediately
if there is no data to write.

Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>

A mix of path separators looks odd.

  InnoDB: Loading buffer pool(s) from C:\xampp\mysql\data/ib_buffer_pool

This was changed in cf552f58

Both forward slashes and backward slashes work on Windows. We do not
use \\?\ names.

So we improve the consistent look of it so it doesn't look like a bug.

Normalize, in this case, the path separator to \ for making the filename.

Reported thanks to Github user @celestinoxp.

Closes: https://github.com/ApacheFriends/xampp-build/issues/33
Reviewed by: Marko Mäkelä and Vladislav Vaintroub

use pkg-config to find pcre2, if possible

rename PCRE_INCLUDES to use PKG_CHECK_MODULES naming, PCRE_INCLUDE_DIRS

MDEV-32968  InnoDB fails to restore tablespace first page from doublewrite buffer when page is empty

recv_dblwr_t::find_first_page(): Free the allocated memory
to read the first 3 pages from tablespace.

innodb.doublewrite: Added sleep to ensure page cleaner thread
wake up from my_cond_wait

Revert "MDEV-32899 InnoDB is holding shared dict_sys.latch while waiting for FOREIGN KEY child table lock on DDL"

This reverts commit 569da6a7,
commit 768a7361, and
commit ba6bf7ad
because of a regression that was filed as MDEV-33104.

In commit a55b951e (MDEV-26827)
an error was introduced in a rarely executed code path of the
buf_flush_page_cleaner() thread. As a result, the function
buf_flush_LRU() could be invoked while not holding buf_pool.mutex.

Reviewed by: Debarun Banerjee

buf_flush_LRU(): Display a warning if no pages could be evicted and
no writes initiated.

buf_pool_t::need_LRU_eviction(): Renamed from buf_pool_t::ran_out().
Check if the amount of free pages is smaller than innodb_lru_scan_depth
instead of checking if it is 0.

buf_flush_page_cleaner(): For the final LRU flush after a checkpoint
flush, use a "budget" of innodb_io_capacity_max, like we do in the
case when we are not in "furious" checkpoint flushing.

Co-developed by: Debarun Banerjee
Reviewed by: Debarun Banerjee
Tested by: Matthias Leich