The reason for this behavior is that SP get cached, per connection.
The stored_program_cache is size of this cache, which amounts to 256
routines by default. A compiled stored procedure can easily be several
megabytes in size. Thus calling SHOW CREATE PROCEDURE for all stored
procedures, like mysqldump does, can require significant amount of memory.

Fixed by bypassing the cache for "SHOW CREATE". This should normally be
fine also perfomance-wise, as cache is meant to be used for repeated
execution, not repeated SHOW CREATEs.

Added a test to verify that CREATE PROCEDURE + SHOW CREATE PROCEURE do not
cache, i.e amount of allocated memory does not change.

Note, there is a change in existing behavior in an edge case :
If "SHOW CREATE PROCEDURE p1" called from p1, after p1 was altered, now
this will now return altered code. Previour behavior - relied on caching
and would return old code. The previous behavior might was not necessarily
correct.

Revert 88a4be75 and
9d97f92f, which had been
prematurely pushed by accident.

last commit  8221708e removed too much,
mtr is failing

Create minidump when server fails to shutdown. If process is being
debugged, cause a debug break.

Moves some code which is part of safe_kill into mysys, as both safe_kill,
and mysqltest produce minidumps on different timeouts.

Small cleanup in wait_until_dead() - replace inefficient loop with a single
wait.

Fixed flaws with overly strict or, conversely,
overly soft verification of certificates in some
scenarios:

1. Removed the check that the 'commonname' (CN) in the
   certificate matches the 'localhost' value on the side
   of the joiner node, which was performed earlier, even
   if the address was received by the script only as an
   argument (out of the exchange via the Galera protocol) -
   since for the joining node this argument always contains
   its own local address, not the address of the remote host,
   so it is always treated as 'localhost', which is not
   necessarily true (outside of mtr testing);
2. Removed checking the domain name or IP-address of the
   peer node in the encrypt=2 mode;
3. Fixed checking of compliance of certificates when
   rsync SST is used;
4. Added the ability to specify CA not only as a file,
   but also as a path to the directory where the certificates
   are stored. To do this, the user just needs to specify the
   path to this directory as the value ssl-ca or tca parameter,
   ending with the '/' character.

trx_rseg_header_create(): Add a parameter for the value that is
to be written to TRX_RSEG_MAX_TRX_ID. If we omit this write, then
the updated test innodb.undo_truncate will fail for the 4k, 8k, 16k
page sizes. This was broken ever since
commit 947efe17 (MDEV-15158)
removed the writes of transaction identifiers to the TRX_SYS page.

srv_do_purge(): Truncate undo tablespaces also during slow shutdown
(innodb_fast_shutdown=0).

Thanks to Krunal Bauskar for noticing this problem.

RedHat systems have both files for lsb and init functions.
Old code was written as if/else, so second file (RedHat-specific) was not processed.
So, systemd redirect didn't work, because its logic is described in
RedHat-specific functions file

This reverts commit 30dea459.

This patch is the plan D variant for fixing potetial mutex locking
order exercised by BF aborting and KILL command execution.

In this approach, KILL command is replicated as TOI operation.
This guarantees total isolation for the KILL command execution
in the first node: there is no concurrent replication applying
and no concurrent DDL executing. Therefore there is no risk of
BF aborting to happen in parallel with KILL command execution
either. Potential mutex deadlocks between the different mutex
access paths with KILL command execution and BF aborting cannot
therefore happen.

TOI replication is used, in this approach,  purely as means
to provide isolated KILL command execution in the first node.
KILL command should not (and must not) be applied in secondary
nodes. In this patch, we make this sure by skipping KILL
execution in secondary nodes, in applying phase, where we
bail out if applier thread is trying to execute KILL command.
This is effective, but skipping the applying of KILL command
could happen much earlier as well.

This patch also fixes mutex locking order and unprotected
THD member accesses on bf aborting case. We try to hold
THD::LOCK_thd_data during bf aborting. Only case where it
is not possible is at wsrep_abort_transaction before
call wsrep_innobase_kill_one_trx where we take InnoDB
mutexes first and then THD::LOCK_thd_data.

This will also fix possible race condition during
close_connection and while wsrep is disconnecting
connections.

Added wsrep_bf_kill_debug test case
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>

Revert "MDEV-24873 galera.galera_as_slave_ctas MTR failed:..."

This reverts commit 29bbcac0 and
later commit 5ecaf52d.

At least since commit 055a3334
(MDEV-13564) the undo log truncation in InnoDB did not work correctly.

The main issue is that during the execution of
trx_purge_truncate_history() some pages of the newly truncated
undo tablespace could be discarded.

fsp_try_extend_data_file(): Apply the peculiar rounding of
fil_space_t::size_in_header only to the system tablespace,
whose size can be expressed in megabytes in a configuration parameter.
Other files may freely grow by a number of pages.

fseg_alloc_free_page_low(): Do allow the extension of undo tablespaces,
and mention the file name in the error message.

mtr_t::commit_shrink(): Implement crash-safe shrinking of a tablespace
file. First, durably write the log, then shrink the file, and finally
release the page latches of the rebuilt tablespace. Refactored from
trx_purge_truncate_history().

log_write_and_flush_prepare(), log_write_and_flush(): New functions
to durably write log during mtr_t::commit_shrink().

- Handle stored function conditions correctly, with the same logic as with UDFs.
- When running queries on Spider SE, by default, we do not push down WHERE conditions containing usage of UDFs/stored functions to remote data nodes, unless the user demands (by setting spider_use_pushdown_udf).
- Disable direct update/delete when a udf condition is skipped.

- Handle stored function conditions correctly, with the same logic as with UDFs.
- When running queries on Spider SE, by default, we do not push down WHERE conditions containing usage of UDFs/stored functions to remote data nodes, unless the user demands (by setting spider_use_pushdown_udf).

MDEV-23506 mariadb-connector-c-devel package from standard RHEL 8 repo conflicts with MariaDB's packages

added alternative name for MariaDB-devel package to replace
mariadb-connector-c-devel from RHEL 8 distribution.
this patch is for 10.3+ on RHEL/Centos 8

SST scripts currently use Linux-specific construction
to create a temporary directory if the path prefix for
that directory is specified by the user. This does not
work with FreeBSD. This commit adds support for FreeBSD.

No separate test required.

btr_defragment_save_defrag_stats_if_needed(): Do not save
defragmentation statistics for temporary tables.
They are exempt of defragmentation anyway
(ha_innobase::optimize() never invokes defragmentation for them),
and the user-visible names are not available inside InnoDB.

Furthermore, InnoDB assumes that temporary tables are never accessed
by other threads than the one that handles the session with which
the temporary table is associated with.

Furthermore, we simplify the test innodb.innodb_defrag_stats
and include a test case that demonstrates that defragmentation
statistics are no longer being saved for temporary tables.

Test case fail to include undo tablespace while waiting for the
encryption thread to encrypt all existing tablespace

Thanks Karl Levik

release lock in all as cases n xbstream_open, also fix the case where malloc would return NULL.

This file had not been compiled for long time.
Remove this from the tree.

InnoDB could evict the fts auxiliary table in
row_fts_merge_insert(). So bulk insert could be
dealing with garbage FTS auxiliary table.Patch
should delay closing the table in row_fts_merge_insert().

# Conflicts:
#	cmake/os/Windows.cmake
#	sql/sql_yacc.yy

A conversion warning 4267 that we want to disable(prior to 10.3),
was suppressed with  cmake VS generator for C++ and C, despite being set
only for CXX flags.

The fix is to disable the warning in C flags, too. In 10.2, this warning
is noisy, in 10.3 it is fixed.

The st_blksize returned by fstat(2) is not documented to be
a power of 2, like we assumed in
commit 58252fff (MDEV-26040).
While on Linux, the st_blksize appears to report the file system
block size (which hopefully is not smaller than the sector size
of the underlying block device), on FreeBSD we observed
st_blksize values that might have been something similar to st_size.

Also IBM AIX was affected by this. A simple test case would
lead to a crash when using the minimum innodb_buffer_pool_size=5m
on both FreeBSD and AIX:

seq -f 'create table t%g engine=innodb select * from seq_1_to_200000;' \
1 100|mysql test&
seq -f 'create table u%g engine=innodb select * from seq_1_to_200000;' \
1 100|mysql test&

We will fix this by not trusting st_blksize at all, and assuming that
the smallest allowed write size (for O_DIRECT) is 4096 bytes. We hope
that no storage systems with larger block size exist. Anything larger
than 4096 bytes should be unlikely, given that it is the minimum
virtual memory page size of many contemporary processors.

MariaDB Server on Microsoft Windows was not affected by this.

While the 512-byte sector size of the venerable Seagate ST-225 is still
in widespread use, the minimum innodb_page_size is 4096 bytes, and
innodb_log_file_size can be set in integer multiples of 65536 bytes.

The only occasion where InnoDB uses smaller data file block sizes than
4096 bytes is with ROW_FORMAT=COMPRESSED tables with KEY_BLOCK_SIZE=1
or KEY_BLOCK_SIZE=2 (or innodb_page_size=4096). For such tables,
we will from now on preallocate space in integer multiples of 4096 bytes
and let regular writes extend the file by 1024, 2048, or 3072 bytes.

The view INFORMATION_SCHEMA.INNODB_SYS_TABLESPACES.FS_BLOCK_SIZE
should report the raw st_blksize.

For page_compressed tables, the function fil_space_get_block_size()
will map to 512 any st_blksize value that is larger than 4096.

os_file_set_size(): Assume that the file system block size is 4096 bytes,
and only support extending files to integer multiples of 4096 bytes.

fil_space_extend_must_retry(): Round down the preallocation size to
an integer multiple of 4096 bytes.