This reverts commit a1b6691f.

because #ifdef checks the symbol defined in ssl_compat.h,
so #include <ssl_compat.h> cannot be inside #ifdef

Add printing

Extract the indexed string memcopy pattern in spd_trx.cc to a static
inline function.

Also updated the ubsan check in mdev_26541.test (h/t roel).

This reverts commit 0a99d457
because it should go into only 10.5+

MDEV-31183 binlog_encryption.encrypted_master_switch_to_unencrypted_gtid fails in BB with UBSAN runtime error: downcast of address

sql/log.cc:11101:56: runtime error: downcast of address 0x7f9dc801e9c8 which does not point to an object of type 'Gtid_list_log_event'
sql/sql_repl.cc:1429:12: runtime error: member call on address 0x7f1ca401ea48 which does not point to an object of type 'Gtid_list_log_event'

The problem is that a parallel replica would not immediately stop
running/queued transactions when issued STOP SLAVE. That is, it
allowed the current group of transactions to run, and sometimes the
transactions which belong to the next group could be started and run
through commit after STOP SLAVE was issued too, if the last group
had started committing. This would lead to long periods to wait for
all waiting transactions to finish.

This patch updates a parallel replica to try and abort immediately
and roll-back any ongoing transactions. The exception to this is any
transactions which are non-transactional (e.g. those modifying
sequences or non-transactional tables), and any prior transactions,
will be run to completion.

The specifics are as follows:

 1. A new stage was added to SHOW PROCESSLIST output for the SQL
Thread when it is waiting for a replica thread to either rollback or
finish its transaction before stopping. This stage presents as
“Waiting for worker thread to stop”

 2. Worker threads which error or are killed no longer perform GCO
cleanup if there is a concurrently running prior transaction. This
is because a worker thread scheduled to run in a future GCO could be
killed and incorrectly perform cleanup of the active GCO.

 3. Refined cases when the FL_TRANSACTIONAL flag is added to GTID
binlog events to disallow adding it to transactions which modify
both transactional and non-transactional engines when the binlogging
configuration allow the modifications to exist in the same event,
i.e. when using binlog_direct_non_trans_update == 0 and
binlog_format == statement.

 4. A few existing MTR tests relied on the completion of certain
transactions after issuing STOP SLAVE, and were re-recorded
(potentially with added synchronizations) under the new rollback
behavior.

Reviewed By
===========
Andrei Elkin <andrei.elkin@mariadb.com>

The code in choose_best_splitting() assumed that the join prefix is
in join->positions[].

This is not necessarily the case. This function might be called when
the join prefix is in join->best_positions[], too.
Follow the approach from best_access_path(), which calls this function:
pass the current join prefix as an argument,
"const POSITION *join_positions" and use that.

This reverts commit b05218e0.

This reverts commit 844ddb11.

This fixes MDEV-30967, MDEV-31325, MDEV-31388

This bug could affect queries containing a subquery over splittable derived
tables and having an outer references in its WHERE clause. If such subquery
contained an equality condition whose left part was a reference to a column
of the derived table and the right part referred only to outer columns
then the server crashed in the function st_join_table::choose_best_splitting()
The crashing code was added in the commit ce7ffe61
that made the code of the function sensitive to presence of the flag
OUTER_REF_TABLE_BIT in the KEYUSE_EXT::needed_in_prefix fields.

The field needed_in_prefix of the KEYUSE_EXT structure should not contain
table maps with OUTER_REF_TABLE_BIT or RAND_TABLE_BIT.

Note that this fix is quite conservative: for affected queries it just
returns the query plans that were used before the above mentioned commit.
In fact the equalities causing crashes should be pushed into derived tables
without any usage of split optimization.

Approved by Sergei Petrunia <sergey@mariadb.com>

EXPLAIN EXTENDED should always print the field item used in the left part
of an equality expression from the SET clause of an update statement as a
reference to table column.

Approved by Oleksandr Byelkin <sanja@mariadb.com>

process multibyte characters correctly, don't escape half of the character

mysqltest should use the same collation_connection in the service
connection (that creates views) as in the main connection

this makes weight_string("aaa") to return the expected value in --view
and fixes main.func_str failure in --view

* disable main.join_cache_notasan on 32bit
  as it uses join_buffer_size=5250229460064350213;

* update sysvars_server_embedded,32bit.rdiff

This reverts commit 1d0e3d80.

generated by the language server ccls

The warning is true, it needs to be initialized.

Caused by: MDEV-26301 / ce7ffe61

Do not start TOI for CREATE TEMPORARY SEQUENCE because
object is local only and not replicated. Similarly,
avoid starting RSU for TEMPORARY SEQUENCEs. Finally,
we need to run commit hooks for TEMPORARY SEQUENCEs
because CREATE TEMPORARY SEQUENCE does implicit
commit for previous changes that need to be replicated
and committed.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>

- Fix feature summary
- Use native CMake module instead of `CMAKE_MODULE_PATH`
- Make Java and JNI package as required

Reviewer: <daniel@mariadb.org>

The problem was that JOIN_CACHE::alloc_buffer() did not check if the
given join_buffer_value is less than the query require.

Added a check for this and disabled join cache if it cannot be used.

MDEV-30197 : Missing DBUG_RETURN or DBUG_VOID_RETURN macro in function "Wsrep_schema::restore_view()"

Here user is starting server with unsupported client charset.
We need to create wsrep_schema tables using explicit latin1
charset to avoid errors in restoring view.

This test was re-enabled in commit 0174a9ff, and
has been failing since then.
The test is configured such that Galera runs with commit ordering
disabled, a configuration which is which was meant for testing the
performance penalty of commit ordering (not meant to be used in
practice).
Moreover, we have test galera_sr.galera_sr_bf_abort, which is
identical, but runs with commit ordering enabled.
No reasons to keep the failing test around.

This is a backport from 10.5.

The problem seems to be a deadlock between KILL command execution
and BF abort issued by an applier, where:
* KILL has locked victim's LOCK_thd_kill and LOCK_thd_data.
* Applier has innodb side global lock mutex and victim trx mutex.
* KILL is calling innobase_kill_query, and is blocked by innodb
  global lock mutex.
* Applier is in wsrep_innobase_kill_one_trx and is blocked by
  victim's LOCK_thd_kill.

The fix in this commit removes the TOI replication of KILL command
and makes KILL execution less intrusive operation. Aborting the
victim happens now by using awake_no_mutex() and ha_abort_transaction().
If the KILL happens when the transaction is committing, the
KILL operation is postponed to happen after the statement
has completed in order to avoid KILL to interrupt commit
processing.

Notable changes in this commit:
* wsrep client connections's error state may remain sticky after
  client connection is closed. This error message will then pop
  up for the next client session issuing first SQL statement.
  This problem raised with test galera.galera_bf_kill.
  The fix is to reset wsrep client error state, before a THD is
  reused for next connetion.
* Release THD locks in wsrep_abort_transaction when locking
  innodb mutexes. This guarantees same locking order as with applier
  BF aborting.
* BF abort from MDL was changed to do BF abort on server/wsrep-lib
  side first, and only then do the BF abort on InnoDB side. This
  removes the need to call back from InnoDB for BF aborts which originate
  from MDL and simplifies the locking.
* Removed wsrep_thd_set_wsrep_aborter() from service_wsrep.h.
  The manipulation of the wsrep_aborter can be done solely on
  server side. Moreover, it is now debug only variable and
  could be excluded from optimized builds.
* Remove LOCK_thd_kill from wsrep_thd_LOCK/UNLOCK to allow more
  fine grained locking for SR BF abort which may require locking
  of victim LOCK_thd_kill. Added explicit call for
  wsrep_thd_kill_LOCK/UNLOCK where appropriate.
* Wsrep-lib was updated to version which allows external
  locking for BF abort calls.

Changes to MTR tests:
* Disable galera_bf_abort_group_commit. This test is going to
  be removed (MDEV-30855).
* Record galera_gcache_recover_manytrx as result file was incomplete.
  Trivial change.
* Make galera_create_table_as_select more deterministic:
  Wait until CTAS execution has reached MDL wait for multi-master
  conflict case. Expected error from multi-master conflict is
  ER_QUERY_INTERRUPTED. This is because CTAS does not yet have open
  wsrep transaction when it is waiting for MDL, query gets interrupted
  instead of BF aborted. This should be addressed in separate task.
* A new test galera_kill_group_commit to verify correct behavior
  when KILL is executed while the transaction is committing.
Co-authored-by: Seppo Jaakola <seppo.jaakola@iki.fi>
Co-authored-by: Jan Lindström <jan.lindstrom@galeracluster.com>
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>

The problem was trying to access JOIN_TAB::select which is set to NULL
when using the filesort. The correct way is accessing either
JOIN_TAB::select or JOIN_TAB::filesort->select depending on whether
the filesort is used.
This commit introduces member function JOIN_TAB::get_sql_select()
encapsulating that check so the code duplication is eliminated.

The new condition (s->table->quick_keys.is_set(best_key->key))
was added to  best_access_path() to eliminate a Valgrind error.
The cause of that error was using TRASH_ALLOC(quick_key_parts)
instead of bzero(quick_key_parts); hence, accessing
s->table->quick_key_parts[best_key->key]) without prior checking
for quick_keys.is_set() might have caused reading "dirty" memory

Follow the approach taken in the rest of the test.

rw_trx_hash_t::find() acquires element->mutex, then unpins pins, used for
lf_hash element search. After that the "element" can be deallocated and
reused by some other thread.

If we take a look rw_trx_hash_t::insert()->lf_hash_insert()->lf_alloc_new()
calls, we will not find any element->mutex acquisition, as it was not
initialized yet before it's allocation. rw_trx_hash_t::insert() can reuse
the chunk, unpinned in rw_trx_hash_t::find().

The scenario is the following:

1. Thread 1 have just executed lf_hash_search() in
rw_trx_hash_t::find(), but have not acquired element->mutex yet.
2. Thread 2 have removed the element from hash table with
rw_trx_hash_t::erase() call.
3. Thread 1 acquired element->mutex and unpinned pin 2 pin with
lf_hash_search_unpin(pins) call.
4. Some thread purged memory of the element.
5. Thread 3 reused the memory for the element, filled element->id,
element->trx.
6. Thread 1 crashes with failed "DBUG_ASSERT(trx_id == trx->id)"
assertion.

Note that trx_t objects are also reused, see the code around trx_pools
for details.

The fix is to invoke "lf_hash_search_unpin(pins);" after element->trx is
stored in local variable in rw_trx_hash_t::find().

Reviewed by: Nikita Malyavin, Marko Mäkelä.

Note to mergers: Do not merge this commit to 10.5+. An additional PR
will be created for the 10.5 branch which is compatible with later
branches.

Include cppcheck and FlawFinder for SAST scanning.

From 10.6, cherry-picked 12bf5c46 (Remove unused French translations in
Connect engine) and c6072ed9 (Ensure that source files contain only
valid UTF8 encodings). Necessary for FlawFinder to execute and useful
anyway.

Removing MSAN build and test as it was not introduced until 10.5 and
does not successfully build.

Remove failing upgrade test since Fedora installs MariaDB 10.5 and the
10.5->10.4 upgrade rightfully complains

Add to skiplist failing test: main.func_math (MDEV-20966)

All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer
Amazon Web Services, Inc.

Modern software (including text editors, static analysis software,
and web-based code review interfaces) often requires source code files
to be interpretable via a consistent character encoding, with UTF-8 or
ASCII (a strict subset of UTF-8) as the default. Several of the MariaDB
source files contain bytes that are not valid in either the UTF-8 or
ASCII encodings, but instead represent strings encoded in the
ISO-8859-1/Latin-1 or ISO-8859-2/Latin-2 encodings.

These inconsistent encodings may prevent software from correctly
presenting or processing such files. Converting all source files to
valid UTF8 characters will ensure correct handling.

Comments written in Czech were replaced with lightly-corrected
translations from Google Translate. Additionally, comments describing
the proper handling of special characters were changed so that the
comments are now purely UTF8.

All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer
Amazon Web Services, Inc.
Co-authored-by: Andrew Hutchings <andrew@linuxjedi.co.uk>