Also deprecating table params not implemented in MDEV-28856.

This patch augments Gtid_log_event with the user thread-id.
In particular that compensates for the loss of this info in
Rows_log_events.

Gtid_log_event::thread_id gets visible in mysqlbinlog output like

  #231025 16:21:45 server id 1  end_log_pos 537 CRC32 0x1cf1d963  GTID 0-1-2 ddl thread_id=10

as 64 bit unsigned integer.

While the size of Gtid event has grown by 8-9 bytes
replication from OLD <-> NEW is not affected by it.

This work was started by the late Sujatha Sivakumar.
Brandon Nesterenko took it over, reviewed initial patches and extended
the work.

Reviewed-by: <andrei.elkin@mariadb.com>

Summary
=======
With FULL_NODUP mode, before image inclues all columns and after
image inclues only the changed columns. flashback will swap the
value of changed columns from after image to before image.
For example:
  BI: c1, c2, c3_old, c4_old
  AI: c3_new, c4_new
flashback will reconstruct the before and after images to
  BI: c1, c2, c3_new, c4_new
  AI: c3_old, c4_old

Implementation
==============
When parsing the before and after image, position and length of
the fields are collected into ai_fields and bi_fields, if it is an
Update_rows_event and the after image doesn't includes all columns.

The changed fields are swapped between bi_fields and ai_fields.
Then it recreates the before image and after image by using
bi_fields and ai_fields. nullbit will be set to 1 if the
field is NULL, otherwise nullbit will be 0.

It also optimized flashback a little bit.
- calc_row_event_length is used instead of print_verbose_one_row
- swap_buff1 and swap_buff2 are removed.

BASE 62 uses 0-9, A-Z and then a-z to give the numbers 0-61. This patch
increases the range of the string functions to cover this.

Based on ideas and tests in PR #2589, but re-written into the charset
functions.

Includes fix by Sergei, UBSAN complained:
ctype-simple.c:683:38: runtime error: negation of -9223372036854775808
cannot be represented in type 'long long int'; cast to an unsigned
type to negate this value to itself
Co-authored-by: Weijun Huang <huangweijun1001@gmail.com>
Co-authored-by: Sergei Golubchik <serg@mariadb.org>

           Field_new_decimal::store_value(const my_decimal*, int*)

Analysis
========
When rpl applier is unpacking a before row image, Field::reset() will be
called before setting a field to null if null bit of the field is set in
the row image. For Field_new_decimal::reset(), it calls
Field_new_decimal::store_value() to reset the value. store_value() asserts
that the field is in the write_set bitmap since it thinks the field is
updating.

But that is not true for the row image generated in FULL_NODUP
mode. In the mode, the before image includes all fields and the after
image includes only updated fields.

Fix
===
In the case unpacking binlog row images, the assertion is meaningless.
So the unpacking field is marked in write_set temporarily to avoid the
assertion failure.

When innodb_undo_log_truncate=ON causes an InnoDB undo tablespace
to be truncated, we must guarantee that the undo tablespace will
be rebuilt atomically: After mtr_t::commit_shrink() has durably
written the mini-transaction that rebuilds the undo tablespace,
we must not write any old pages to the tablespace.

To guarantee this, in trx_purge_truncate_history() we used to
traverse the entire buf_pool.flush_list in order to acquire
exclusive latches on all pages for the undo tablespace that
reside in the buffer pool, so that those pages cannot be written
and will be evicted during mtr_t::commit_shrink(). But, this
traversal may interfere with the page writing activity of
buf_flush_page_cleaner(). It would be better to lazily discard
the old pages of the truncated undo tablespace.

fil_space_t::is_being_truncated, fil_space_t::clear_stopping(): Remove.

fil_space_t::create_lsn: A new field, identifying the LSN of the
latest rebuild of a tablespace.

buf_page_t::flush(), buf_flush_try_neighbors(): Evict pages whose
FIL_PAGE_LSN is below fil_space_t::create_lsn.

mtr_t::commit_shrink(): Update fil_space_t::create_lsn and
fil_space_t::size right before the log is durably written and the
tablespace file is being truncated.

fsp_page_create(), trx_purge_truncate_history(): Simplify the logic.

Reviewed by: Thirunarayanan Balathandayuthapani, Vladislav Lesin
Performance tested by: Axel Schwenke
Correctness tested by: Matthias Leich

trx_purge_free_segment(), trx_purge_truncate_rseg_history():
Do not claim that the blocks will be modified in the mini-transaction,
because that will not always be the case. Whenever there is a
modification, mtr_t::set_modified() will flag it.

The debug assertion that failed in recovery is checking that all
changes to data pages are covered by log records. Due to these
incorrect calls, we would unnecessarily write unmodified data pages,
which is something that commit 05fa4558
aims to avoid.

The incorrect calls had originally been added in
commit de31ca6a (MDEV-32820) and
commit 86767bcc (MDEV-29593).

Reviewed by: Vladislav Lesin
Tested by: Elena Stepanova

perfschema thread walker needs to take thread's LOCK_thd_kill to prevent
the thread from disappearing why it's being looked at.
But there's no need to lock it for the current thread.

In fact, it was harmful as some code down the stack might take
LOCK_thd_kill (e.g. set_killed() does it, and my_malloc_size_cb_func()
calls set_killed()). And it caused a bunch of mutexes being locked under
LOCK_thd_kill, which created problems later when my_malloc_size_cb_func()
called set_killed() at some unspecified point under some
random mutexes.

same assertion with spider. spider status variables
didn't expect to be queried from a different thread
without LOCK_thd_data.

And they didn't expect to be queried under LOCK_thd_data either
(because spider_get_trx() calls thd_set_ha_data()).

reduce code duplication

need to protect access to thread-local cache_mngr with LOCK_thd_data

technically only access from different threads has to be protected,
but this is the SHOW STATUS code path, so the difference is neglectable

use utf8mb4 with PCRE2, not utf8mb3

- Move it from delete.test to delete_innodb.test
- Use --source include/innodb_stable_estimates.inc to make it predicatable.

buf_flush_page_cleaner(): A continue or break inside DBUG_EXECUTE_IF
actually is a no-op. Use an explicit call to _db_keyword_() to
actually avoid advancing the checkpoint.

buf_flush_list_now_set(): Invoke os_aio_wait_until_no_pending_writes()
to ensure that the page write to the system tablespace is completed.

MDEV-33101 Server crashes when starting the server with innodb-force-recovery=6 and enabling the innodb_truncate_temporary_tablespace_now variable

The issue is introduced by "MDEV-28699: Shrink temporary tablespaces
without restart". SRV_FORCE_NO_LOG_REDO forces server to read only mode
and we don't initialize temporary tablespace in read only mode.

solution: innodb_truncate_temporary_tablespace_now should be no-op in
read only mode.

srv_start(): Move a read only mode startup tweak from
innodb_init_params() to the correct location. Also if
innodb_force_recovery=6 we will disable the doublewrite buffer,
because InnoDB must run in read-only mode to prevent further corruption.

This change only affects debug checks. Whenever srv_read_only_mode holds,
the buf_pool.flush_list will be empty, that is, there will be no writes
of persistent InnoDB data pages.

Reviewed by: Thirunarayanan Balathandayuthapani

- innodb.doublewrite_debug should avoid the checkpoint
before killing the server. So used debug sync and
innodb_flush_sync to avoid the checkpoint completely.
Test case allowed to skip on MSAN builder due to extra
checkpoint.

wsrep_plugin_init(), wsrep_plugin_deinit(): Remove these dummy functions
in order to fix an error that would be flagged by cmake -DWITH_UBSAN=ON
when using clang.

wsrep_show_ready(), wsrep_show_bf_aborts(): Correct the signature.

If a query has a HAVING clause that contains a predicate with a constant
IN subquery whose lef part in its turn is a subquery and the predicate is
subject to pushdown from HAVING to WHERE then execution of the query could
cause a crash of the server.

The cause of the problem was the missing implementation of the walk()
method for the class Item_in_optimizer. As a result in some cases the left
operand of the Item_in_optimizer condition could be traversed twice by
the walk procedure. For many call-back functions used as an argument of
this procedure it does not matter. Yet it matters for the call-back
function cleanup_excluding_immutables_processor() used in pushdown of
predicates from HAVING to WHERE. If the processed item is marked with
the IMMUTABLE_FL flag then the processor just removes this flag, otherwise
it performs cleanup of the item making it unfixed. If an item is marked
with an the IMMUTABLE_FL and it traversed with this processor twice then
it becomes unfixed after the second traversal though the flag indicates
that the item should not be cleaned up.

Approved by Oleksandr Byelkin <sanja@mariadb.com>