InnoDB timeout behavior (Bug #24200)


mysql-test/t/innodb_mysql-master.opt:
  Set --innodb-lock-wait-timeout=2, since test for bug #24200 times out.
  
  This *could* cause random test failures if some long-running transaction concurrency is being tested.  However, such a test really should go in innodb-big or some other test file.

into  mysql.com:/data0/mysqldev/my/build-200612151202-5.0.32/mysql-5.0-release


sql/ha_innodb.cc:
  Auto merged

Applied innodb-5.0-ss1040 and innodb-5.0-ss1099 snapshots.

Bugs fixed:
- Bug #21468: InnoDB crash during recovery with corrupted data pages: XA bug?
- Bug #24299: Identifiers in foreign keys cannot contain U+0160, U+0360, ..., U+FF60
- Bug #24386: Performance degradation caused by instrumentation in mutex_struct
- Bug #24712: SHOW TABLE STATUS for file-per-table showing incorrect time fields


innobase/dict/dict0dict.c:
  Applied innodb-5.0-ss1040 and innodb-5.0-ss1099 snapshots.
  
  Revision r1030:
  branches/5.0: Replace isspace() with a wrapper ib_isspace(), because on
  Win32 isspace(0xa0) appears to hold.  (Bug #24299)
innobase/include/sync0rw.h:
  Applied innodb-5.0-ss1040 and innodb-5.0-ss1099 snapshots.
  
  Revision r1040:
  branches/5.0: Port r1039 from trunk:
  
  Port r1034 from branches/zip: Remove some instrumentation and reduce
  the output of SHOW MUTEX STATUS in non-debug builds.  (Bug #24386)
innobase/include/sync0sync.h:
  Applied innodb-5.0-ss1040 and innodb-5.0-ss1099 snapshots.
  
  Revision r1040:
  branches/5.0: Port r1039 from trunk:
  
  Port r1034 from branches/zip: Remove some instrumentation and reduce
  the output of SHOW MUTEX STATUS in non-debug builds.  (Bug #24386)
innobase/include/sync0sync.ic:
  Applied innodb-5.0-ss1040 and innodb-5.0-ss1099 snapshots.
  
  Revision r1040:
  branches/5.0: Port r1039 from trunk:
  
  Port r1034 from branches/zip: Remove some instrumentation and reduce
  the output of SHOW MUTEX STATUS in non-debug builds.  (Bug #24386)
innobase/log/log0recv.c:
  Applied innodb-5.0-ss1040 and innodb-5.0-ss1099 snapshots.
  
  Revision r1076:
  branches/5.0: Remove the unintentionally committed change to univ.i in r1075.
  Fix assertion failure sync0sync.c line 1239
  (the latter ut_error in sync_thread_reset_level())
  in crash recovery when UNIV_SYNC_DEBUG is enabled.
  
  
  Revision r1079:
  branches/5.0: recv_recovery_from_checkpoint_finish(): Add 1 sec delay
  before switching on the sync order checks in crash recovery, so that
  file I/O threads have time to suspend themselves.
innobase/srv/srv0start.c:
  Applied innodb-5.0-ss1040 and innodb-5.0-ss1099 snapshots.
  
  Revision r1075:
  branches/5.0: Fix assertion failure sync0sync.c line 1239
  (the latter ut_error in sync_thread_reset_level())
  in crash recovery when UNIV_SYNC_DEBUG is enabled.
  
  
  Revision r1077:
  branches/5.0: innobase_start_or_create_for_mysql(): Remove unnecessary delay
  now that we moved the setting sync_order_checks_on=TRUE to log0recv.c,
  to the start of the rollback phase in crash recovery.
innobase/sync/sync0rw.c:
  Applied innodb-5.0-ss1040 and innodb-5.0-ss1099 snapshots.
  
  Revision r1040:
  branches/5.0: Port r1039 from trunk:
  
  Port r1034 from branches/zip: Remove some instrumentation and reduce
  the output of SHOW MUTEX STATUS in non-debug builds.  (Bug #24386)
innobase/sync/sync0sync.c:
  Applied innodb-5.0-ss1040 and innodb-5.0-ss1099 snapshots.
  
  Revision r1040:
  branches/5.0: Port r1039 from trunk:
  
  Port r1034 from branches/zip: Remove some instrumentation and reduce
  the output of SHOW MUTEX STATUS in non-debug builds.  (Bug #24386)
innobase/trx/trx0roll.c:
  Applied innodb-5.0-ss1040 and innodb-5.0-ss1099 snapshots.
  
  Revision r1067:
  branches/5.0: trx_rollback_for_mysql(), trx_commit_for_mysql():
  Protect the creation of trx_dummy_sess with kernel_mutex.
  This error was introduced in r1046 and r1050.
  
  
  Revision r1050:
  branches/5.0: trx_rollback_for_mysql(): Fix the comment introduced in r1046.
  
  trx_commit_for_mysql(): Use the dummy trx->sess also for committing a prepared
  transaction in XA recovery, just in case our code would need the session
  object also in that case (does not seem to need it right now).
  
  
  Revision r1048:
  branches/5.0: trx_rollback_for_mysql(): Do not set trx->sess back to NULL.
  This bug was introduced in r1046.
  
  
  Revision r1046:
  branches/5.0: trx_rollback_for_mysql(): Ensure that trx->sess is non-NULL
  when calling trx_general_rollback_for_mysql().  This removes a segmentation
  fault when rolling back a prepared transaction in XA recovery.  (Bug #21468)
innobase/trx/trx0trx.c:
  Applied innodb-5.0-ss1040 and innodb-5.0-ss1099 snapshots.
  
  Revision r1067:
  branches/5.0: trx_rollback_for_mysql(), trx_commit_for_mysql():
  Protect the creation of trx_dummy_sess with kernel_mutex.
  This error was introduced in r1046 and r1050.
  
  
  Revision r1050:
  branches/5.0: trx_rollback_for_mysql(): Fix the comment introduced in r1046.
  
  trx_commit_for_mysql(): Use the dummy trx->sess also for committing a prepared
  transaction in XA recovery, just in case our code would need the session
  object also in that case (does not seem to need it right now).
sql/ha_innodb.cc:
  Applied innodb-5.0-ss1040 and innodb-5.0-ss1099 snapshots.
  
  Revision r1040:
  branches/5.0: Port r1039 from trunk:
  
  Port r1034 from branches/zip: Remove some instrumentation and reduce
  the output of SHOW MUTEX STATUS in non-debug builds.  (Bug #24386)
  
  
  Revision r1099:
  branches/5.0: Merge revision 1098 from trunk: Fix bug #24712: SHOW TABLE
  STATUS for file-per-table showing incorrect time fields

into  kahlann.erinye.com:/home/df/mysql/build/mysql-5.0-release


support-files/mysql.spec.sh:
  Auto merged

into  kahlann.erinye.com:/home/df/mysql/build/mysql-5.0-build-work


mysql-test/mysql-test-run.pl:
  Auto merged

into  kahlann.erinye.com:/home/df/mysql/build/mysql-5.0-build-work

    Fix the move of "mysqlmanager" to section 8: Directory name was wrong.


support-files/mysql.spec.sh:
  Fix the move of "mysqlmanager" to section 8: Directory name was wrong.

into  kahlann.erinye.com:/home/df/mysql/build/mysql-5.0-build-work


mysql-test/mysql-test-run.pl:
  Auto merged

support-files/mysql.spec.sh:
  fixup

into  kahlann.erinye.com:/home/df/mysql/build/mysql-4.1-build-work

into  kahlann.erinye.com:/home/df/mysql/build/mysql-5.0-build-work

into  trift2.:/MySQL/M50/push-5.0

    The "mysqlmanager" man page got moved from section 1 to 8.


support-files/mysql.spec.sh:
  The "mysqlmanager" man page got moved from section 1 to 8.

into  trift2.:/MySQL/M50/spec-5.0


support-files/mysql.spec.sh:
  Manual merge.

    The Docs team has two new manpages for the "server" RPM: "my_print_defaults" and "mysql_tzinfo_to_sql".


support-files/mysql.spec.sh:
  The Docs team has two new manpages for the "server" RPM: "my_print_defaults" and "mysql_tzinfo_to_sql".

into  kahlann.erinye.com:/home/df/mysql/build/mysql-4.1-build-work

into  kahlann.erinye.com:/home/df/mysql/build/mysql-5.0-build-work


mysql-test/mysql-test-run.pl:
  Auto merged

into  kahlann.erinye.com:/home/df/mysql/build/mysql-5.0-build

mysql-test/Makefile.am:
  BUG#24902

into  mysql.com:/home/gluh/MySQL/Merge/5.0-opt


sql/sql_class.h:
  Auto merged

into  mysql.com:/home/gluh/MySQL/Merge/5.0-opt

into  mysql.com:/home/gluh/MySQL/Merge/4.1-opt

into  kahlann.erinye.com:/home/df/mysql/build/mysql-5.0-build


mysql-test/mysql-test-run.pl:
  Auto merged

into  kahlann.erinye.com:/home/df/mysql/build/mysql-5.0-build-work

mysql-test/lib/mtr_unique.pl:
  do not autorelease build ids when a child dies

into  kahlann.erinye.com:/home/df/mysql/build/mysql-5.0-build-work


scripts/Makefile.am:
  Auto merged
scripts/mysqld_multi.sh:
  Auto merged

scripts/Makefile.am:
  pass --sysconfdir to scripts
scripts/mysqlaccess.sh:
  use --sysconfdir instead of hardcoded /etc
scripts/mysqld_multi.sh:
  use --sysconfdir instead of hardcoded /etc

mysql-test/r/gis.result:
  result fixed
mysql-test/t/gis.test:
  path to datafile fixed

mysql-test/r/gis.result:
  result fixed
sql/field.cc:
  Field_*::reset() now returns int
sql/sql_load.cc:
  merging fix

Remove DBUG_ENTER in my_end


client/mysqltest.c:
  Call 'mysql_server_end' as last function in 'free_used_memory'
  Don't use DBUG_VOID_RETURN after mysql_server_end in free_used_memory
  Only call mysql_server_end if mysql_server_init has been called

into  mysql.com:/home/hf/work/22372/my50-22372


mysql-test/r/gis.result:
  merging
mysql-test/t/gis.test:
  merging
sql/field.cc:
  merging
sql/field.h:
  merging
sql/sql_load.cc:
  merging

datafile added to be used in gis.test


mysql-test/std_data/bad_gis_data.dat:
  New BitKeeper file ``mysql-test/std_data/bad_gis_data.dat''

The problem is that the GEOMETRY NOT NULL can't automatically set
any value as a default one. We always tried to complete LOAD DATA
command even if there's not enough data in file. That doesn't work
for GEOMETRY NOT NULL. Now Field_*::reset() returns an error sign
and it's checked in mysql_load()


mysql-test/r/gis.result:
  test result
mysql-test/t/gis.test:
  testcase
sql/field.cc:
  reset() now returns error sign
sql/field.h:
  Field_*::reset() now returns error sign if the field can't be reset
sql/sql_load.cc:
  check if field can't be reset and return error if it's so

into  neptunus.(none):/home/msvensson/mysql/mysql-5.0-maint

into  neptunus.(none):/home/msvensson/mysql/mysql-4.1-maint

into  neptunus.(none):/home/msvensson/mysql/mysql-5.0-maint


mysql-test/mysql-test-run.pl:
  Auto merged