Bug#12612184 RACE CONDITION AFTER BTR_CUR_PESSIMISTIC_UPDATE()

The fix introduced potentially more severe crash recovery problems
than the bug causes. Revert the fix for now.

This was an attempt to address problems with the Bug#12612184 fix.
Even with this follow-up fix, crash recovery can be broken.
Let us fix the bug later.

In the ON UPDATE CASCADE clause of FOREIGN KEY constraints, the
calculated update vector was not fully initialized. This bug was
introduced in the InnoDB Plugin when implementing support for
ROW_FORMAT=DYNAMIC.

Additionally, the data type information was not initialized, but
apparently it has never been needed in this case.  Nevertheless, it is
not good programming practice to pass uninitialized values around.

calc_row_difference(): Declare the update field uninitialized in
Valgrind. Copy the data type information as well, except when the
field is SQL NULL. In the built-in InnoDB, initialize
ufield->extern_storage = FALSE (an initialization bug that had gone
unnoticed this far). The InnoDB Plugin and later have this flag to
dfield_t and have always initialized it properly.

row_ins_cascade_calc_update_vec(): Reduce the scope of some
pointers. Initialize orig_len. (This caused the bug in InnoDB Plugin
and later.)

row_ins_foreign_check_on_constraint(): Simplify a condition. Declare
the update vector uninitialized.

rb:771 approved by Jimmy Yang

PARENT FOR OTHER ONE

Do not try to lookup key_nr'th key in 'table' because there may not be such
a key there. key_nr is the number of the key in the _child_ table name, not
in the parent table.

Instead just print the fields of the record that are covered by the first key
defined on the parent table.

This bug gets a better fix in MySQL 5.6, which is too risky for 5.1 and 5.5.

Approved by:	Jon Olav Hauglid (via IM)

Fixed a misplaced parenthesis, injected due to
syncing from libedit CVS head.

             BREAKS SOURCE RELEASE BUILD

Some of the required files were not getting copied while
performing 'make dist' and hence the build failed for
the created distribution source.

Added the missing files to Makefile.am.

btr_record_not_null_field_in_rec(): Remove the parameter rec.
Use rec_offs_nth_sql_null() instead of rec_get_nth_field().

rb:788 approved by Jimmy Yang

               USING MYISAM_USE_MMAP ON WINDOWS

When OPTIMIZE/REPAIR TABLE is switching to new data file,
old data file is removed while memory mapping is still
active.

With 5.1 implementation of nt_share_delete() it is not
permitted to remove mmaped file.

This fix disables memory mapping for mi_repair() operations.

mysql-test/r/myisam.result:
  A test case for BUG#11757032.
mysql-test/t/myisam.test:
  A test case for BUG#11757032.
storage/myisam/ha_myisam.cc:
  mi_repair*() functions family use file I/O even if memory
  mapping is available.
  
  Since mixing mmap I/O and file I/O may cause various artifacts,
  memory mapping must be disabled.
storage/myisam/mi_delete_all.c:
  Clean-up: do not attempt to remap file after truncate, since
  there is nothing to map.

sql/sp_head.cc:
  alignment-safe copy
sql/sql_cache.cc:
  alignment-safe copy
sql/sql_parse.cc:
  alignment-safe copy

               WITH LIBEDIT

Libedit won't build on platforms that do not provide
"sys/cdefs.h".

Removed the inclusion of cdefs.h from all files
other that sys.h, which includes this file only
when the header is found while configuring.

Buffer over-run on all platforms, crash on windows, wrong result on other platforms,
when rounding numbers which start with 999999999 and have
precision = 9 or 18 or 27 or 36 ...


mysql-test/r/type_newdecimal.result:
  New test cases.
mysql-test/t/type_newdecimal.test:
  New test cases.
sql/my_decimal.h:
  Add sanity checking code, to catch buffer over/under-run.
strings/decimal.c:
  The original initialization of intg1 (add 1 if buf[0] == DIG_MAX)
  will set p1 to point outside the buffer, and the loop to copy the original value
      while (buf0 < p0)
        *(--p1) = *(--p0);
  will overwrite memory outside the my_decimal object.

Updated libedit library.

hash index at shutdown

btr_search_disable(): Just drop the entire adaptive hash index,
without dropping every record separately.

buf_pool_clear_hash_index(): Renamed and simplified from
buf_pool_drop_hash_index(). Set block->index = NULL for every block in
the buffer pool. Do not release the btr_search_latch. The caller will
have to adjust other data structures.

Remove block->is_hashed. It is redundant, should be always equal to
block->index != NULL.

Remove btr_search_fully_disabled, btr_search_enabled_mutex, and
SYNC_SEARCH_SYS_CONF. We drop the AHI in one pass, without releasing
the btr_search_latch in between.

Replace void* with const rec_t* and add assertions on btr_search_latch
and btr_search_enabled to ha0ha.h, ha0ha.ic, ha0ha.c.

page_set_max_trx_id(): Ignore the adaptive hash index. I forgot to
push this in rb:750.

btr0sea.c: Always after acquiring btr_search_latch, check for
block->index==NULL or !btr_search_enabled. We can now set
block->index=NULL while only holding btr_search_latch in exclusive
mode. Always acquire btr_search_latch before reading block->index,
except in shortcuts when testing for block->index == NULL.

ha_clear(), ha_search(): Unused function, remove.

buf_page_peek_if_search_hashed(): Remove. This function may avoid
latching a page at the cost of doing a duplicate buf_pool->page_hash
lookup.

rb:775 approved by Inaam Rana

bug#11766457 - adjusting/modifying the the tests as tests were failing if system time zone is set differently.

 
A buffer large enough to hold the query _plus_ some additional
data is allocated before parsing is started.   The additional data 
is used by the query cache, and consists of the name of the current 
database and a set of flags.
 
When a packet containing multiple SQL statements is sent to the
server and one of the statements changes the current database
(a "USE <db>" statement), and the name of the new current database 
is longer than of the previous,  there is not enough space in the 
buffer for the new name, and we write out over the buffer boundary.

The fix adds an extra field to store the number of bytes
allocated to the database name in the buffer.  If the current
database name changes, and the new name is longer than the
previous one, we refuse to cache the query.

Problematic query:
insert ignore into `t1_federated` (`c1`) select `c1` from  `t1_local` a
where not exists (select 1 from `t1_federated` b where a.c1 = b.c1);
When this query is killed in another connection it could lead to crash.
The problem is follwing:
An attempt to obtain table statistics for subselect table in killed query
fails with an error. So JOIN::optimize() for subquery is failed but
it does not prevent further subquery evaluation.
At the first subquery execution JOIN::optimize() is called
(see subselect_single_select_engine::exec()) and fails with
an error. 'executed' flag is set to TRUE and it prevents
further subquery evaluation. At the second call
JOIN::optimize() does not happen as 'JOIN::optimized' is TRUE
and in case of uncacheable subquery the 'executed' flag is set
to FALSE before subquery evaluation. So we loose 'optimize stage'
error indication (see subselect_single_select_engine::exec()).
In other words 'executed' flag is used for two purposes, for
error indication at JOIN::optimize() stage and for an
indication of subquery execution. And it seems it's wrong
as the flag could be reset.


mysql-test/r/error_simulation.result:
  test case
mysql-test/t/error_simulation.test:
  test case
sql/item_subselect.cc:
  added new flag subselect_single_select_engine::optimize_error
  which is used for error detection which could happen at optimize
  stage.
sql/item_subselect.h:
  added new flag subselect_single_select_engine::optimize_error
sql/sql_select.cc:
  test case

rw_lock_x_lock_func(): Assert that the thread is not already holding
the lock in a conflicting mode (RW_LOCK_SHARED).

rw_lock_s_lock_func(): Assert that the thread is not already holding
the lock in a conflicting mode (RW_LOCK_EX).

Bug 12980094 - ASSERTION IN INNODB DETECTED IN RQG_PARTITION_DDL
Bug 13034534 - RQG TESTS FAIL ON WINDOWS WITH CRASH NEAR RW_LOCK_DEBUG_PRINT

All access to struct rw_lock_debug_struct must be protected by rw_lock_debug_mutex_enter().

Change the RPM spec file so that each RPM "obsoletes" the corresponding RPMs
of all (other) configurations, so a "server" RPM of any configuration
can replace the "server" RPM of any other configuration on a "rpm -U".