This fixes the regression introduced in 5.1 that prevents 64 bit builds on Intel while still keeping the core2 hack operational so the cluster can build.

Remove a self assignment.
Rework a few constructs to avoid a potential overflow.

Based upon patch contributed by Michal Hrusecky

storage/ndb/src/kernel/blocks/dbdict/Dbdict.cpp:
  Remove self assignment, the object is being initialized.
storage/ndb/src/mgmsrv/InitConfigFileParser.cpp:
  Setup the string in a single snprintf.

On 64-bits machines the calculation gets the wrong types and results
in very large numbers. Fixed by explicitly cast month to (int)

Failing to connect would release parts of the MYSQL struct.
We would then proceed to try again to connect without re-
initializing the struct.

We prevent the unwanted freeing of data we'll still need now.


client/mysqladmin.cc:
  Losing a connection (or not even getting on in the first place) should
  not trash the MYSQL-struct.
  
  Add a lot of comments.
  
  Rewrite re-connection fu.
sql-common/client.c:
  Assert against bad parameters usually caused by de-initing a
  MYSQL-struct without re-initing it again before re-use.

Update the test case for BUG#44331 to fix the push build failure.

            results in server crash 
 
check_group_min_max_predicates() assumed the input condition 
item to be one of COND_ITEM, SUBSELECT_ITEM, or FUNC_ITEM. 
Since a condition of the form "field" is also a valid condition 
equivalent to "field <> 0", using such a condition in a query 
where the loose index scan was chosen resulted in a debug 
assertion failure. 
 
Fixed by handling conditions of the FIELD_ITEM type in 
check_group_min_max_predicates(). 

mysql-test/r/group_min_max.result:
  Added a test case for bug #46607.
mysql-test/t/group_min_max.test:
  Added a test case for bug #46607.
sql/opt_range.cc:
  Handle conditions of the FUNC_ITEM type in 
  check_group_mix_max_predicates().

If an EVENT is created without the DEFINER clause set explicitly or with it set  
to CURRENT_USER, the master and slaves become inconsistent. This issue stems from 
the fact that in both cases, the DEFINER is set to the CURRENT_USER of the current 
thread. On the master, the CURRENT_USER is the mysqld's user, while on the slave,  
the CURRENT_USER is empty for the SQL Thread which is responsible for executing 
the statement.

To fix the problem, we do what follows. If the definer is not set explicitly,  
a DEFINER clause is added when writing the query into binlog; if 'CURRENT_USER' is 
used as the DEFINER, it is replaced with the value of the current user before 
writing to binlog.

mysql-test/suite/rpl/r/rpl_create_if_not_exists.result:
  Updated the result file after fixing bug#44331
mysql-test/suite/rpl/r/rpl_drop_if_exists.result:
  Updated the result file after fixing bug#44331
mysql-test/suite/rpl/r/rpl_events.result:
  Test result of Bug#44331
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
  Updated the result file after fixing bug#44331
mysql-test/suite/rpl/t/rpl_events.test:
  Added test to verify if the definer is consistent between master and slave
  when the event is created without the DEFINER clause set explicitly or the
  DEFINER is set to CURRENT_USER
sql/events.cc:
  The "create_query_string" function is added to create a new query string 
  for removing executable comments.
sql/sql_yacc.yy:
  The remember_name token was added for recording the offset of EVENT_SYM.

mysql-test/r/lock_multi_bug38499.result:
  Update test case result.
mysql-test/r/lock_multi_bug38691.result:
  Update test case result.
mysql-test/t/lock_multi_bug38499.test:
  Do not sync .frm files.
mysql-test/t/lock_multi_bug38691.test:
  Do not sync .frm files.

with gcc 4.3.2
      
This patch fixes a number of GCC warnings about variables used
before initialized. A new macro UNINIT_VAR() is introduced for
use in the variable declaration, and LINT_INIT() usage will be
gradually deprecated. (A workaround is used for g++, pending a
patch for a g++ bug.)
      
GCC warnings for unused results (attribute warn_unused_result)
for a number of system calls (present at least in later
Ubuntus, where the usual void cast trick doesn't work) are
also fixed.


client/mysqlmanager-pwgen.c:
  A fix for warn_unused_result, adding fallback to use of
  srand()/rand() if /dev/random cannot be used. Also actually
  adds calls to rand() in the second branch so that it actually
  creates a random password.

client/mysql.cc:
  Remove leading whitespace.
  Remove extra text after #else directive.
client/mysqldump.c:
  Function does not take a parameter.
mysys/array.c:
  buffer is a uchar pointer.
sql/item.cc:
  Assert if it should not happen.
storage/myisam/mi_check.c:
  Cast to expected type. This is probably a bug, but it is
  casted in a similar way in another part of the code.
storage/ndb/include/mgmapi/ndb_logevent.h:
  Apply fix from cluster team.
tests/mysql_client_test.c:
  Remove extraneous slash.

sql/opt_range.cc:
  Removed duplicate code (if statement must have been duplicated during earlier merge).
sql/sql_partition.cc:
  After mergeing bug#46362 and bug#20577, the NULL partition was also searched
  when col = const, fixed by checking if = or range.

When a connection is dropped any remaining temporary table is also automatically
dropped and the SQL statement of this operation is written to the binary log in
order to drop such tables on the slave and keep the slave in sync. Specifically,
the current code base creates the following type of statement:
DROP /*!40005 TEMPORARY */ TABLE IF EXISTS `db`.`table`;

Unfortunately, appending the database to the table name in this manner circumvents
the replicate-rewrite-db option (and any options that check the current database).
To solve the issue, we started writing the statement to the binary as follows:
use `db`; DROP /*!40005 TEMPORARY */ TABLE IF EXISTS `table`;

Slave does not correctly handle "expected errors" leading to inconsistencies
between the mater and slave. Specifically, when a statement changes both
transactional and non-transactional tables, the transactional changes are
automatically rolled back on the master but the slave ignores the error and
does not roll them back thus leading to inconsistencies.
      
To fix the problem, we automatically roll back a statement that fails on
the slave but note that the transaction is not rolled back unless a "rollback"
command is in the relay log file.

mysql-test/extra/rpl_tests/rpl_mixing_engines.test:
  Enabled item 13.e which was disabled because of the bug fixed by the
  current and removed item 14 which was introduced by mistake.

  field references

This error requires a combination of factors : 
1. An "impossible where" in the outermost SELECT
2. An aggregate in the outermost SELECT
3. A correlated subquery with a WHERE clause that includes an outer 
field reference as a top level WHERE sargable predicate

When JOIN::optimize detects an "impossible WHERE" it will bail out
without doing the rest of the work and initializations. It will not
call make_join_statistics() as well.  And make_join_statistics fills 
in various structures for each table referenced.
When processing the result of the "impossible WHERE" the query must
send a single row of data if there are aggregate functions in it.
In this case the server marks all the aggregates as having received 
no rows and calls the relevant Item::val_xxx() method on the SELECT
list. However if this SELECT list happens to contain a correlated 
subquery this subquery is evaluated in a normal evaluation mode.
And if this correlated subquery has a reference to a field from the 
outermost "impossible where" SELECT the add_key_fields will mistakenly
consider the outer field reference as a "local" field reference when 
looking for sargable predicates.
But since the SELECT where the outer field reference refers to is not
completely initialized due to the "impossible WHERE" in this level
we'll get a NULL pointer reference.
Fixed by making a better condition for discovering if a field is "local"
to the SELECT level being processed. 
It's not enough to look for OUTER_REF_TABLE_BIT in this case since 
for outer references to constant tables the Item_field::used_tables() 
will return 0 regardless of whether the field reference is from the 
local SELECT or not.

The crash happens because select_union object is used as result set
for queries which have derived tables.
select_union use temporary table as data storage and if
fields count exceeds 10(count of values for procedure ANALYSE())
then we get a crash on fill_record() function.


mysql-test/r/analyse.result:
  test result
mysql-test/r/subselect.result:
  result fix
mysql-test/t/analyse.test:
  test case
mysql-test/t/subselect.test:
  test fix
sql/sql_yacc.yy:
  The crash happens because select_union object is used as result set
  for queries which have derived tables.
  select_union use temporary table as data storage and if
  fields count exceeds 10(count of values for procedure ANALYSE())
  then we get a crash on fill_record() function.

Updated main.mysqlbinlog_row_trans's result file as 
TRUNCATE statements are wrapped in BEGIN...COMMIT.

binlog

Mixing transactional (T) and non-transactional (N) tables on behalf of a
transaction may lead to inconsistencies among masters and slaves in STATEMENT
mode. The problem stems from the fact that although modifications done to
non-transactional tables on behalf of a transaction become immediately visible
to other connections they do not immediately get to the binary log and therefore
consistency is broken. Although there may be issues in mixing T and M tables in
STATEMENT mode, there are safe combinations that clients find useful.

In this bug, we fix the following issue. Mixing N and T tables in multi-level
(e.g. a statement that fires a trigger) or multi-table table statements (e.g.
update t1, t2...) were not handled correctly. In such cases, it was not possible
to distinguish when a T table was updated if the sequence of changes was N and T.
In a nutshell, just the flag "modified_non_trans_table" was not enough to reflect
that both a N and T tables were changed. To circumvent this issue, we check if an
engine is registered in the handler's list and changed something which means that
a T table was modified.

Check WL 2687 for a full-fledged patch that will make the use of either the MIXED or
ROW modes completely safe.

mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
  Truncate statement is wrapped in BEGIN/COMMIT.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
  Truncate statement is wrapped in BEGIN/COMMIT.

Problem was that the partition containing NULL values
was pruned away, since '2001-01-01' < '2001-02-00' but
TO_DAYS('2001-02-00') is NULL.

Added the NULL partition for RANGE/LIST partitioning on TO_DAYS()
function to be scanned too.

Also fixed a bug that added ALLOW_INVALID_DATES to sql_mode
(SELECT * FROM t WHERE date_col < '1999-99-99' on a RANGE/LIST
partitioned table would add it).

mysql-test/include/partition_date_range.inc:
  Bug#20577: Partitions: use of to_days() function leads to selection failures
  
  Added include file to decrease test code duplication
mysql-test/r/partition_pruning.result:
  Bug#20577: Partitions: use of to_days() function leads to selection failures
  
  Added test results
mysql-test/r/partition_range.result:
  Bug#20577: Partitions: use of to_days() function leads to selection failures
  
  Updated test result.
  This fix adds the partition containing NULL values to
  the list of partitions to be scanned.
mysql-test/t/partition_pruning.test:
  Bug#20577: Partitions: use of to_days() function leads to selection failures
  
  Added test case
sql/item.h:
  Bug#20577: Partitions: use of to_days() function leads to selection failures
  
  Added MONOTONIC_*INCREASE_NOT_NULL values to be used by TO_DAYS.
sql/item_timefunc.cc:
  Bug#20577: Partitions: use of to_days() function leads to selection failures
  
  Calculate the number of days as return value even for invalid dates.
  This is so that pruning can be used even for invalid dates.
sql/opt_range.cc:
  Bug#20577: Partitions: use of to_days() function leads to selection failures
  
  Fixed a bug that added ALLOW_INVALID_DATES to sql_mode
  (SELECT * FROM t WHERE date_col < '1999-99-99' on a RANGE/LIST
  partitioned table would add it).
sql/partition_info.h:
  Bug#20577: Partitions: use of to_days() function leads to selection failures
  
  Resetting ret_null_part when a single partition is to be used, this
  to avoid adding the NULL partition.
sql/sql_partition.cc:
  Bug#20577: Partitions: use of to_days() function leads to selection failures
  
  Always include the NULL partition if RANGE or LIST.
  Use the returned value for the function for pruning, even if
  it is marked as NULL, so that even '2000-00-00' can be
  used for pruning, even if TO_DAYS('2000-00-00') is NULL.
  
  Changed == to >= in get_next_partition_id_list to avoid
  crash if part_iter->part_nums is not correctly setup.