into  linux-st28.site:/home/martin/mysql/src/5.0o-bug24791


sql/field.h:
  Auto merged
sql/item_sum.cc:
  Auto merged

The problem in this bug is when we create temporary tables. When
temporary tables are created for unions, there is some 
inferrence being carried out regarding the type of the column.
Whenever this column type is inferred to be REAL (i.e. FLOAT or
DOUBLE), MySQL will always try to maintain exact precision, and
if that is not possible (there are hardware limits, since FLOAT
and DOUBLE are stored as approximate values) will switch to
using approximate values. The problem here is that at this point
the information about number of significant digits is not 
available. Furthermore, the number of significant digits should
be increased for the AVG function, however, this was not properly 
handled. There are 4 parts to the problem:

#1: DOUBLE and FLOAT fields don't display their proper display 
lengths in max_display_length(). This is hard-coded as 53 for 
DOUBLE and 24 for FLOAT. Now changed to instead return the 
field_length.

#2: Type holders for temporary tables do not preserve the 
max_length of the Item's from which they are created, and is 
instead reverted to the 53 and 24 from above. This causes 
*all* fields to get non-fixed significant digits.

#3: AVG function does not update max_length (display length)
when updating number of decimals.

#4: The function that switches to non-fixed number of 
significant digits should use DBL_DIG + 2 or FLT_DIG + 2 as 
cut-off values (Since fixed precision does not use the 'e' 
notation)

Of these points, #1 is the controversial one, but this 
change is preferred and has been cleared with Monty. The 
function causes quite a few unit tests to blow up and they had
to b changed, but each one is annotated and motivated. We 
frequently see the magical 53 and 24 give way to more relevant
numbers.


mysql-test/r/create.result:
  bug#24791
  
  changed test result
  
  With the changes made for FLOAT and DOUBLE, the original display
  lengths are now preserved.
mysql-test/r/temp_table.result:
  bug#24791
  
  changed test resullt
  
  Test case added
mysql-test/r/type_float.result:
  bug#24791
  
  changed test result
  
  delta 1: field was originally declared as DOUBLE with no display
  length, so the hardware maximum is chosen rather than 53.
  
  delta 2: fields exceed the maximum precision and thus switch to
  non-fixed significant digits
  
  delta 3: Same as above, number of decmals and significant digits
  was not specified when t3 was created.
mysql-test/t/temp_table.test:
  bug#24791
  
  Test case
sql/field.h:
  bug#24791
  
  The method max_display_length is reimplemented as
  
  uint32 max_display_length() { return field_length; }
  
  in Field_double and Field_float. Since all subclasses of 
  Field_real now have the same implementation of this method, the
  implementation has been moved up the hierarchy to Field_real.
sql/item.cc:
  bug#24791
  
  We switch to a non-fixed number of significant digits
  (by setting decimals=NOT_FIXED_DECIMAL) if the calculated 
  display length is greater than the display length of a value 
  with the maximum precision. These values differ for double and 
  float, obviously.
sql/item_sum.cc:
  bug#24791
  
  We must increase the display length accordinly whenever we 
  change number of decimal places.

of its argument happened to be a decimal expression returning
the NULL value.
The crash was due to the fact the function in_decimal::set did
not take into account that val_decimal() could return 0 if 
the decimal expression had been evaluated to NULL.  


mysql-test/r/func_in.result:
  Added a test case for bug #27362.
mysql-test/t/func_in.test:
  Added a test case for bug #27362.

into  moonbone.local:/mnt/gentoo64/work/23345-bug-5.0-opt-mysql

INTO clause can be specified only for the last select of a UNION and it
receives the result of the whole query. But it was wrongly allowed in
non-last selects of a UNION which leads to a confusing query result.

Now INTO allowed only in the last select of a UNION.


mysql-test/t/union.test:
  Added a test case for the bug#23345: Wrongly allowed INTO in a non-last select of a UNION.
mysql-test/r/union.result:
  Added a test case for the bug#23345: Wrongly allowed INTO in a non-last select of a UNION.
sql/sql_yacc.yy:
  Bug#23345: Wrongly allowed INTO in a non-last select of a UNION.
  Now INTO allowed only in the last select of a UNION.

into  olga.mysql.com:/home/igor/dev-opt/mysql-5.0-opt-bug27257


sql/item_sum.cc:
  Auto merged

aggregated in outer context returned wrong results.
This happened only if the subquery did not contain any references
to outer fields.
As there were no references to outer fields the subquery erroneously
was taken for non-correlated one.
Now any set function aggregated in outer context makes the subquery
correlated.


mysql-test/r/subselect.result:
  Added a test case for bug #27257.
mysql-test/t/subselect.test:
  Added a test case for bug #27257.

into  magare.gmz:/home/kgeorge/mysql/autopush/B24484-5.0


mysql-test/r/subselect3.result:
  Auto merged
sql/item.h:
  Auto merged
sql/item_sum.cc:
  Auto merged
sql/opt_range.cc:
  Auto merged
sql/sql_base.cc:
  Auto merged
sql/sql_class.h:
  Auto merged
sql/sql_insert.cc:
  Auto merged
sql/sql_select.cc:
  Auto merged

To correctly decide which predicates can be evaluated with a given table
the optimizer must know the exact set of tables that a predicate depends 
on. If that mask is too wide (refer to non-existing tables) the optimizer
can erroneously skip a predicate.
One such case of wrong table usage mask were the aggregate functions.
The have a all-1 mask (meaning depend on all tables, including non-existent
ones).
Fixed by making a real used_tables mask for the aggregates. The mask is
constructed in the following way :
1. OR the table dependency masks of all the arguments of the aggregate.
2. If all the arguments of the function are from the local name resolution 
  context and it is evaluated in the same name resolution
  context where it is referenced all the tables from that name resolution 
  context are OR-ed to the dependency mask. This is to denote that an
  aggregate function depends on the number of rows it processes.
3. Handle correctly the case of an aggregate function optimization (such that
  the aggregate function can be pre-calculated and made a constant).

Made sure that an aggregate function is never a constant (unless subject of a 
specific optimization and pre-calculation).  

One other flaw was revealed and fixed in the process : references were 
not calling the recalculation method for used_tables of their targets.


mysql-test/r/subselect3.result:
  Bug #24484: test case
mysql-test/t/subselect3.test:
  Bug #24484: test case
sql/item.h:
  Bug #24484: Item_ref must update the used tables.
sql/item_sum.cc:
  Bug #24484: correct calculation of used_tables for aggregates.
sql/item_sum.h:
  Bug #24484: correct calculation of used_tables for aggregates.
sql/opt_range.cc:
  Bug #24484: fixed ref resolution in loose index scan
sql/sql_base.cc:
  Bug #24484: moved counting of leaf tables inside 
  setup_tables_and_check_access.
sql/sql_class.h:
  Bug #24484: changed table count to more narrow type.
sql/sql_insert.cc:
  Bug #24484: moved counting of leaf tables inside 
  setup_tables_and_check_access. Substract the first
  table (and its subtables) of an INSERT statement
  from leaf_count.
sql/sql_select.cc:
  Bug #24484: correct check for aggregates

  Removed wrong fix for the bug#27006.
  The bug was added by the fix for the bug#19978 and fixed by Monty on 2007/02/21.
trigger.test, trigger.result:
  Corrected test case for the bug#27006.


sql/sql_insert.cc:
  Removed wrong fix for the bug#27006.
  The bug was added by the fix for the bug#19978 and fixed by Monty on 2007/02/21.
mysql-test/t/trigger.test:
  Corrected test case for the bug#27006.
mysql-test/r/trigger.result:
  Corrected test case for the bug#27006.

UPDATE if the row wasn't actually changed.

This bug was caused by fix for bug#19978. It causes AFTER UPDATE triggers
not firing if a row wasn't actually changed by the update part of the
INSERT .. ON DUPLICATE KEY UPDATE.

Now triggers are always fired if a row is touched by the INSERT ... ON
DUPLICATE KEY UPDATE.


sql/sql_insert.cc:
  Bug#27006: AFTER UPDATE triggers not fired with INSERT ... ON DUPLICATE KEY
  UPDATE if the row wasn't actually changed.
  Now triggers are always fired if a row is touched by the INSERT ... ON
  DUPLICATE KEY UPDATE.
mysql-test/r/trigger.result:
  Added a test case for the bug#27006: AFTER UPDATE triggers not fired with INSERT ... ON DUPLICATE KEY
  UPDATE if the row wasn't actually changed.
mysql-test/t/trigger.test:
  Added a test case for the bug#27006: AFTER UPDATE triggers not fired with INSERT ... ON DUPLICATE KEY
  UPDATE if the row wasn't actually changed.

into  magare.gmz:/home/kgeorge/mysql/autopush/B26261-5.0-opt


sql/mysql_priv.h:
  Auto merged
sql/sql_insert.cc:
  Auto merged
sql/sql_prepare.cc:
  Auto merged
mysql-test/r/insert_update.result:
  SCCS merged
mysql-test/t/insert_update.test:
  SCCS merged

 INSERT uses query_id to verify what fields are
 mentioned in the fields list of the INSERT command.
 However the check for that is made after the 
 ON DUPLICATE KEY is processed. This causes all
 the fields mentioned in ON DUPLICATE KEY to be 
 considered as mentioned in the fields list of 
 INSERT.
 Moved the check up, right after processing the
 fields list.


mysql-test/r/insert_update.result:
  Bug #26261: test case
mysql-test/t/insert_update.test:
  Bug #26261: test case
sql/mysql_priv.h:
  Bug #26261: moved the check inside mysql_prepare_insert
sql/sql_insert.cc:
  Bug #26261: move the check inside mysql_prepare_insert
  before setting up the ON DUPLICATE KEY part
sql/sql_prepare.cc:
  Bug #26261: moved the check inside mysql_prepare_insert

into  mysql.com:/home/gluh/MySQL/Merge/5.0-opt

The crash happens when 'skip-grant-tables' is enabled.
We skip the filling of I_S privilege tables 
if acl_cache is not initialized.


mysql-test/r/skip_grants.result:
  test result
mysql-test/t/skip_grants.test:
  test case
sql/sql_acl.cc:
  skip filling of I_S privilege tables
  if acl_cache is not initialized

into  mysql.com:/home/hf/work/mrg/mysql-5.0-opt

into  mysql.com:/home/hf/work/mrg/mysql-5.0-opt


sql/sql_parse.cc:
  Auto merged

into  mysql.com:/home/svoj/devel/bk/mysql-5.0-engines

into  moonbone.local:/mnt/gentoo64/work/27033-bug-5.0-opt-mysql

touched but not actually changed.

The LAST_INSERT_ID() is reset to 0 if no rows were inserted or changed.
This is the case when an INSERT ... ON DUPLICATE KEY UPDATE updates a row
with the same values as the row contains.

Now the LAST_INSERT_ID() values is reset to 0 only if there were no rows
successfully inserted or touched.
The new 'touched' field is added to the COPY_INFO structure. It holds the
number of rows that were touched no matter whether they were actually
changed or not.


sql/sql_class.h:
  Bug#27033: 0 as LAST_INSERT_ID() after INSERT .. ON DUPLICATE if rows were
  touched but not actually changed.
  
  The new 'touched' field is added to the COPY_INFO structure. It holds the
  number of rows that were touched no matter whether they were actually
  changed or not.
mysql-test/r/insert_update.result:
  Added a test case for the bug#27033: 0 as LAST_INSERT_ID() after INSERT .. ON DUPLICATE if rows were
  touched but not actually changed.
mysql-test/t/insert_update.test:
  Added a test case for the bug#27033: 0 as LAST_INSERT_ID() after INSERT .. ON DUPLICATE if rows were
  touched but not actually changed.
sql/sql_insert.cc:
  Bug#27033: 0 as LAST_INSERT_ID() after INSERT .. ON DUPLICATE if rows were
  touched but not actually changed.
  
  Now the LAST_INSERT_ID() values is reset to 0 only if there were no rows
  successfully inserted or touched.

into  mysql.com:/home/hf/work/mrg/mysql-5.0-opt


sql/sql_parse.cc:
  Auto merged

into  mysql.com:/home/hf/work/mrg/mysql-5.0-opt


mysql-test/r/gis-rtree.result:
  Auto merged

into  mockturtle.local:/home/dlenev/src/mysql-4.1-merge

into  mockturtle.local:/home/dlenev/src/mysql-5.0-merge

into  mockturtle.local:/home/dlenev/src/mysql-5.0-bg25966-2


sql/mysqld.cc:
  Auto merged

TABLE ... WRITE".

Memory and CPU hogging occured when connection which had to wait for table
lock was serviced by thread which previously serviced connection that was
killed (note that connections can reuse threads if thread cache is enabled).
One possible scenario which exposed this problem was when thread which
provided binlog dump to replication slave was implicitly/automatically
killed when the same slave reconnected and started pulling data through
different thread/connection.
The problem also occured when one killed particular query in connection
(using KILL QUERY) and later this connection had to wait for some table
lock.

This problem was caused by the fact that thread-specific mysys_var::abort
variable, which indicates that waiting operations on mysys layer should
be aborted (this includes waiting for table locks), was set by kill
operation but was never reset back. So this value was "inherited" by the
following statements or even other connections (which reused the same
physical thread). Such discrepancy between this variable and THD::killed
flag broke logic on SQL-layer and caused CPU and memory hogging.

This patch tries to fix this problem by properly resetting this member.

There is no test-case associated with this patch since it is hard to test
for memory/CPU hogging conditions in our test-suite.


sql/mysqld.cc:
  We should not forget to reset THD::mysys_var::abort after kill operation
  if we are going to use thread to which this operation was applied for
  handling of other connections.
sql/sp_head.cc:
  We should not forget to reset THD::mysys_var::abort after kill operation
  if we are going to use thread to which this operation was applied for
  handling of further statements.
sql/sql_parse.cc:
  We should not forget to reset THD::mysys_var::abort after kill operation
  if we are going to use thread to which this operation was applied for
  handling of further statements.

TABLE ... WRITE".

CPU hogging occured when connection which had to wait for table lock was
serviced by thread which previously serviced connection that was killed
(note that connections can reuse threads if thread cache is enabled).
One possible scenario which exposed this problem was when thread which
provided binlog dump to replication slave was implicitly/automatically
killed when the same slave reconnected and started pulling data through
different thread/connection.
In 5.* versions memory hogging was added to CPU hogging. Moreover in
those versions the problem also occured when one killed particular query
in connection (using KILL QUERY) and later this connection had to wait for
some table lock.

This problem was caused by the fact that thread-specific mysys_var::abort
variable, which indicates that waiting operations on mysys layer should
be aborted (this includes waiting for table locks), was set by kill
operation but was never reset back. So this value was "inherited" by the
following statements or even other connections (which reused the same
physical thread). Such discrepancy between this variable and THD::killed
flag broke logic on SQL-layer and caused CPU and memory hogging.

This patch tries to fix this problem by properly resetting this member.

There is no test-case associated with this patch since it is hard to test
for memory/CPU hogging conditions in our test-suite.


sql/mysqld.cc:
  We should not forget to reset THD::mysys_var::abort after kill operation
  if we are going to use thread to which this operation was applied for
  handling of other connections.

into  mysql.com:/home/kent/bk/tmp/mysql-5.0-build

into  mysql.com:/home/kent/bk/tmp/mysql-4.1-build

  Updated to version 0.6 of the text


EXCEPTIONS-CLIENT:
  Updated to version 0.6 of the text

into  mysql.com:/home/kent/bk/tmp/mysql-5.0-build


configure.in:
  Auto merged

into  mysql.com:/home/kent/bk/tmp/mysql-5.0-build

into  mysql.com:/home/kent/bk/tmp/mysql-4.1-build

into  mysql.com:/home/kent/bk/tmp/mysql-4.1-build


configure.in:
  SCCS merged

  Added test for sched_yield() possibly in -lposix4 on Solaris


configure.in:
  Added test for sched_yield() possibly in -lposix4 on Solaris

into  magare.gmz:/home/kgeorge/mysql/autopush/B26794-5.0-opt


sql/field.cc:
  Auto merged

Different set of conditions is used to verify
the validity of index definitions over a GEOMETRY
column in ALTER TABLE and CREATE TABLE. 
The difference was on how sub-keys notion validity
is checked.
Fixed by extending the CREATE TABLE condition to
support the cases allowed in ALTER TABLE.
Made the SHOW CREATE TABLE not to display spatial
indexes using the sub-key notion.


mysql-test/r/alter_table.result:
  Bug #26794: test case
mysql-test/r/gis-rtree.result:
  Bug #26794: fixed SHOW CREATE TABLE output.
mysql-test/t/alter_table.test:
  Bug #26794: test case
sql/field.cc:
  Bug #26794: Allow sub-keys for GEOMETRY
sql/sql_show.cc:
  Bug #26794: Don't show sub-key notion 
   in SHOW CREATE TABLE for SPATIAL indexes.
sql/sql_table.cc:
  Bug #26794: Allow sub-keys for GEOMETRY