this is CentOOOOOOS 7

The reason for the crash was a bug in MDEV-19275, after which shutdown
does not wait for binlog threads anymore.

Error C2440	'initializing': cannot convert from 'MYSQL_RES *(__stdcall *)(MYSQL *)' to 'MYSQL_RES *(__cdecl *)(MYSQL *)'

This implements memory transaction support for:

* Intel Restricted Transactional Memory (RTM), also known as TSX-NI
(Transactional Synchronization Extensions New Instructions)
* POWER v2.09 Hardware Trace Monitor (HTM) on GNU/Linux

transactional_lock_guard, transactional_shared_lock_guard:
RAII lock guards that try to elide the lock acquisition
when transactional memory is available.

buf_pool.page_hash: Try to elide latches whenever feasible.
Related to the InnoDB change buffer and ROW_FORMAT=COMPRESSED
tables, this is not always possible.
In buf_page_get_low(), memory transactions only work reasonably
well for validating a guessed block address.

TMLockGuard, TMLockTrxGuard, TMLockMutexGuard: RAII lock guards
that try to elide lock_sys.latch and related latches.

Since commit bd5a6403 (MDEV-26033)
we can actually calculate the buf_pool.page_hash cell and latch
addresses while not holding buf_pool.mutex.

buf_page_alloc_descriptor(): Remove the MEM_UNDEFINED.
We now expect buf_page_t::hash to be zero-initialized.

buf_pool_t::hash_chain: Dedicated data type for buf_pool.page_hash.array.

buf_LRU_free_one_page(): Merged to the only caller
buf_pool_t::corrupted_evict().

page_hash_latch: Only use the spinlock implementation on
SUX_LOCK_GENERIC platforms (those for which we do not implement
a futex-like interface). Use srw_spin_mutex on 32-bit systems
(except Microsoft Windows) to satisfy the size constraints.

rw_lock::is_read_locked(): Remove. We will use the slightly
broader assertion is_locked().

srw_lock_: Implement is_locked(), is_write_locked() in a hacky
way for the Microsoft Windows SRWLOCK. This should be acceptable,
because we are only using these predicates in debug assertions
(or later, in lock elision), and false positives should not matter.

In a stress test campaign of a 10.6-based branch by Matthias Leich,
a deadlock between two InnoDB threads occurred, involving
lock_sys.wait_mutex and a dict_table_t::lock_mutex.

The cause of the hang is a latching order violation in
lock_sys_t::cancel(). That function and the latching order
violation were originally introduced in
commit 8d16da14 (MDEV-24789).

lock_sys_t::cancel(): Invoke table->lock_mutex_trylock() in order
to avoid a deadlock. If that fails, release lock_sys.wait_mutex,
and acquire both latches. In that way, we will be obeying the
latching order and no hangs will occur.

This hang should mostly affect DDL operations. DML operations will
acquire only IX or IS table locks, which are compatible with each other.

page_create_low(): Fix -Warray-bounds

log_buffer_extend(): Fix -Wstringop-overflow

Based on mysql/mysql-server@bc9c46bf2894673d0df17cd0ee872d0d99663121
but without sleeps.

The test was verified to hit the debug assertion if the change to
fts_add_doc_by_id() in commit 2d98b967
was reverted.

fts_cache_t::total_size_at_sync: New field, to sample total_size.

fts_add_doc_by_id(): Invoke sync if total_size has grown too much
since the previous sync request. (Maintain cache->total_size_at_sync.)

ib_wqueue_t::length: Caches ib_list_len(*items).

ib_wqueue_len(): Removed. We will refer to fts_optimize_wq->length
directly.

Based on mysql/mysql-server@bc9c46bf2894673d0df17cd0ee872d0d99663121

trx_commit_in_memory(): Do not release the rseg reference before
trx_undo_commit_cleanup() has been invoked and the current transaction
is truly done with the rollback segment. The purpose of the reference
count is to prevent data races with trx_purge_truncate_history().

This is based on
mysql/mysql-server@ac79aa1522f33e6eb912133a81fa2614db764c9c.

InnoDB commit fails when consecutive FTS_DOC_ID value
is greater than 4294967295.
Fix is that InnoDB should remove the delta FTS_DOC_ID
value limitations and fts should encode 8 byte value,
remove FTS_DOC_ID_MAX_STEP variable. Replaced the
fts0vlc.ic file with fts0vlc.h

fts_encode_int(): Should be able to encode 10 bytes value

fts_get_encoded_len(): Should get the length of the value
which has 10 bytes

fts_decode_vlc(): Add debug assertion to verify the maximum
length allowed is 10.

mach_read_uint64_little_endian(): Reads 64 bit stored in
little endian format

Added a unit test case which check for minimum and maximum
value to do the fts encoding

In commit 1811fd51 the assertion
should have said error_reported instead of !error_reported.
But, that revised assertion would still fail in main.defaults
where ER_BAD_DATA is reported during CREATE TABLE.

Assertion `!pk->has_virtual()' failed in dict_index_build_internal_clust
while creating PRIMARY key longer than possible to store in the page.

This happened because the key was wrongly deduced as Long UNIQUE supported,
however PRIMARY KEY cannot be of that type. The main reason is that
only 8 bytes are used to store the hash, see HA_HASH_FIELD_LENGTH.

This is also why HA_NOSAME flag is removed (and caused the assertion in
turn) in open_table_from_share:
      if (key_info->algorithm == HA_KEY_ALG_LONG_HASH)
      {
        key_part_end++;
        key_info->flags&= ~HA_NOSAME;
      }

To make it unique, the additional check is done by
check_duplicate_long_entries call from ha_write_row, and similar one from
ha_update_row.

PRIMARY key is already forbidden, which is checked by the first test in
main.long_unique, however is_hash_field_needed was wrongly deduced to true
in mysql_prepare_create_table in this particular case.

FIX:

* Improve the check for Key::PRIMARY type
* Simplify is_hash_field_needed deduction for a more neat reading

create_table_info_t::innobase_table_flags(): Refuse to create
a PAGE_COMPRESSED table with PAGE_COMPRESSION_LEVEL=0 if also
innodb_compression_level=0.

The parameter value innodb_compression_level=0 was only somewhat
meaningful for testing or debugging ROW_FORMAT=COMPRESSED tables.
For the page_compressed format, it never made any sense, and the
check in dict_tf_is_valid_not_redundant() that was added in
72378a25 (MDEV-12873) would cause
the server to crash.

The assertion is absolutely correct since no data access is possible after
XA PREPARE.

The check is added in mysql_ha_read.

This is a duplicate of MDEV-18278 89936f11, but I will add an
additional assertion

Description:

The frm corruption should not be reported during CREATE TABLE. Normally
it doesn't, and the data to fill TABLE is taken by open_table_from_share
call. However, the vcol data is stored as SQL string in
table->s->vcol_defs.str and is anyway parsed on each table open.
It is impossible [or hard] to avoid, because it's hard to clone the
expression tree in general (it's easier to parse).

Normally parse_vcol_defs should only fail on semantic errors. If so,
error_reported is set to true. Any other failure is not expected during
table creation. There is either unhandled/unacknowledged error, or
something went really wrong, like memory reject. This all should be
asserted anyway.

Solution:
* Set *error_reported=true for the forward references check;
* Assert for every unacknowledged error during table creation.

MDEV-26647 (reuse info) Include password validation plugin information in the error message if the SQL statement is not satisfied password policy

send information about password reusing

MySQL-5.7 mysql.user tables have a last_password_changed field.

Because before MariaDB-10.4 remained oblivious to this, the act of creating
users or otherwise changing a users row left the last_password_field with 0.

Running a MariaDB-10.4 instance on this would work correctly, until mysql_upgrade
is run, when this 0 value immediately translates to password expired
state.

MySQL-5.7 relied on the password_expired enum to indicate password
expiry so we aren't going to activate password that were expired in
MySQL-5.7.

Thanks Hans Borresen for the bug report and review of the fix.

ha_innobase::delete_table(): When the table that is being dropped
has a name starting with #sql, temporarily set
innodb_lock_wait_timeout=0 while attempting to lock the
persistent statistics tables. If the statistics tables cannot be locked,
pretend that statistics did not exist and carry on with dropping
the table. The SQL layer is not really prepared for failures of
this operation. This is what fixes the test case.

ha_innobase::rename_table(): When renaming a table from a name
that starts with #sql, try to lock the statistics tables with an
immediate timeout, and ignore the statistics if the locks were
not available. In fact, during any rename from a #sql name,
dict_stats_rename_table() should have no effect, because already
when an earlier rename to a #sql name took place we should have
deleted the statistics for the table using the non-#sql name.
This change is just analogous to the ha_innobase::delete_table().

MIPS (and possibly other) platforms require linking against libatomic to
support 64-bit atomic integers. Groonga was failing to do so and all related
tests were failing with an atomics relocation error on MIPS.

Contributors:
James Cowgill <jcowgill@debian.org>

fixed execution inside the prepared statement.