Currently, SST scripts assume that the filename specified in
the --log-bin-index argument either does not contain an extension
or uses the standard ".index" extension. Similar assumptions are
used for the log_bin_index parameter read from the configuration
file. This commit adds support for arbitrary extensions for the
index file paths.

If the server is started with the --innodb-force-recovery argument
on the command line, then during SST this argument can be passed to
mariabackup only at the --prepare stage, and accordingly it must be
removed from the --mysqld-args list (and it is not should be passed
to mariabackup otherwise).

This commit fixes a flaw in the SST scripts and add a test that
checks the ability to run the joiner node in a configuration that
uses --innodb-force-recovery=1.

This bug led to reporting bogus messages "No database selected" for DELETE
statements if they used subqueries in their WHERE conditions and these
subqueries contained references to CTEs.
The bug happened because the grammar rule for DELETE statement did not
call the function LEX::check_cte_dependencies_and_resolve_references() and
as a result of it references to CTEs were not identified as such.

Approved by Oleksandr Byelkin <sanja@mariadb.com>

This bug concerned only CREATE TABLE statements of the form
  CREATE TABLE <table name> AS <with clause> <union>.
For such a statement not all references to CTE used in <union> were resolved.
As a result a bogus message was reported for the first unresolved reference.
This happened because for such statements the function resolving references
to CTEs LEX::check_cte_dependencies_and_resolve_references() was called
prematurely in the parser.

Approved by Oleksandr Byelkin <sanja@mariadb.com>

Remove section that was trying to rename default-character-set to character-set-server

This seems to be an old workaround for some upgrade warning, which did not
work for some time already, because the ini filename was not initialized.

fil_space_decrypt(): change signature to return status via dberr_t only.
Also replace impossible condition with an assertion and prove it via
test cases.

  This bug affected queries with two or more references to a CTE referring
another CTE if the definition of the latter contained an invocation of
a stored function that used a base table. The bug could lead to a bogus
error message or to an assertion failure.
  For any non-first reference to CTE cte1 With_element::clone_parsed_spec()
is called that parses the specification of cte1 to construct the unit
structure for this usage of cte1. If cte1 refers to another CTE cte2
outside of the specification of cte1 then With_element::clone_parsed_spec()
has to be called for cte2 as well. This call is made by the function
LEX::resolve_references_to_cte() within the invocation of the function
With_element::clone_parsed_spec() for cte1.
  When the specification of a CTE is parsed all table references encountered
in it must be added to the global list of table references for the query.
As the specification for the non-first usage of a CTE is parsed at a
recursive call of the parser the function With_element::clone_parsed_spec()
invoked at this recursive call should takes care of appending the list of
table references encountered in the specification of this CTE cte1 to the
list of table references created for the query. And it should do it after
the call of LEX::resolve_references_to_cte() that resolves references to
CTEs defined outside of the specification of cte1 because this call may
invoke the parser again for specifications of other CTEs and  the table
references from their specifications must ultimately appear in the global
list of table references of the query.
  The code of With_element::clone_parsed_spec() misplaced the call of
LEX::resolve_references_to_cte(). As a result LEX::query_tables_last used
for the query that was supposed to point to the field 'next_global' of the
last element in the global list of table references actually pointed to
'next_global' of the previous element.
  The above inconsistency certainly caused serious problems when table
references used in the stored functions invoked in cloned specifications
of CTEs were added to the global list of table references.

Upon investigation, decided this to be a compiler bug
(happens with new compiler, on code that did not change for the last 15 years)

Fixed by de-optimizing single function remove_key(), using MSVC pragma

MDEV-26991: CURRENT_TEST: main.mysql_binary_zero_insert 'grep' is not recognized as an internal or external command, operable program or batch file.

Removed grep from mysqldump command stream and instead,
extend the search_file pattern to search for rows containing
binary zeros instead of any occurance of '00' in the input

This fixes up commit d22c8cae

The previous threads locked need to be released too.

This occurs if the initialization of any of the non-first
mutex/conditition variables errors occurs.

Fix a bug of unreleased lock ctrl_mutex in the method create_worker_threads

added summary/description per package.

When transaction creates or drops temporary tables and afterward its statement
faces an error even the transactional table statement's cached ROW
format events get involved into binlog and are visible after the transaction's commit.

Fixed with proper analysis of whether the errored-out statement needs
to be rolled back in binlog.
For instance a fact of already cached CREATE or DROP for temporary
tables by previous statements alone
does not cause to retain the being errored-out statement events in the
cache.
Conversely, if the statement creates or drops a temporary table
itself it can't be rolled back - this rule remains.

This reverts commit 5d6f3ceb.

When restoring lastinx last_key.keyinfo must be updated as well. The
good example is in _ma_check_index().

The point of failure is extra(HA_EXTRA_NO_KEYREAD) in
ha_maria::get_auto_increment():

  1. extra(HA_EXTRA_KEYREAD) saves lastinx;
  2. maria_rkey() changes index, so the lastinx and last_key.keyinfo;
  3. extra(HA_EXTRA_NO_KEYREAD) restores lastinx but not
     last_key.keyinfo.

So we have discrepancy between lastinx and last_key.keyinfo after 3.

Use better error message when KILL fails even in case TOI
fails.

my_copy_fix_mb() passed MIN(src_length,dst_length) to
my_append_fix_badly_formed_tail(). It could break a multi-byte
character in the middle, which put the question mark to the
destination.

Fixing the code to pass the true src_length to
my_append_fix_badly_formed_tail().

* Fix error handling NULL-pointer reference
* Add mtr-suppression on galera_ssl_upgrade

There is a server startup option --gdb a.k.a. --debug-gdb that requests
signals to be set for more convenient debugging. Most notably, SIGINT
(ctrl-c) will not be ignored, and you will be able to interrupt the
execution of the server while GDB is attached to it.

When we are debugging, the signal handlers that would normally display
a terse stack trace are useless.

When we are debugging with rr, the signal handlers may interfere with
a SIGKILL that could be sent to the process by the environment, and ruin
the rr replay trace, due to a Linux kernel bug
https://lkml.org/lkml/2021/10/31/311

To be able to diagnose bugs in kill+restart tests, we may really need
both a trace before the SIGKILL and a trace of the failure after a
subsequent server startup. So, we had better avoid hitting the problem
by simply not installing those signal handlers.

MDEV-24901 SIGSEGV in fts_get_table_name, SIGSEGV in ib_vector_size, SIGSEGV in row_merge_fts_doc_tokenize, stack smashing

strmake() puts one extra 0x00 byte at the end of the string.
The code in my_strnxfrm_tis620[_nopad] did not take this into
account, so in the reported scenario the 0x00 byte was put outside
of a stack variable, which made ASAN crash.

This problem is already fixed in in MySQL:

  commit 19bd66fe43c41f0bde5f36bc6b455a46693069fb
  Author: bin.x.su@oracle.com <>
  Date:   Fri Apr 4 11:35:27 2014 +0800

But the fix does not seem to be correct, as it breaks when finds a zero byte
in the source string.

Using memcpy() instead of strmake().

- Unlike strmake(), memcpy() it does not write beyond the destination
  size passed.
- Unlike the MySQL fix, memcpy() does not break on the first 0x00 byte found
  in the source string.

Mutex order violation when wsrep bf thread kills a conflicting trx,
the stack is

          wsrep_thd_LOCK()
          wsrep_kill_victim()
          lock_rec_other_has_conflicting()
          lock_clust_rec_read_check_and_lock()
          row_search_mvcc()
          ha_innobase::index_read()
          ha_innobase::rnd_pos()
          handler::ha_rnd_pos()
          handler::rnd_pos_by_record()
          handler::ha_rnd_pos_by_record()
          Rows_log_event::find_row()
          Update_rows_log_event::do_exec_row()
          Rows_log_event::do_apply_event()
          Log_event::apply_event()
          wsrep_apply_events()

and mutexes are taken in the order

          lock_sys->mutex -> victim_trx->mutex -> victim_thread->LOCK_thd_data

When a normal KILL statement is executed, the stack is

          innobase_kill_query()
          kill_handlerton()
          plugin_foreach_with_mask()
          ha_kill_query()
          THD::awake()
          kill_one_thread()

        and mutexes are

          victim_thread->LOCK_thd_data -> lock_sys->mutex -> victim_trx->mutex

This patch is the plan D variant for fixing potetial mutex locking
order exercised by BF aborting and KILL command execution.

In this approach, KILL command is replicated as TOI operation.
This guarantees total isolation for the KILL command execution
in the first node: there is no concurrent replication applying
and no concurrent DDL executing. Therefore there is no risk of
BF aborting to happen in parallel with KILL command execution
either. Potential mutex deadlocks between the different mutex
access paths with KILL command execution and BF aborting cannot
therefore happen.

TOI replication is used, in this approach,  purely as means
to provide isolated KILL command execution in the first node.
KILL command should not (and must not) be applied in secondary
nodes. In this patch, we make this sure by skipping KILL
execution in secondary nodes, in applying phase, where we
bail out if applier thread is trying to execute KILL command.
This is effective, but skipping the applying of KILL command
could happen much earlier as well.

This also fixed unprotected calls to wsrep_thd_abort
that will use wsrep_abort_transaction. This is fixed
by holding THD::LOCK_thd_data while we abort transaction.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>

Revert "MDEV-23328 Server hang due to Galera lock conflict resolution"

This reverts commit 29bbcac0.

When transaction creates or drops temporary tables and afterward its statement
faces an error even the transactional table statement's cached ROW
format events get involved into binlog and are visible after the transaction's commit.

Fixed with proper analysis of whether the errored-out statement needs
to be rolled back in binlog.
For instance a fact of already cached CREATE or DROP for temporary
tables by previous statements alone
does not cause to retain the being errored-out statement events in the
cache.
Conversely, if the statement creates or drops a temporary table
itself it can't be rolled back - this rule remains.

rpl_get_master_version_and_clock and rpl_row_big_table_id tests are slow, so let's not run them under valgrind

Those messages don't indicate errors, they should be normal warnings.

The InnoDB changes in MySQL 5.7.36 that were applicable to MariaDB
were covered by MDEV-26864, MDEV-26865, MDEV-26866.