Backport from 10.6

Adds reload and --datadir functionality to mysqld_multi
Increased version to 3.0

Source:
https://github.com/openSUSE/mysql-packaging/blob/master/patches/mysql-patches/mariadb-10.0.15-mysqld_multi-features.patch

Author: Michal Hrusecky <Michal.Hrusecky@opensuse.org>
Reviewer: monty@mariadb.org

This patch fixes the logrotate config file for mariadb.
Read more at https://www.novell.com/support/kb/doc.php?id=7005219

Source:
https://github.com/openSUSE/mysql-packaging/blob/master/patches/mysql-patches/mariadb-10.0.15-logrotate-su.patch

Suggested by serg@mariadb.org

MDEV-20770 Server crashes in JOIN::transform_in_predicates_into_in_subq upon 2nd execution of PS/SP comparing GEOMETRY with other types.

The Item_in_subselect::in_strategy keeps the value and as the error
happens the condition isn't modified. That leads to wrong ::fix_fields
execution on second PS run. Also the select->table_list is merged
but not restored if an error happens, which causes hanging loops on
the third PS execution.

This bug may affect the queries that uses a grouping derived table with
grouping list containing references to columns from different tables if
the optimizer decides to employ the split optimization for the derived
table. In some very specific cases it may affect queries with a grouping
derived table that refers only one base table.
This bug was caused by an improper fix for the bug MDEV-25128. The fix
tried to get rid of the equality conditions pushed into the where clause
of the grouping derived table T to which the split optimization had been
applied. The fix erroneously assumed that only those pushed equalities
that were used for ref access of the tables referenced by T were needed.
In fact the function remove_const() that figures out what columns from the
group list can be removed if the split optimization is applied can uses
other pushed equalities as well.
This patch actually provides a proper fix for MDEV-25128. Rather than
trying to remove invalid pushed equalities referencing the fields of SJM
tables with a look-up access the patch attempts not to push such equalities.

Approved by Oleksandr Byelkin <sanja@mariadb.com>

Removing DEFAULT from INFORMATION_SCHEMA columns.
DEFAULT in read-only tables is rather meaningless.
Upgrade should go smoothly.

Also fixes:
 MDEV-20254 Problems with EMPTY_STRING_IS_NULL and I_S tables

MDEV-26768 Spider table crashes the server after the mysql_list_fields() client's call and produces weird result for SHOW FIELDS.

Suppress errors in ha_spider::info() called from mysqld_show_fields()

The problem affected queries in form:

  SELECT FROM (SELECT where Split Materialized is applicable) WHERE 1=0

The problem was caused by this:
- The select in derived table uses two-phase optimization (due to a
  possible Split Materialized).
- The primary select has "Impossible where" and so it short-cuts its
  optimization.
- The optimization for the SELECT in the derived table is never finished,
  and EXPLAIN data structure has a dangling pointer to select #2.

Fixed with this: make JOIN::optimize_stage2() invoke optimization of
derived tables when it is handing a degenerate JOIN with zero tables.
We will not execute the derived tables but we need their query plans
for [SHOW]EXPLAIN.

The change was because of new rocksdb error message.

This bug could affect queries with a grouping derived table containing
equalities in the where clause of its specification if the optimizer
chose to apply split optimization to access the derived table. In such
cases wrong results could be returned from the queries.
When the optimizer considers a possibility of using split optimization
to a derived table it injects equalities joining the derived table with
other tables into the where condition of the derived table. After the join
order for the execution using split optimization has been chosen as the
cheapest the injected equalities that are not used to access the derived
table are removed from the where condition of the derived table.
For this removal the optimizer looks through the conjuncts of the where
condition of the derived table, fetches the equalities and checks whether
they belong to the list of injected equalities.
As the injection of the list was performed just by the insertion of it
into the list of top level AND condition of the where condition some extra
conjuncts from the where condition could be automatically attached to the
end of the list of injected equalities. If such attached conjunct happened
to be an equality predicate it was removed from the where condition of the
derived table and thus lost for checking at the execution phase.
The bug has been fixed by injecting of a shallow copy of the list of the
pushed equalities rather than the list itself leaving the latter intact.

Approved by Oleksandr Byelkin <sanja@mariadb.com>

Handler error codes in storage engine may change as they depend on
volatile HA_ERR_LAST.

First, we do not add VERS_UPDATE_UNVERSIONED_FLAG for system field and
that fixes SHOW CREATE result.

Second, we have to call check_sys_fields() for any CREATE TABLE and
there correct type is checked for system fields.

Third, we update system_time like as_row structures for ALTER TABLE
and that makes check_sys_fields() happy for ALTER TABLE when we make
system fields hidden.

Update was skipped (need_update was false) because compare_record()
used HA_PARTIAL_COLUMN_READ branch and it skipped row_start check
has_explicit_value() was false. When we set bit for row_start in
has_value_set the row is updated with new row_start value.

The bug was caused by combination of MDEV-23446 and 3789692d. The
latter one says:

  ... But generated columns that are written to the table are always
  deterministic and cannot change unless normal non-generated columns
  were changed. ...

Since MDEV-23446 generated row_start can change while non-generated
columns are not changed.

Explicit value flag came from HAS_EXPLICIT_DEFAULT which was used to
distinguish default-generated value from user-supplied one.

ha_partition::start_stmt() continued processing in error state. Though
no known bug cases yet it seems break was made incorrect by
f93a2a3b (2016) while originally break was ok since cd483c55
(2005).

LIMIT history switching requires the number of history partitions to
be marked for read: from first to last non-empty plus one empty. The
least we can do is to fail with error message if the needed partition
was not marked for read. As this is handler interface we require new
handler error code to display user-friendly error message.

Switching by INTERVAL works out-of-the-box with
ER_ROW_DOES_NOT_MATCH_GIVEN_PARTITION_SET error.

Merged truncate_privilege and sysvars-notembedded into not_embedded.test
Merged partition_innodb into trx_id.test

MDEV-26337: subquery with groupby and ROLLUP returns incorrect results on LEFT JOIN on INDEXED values

Disable LATERAL DERIVED optimization for subqueries that have WITH ROLLUP.

This bug could affect queries with grouping derived tables / views / CTEs
with ROLLUP. The bug could manifest itself if the corresponding
materialized derived tables are subject to split optimization.

The current implementation of the split optimization produces rows
from the derived table in an arbitrary order. So these rows must be
accumulated in another temporary table and sorted according to the
used GROUP BY clause in order to be able to generate the additional
ROLLUP rows.

This patch prohibits to use split optimization for grouping derived
tables / views / CTEs with ROLLUP.

Add SYSTEMD_READWRITEPATH-variable to mariadb{@,}.service.in to make sure that
if one is not building RPM or DEB packages then make sure there is ReadWritePaths
directive is defined in systemd service file.

This ensures that tar-ball installation has permissions to write database default
installation path (default: /usr/local/mysql/data) even if it's located
under /usr. Writing to that location is prevented by 'ProtectSystem=full'
systemd directive by default.

Prefixing the path with "-" in systemd causes there to not be an error if the
path doesn't exist. This may occur if the user has configured a datadir
elsewhere.

Reviewer: Daniel Black

CREATE-OR-REPLACE SEQUENCE is not logged with Gtid event DDL flag
which affects its slave parallel execution.
Unlike other DDL:s it can occur in concurrent execution with following transactions
which can lead to various errors, including asserts like

(mdl_request->type != MDL_INTENTION_EXCLUSIVE && mdl_request->type != MDL_EXCLUSIVE) || !(get_thd()->rgi_slave && get_thd()->rgi_slave->is_parallel_exec && lock->check_if_conflicting_replication_locks(this)

in MDL_context::acquire_lock.

Fixed to wrap internal statement level commit with save-
and-restore of TRANS_THD::m_unsafe_rollback_flags.

This code piece is adapted from https://github.com/KDE/krita/blob/451e1415fd1b3a0f9c24de2fd4707d1b1e164236/cmake/modules/CheckAtomic.cmake#L23

Fixes: f502ccbc
Fixes: https://bugs.gentoo.org/828065Tested-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Daniel Black

This is the first part of the fixes for MDEV-24097. This commit
contains the fixes for instability when testing Galera and when
restarting nodes quickly:

1) Protection against a "stuck" old SST process during the execution
   of the new SST (after restarting the node) is now implemented for
   mariabackup / xtrabackup, which should help to avoid almost all
   conflicts due to the use of the same ports - both during testing
   with mtr, so and when restarting nodes quickly in a production
   environment.
2) Added more protection to scripts against unexpected return of
   the rc != 0 (in the commands for deleting temporary files, etc).
3) Added protection against unexpected crashes during binlog transfer
   (in SST scripts for rsync).
4) Spaces and some special characters in binlog filenames shouldn't
   be a problem now (at the script level).
5) Daemon process termination tracking has been made more robust
   against crashes due to unexpected termination of the previous SST
   process while new scripts are running.
6) Reading ssl encryption parameters has been moved from specific
   SST scripts to a common wsrep_sst_common.sh script, which allows
   unified error handling, unified diagnostics and simplifies script
   revisions in the future.
7) Improved diagnostics of errors related to the use of openssl.
8) Corrections have been made for xtrabackup-v2 (both in tests and in
   the script code) that restore the work of xtrabackup with updated
   versions of innodb.
9) Fixed some tests for galera_3nodes, although the complete solution
   for the problem of starting three nodes at the same time on fast
   machines will be done in a separate commit.

No additional tests are required as this commit fixes problems with
existing tests.

Small postfix to MDEV-23175 to ensure faster option on FreeBSD
and compatibility to Solaris that isn't high resolution.

ftime is left as a backup in case an implementation doesn't
contain any of these clocks.

FreeBSD
    $ ./unittest/mysys/my_rdtsc-t
    1..11
    # ----- Routine ---------------
    # myt.cycles.routine          :             5
    # myt.nanoseconds.routine     :            11
    # myt.microseconds.routine    :            13
    # myt.milliseconds.routine    :            11
    # myt.ticks.routine           :            17
    # ----- Frequency -------------
    # myt.cycles.frequency        :    3610295566
    # myt.nanoseconds.frequency   :    1000000000
    # myt.microseconds.frequency  :       1000000
    # myt.milliseconds.frequency  :           899
    # myt.ticks.frequency         :           136
    # ----- Resolution ------------
    # myt.cycles.resolution       :             1
    # myt.nanoseconds.resolution  :             1
    # myt.microseconds.resolution :             1
    # myt.milliseconds.resolution :             7
    # myt.ticks.resolution        :             1
    # ----- Overhead --------------
    # myt.cycles.overhead         :            26
    # myt.nanoseconds.overhead    :         19140
    # myt.microseconds.overhead   :         19036
    # myt.milliseconds.overhead   :           578
    # myt.ticks.overhead          :         21544
    ok 1 - my_timer_init() did not crash
    ok 2 - The cycle timer is strictly increasing
    ok 3 - The cycle timer is implemented
    ok 4 - The nanosecond timer is increasing
    ok 5 - The nanosecond timer is implemented
    ok 6 - The microsecond timer is increasing
    ok 7 - The microsecond timer is implemented
    ok 8 - The millisecond timer is increasing
    ok 9 - The millisecond timer is implemented
    ok 10 - The tick timer is increasing
    ok 11 - The tick timer is implemented

The old code erroneously used default_charset_info to compare field names.
default_charset_info can point to any arbitrary collation,
including ucs2*, utf16*, utf32*, including those that do not
support strcasecmp().

my_charset_utf8mb4_unicode_ci, which is used in this scenario:

CREATE TABLE t1 ENGINE=InnoDB WITH SYSTEM VERSIONING AS SELECT 0;

does not support strcasecmp().

Fixing the code to use Lex_ident::streq(), which uses
system_charset_info instead of default_charset_info.

Since commit fb335b48 we may have
a null pointer in purge_sys.query when fetch_data_into_cache() is
invoked and innodb_force_recovery>4. This is because the call to
purge_sys.create() would be skipped.

fetch_data_into_cache(): Load the purge_sys pseudo transaction pointer
to a local variable (null pointer if purge_sys is not initialized).

1) Removed symlinks that are not very well supported in tar under Windows.
2) Added comment + changed code formatting in viosslfactories.c
3) Fixed a small bug in the yassl code.
4) Fixed a typo in the script code.

MDEV-25803 excluded some cases from key sort upon alter table. That
particularly depends on ALTER_ADD_INDEX flag. Creating a column of
SERIAL data type missed that flag. Though equivalent operation

  alter table t1 add x bigint unsigned not null auto_increment unique;

has ALTER_ADD_INDEX flag.

MDEV-23182: Server crashes in Item::fix_fields_if_needed / table_value_constr::prepare upon 2nd execution of PS

Repeating execution of a query containing the clause IN with string literals
in environment where the server variable in_predicate_conversion_threshold
is set results in server abnormal termination in case the query is run
as a Prepared Statement and conversion of charsets for string values in the
query are required.

The reason for server abnormal termination is that instances of the class
Item_string created on transforming the IN clause into subquery were created
on runtime memory root that is deallocated on finishing execution of Prepared
statement. On the other hand, references to Items placed on deallocated memory
root still exist in objects of the class table_value_constr. Subsequent running
of the same prepared statement leads to dereferencing of pointers to already
deallocated memory that could lead to undefined behaviour.

To fix the issue the values being pushed into a values list for TVC are created
by cloning their original items. This way the cloned items are allocate on
the PS memroot and as consequences no dangling pointer does more exist.

Consider the following use case:
MariaDB [test]> CREATE TABLE t1 (field1 BIGINT DEFAULT -1);
MariaDB [test]> CREATE VIEW v1 AS SELECT DISTINCT field1 FROM t1;

Repeated execution of the following query as a Prepared Statement

MariaDB [test]> PREPARE stmt FROM 'SELECT * FROM v1 WHERE field1 <=> NULL';
MariaDB [test]> EXECUTE stmt;

results in a crash for a server built with DEBUG.

MariaDB [test]> EXECUTE stmt;
ERROR 2013 (HY000): Lost connection to MySQL server during query

Assertion failed: (!result), function convert_const_to_int, file item_cmpfunc.cc, line 476.
Abort trap: 6 (core dumped)

The crash inside the function convert_const_to_int() happens by the reason
that the value -1 is stored in an instance of the class Field_longlong
on restoring its original value in the statement
  result= field->store(orig_field_val, TRUE);
that leads to assigning the value 1 to the variable 'result' with subsequent
crash in the DBUG_ASSERT statement following it
  DBUG_ASSERT(!result);

The main matter here is why this assertion failure happens on the second
execution of the prepared statement and doens't on the first one.
On first handling of the statement
  'EXECUTE stmt;'
a temporary table is created for serving the query involving the view 'v1'.
The table is created by the function create_tmp_table() in the following
calls trace: (trace #1)
  JOIN::prepare (at sql_select.cc:725)
    st_select_lex::handle_derived
      LEX::handle_list_of_derived
        TABLE_LIST::handle_derived
          mysql_handle_single_derived
            mysql_derived_prepare
              select_union::create_result_table
                create_tmp_table

Note, that the data member TABLE::status of a TABLE instance returned by the
function create_tmp_table() has the value 0.

Later the function setup_table_map() is called on the TABLE instance just
created for the sake of the temporary table (calls trace #2 is below):
  JOIN::prepare (at sql_select.cc:737)
    setup_tables_and_check_access
      setup_tables
        setup_table_map
where the data member TABLE::status is set to the value STATUS_NO_RECORD.

After that when execution of the method JOIN::prepare reaches calling of
the function setup_without_group() the following calls trace is invoked
  JOIN::prepare
    setup_without_group
      setup_conds
        Item_func::fix_fields
          Item_func_equal::fix_length_and_dec
            Item_bool_rowready_func2::fix_length_and_dec
              Item_func::setup_args_and_comparator
                Item_func::convert_const_compared_to_int_field
                  convert_const_to_int

There is the following code snippet in the function convert_const_to_int()
at the line item_cmpfunc.cc:448
    bool save_field_value= (field_item->const_item() ||
                            !(field->table->status & STATUS_NO_RECORD));
Since field->table->status has bits STATUS_NO_RECORD set the variable
save_field_value is false and therefore neither the method
Field_longlong::val_int() nor the method Field_longlong::store is called
on the Field instance that has the numeric value -1.
That is the reason why first execution of the Prepared Statement for the query
  'SELECT * FROM v1 WHERE field1 <=> NULL'
is successful.

On second running of the statement 'EXECUTE stmt' a new temporary tables
is also created by running the calls trace #1 but the trace #2 is not executed
by the reason that data member SELECT_LEX::first_cond_optimization has been set
to false on first execution of the prepared statemet (in the method
JOIN::optimize_inner()). As a consequence, the data member TABLE::status for
a temporary table just created doesn't have the flags STATUS_NO_RECORD set and
therefore on re-execution of the prepared statement the methods
Field_longlong::val_int() and Field_longlong::store() are called for the field
having the value -1 and the DBUG_ASSERT(!result) is fired.

To fix the issue the data member TABLE::status has to be assigned the value
STATUS_NO_RECORD in every place where the macros empty_record() is called
to emptify a record for just instantiated TABLE object created on behalf
the new temporary table.

Followup to fix for MDEV-25858: When test_if_skip_sort_order() decides
to use an index to satisfy ORDER BY ... LIMIT clause, it should
disable "Range Checked for Each Record" optimization.

Do this in all cases.

* galera_pc_bootstrap
* galera_ipv6_mariabackup
* galera_ipv6_mariabackup_section
* galera_ipv6_rsync
* galera_ipv6_rsync_section
* galera_ssl_reload
* galera_toi_vote
* galera_wsrep_schema_init

because MTR sporadaically fails: Failed to start mysqld or mysql_shutdown failed

create_log_files(): Check log_set_capacity() before modifying
or creating any log files.

innobase_start_or_create_for_mysql(): If create_log_files()
fails and we were initializing a new database, delete the
system tablespace files before exiting.

1. Galera SST scripts should use ssl_capath (not ssl_ca) for CA
   directory. The current implementation tries to automatically
   detect the path using the trailing slash in the ssl_ca variable
   value, but this approach is not compatible with the server
   configuration. Now, by analogy with the server, SST scripts
   also use a separate ssl_capath variable. In addition, a similar
   tcapath variable has been added for the old-style configuration
   (in the "sst" section).
2. Openssl utility detection made more reliable.
3. Removed extra spaces in automatically generated command lines -
   to simplify debugging of the SST scripts.
4. In general, the code for detecting the presence or absence of
   auxiliary utilities has been improved - it is made more reliable
   in some configurations (and for shells other than bash).

1. Galera SST scripts should use ssl_capath (not ssl_ca) for CA
   directory. The current implementation tries to automatically
   detect the path using the trailing slash in the ssl_ca variable
   value, but this approach is not compatible with the server
   configuration. Now, by analogy with the server, SST scripts
   also use a separate ssl_capath variable. In addition, a similar
   tcapath variable has been added for the old-style configuration
   (in the "sst" section).
2. Openssl utility detection made more reliable.
3. Removed extra spaces in automatically generated command lines -
   to simplify debugging of the SST scripts.
4. In general, the code for detecting the presence or absence of
   auxiliary utilities has been improved - it is made more reliable
   in some configurations (and for shells other than bash).

fil_crypt_set_encrypt_tables(): If no encryption threads have been
initialized, do nothing.

it's not printed, not cleaned up without perfschema,
so isn't supposed to be written into either

this fixes "Memory not freed" warnings when early command line
options produce warnings in non-perfschema builds