This is a partial revert of
commit 8b6a308e (MDEV-29883)
and a follow-up to the
merge commit 394fc71f (MDEV-24569).

The latching order related to any operation that accesses the allocation
metadata of an InnoDB index tree is as follows:

1. Acquire dict_index_t::lock in non-shared mode.
2. Acquire the index root page latch in non-shared mode.
3. Possibly acquire further index page latches. Unless an exclusive
dict_index_t::lock is held, this must follow the root-to-leaf,
left-to-right order.
4. Acquire a *non-shared* fil_space_t::latch.
5. Acquire latches on the allocation metadata pages.
6. Possibly allocate and write some pages, or free some pages.

btr_get_size_and_reserved(), dict_stats_update_transient_for_index(),
dict_stats_analyze_index(): Acquire an exclusive fil_space_t::latch
in order to avoid a deadlock in fseg_n_reserved_pages() in case of
concurrent access to multiple indexes sharing the same "inode page".

fseg_page_is_allocated(): Acquire an exclusive fil_space_t::latch
in order to avoid deadlocks. All callers are holding latches
on a buffer pool page, or an index, or both.
Before commit edbde4a1 (MDEV-24167)
a third mode was available that would not conflict with the shared
fil_space_t::latch acquired by ha_innobase::info_low(),
i_s_sys_tablespaces_fill_table(),
or i_s_tablespaces_encryption_fill_table().
Because those calls should be rather rare, it makes sense to use
the simple rw_lock with only shared and exclusive modes.

fil_crypt_get_page_throttle(): Avoid invoking fseg_page_is_allocated()
on an allocation bitmap page (which can never be freed), to avoid
acquiring a shared latch on top of an exclusive one.

mtr_t::s_lock_space(), MTR_MEMO_SPACE_S_LOCK: Remove.

buf_pool_t::watch_set(): Always buffer-fix a block if one was found,
no matter if it is a watch sentinel or a buffer page. The type of
the block descriptor will be rechecked in buf_page_t::watch_unset().
Do not expect the caller to acquire the page hash latch. Starting with
commit bd5a6403 it is safe to release
buf_pool.mutex before acquiring a buf_pool.page_hash latch.

buf_page_get_low(): Adjust to the changed buf_pool_t::watch_set().

This simplifies the logic and fixes a bug that was reproduced when
using debug builds and the setting innodb_change_buffering_debug=1.

buf_read_page_low(): Map the buf_page_t::read_complete() return
value DB_FAIL to DB_PAGE_CORRUPTED. The purpose of the DB_FAIL
return value is to avoid error log noise when read-ahead brings
in an unused page that is typically filled with NUL bytes.

If a synchronous read is bringing in a corrupted page where the
page frame does not contain the expected tablespace identifier and
page number, that must be treated as an attempt to read a corrupted
page. The correct error code for this is DB_PAGE_CORRUPTED.
The error code DB_FAIL is not handled by row_mysql_handle_errors().

This was missed in commit 0b47c126
(MDEV-13542).

This almost completely reverts
commit acd23da4 and
retains a safe optimization:

recv_sys_t::parse(): Remove any old redo log records for the
truncated tablespace, to free up memory earlier.
If recovery consists of multiple batches, then recv_sys_t::apply()
will must invoke recv_sys_t::trim() again to avoid wrongly
applying old log records to an already truncated undo tablespace.

WITH TIES would not take effect if SELECT DISTINCT was used in a
context where an INDEX is used to resolve the ORDER BY clause.

WITH TIES relies on the `JOIN::order` to contain the non-constant
fields to test the equality of ORDER BY fiels required for WITH TIES.

The cause of the problem was a premature removal of the `JOIN::order`
member during a DISTINCT optimization. This lead to WITH TIES code assuming
ORDER BY only contained "constant" elements.

Disable this optimization when WITH TIES is in effect.

(side-note: the order by removal does not impact any current tests, thus
it will be removed in a future version)

Reviewed by: monty@mariadb.org

There was a bug in JOIN::make_notnull_conds_for_range_scans() when
clearing TABLE->tmp_set, which was used to mark fields that could not be
null.

This function was only used if 'not_null_range_scan=on' is set.

The effect was that tmp_set contained a 'random value' and this caused
the optimizer to think that some fields could not be null.
FLUSH TABLES clears tmp_set and because of this things worked temporarily.

Fixed by clearing tmp_set properly.

Very minor hits found by Coverity for the S3 engine.

- cmp_rec_rec_simple() fails to detect duplicate key error for
bulk insert operation

- InnoDB fails to reset the after_apply variable before applying
the redo log in last batch during multi-batch recovery.

- During non-last batch of multi-batch recovery, InnoDB holds
log_sys.mutex and preallocates the block which may intiate
page flush, which may initiate log flush, which requires
log_sys.mutex to acquire again. This leads to assert failure.
So InnoDB recovery should release log_sys.mutex before
preallocating the block.

Task:
=====
Update tests to reflect MDEV-20122, deprecation of master_use_gtid=current_pos.
Change Master (CM) statements were either removed or modified with
current_pos --> slave_pos based on original intention of the test.
Reviewed by:
============
Brandon Nesterenko <brandon.nesterenko@mariadb.com>

The tests expect the SIGNAL to not be cleared. Thus set NO_CLEAR_EVENT
within DBUG_EXECUTE_IF

As requested to the UN the country formerly known as Turkey is
to be refered to as Türkiye.

Reviewer: Alexander Barkov

MDEV-30608: rpl.rpl_delayed_parallel_slave_sbm sometimes fails with Seconds_Behind_Master should not have used second transaction timestamp

One of the constraints added in the MDEV-29639 patch, is that only
the first event after idling should update last_master_timestamp;
and as long as the replica has more events to execute, the variable
should not be updated. The corresponding test,
rpl_delayed_parallel_slave_sbm.test, aims to verify this; however,
if the IO thread takes too long to queue events, the SQL thread can
appear to catch up too fast.

This fix ensures that the relay log has been fully written before
executing the events.

Note that the underlying cause of this test failure needs to be
addressed as a bug-fix, this is a temporary fix to stop test
failures. To track work on the bug-fix for the underlying issue,
please see MDEV-30619.

The parser code for single-table DELETE missed the call of the function
LEX::check_main_unit_semantics(). As a result the the field nested level
of SELECT_LEX structures remained set 0 for all non-top level selects.
This could lead to different kind of problems. In particular this did not
allow to determine properly the selects where set functions had to be
aggregated when they were used in inner subqueries.

Approved by Oleksandr Byelkin <sanja@mariadb.com>

This patch is the result of running
run-clang-tidy -fix -header-filter=.* -checks='-*,modernize-use-equals-default' .

Code style changes have been done on top. The result of this change
leads to the following improvements:

1. Binary size reduction.
* For a -DBUILD_CONFIG=mysql_release build, the binary size is reduced by
  ~400kb.
* A raw -DCMAKE_BUILD_TYPE=Release reduces the binary size by ~1.4kb.

2. Compiler can better understand the intent of the code, thus it leads
   to more optimization possibilities. Additionally it enabled detecting
   unused variables that had an empty default constructor but not marked
   so explicitly.

   Particular change required following this patch in sql/opt_range.cc

   result_keys, an unused template class Bitmap now correctly issues
   unused variable warnings.

   Setting Bitmap template class constructor to default allows the compiler
   to identify that there are no side-effects when instantiating the class.
   Previously the compiler could not issue the warning as it assumed Bitmap
   class (being a template) would not be performing a NO-OP for its default
   constructor. This prevented the "unused variable warning".

The -D flag was not passed to asm compiler, despite SET_PROPERTY(COMPILE_OPTIONS)
The exact reason for that remains unknown.  It was not seen with gcc, as
nor was be reproduced on newer CMake.

Debian 9 has EOL July 6th, 2020. This commit cleans it up
from debian/autobake-deb.sh which is used to build official
versions of MariaDB

Correct error in to only say "continuing to smaller size" if it really
is.

The existing storage/rocksdb/CMakeCache.txt defined
ATOMIC_EXTRA_LIBS when atomics where required. This was
determined by the toplevel configure.cmake test
(HAVE_GCC_C11_ATOMICS_WITH_LIBATOMIC).

As build_rocksdb.cmake is included after ATOMIC_EXTRA_LIBS
was set, we just need to use it. As such no riscv64
specific macro is needed in build_rocksdb.cmake.

As highlighted by Gianfranco Costamagna (@LocutusOfBorg)
in #2472 overwriting SYSTEM_LIBS was problematic.
This is corrected in case in future SYSTEM_LIBS is changed
elsewhere.

Closes #2472.

Normalize innodb_flush_method, the same as the service, before
attempting to print it.