btr_search_hash_table_validate(), btr_search_validate(): Add the
parameter THD for checking if the statement has been killed.
Any non-QUICK CHECK TABLE will validate the entire adaptive hash index
for all InnoDB tables, which may be extremely slow when running
multiple concurrent CHECK TABLE.

During the upgrade procedure on Windows mysqld.exe is started with
the named pipe connection protocol. mysqladmin.exe then pings the
server to check if is up and running. Command line looks like:
   mysqladmin.exe --protocol=pipe --socket=mysql_upgrade_service_xxx ping
But the "socket" parameter resets the "protocol" which was previously
initialized with the "pipe" value, setting it to "socket".
As a result, connection cannot be established and the upgrade
procedure fails.
"socket" in Windows is used to pass the name of the pipe so resetting
the protocol is not valid in this case.

This commit fixes resetting of the "protocol" parameter with "socket"
parameter in the case when protocol has been previously initialized
to "pipe" value

The fix is in replacing the waiting for the whole purge finishing
with the the waiting for only delete-marked records purging finishing.

Reviewed by: Marko Mäkelä

The issue is caused by MDEV-30400 fix.

There are two cursors in btr_estimate_n_rows_in_range() - p1 and p2, but
both share the same mtr. Each cursor contains mtr savepoint for the
previously fetched block to release it then the current block is
fetched.

Before MDEV-30400 the block was released with
mtr_t::release_block_at_savepoint(), it just unfixed a block and
released its page patch. In MDEV-30400 it was replaced with
mtr_t::rollback_to_savepoint(), which does the same as the former
mtr_t::release_block_at_savepoint(ulint begin, ulint end) but also
erases the corresponding slots from mtr memo, what invalidates any
stored mtr's memo savepoints, greater or equal to "begin".

The idea of the fix is to get rid of savepoints at all in
btr_estimate_n_rows_in_range() and
btr_estimate_n_rows_in_range_on_level(). As
mtr_t::rollback_to_savepoint() erases elements from mtr_t::m_memo, we
know what element of mtr_t::m_memo can be deleted on the certain case,
so there is no need to store savepoints.

See also the following slides for details:
https://docs.google.com/presentation/d/1RFYBo7EUhM22ab3GOYctv3j_3yC0vHtBY9auObZec8U

Reviewed by: Marko Mäkelä

recv_sys_t::parse(): For undo tablespace truncation mini-transactions,
remember the start_lsn instead of the end LSN. This is what we expect
after commit 461402a5 (MDEV-30479).

mysql.proc. The table is probably corrupted"

Analysis: When mysql_upgrade runs statements for upgrade, characterset is
converted to utf8mb4 because server starts with old_mode that interprets
utf8 to utf8mb4, but mysql.proc table has "utf8mb3" as hardcoded, so
it crashes with corrupted table.

Fix: Changed Table_check_intact::check() definition to allow both
utf8mb3 and utf8mb4 by checking prefix and changing the upgrade scripts
to explicitly use utf8mb3

MDEV-29253 Detect incompatible MySQL partition scheme and either convert
them or report to user and in error log.

This task is about converting in place MySQL 5.6 and 5.7 partition tables
to MariaDB as part of mariadb-upgrade.

- Update TABLE_SHARE::init_from_binary_frm_image() to be able to read
  MySQL frm files with partitions.
- Create .par file, if it do not exists, on open of partitioned table.

Executing mariadb-upgrade will create all the missing .par files.
The MySQL .frm file will be changed to MariaDB format after next
ALTER TABLE.

Other changes:
- If we are using stored mysql_version to distingush between MySQL and
  MariaDB  .frm file information, do not upgrade mysql_version in the
  .frm file as part of CHECK TABLE .. FOR UPGRADE as this would cause
  problems next time we parse the .frm file.

- Moved view checks after privilege tables are fixed. This is to avoid
  warnings about wrongly defined mysql.proc when checking views.
- Don't use stat tables before they have been fixed.
- Don't run mysql_fix_view() if 'FOR MYSQL' is used if the view is
  already a MariaDB view.
- Added 'FOR UPGRADE' as an option for 'REPAIR VIEW' to be able to
  detect if the REPAIR command comes from mariadb_upgrade. In this
  case we get a warning, instead of an error, if a definer of a view
  does not exists.

In this case, one would end up calling my_error(ER_BAD_DB_ERROR, ...)
with a null ptr for DB, which caused a NULL ptr dereference.

The original code generated a warning in gcc 13.1

When opening and locking tables, if triggers will be invoked in a
separate database, thd->set_db() is invoked, thus freeeing the memory
and headers which thd->db had previously pointed to. In row based
replication, the event execution logic initializes thd->db to point
to the database which the event targets, which is owned by the
corresponding table share (introduced in d9898c9a for MDEV-7409).
The problem then, is that during the table opening and locking
process for a row event, memory which belongs to the table share
would be freed, which is not valid.

This patch replaces the thd->reset_db() calls to thd->set_db(),
which copies-by-value, rather than by reference. Then when the
memory is freed, our copy of memory is freed, rather than memory
which belongs to a table share.

Notes:
  1. The call to change thd->db now happens on a higher-level, in
Rows_log_event::do_apply_event() rather than ::do_exec_row(), in the
call stack. This is because do_exec_row() is called within a loop,
and each invocation would redundantly set and unset the db to the
same value.
  2. thd->set_db() is only used if triggers are to be invoked, as
there is no vulnerability in the non-trigger case, and copying
memory would be an unnecessary inefficiency.

Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>

- InnoDB shouldn't acquire the tablespace when it is being stopped
or closed

Fix a typo in make_join_statistics(): when updating statistics for
derived table, set s->table->... not "table->..."

(Same as
TODO-3938: best_access_path shows negative costs for mrr=on)

best_access_path() assumes that quick select cost includes
(quick->rows/TIME_FOR_COMPARE) as a cost of checking the attached
part of the WHERE condition.

It calls adjust_quick_cost() to subtract addition from quick's cost.

The problem was that DS-MRR cost formula didn't include this cost.
For very large tables, adjust_quick_cost() would produce a negative
cost which would cause assert in debug build or bad query plan choice
in release builds.
Approved-by: Monty <monty@mariadb.org>

After further I/O on a tablespace has been stopped
(for example due to DROP TABLE or an operation that
rebuilds a table), page cleaner thread tries to
flush the pending writes for the tablespace and
releases the tablespace reference even though it was not
acquired.

fil_space_t::flush(): Don't release the tablespace when it is
being stopped and closed

Thanks to Marko Mäkelä for suggesting this patch.

Commit fixes Debian SySV-init script fail:
  /etc/init.d/mariadb: line 90: [: : integer expression expected
which happens if datadir is not changed in configuration which
makes it invisible when printing MariaDB config defaults.

Commit makes sure that there is some value if nothing else if in hand
use default /usr/lib/mysql or fail with correct error message if
directory is not present

- InnoDB throws ASAN error while adding the index on virtual column
of system versioned table. InnoDB wrongly assumes that virtual
column collation type changes, creates new column with different
character set. This leads to failure while detaching the column
from indexes.

embedded doesn't have optimizer trace,
view-protocol doesn't work with long column names.

The test gcol.gcol_purge would reliably hang on 10.6 on a
Microsoft Windows builder without this adjustment.
A similar adjustment was applied in
commit 3e40f9a7
to the tests innodb.dml_purge and innodb.instant_alter_purge.

innodb_undo_log_truncate_update(): A callback function. If
SET GLOBAL innodb_undo_log_truncate=ON, invoke
srv_wake_purge_thread_if_not_active().

srv_wake_purge_thread_if_not_active(): If innodb_undo_log_truncate=ON,
always wake up the purge subsystem.

srv_do_purge(): If the history is empty, invoke
trx_purge_truncate_history() in order to free undo log pages.

trx_purge_truncate_history(): If head.trx_no==0, consider the
cached undo logs to be free.

trx_purge(): Remove the parameter "bool truncate" and let the
caller invoke trx_purge_truncate_history() directly.

Reviewed by: Vladislav Lesin

purge_sys_t::sees(): Wrapper for view.sees().

trx_purge_truncate_history(): Invoke purge_sys.sees() instead of
comparing to head.trx_no, to determine if undo pages can be safely freed.

The test innodb.cursor-restore-locking was adjusted by Vladislav Lesin,
as was the the debug instrumentation in row_purge_del_mark().

Reviewed by: Vladislav Lesin

LooseScan code set opt_range_condition_rows to be the

  MIN(loose_scan_plan->records, table->records)

totally ignoring possible quick range selects.  If there was a quick
select $QUICK on another index with

  $QUICK->records < loose_scan_plan->records

this would create a situation where

   opt_range_condition_rows > $QUICK->records

which causes an assert in 10.6+ and potentially wrong query plan
choice in 10.5.

Fixed by making opt_range_condition_rows to be the minimum #rows
of any quick select.
Approved-by: Monty <monty@mariadb.org>

trx_purge_free_segment(), trx_purge_truncate_rseg_history():
Replace some unreachable code with debug assertions.
A buffer-fix does prevent pages from being evicted
from the buffer pool; see buf_page_t::can_relocate().

Tested by: Matthias Leich

The code in choose_best_splitting() assumed that the join prefix is
in join->positions[].

This is not necessarily the case. This function might be called when
the join prefix is in join->best_positions[], too.
Follow the approach from best_access_path(), which calls this function:
pass the current join prefix as an argument,
"const POSITION *join_positions" and use that.

In commit f99a8918 this line was changed to not use awk, and new version
copied both to init file and preinst file but overlooking that they use
different variable names.

Also fix minor syntax issues to make Shellcheck happy.

All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer
Amazon Web Services, Inc.