- service not using "--defaults-file" can have any name not just "MySQL"
- service with "--defaults-file", without datadir in them
use default datadir (install_root\data)

and remove it on error

Disable existing non-empty datadir for mysql_install_db.exe

MDEV-23003 INFORMATION_SCHEMA.INNODB_TABLESPACES_ENCRYPTION requires SUPER instead PROCESS privilege

Fix a typo in a source code. Now real required privileges corresponds
to a ones mentions in documentation.

Documentation states that this table requires PROCESS privilege:
https://mariadb.com/kb/en/information-schema-innodb_tablespaces_encryption-table/

The issue here was that the left expr and right expr of the ANY subquery
had different character sets, so we were converting the left expr to utf8 character set.
So when this conversion was happening we were actually converting the item inside the cache,
it looked like <cache>(convert(t1.l1 using utf8)), which is incorrect.
To fix this problem we are going to store the reference of the left expr and convert that
to utf8 character set, it would look like convert(<cache>(`test`.`t1`.`l1`) using utf8)

Problem:
========
Relay_log_info::flush reports following MSAN issue.
==17820==WARNING: MemorySanitizer: use-of-uninitialized-value is reported
#5  0x00005584f0981441 in my_write (Filedes=22,
Buffer=0x72500003e818 "5\n./slave-relay-bin.000003\n21385\n
master-bin.000001\n21643\n0\n", '\245' <repeats 141 times>..., Count=118,
MyFlags=532) at /home/sujatha/bug_repo/test-10.5-msan/mysys/my_write.c:49

Analysis:
=========
In parallel replication at the end of each statement execution the worker execution
status is updated in 'relay-log.info' file. When two workers try to flush
the status at the same time, since the write to cache is not serialized both
workers write to the same address simultaneously and increment the
length twice. Because of this the length of buffer is more than actual data.
When flush code tries to read the buffer beyond valid data length MSAN
reports uninitialized values error.

Fix:
===
Serialize the relay log flush operation using "rli->data_lock".

Deadlock in DbugParse, on Linux.

In 10.1, DBUG recursive mutex was improperly implemented.
CODE_STATE::locked counter was never updated.

Copy the code around LockMutex/UnlockMutex from 10.2

Analysis:
========
When "Profiling" is enabled, server collects the resource usage of each
statement that gets executed in current session. Profiling doesn't support
nested statements. In order to ensure this behavior when profiling is enabled
for a statement, there should not be any other active query which is being
profiled. This active query information is stored in 'current' variable. When
a nested query arrives it finds 'current' being not NULL and server aborts.

When 'init_connect' and 'init_slave' system variables are set they contain a
set of statements to be executed. "execute_init_command" is the function call
which invokes "dispatch_command" for each statement provided in
'init_connect', 'init_slave' system variables. "execute_init_command" invokes
"start_new_query" and it passes the statement list to "dispatch_command". This
"dispatch_command" intern invokes "start_new_query" which leads to nesting of
queries. Hence '!current' assert is triggered.

Fix:
===
Remove profiling from "execute_init_command" as it will be done within
"dispatch_command" execution.

changes.

This requires Galera commit 065e484144c5999709ae8fd19844da72bb785073

On FreeBSD, perl isn't in /usr/bin, its in /usr/local/bin or
elsewhere in the path.

Like storage/{maria/unittest/,}ma_test_* , we use /usr/bin/env to
find perl and run it.

Apparently, in Win10, dtrace is avaialable, but it does not work with
MariaDB user probes

FreeState() zeros init_settings.out_file, which another thread can be using

The code in fill_schema_schemata() did not take into account that
make_db_list() can leave empty db_names if the requested database
name was too long, so the call for db_names.at(0) crashed on assert.

- Moving the code testing if the database directory exists
  into a separate function verify_database_directory_exists()
- Modifying the test to check if db_names is not empty

Problem:
=======
The "Start binlog_dump" message hasn't been updated to include the slave's
requested GTID position:

20:05:05 139836760311552 [Note] Start binlog_dump to slave_server(2), pos(, 4)

For diagnostic purposes, it would be helpful if the GTID position were
included.

Fix:
===
Imporve "Start binlog_dump" print message to include "using_gtid" and
"GTID position" requested by slave.

Ex:
[Note] Start binlog_dump to slave_server(2), pos(, 4), using_gtid(1),
  gtid('1-1-201,2-2-100')

[Note] Start binlog_dump to slave_server(3), pos('mariadb-bin.004142',
  507988273), using_gtid(0), gtid('')

Use krb5_xfree if available, otherwise default to
krb5_free_unparsed_name.

MDEV-22755 CREATE USER leads to indirect SIGABRT in __stack_chk_fail () from fill_schema_user_privileges + *** stack smashing detected *** (on optimized builds)

The code erroneously used buff[100] in a fiew places to make
a GRANTEE value in the form:
  'user'@'host'

Fix:
- Fixing the code to use (USER_HOST_BUFF_SIZE + 6) instead of 100.
- Adding a DBUG_ASSERT to make sure the buffer is enough
- Wrapping the code into a class Grantee_str, to reuse it easier in 4 places.

On large hard disks (> 2TB), the plugin won't function correctly, always
showing 2 TB of available space due to integer overflow. Upgrade table
fields to bigint to resolve this problem.

The real problem was that attempt to roll back cahnes after end of memory in QC was made incorrectly and lead to using uninitialized memory.
(bug has nothing to do with resize operation, it is just lack of resources erro processed incorrectly)

This reverts commit 44339123.

In case of SELECT without tables which returns either 0 or 1 rows,
JOIN::exec_inner() did not check if the flag representing SQL_CALC_FOUND_ROWS
is set or not and send_records was direclty assigned 0. So SELECT FOUND_ROWS()
was giving 0 in the output. Now it checks if the flag is set, if it is set
send_record=1 else 0. 1 is the number of rows that could have been sent
to the client if the SELECT query had SQL_CALC_FOUND_ROWS.
It is 0 when no rows were sent because the SELECT query did not have
SQL_CALC_FOUND_ROWS.

MDEV-22717: Conditional jump or move depends on uninitialised value(s) in find_uniq_filename(char*, unsigned long)

Fix:
===
Initialize 'number' variable to '0'.

MDEV-22728: SIGFPE in Unique::get_cost_calc_buff_size from prepare_search_best_index_intersect on optimized builds

For low sort_buffer_size, in the cost calculation of using the Unique object the elements in the tree were evaluated to 0, make sure to have atleast 1 element in the Unique tree.

Also for the function Unique::get allocate memory for atleast MERGEBUFF2+1 keys.

For DECIMAL[(M[,D])] datatype max_sort_length was not being honoured which was leading to buffer
overflow while making the sort key. The fix to this problem would be to create sort keys for decimals
with atmost max_sort_key bytes

Important:
The minimum value of max_sort_length has been raised to 8 (previously was 4),
so fixed size datatypes like DOUBLE and BIGINIT are not truncated for
lower values of max_sort_length.

Backported the support for aborting and replaying stored procedure and fix for trigger
key assigments from 10.4 version.
Backported also two mtr tests: wsrep_sp_bf_abort and MDEV-20225

Backported the support for aborting and replaying stored procedure and fix for trigger
key assigments from 10.4 version.
Backported also two mtr tests: wsrep_sp_bf_abort and MDEV-20225

both both -> both
Closes #1560

Part of MDEV-19061 - table_share used for reading statistical tables is
                     not protected

Previously multiple threads were allowed to load histograms concurrently.
There were no known problems caused by this. But given amount of data
races in this code, it'd happen sooner or later.

To avoid scalability bottleneck, histograms loading is protected by
per-TABLE_SHARE atomic variable.

Whenever histograms were loaded by preceding statement (hot-path), a
scalable load-acquire check is performed.

Whenever histograms have to be loaded anew, mutual exclusion for loaders
is established by atomic variable. If histograms are being loaded
concurrently, statement waits until load is completed.

- Table_statistics::total_hist_size moved to TABLE_STATISTICS_CB: only
  meaningful within TABLE_SHARE (not used for collected stats).
- TABLE_STATISTICS_CB::histograms_can_be_read and
  TABLE_STATISTICS_CB::histograms_are_read are replaced with a tri state
  atomic variable.
- Simplified away alloc_histograms_for_table_share().

Note: there's still likely a data race if a thread attempts accessing
histograms data after it failed to load it (because of concurrent load).
It was there previously and goes out of the scope of this effort. One way
of fixing it could be reviving TABLE::histograms_are_read and adding
appropriate checks whenever it is needed.

Part of MDEV-19061 - table_share used for reading statistical tables is
                     not protected

Previously multiple threads were allowed to load statistics concurrently.
There were no known problems caused by this. But given amount of data
races in this code, it'd happen sooner or later.

To avoid scalability bottleneck, statistics loading is protected by
per-TABLE_SHARE atomic variable.

Whenever statistics were loaded by preceding statement (hot-path), a
scalable load-acquire check is performed.

Whenever statistics have to be loaded anew, mutual exclusion for loaders
is established by atomic variable. If statistics are being loaded
concurrently, statement waits until load is completed.

TABLE_STATISTICS_CB::stats_can_be_read and
TABLE_STATISTICS_CB::stats_is_read are replaced with a tri state atomic
variable.

Part of MDEV-19061 - table_share used for reading statistical tables is
                     not protected

Removed redundant loops, integrated logics into the caller instead.
Unified condition in read_statistics_for_tables(), less
"table_share != NULL" checks, no more potential "table_share == NULL"
dereferencing.

Part of MDEV-19061 - table_share used for reading statistical tables is
                     not protected

MDEV-22744 *SAN: sql/item_xmlfunc.cc:791:43: runtime error: downcast of address ... which does not point to an object of type 'Item_func' note: object is of type 'Item_bool' (on optimized builds)

In Item_nodeset_func_predicate::val_nodeset, args[1] is not necessarily
an Item_func descendant. It can be Item_bool.

Removing a wrong cast. It was not really needed anyway.

Pre-definitions are allowed for non-embedded.
Failur catched with:
```
cmake ../../10.1 -DCMAKE_BUILD_TYPE=Debug -DCMAKE_CXX_COMPILER=g++-9
-DCMAKE_C_COMPILER=gcc-9 -DWITH_EMBEDDED_SERVER=ON -DCMAKE_BUILD_TYPE=Debug
-DPLUGIN_{ARCHIVE,TOKUDB,MROONGA,OQGRAPH,ROCKSDB,PERFSCHEMA,SPIDER,SPHINX}=N
-DMYSQL_MAINTAINER_MODE=ON -DNOT_FOR_DISTRIBUTION=ON
```
Alternative fix would be
```
--- a/sql/sql_acl.cc
+++ b/sql/sql_acl.cc
@@ -201,8 +201,10 @@ LEX_STRING current_user= { C_STRING_WITH_LEN("*current_user") };
 LEX_STRING current_role= { C_STRING_WITH_LEN("*current_role") };
 LEX_STRING current_user_and_current_role= { C_STRING_WITH_LEN("*current_user_and_current_role") };

+#ifndef EMBEDDED_LIBRARY
 class ACL_USER;
 static ACL_USER *find_user_or_anon(const char *host, const char *user, const char *ip);
+#endif
```

- `SET DEFAULT ROLE xxx [FOR yyy]` should say:
  "User yyy has not been granted a role xxx" if:
    - The current user (not the user `yyy` in the FOR clause) can see the
    role xxx. It can see the role if:
      * role exists in `mysql.roles_mappings` (traverse the graph),
      * If the current user has read access on `mysql.user` table - in
    that case, it can see all roles, granted or not.
    - Otherwise it should be "Invalid role specification".

In other words, it should not be possible to use `SET DEFAULT ROLE` to discover whether a specific role exist or not.

The immediate bug was caused by a failure to recognize a correct
position to stop the slave applier run in optimistic parallel mode.
There were the following set of issues that the analysis unveil.
1 incorrect estimate for the event binlog position passed to
  is_until_satisfied
2 wait for workers to complete by the driver thread did not account non-group events
  that could be left unprocessed and thus to mix up the last executed
  binlog group's file and position:
  the file remained old and the position related to the new rotated file
3 incorrect 'slave reached file:pos' by the parallel slave report in the error log
4 relay log UNTIL missed out the parallel slave branch in
  is_until_satisfied.

The patch addresses all of them to simplify logics of log change
notification in either the master and relay-log until case.
P.1 is addressed with passing the event into is_until_satisfied()
for proper analisis by the function.
P.2 is fixed by changes in handle_queued_pos_update().
P.4 required removing relay-log change notification by workers.
Instead the driver thread updates the notion of the current relay-log
fully itself with aid of introduced
bool Relay_log_info::until_relay_log_names_defer.

An extra print out of the requested until file:pos is arranged
with --log-warning=3.