improving a test that shows a failure.

the wait condition was for data in tables but the 
log positions are updates after the data are unlocked.
So there was a time window
[after_table_unlock_for_select, log_pos_updated] where the
orig cond was true but log position might be changed.
the correct one is to expect the last pos of the
slave's insert in the output of show_slave_status on the
master.

refining a test for embedded env.

into  mail.hezx.com:/media/sda3/work/mysql/bkwork/b33029_5.0_to_5.1_fails_on_dup_key/5.1

into  pilot.mysql.com:/data/msvensson/mysql/mysql-5.1-rpl

into  pilot.mysql.com:/data/msvensson/mysql/mysql-5.1-rpl

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.1-rpl

using a trig in SP

For all 5.0 and up to 5.1.12 exclusive, when a stored routine or
trigger caused an INSERT into an AUTO_INCREMENT column, the
generated AUTO_INCREMENT value should not be written into the
binary log, which means if a statement does not generate
AUTO_INCREMENT value itself, there will be no Intvar event (SET
INSERT_ID) associated with it even if one of the stored routine
or trigger caused generation of such a value. And meanwhile, when
executing a stored routine or trigger, it would ignore the
INSERT_ID value even if there is a INSERT_ID value available set
by a SET INSERT_ID statement.

Starting from MySQL 5.1.12, the generated AUTO_INCREMENT value is
written into the binary log, and the value will be used if
available when executing the stored routine or trigger.

Prior fix of this bug in MySQL 5.0 and prior MySQL 5.1.12
(referenced as the buggy versions in the text below), when a
statement that generates AUTO_INCREMENT value by the top
statement was executed in the body of a SP, all statements in the
SP after this statement would be treated as if they had generated
AUTO_INCREMENT by the top statement.  When a statement that did
not generate AUTO_INCREMENT value by the top statement but by a
function/trigger called by it, an erroneous Intvar event would be
associated with the statement, this erroneous INSERT_ID value
wouldn't cause problem when replicating between masters and
slaves of 5.0.x or prior 5.1.12, because the erroneous INSERT_ID
value was not used when executing functions/triggers. But when
replicating from buggy versions to 5.1.12 or newer, which will
use the INSERT_ID value in functions/triggers, the erroneous
value will be used, which would cause duplicate entry error and
cause the slave to stop.

The patch for 5.1 fixed it to ignore the SET INSERT_ID value when
executing functions/triggers if it is replicating from a master
of buggy versions, another patch for 5.0 fixed it not to generate
the erroneous Intvar event.

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.1-rpl

Problem: rpl_variables_stm.test used a character set and a collation which
are not included on all platforms.
Fix: replace the character set and collation by ones that are included on
all platforms. (rpl_variables_stm does not rely on which character set is
used, the only important aspect is the fact that it changes.)

The reason is that we are using a sleep to wait for slave to reach the
slave_transaction_retries limit.
Fix: wait for the slave to stop instead. This is what we want to do, since
the slave stops when the limit is reached.

safe.
Fix: Move sql_mode: from the section of the test where safe variables are
tested, to the section where unsafe variables are tested.

Affected tests fixing. After the fix for st_relay_log_info::wait_for_pos() that
handles widely used select('master-bin.xxxx',pos) invoked by mysqltest
there appeared to be four tests that either tried synchronizing when
the slave was stopped or used incorrect synchronization method like
to call `sync_with_master' from the current connection being to the
master itself.

Fixed with correcting the current connection or/and using the correct
synchronization macro when possible.

Problem: in mixed and statement mode, a query that refers to a
system variable will use the slave's value when replayed on
slave. So if the value of a system variable is inserted into a
table, the slave will differ from the master.
Fix: mark statements that refer to a system variable as "unsafe",
meaning they will be replicated by row in mixed mode and produce a warning
in statement mode. There are some exceptions: some variables are actually
replicated. Those should *not* be marked as unsafe.
BUG#34732: mysqlbinlog does not print default values for auto_increment variables
Problem: mysqlbinlog does not print default values for some variables,
including auto_increment_increment and others. So if a client executing
the output of mysqlbinlog has different default values, replication will
be wrong.
Fix: Always print default values for all variables that are replicated.
I need to fix the two bugs at the same time, because the test cases would
fail if I only fixed one of them.

merging and post-make-test changes.

Merge mysql1000.(none):/home/andrei/MySQL/FIXES/5.1/bug22234-Extra_Slave_Col_Slave_should_stop_on_Error_Field
into  mysql1000.(none):/home/andrei/MySQL/MERGE/5.1

into  mysql1000.(none):/home/andrei/MySQL/MERGE/5.1

There was a failure in that show slave status displayed a wrong message
when slave stopped at processing a row event inserting to a default-less
column.

The problem seem to have ceased after recent fixes in rbr code.
However, the test was not updated to carry testing of the case commented-out.

Uncommenting and editing the test.
Notice, Bug#23907 is most probably a duplicate of this one.

MASTER_POS_WAIT return values are different than expected when the server is not a slave. 
It returns -1 instead of NULL.

Fixed with correcting  st_relay_log_info::wait_for_pos() to return the proper
value in the case of rli info is not inited.

into  pilot.mysql.com:/data/msvensson/mysql/mysql-5.1-rpl

There was no way to see if report-{host,port,user,password} were set up.

Fixed with introducing new global variables.
The variables are made read-only because of a possible need to change them
most probably require the slave server restart.

Todo: transform the startup options to be CHANGE master parameters - i.e
to deprecate `report-' options, and to change the new vars 
to be updatable at time of CHANGE master executes with new
values.

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.1-rpl

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.1-rpl

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.0-rpl

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.1-rpl

into  pilot.mysql.com:/data/msvensson/mysql/mysql-5.1

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.1-rpl

into  trift2.:/MySQL/M51/mysql-5.1

into  quad.:/mnt/raid/alik/MySQL/devel/5.1-rt

into  mysql.com:/Users/davi/mysql/mysql-5.1-runtime

READ_ONLY token was accidentally placed into wrong place
('ident' rule). The proper place is in the 'keyword_sp' rule.

The manual should be re-generated after this patch, because
the manual depends on the 'keyword_sp' rule.