even if called from binlog_rollback()

instead use only one (trx) IO_CACHE and truncate it if the
statement is rolled back.

don't use binlog_cache_mngr to accumulate the data,
use binlog_cache_data instead.

(binlog_cache_data owns one IO_CACHE, binlog_cache_mngr owns
two binlog_cache_data's, trx and stmt).

because ALTER TABLE ... DROP SYSTEM VERSIONING
is not just a change in the table structure, it also deletes
all historical rows

also

* don't modify write_set
* backup/restore rpl_write_set

so any other value of ALGORITHM or LOCK disables online alter

ht->start_consistent_snapshot() is also not a way,
because some engines (e.g. rocksdb) only do it readonly.
instead, downgrade the lock after reading the first row
(which implicitly opens a read view).

no functional changes here

two new tests:
* alter table times out because of a long concurrent trx
* alter table adds a column in the middle

* Log rows in online_alter_binlog.
* Table online data is replicated within dedicated binlog file
* Cached data is written on commit.
* Versioning is fully supported.
* Works both wit and without binlog enabled.

* For now savepoints setup is forbidden while ONLINE ALTER goes on.
  Extra support is required. We can simply log the SAVEPOINT query events
  and replicate them together with row events. But it's not implemented
  for now.

* Cache flipping:

  We want to care for the possible bottleneck in the online alter binlog
  reading/writing in advance.

  IO_CACHE does not provide anything better that sequential access,
  besides, only a single write is mutex-protected, which is not suitable,
  since we should write a transaction atomically.

  To solve this, a special layer on top Event_log is implemented.
  There are two IO_CACHE files underneath: one for reading, and one for
  writing.

  Once the read cache is empty, an exclusive lock is acquired (we can wait
  for a currently active transaction finish writing), and flip() is emitted,
  i.e. the write cache is reopened for read, and the read cache is emptied,
  and reopened for writing.

  This reminds a buffer flip that happens in accelerated graphics
  (DirectX/OpenGL/etc).

  Cache_flip_event_log is considered non-blocking for a single reader and a
  single writer in this sense, with the only lock held by reader during flip.

  An alternative approach by implementing a fair concurrent circular buffer
  is described in MDEV-24676.

* Cache managers:
  We have two cache sinks: statement and transactional.
  It is important that the changes are first cached per-statement and
  per-transaction.
  If a statement fails, then only statement data is rolled back. The
  transaction moves along, however.

  Turns out, there's no guarantee that TABLE well persist in
  thd->open_tables to the transaction commit moment.
  If an error occurs, tables from statement are purged.
  Therefore, we can't store te caches in TABLE. Ideally, it should be
  handlerton, but we cut the corner and store it in THD in a list.

Event_log is supposed to be a basic logging class that can write events in
a single file.

MYSQL_BIN_LOG in comparison will have:
* rotation support
* index files
* purging
* gtid and transactional information handling.
* is dedicated for a general-purpose binlog

* Eliminate most usages of THD::use_trans_table. Only 3 left, and they are
  at quite high levels, and really essential.
* Eliminate is_transactional argument when possible. Lots of places are
  left though, because of some WSREP error handling in
  MYSQL_BIN_LOG::set_write_error.
* Remove junk binlog functions from THD
* binlog_prepare_pending_rows_event is moved to log.cc inside MYSQL_BIN_LOG
  and is not anymore template. Instead it accepls event factory with a type
  code, and a callback to a constructing function in it.

pump up binlog and cache manager to level of binlog_log_row_internal

1. Change m_size to uint. This removes some implicit conversions.
  See unpack_row, for instance:
  uint max_cols= MY_MIN(tabledef->size(), cols->n_bits);
2. Improve table_def memory layout by reordering columns

alter_table_online -> alter_table_locknone
gis-alter_table_online -> gis-alter_table

it was redundant, duplicating vcol_type == VCOL_GENERATED_STORED.

Note that VCOL_DEFAULT is not "stored", "stored vcol" means that after
rnd_next or index_read/etc the field value is already in the record[0]
and does not need to be calculated separately

unpack_row() must calculate all stored and indexed vcols
(in fill_extra_persistent_columns()).

Also Update and Delete row events must mark in read_set
all columns needed for calculating all stored and indexed vcols.

If it's done properly in do_apply_event(), it no longer needs
to be repeated per row.

it was created to handle the case of the concurrent
inplace add index. So it should only work in that case,
otherwise it's doing server's job (marks virtual column dependencies)
and hides server's bugs. And it was redundant.

it checks the version and activates after 11.2.0.
Now result files are the same as in 11.1

create_table_impl() doesn't need to search for a temporary table
when the table_name is like #sql-xxx

MDEV-31618: Server crashes in process_i_s_table_temporary_tables/get_all_tables after alter in rename query

Any TMP_TABLE_SHARE must always have at least one TABLE instance.
So whenever a temporary TABLE that is marked for reopen is closed,
reopen it at once if its TMP_TABLE_SHARE list of tables becomes empty.

- Fix MSAN uninitialized value error, obtained by calling handlerton's
`info()`, and referencing uninitialized `errkey`.
- Reviewer: serg@mariadb.com

- Pre-open temporary table on sequence creation.
- Without this patch, if rename alter is done on the temporary sequence,
  and after that `create replace`, since table is not preopened and
  alter rename marked the table as reopen, and such table is deleted in
  the `find_temporary_table()` leaving the share without the table, that
  causes `show tables` to fail
- Closes PR #2685
- Reviewer: <serg@mariadb.com>

* IS_USER_TEMP_TABLE() was misleading, name didn't match the code
* list of temp tables was rescanned number_of_databases times
* some temporary tables were not shown (from nonexistent databases)
* some temporary tables were shown more than once (e.g. after self-joins)
* sys.table_exists() - avoid querying I_S twice
* fix handling of temporary MERGE tables - it's pointless to fully open
  them, they're not in thd->temporary_tables, so they simply fail to
  open and are skipped. Relax the assertion instead.

MDEV-28343: sys.create_synonym_db fails with ER_VIEW_SELECT_TMPTABLE when schema contains temporary tables

- MDEV-28342 raised the error in case temporary table shadows base table
- Now we are allowed to shadow base tables with temporary tables and
`sys.create_synonym_db()` can easily check for existance of temporary table and
ignore view creation, since it is not supported to create view from
temporary table.
Reviewed-by: &lt;monty@mariadb.org&gt;, <vicentiu@mariadb.org>

Reviewed-by: <vicentiu@mariadb.org>

This commit updates sysschema to work with the new behaviour of show
tables and information_schema.tables table showing temporary tables for
current connection.
Co-authored-by: Monty <monty@mariadb.org>
Reviewer: <vicentiu@mariadb.org>

Additionally fixes the bugs uncovered in:
  - `MDEV-28332: Alter on temporary table causes ER_TABLE_EXISTS_ERROR note`
    Since there is no `warning` issued by shadowing of base table, this MDEV
    is irrelevant. Keeping for review purposes and for future development
    in case shadowing is going to be implemented
  - `MDEV-28334: SHOW TABLE STATUS shows all temporary tables ignoring database and conditions`
  - `MDEV-28453: SHOW commands are inconsistent for temporary tables`

Reviewed by: <monty@mariadb.org>,
             <vicentiu@mariadb.org>

Reviewer: <vicentiu@mariadb.org>

This bug report was caused by implementation of the task MDEV-5816
(Stored programs: validation of stored program statements).
Changing metadata of a table that has a trigger on AFTER UPDATE or AFTER DELETE
resulted in unexpected output of the error ER_TRG_NO_SUCH_ROW_IN_TR.
It was caused by the fact that characteristics of the trigger dependent on
changed table's metadata wasn't set in a new lex object created on re-parsing
of a failing trigger statement.

To fix the bug the data member lex->trg_chistics.action_time and
lex->trg_chistics.event must be set into real values of the trigger
whose statement being re-parsed.