Submitted by:	Stewart Smith (via internals@lists.mysql.com)

rb://532 approved by Sunny Bains

Do not use the same maintainer mode flags for both GCC and ICC.
The -Wall option for ICC enables more warnings than its GCC
counterpart.

DROP/CREATE SCHEMA, CREATE TABLE, REPAIR.

The cause of assert was concurrent execution of
DROP DATABASE and REPAIR TABLE where first statement
deleted table's file .TMD at the same time as
REPAIR TABLE tried to read file details from the old file
that was just removed.

Additionally was fixed trouble when DROP TABLE try delete
all files belong to table being dropped at the same time
when REPAIR TABLE statement has just deleted .TMD file.

No regression test added because this would require adding a
sync point to mysys/my_redel.c. Since this bug is not present in
5.5+, adding test coverage was considered unnecessary.
The patch has been verified using RQG testing.


sql/sql_db.cc:
  mysql_rm_known_files() modified: ignore possible ENOENT error
  when trying delete all table's files. Such aggressive 
  algorithm permits skip already deleted (in another thread)
  files.
  
  Installation of Drop_table_error_handler as internal error handler
  moved from mysql_rm_db() to mysql_rm_knowns_files() near to place
  where source of possible errors (call to mysql_rm_table_part2) located.
storage/myisam/mi_check.c:
  mi_repair() was modified: set param->retry_repair= 0
  in order to don't call following failover procedure
  in ha_myisam::repair().

mysqltest checks if the stmt is one that should be run in ps mode,
  but regexp doesn't match if preceeded by /* */ comment.
Fix: match function will jump over /*..*/ if found at start

Backported use of setenv() from 5.5
This will remove the leak on systems that have setenv()
I have not fixed the string.c leak, it's a local variable
   that the cleanup function cannot access.

Fixed some errors
Added note about 'no' prefix to options
See also follow-up comment to bug report

 my_seek() and my_tell() functions now honour MY_WME flag.


include/mysys_err.h:
  Fix for bug#48451: my_seek and my_tell ignore MY_WME flag
    - EE_CANT_SEEK added, used in my_seek() and my_tell() functions.
mysys/errors.c:
  Fix for bug#48451: my_seek and my_tell ignore MY_WME flag
    - EE_CANT_SEEK added, used in my_seek() and my_tell() functions.
mysys/my_seek.c:
  Fix for bug#48451: my_seek and my_tell ignore MY_WME flag
    - my_seek() and my_tell() handle MY_WME flag.
mysys/my_symlink.c:
  Fix for bug#48451: my_seek and my_tell ignore MY_WME flag
    - __attribute__((unused)) removed, as myf MyFlags is
  actually used in the my_realpath() function.
storage/myisam/ha_myisam.cc:
  Fix for bug#48451: my_seek and my_tell ignore MY_WME flag
    - check my_seek() result.

Automerging bzr bundle from bug report into latest 
mysql-5.1-bugteam.

Fixing test case that fails on Windows because .dll is used.

When installing plugins, there is a missing check
for slash (/) in the path on Windows. Note that on
Windows, both / and \ can be used to separate
directories.

This patch fixes the issue by:
- Adding a FN_DIRSEP symbol for all platforms
  consisting of a string of legal directory
  separators.
- Adding a charset-aware version of strcspn().
- Adding a check_valid_path() function that uses
  my_strcspn() to check if any FN_DIRSEP character
  is in the supplied string.
- Using the check_valid_path() function in
  sql_plugin.cc and sql_udf.cc (which means
  replacing the existing test there).

include/config-netware.h:
  Adding FN_DIRSEP
  ******
  Adding FN_DIRSEP
include/config-win.h:
  Adding FN_DIRSEP
  ******
  Adding FN_DIRSEP
include/m_ctype.h:
  Adding my_strspn() and my_strcspn().
  
  ******
  Adding my_strspn() and my_strcspn().
include/my_global.h:
  Adding FN_DIRSEP
  ******
  Adding FN_DIRSEP
mysql-test/t/plugin_not_embedded.test:
  Adding test that file names containing / is
  disallowed on *all* platforms.
  ******
  Adding test that file names containing / is
  disallowed on *all* platforms.
sql/sql_plugin.cc:
  Introducing check_if_path() function for
  checking if filename is a path to include
  / on Windows.
  ******
  Introducing check_if_path() function for
  checking if filename is a path to include
  / on Windows.
sql/sql_udf.cc:
  Switching to use check_if_path() function.
  ******
  Switching to use check_if_path() function.
strings/my_strchr.c:
  Adding my_strspn() and my_strcspn().
  ******
  Adding my_strspn() and my_strcspn().

I am not fixing the test failure
Adds printing of my_errno when commands fail, could hopefully help

This bogus assertion was introduced in the fix of Bug #57802:
Empty ASSERTION parameter passed to the HASH_SEARCH macro.

Fixing the testcase to use the database name
as connected_db instead of 'test' database.

mysql-test/r/mysql.result:
  Additional fix in the test for bug#54899.
mysql-test/t/mysql.test:
  Additional fix in the test for bug#54899.

integral type. Use intptr which is designed to hold pointer values
and pass it to off_t.

mysys/stacktrace.c:
  Add a compile time assert to ensure that off_t is large enough
  to hold the pointer value.

    
Code cleanup after changes for Bug 56628.  The general approach for 
InnoDB is to make a reference to each enum value whenever it is used in a
switch statement.  In addition, no default case should be used for switch 
statements on enum types.  This assures that if there is ever any change 
in the enum values, the switch will need to change to reflect it since a 
compiler warning will occur.  In this case, the enum row_type is declared 
in handler.h and could be changed for another storage engine.  If so, a 
warning will occur in the InnoDB build.  

Other changes;
* This patch uses 2 macros to help consolidate warning messages that
   need to occur twice in the single switch for row_format.
* Using row_format as the variable name to distinguish it from the enum
  type.
* Function declaration format correction.

When using BINLOG statement to execute rows log events, session variables
foreign_key_checks and unique_checks are changed temporarily.  As each rows
log event has their own special session environment and its own
foreign_key_checks and unique_checks can be different from current session
which executing the BINLOG statement. But these variables are not restored
correctly after BINLOG statement. This problem will cause that the following
statements fail or generate unexpected data.

In this patch, code is added to backup and restore these two variables.
So BINLOG statement will not affect current session's variables again.


mysql-test/extra/binlog_tests/binlog.test:
  Add test to verify this patch.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
  Add test to verify this patch.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
  Add test to verify this patch.
sql/sql_binlog.cc:
  Add code to backup and restore thd->options.

win x86 debug_max

The windows MTR run exhibited a different test execution 
ordering (due to the fact that in these platforms MTR is invoked
with --parallel > 1). This uncovered a bug in the aforementioned
test case, which is triggered by the following conditions:

  1. server is not restarted between two different tests;
  2. the test before binlog.binlog_row_failure_mixing_engines
     issues flush logs;
  3. binlog.binlog_row_failure_mixing_engines uses binlog
     positions to limit the output of show_binlog_events;
  4. binlog.binlog_row_failure_mixing_engines does not state which
     binlog file to use, thence it uses a wrong binlog file with
     the correct position.

There are two possible fixes: 1. make sure that the test start 
from a clean slate - binlog wise; 2. in addition to the position, 
also state the binary log file before sourcing 
show_binlog_events.inc .

We go for fix #1, ie, deploy a RESET MASTER before the test is 
actually started.

The problem is that the logic which checks if a pointer is
valid relies on a poor heuristic based on the start and end
addresses of the data segment and heap.

Apart from miscalculating the heap bounds, this approach also
suffers from the fact that memory can come from places other
than the heap. See Bug#58528 for a more detailed explanation.

On Linux, the solution is to access the process's memory
through /proc/self/task/<tid>/mem, which allows for retrieving
the contents of pages within the virtual address space of
the calling process. If a address range is not mapped, a
input/output error is returned.

client/mysqltest.cc:
  Use new interface to my_safe_print_str.
include/my_stacktrace.h:
  Drop name from my_safe_print_str.
mysys/stacktrace.c:
  Access the process's memory through a file descriptor and
  dump the contents of the memory range. The file descriptor
  offset is equivalent to a offset into the address space.
  
  Do not print the name of the variable associated with the
  address. It can be better accomplished at a higher level.
sql/mysqld.cc:
  Put the variable dumping information within its own newline block.
  Use symbolic names which better convey information to the user.

the DROP statement ..."
      
Problem: When using temporary tables and closing a session, an
implicit DROP TEMPORARY TABLE IF EXISTS is written to the binary
log (while cleaning up the context of the session THD - see:
sql_class.cc:THD::cleanup which calls close_temporary_tables).
     
close_temporary_tables, first checks if the binary log is opened
and then proceeds to creating the DROP statements. Then, such
statements, are written to the binary log through
MYSQL_BIN_LOG::write(Log_event *). Inside, there is another check
if the binary log is opened and if not an error is returned. This
is where the faulty behavior is triggered. Given that the test
case replays a binary log, with temp tables statements, and right
after it issues RESET MASTER, there is a chance that is_open will
report false (when the mysql session is closed and the temporary
tables are written).
      
is_open may return false, because MYSQL_BIN_LOG::reset_logs is
not setting the correct flag (LOG_CLOSE_TO_BE_OPENED), on the
MYSQL_LOG_BIN::log_state (instead it sets just the
LOG_CLOSE_INDEX flag, leaving the log_state to
LOG_CLOSED). Thence, when writing the DROP statement as part of
the THD::cleanup, the thread could get a return value of false
for is_open - inside MYSQL_BIN_LOG::write, ultimately reporting
that it can't write the event to the binary log.
      
Fix: We fix this by adding the correct flag, missing in the
second close.

mysql-test/r/show_check.result:
  Fixed corrupted result file

metadata"
            
Improved error handling such that queries against Information_Schema.Tables won't
fail if a federated table can't make a remote connection.

mysql-test/r/merge.result:
  Updated with warnings that were previously masked.
mysql-test/r/show_check.result:
  Updated with warnings that were previously masked.
mysql-test/r/view.result:
  Updated with warnings that were previously masked.
sql/sql_show.cc:
  If get_schema_tables_record() encounters an error, push a warning,
  set the TABLE COMMENT column with the error text, and clear the
  error so that the operation can continue.

Improved error handling such that queries against Information_Schema.Tables won't
fail if a Federated table is unable to connect to remote host.



sql/sql_show.cc:
  If Handler::Info() fails, save error text in TABLE COMMENTS column, clear error.

will not display "indicated result file not found" due to wrongly named
var directory.

Problem: MySQL cp1251 did not support 'U+20AC EURO SIGN'
which was assigned a few years ago to 0x88.

Fix: adding mapping: 0x88 <-> U+20AC 

  @ mysql-test/include/ctype_8bit.inc
  New shared file to test 8bit character sets.

  @ mysql-test/r/ctype_cp1251.result
  @ mysql-test/t/ctype_cp1251.test
  Adding tests

  @ sql/share/charsets/cp1251.xml
  Adding mapping

  @ strings/ctype-extra.c
  Regenerating ctype-extra.c using strings/conf_to_src
  according to new cp1251.xml

After dropping and recreating the database specified along with --one-database
option at command line, mysql client keeps filtering the statements even after
the execution of a 'USE' command on the same database.

--one-database option enables the filtering of statements when the current
database is not the one specified at the command line. However, when the same
database is dropped and recreated the variable (current_db) that holds the
inital database name gets altered. This bug exploits the fact that current_db
initially gets set to null value (0) when a 'use db_name' follows the recreation
of same database db_name (speficied at the command line) and hence skip_updates
gets set to 1, which inturn triggers the further filtering of statements.

Fixed by making get_current_db() a no-op function when one_database is set,
and hence, under that condition current_db will not get altered.
Note, however the value of current_db can change when we execute 'connect'
command with a differnet database to reconnect to the server, in which case,
the behavior of --one-database will be formulated using this new database.


client/mysql.cc:
  Bug #54899 : --one-database option cannot handle DROP/CREATE DATABASE commands
  
  Added an if statement at the beginnning of get_current_db() , which makes it
  a no-op function if one-database option is specified, and hence current_db
  remains unchanged.
  
  Changed the help message for one-database option to a more appropriate message
  as specified in mysql documentation.
mysql-test/r/mysql.result:
  Added a test case for bug#54899 and some more test cases to
  check other one-database option related behaviors.
mysql-test/t/mysql.test:
  Added a test case for bug#54899 and some more test cases to
  check other one-database option related behaviors.