An error occurred fetching the project authors.
  1. 31 Jan, 2008 1 commit
  2. 30 Jan, 2008 1 commit
  3. 06 Jan, 2008 1 commit
  4. 21 Dec, 2007 2 commits
    • aelkin/elkin@koti.dsl.inet.fi's avatar
      BUG#30435 loading large LOAD DATA INFILE breaks slave with · 0ca3250e
      aelkin/elkin@koti.dsl.inet.fi authored
                read_buffer_size set on master
      BUG#33413 show binlog events fails if binlog has event size of close
                to max_allowed_packet
      
      
      The size of Append_block replication event was determined solely by
      read_buffer_size whereas the rest of replication code deals with
      max_allowed_packet.
      When the former parameter was set to larger than the latter there were
      two artifacts: the master could not read events from binlog;
      show master events did not show.
      
      Fixed with 
      - fragmenting the used io-cached buffer into pieces each size of less
        than max_allowed_packet (bug#30435)
      - incrementing show-binlog-events handling thread's max_allowed_packet
        with the max estimated for the replication header size
      0ca3250e
    • aelkin/elkin@koti.dsl.inet.fi's avatar
      Bug #31359 change_master sets group_master_log_pos twice, · 10320385
      aelkin/elkin@koti.dsl.inet.fi authored
                  ignores future_group_master_log_p
      
      There was a redundant assignement. However, that's the only artifact.
      Wrt to future_group_master_log_position, there is no issue.
      The counter is supposed to be set at Log_event::exec_event().
      It's used only by Innodb for recovery purposes.
      10320385
  5. 10 Oct, 2007 1 commit
  6. 03 Oct, 2007 1 commit
    • sven@murkla.(none)'s avatar
      BUG#30752 rpl_dual_pos_advance valgrind (jump depends on uninitialized LOG_INFO) · 5daff654
      sven@murkla.(none) authored
      Problem: one thread could read uninitialized memory from (the stack of) another
      thread.
      Fix: swapped order of initializing the memory and making it available to the
      other thread.
      Fix: put lock around the statement that makes the memory available to the other
      thread.
      Fix: all fields of the struct are now initialized in the constructor, to avoid
      future problems.
      5daff654
  7. 16 Aug, 2007 2 commits
  8. 05 Jul, 2007 1 commit
  9. 09 Jun, 2007 1 commit
    • mats@kindahl-laptop.dnsalias.net's avatar
      BUG#24954 (Last_errno and Last_error not set after master_retry_count was reached): · 9094e97a
      mats@kindahl-laptop.dnsalias.net authored
      Adding new fields Last_{IO,SQL}_Errno and Last_{IO,SQL}_Error to output
      of SHOW SLAVE STATUS to hold errors from I/O and SQL thread respectively.
      Old fields Last_Error and Last_Errno are aliases for Last_SQL_Error and
      Last_SQL_Errno respectively.
      
      Fields are added last to output of SHOW SLAVE STATUS to allow old applications
      to use the same positional arguments into the row, while allowing new
      application to benefit from the added information.
      
      In addition, some new error codes are added (especially for the I/O
      thread) to be able to provide sensible error message.
      9094e97a
  10. 24 May, 2007 1 commit
    • msvensson@pilot.blaudden's avatar
      Bug#26664 test suite times out on OS X 64bit · 93b1fe65
      msvensson@pilot.blaudden authored
       - The "mysql client in mysqld"(which is used by
         replication and federated) should use alarms instead of setting
         socket timeout value if the rest of the server uses alarm. By
         always calling 'my_net_set_write_timeout'
         or 'my_net_set_read_timeout' when changing the timeout value(s), the
         selection whether to use alarms or timeouts will be handled by
         ifdef's in those two functions. 
       - Move declaration of 'vio_timeout' into "vio_priv.h"
      93b1fe65
  11. 10 May, 2007 1 commit
    • monty@mysql.com/narttu.mysql.fi's avatar
      WL#3817: Simplify string / memory area types and make things more consistent (first part) · 088e2395
      monty@mysql.com/narttu.mysql.fi authored
      The following type conversions was done:
      
      - Changed byte to uchar
      - Changed gptr to uchar*
      - Change my_string to char *
      - Change my_size_t to size_t
      - Change size_s to size_t
      
      Removed declaration of byte, gptr, my_string, my_size_t and size_s. 
      
      Following function parameter changes was done:
      - All string functions in mysys/strings was changed to use size_t
        instead of uint for string lengths.
      - All read()/write() functions changed to use size_t (including vio).
      - All protocoll functions changed to use size_t instead of uint
      - Functions that used a pointer to a string length was changed to use size_t*
      - Changed malloc(), free() and related functions from using gptr to use void *
        as this requires fewer casts in the code and is more in line with how the
        standard functions work.
      - Added extra length argument to dirname_part() to return the length of the
        created string.
      - Changed (at least) following functions to take uchar* as argument:
        - db_dump()
        - my_net_write()
        - net_write_command()
        - net_store_data()
        - DBUG_DUMP()
        - decimal2bin() & bin2decimal()
      - Changed my_compress() and my_uncompress() to use size_t. Changed one
        argument to my_uncompress() from a pointer to a value as we only return
        one value (makes function easier to use).
      - Changed type of 'pack_data' argument to packfrm() to avoid casts.
      - Changed in readfrm() and writefrom(), ha_discover and handler::discover()
        the type for argument 'frmdata' to uchar** to avoid casts.
      - Changed most Field functions to use uchar* instead of char* (reduced a lot of
        casts).
      - Changed field->val_xxx(xxx, new_ptr) to take const pointers.
      
      Other changes:
      - Removed a lot of not needed casts
      - Added a few new cast required by other changes
      - Added some cast to my_multi_malloc() arguments for safety (as string lengths
        needs to be uint, not size_t).
      - Fixed all calls to hash-get-key functions to use size_t*. (Needed to be done
        explicitely as this conflict was often hided by casting the function to
        hash_get_key).
      - Changed some buffers to memory regions to uchar* to avoid casts.
      - Changed some string lengths from uint to size_t.
      - Changed field->ptr to be uchar* instead of char*. This allowed us to
        get rid of a lot of casts.
      - Some changes from true -> TRUE, false -> FALSE, unsigned char -> uchar
      - Include zlib.h in some files as we needed declaration of crc32()
      - Changed MY_FILE_ERROR to be (size_t) -1.
      - Changed many variables to hold the result of my_read() / my_write() to be
        size_t. This was needed to properly detect errors (which are
        returned as (size_t) -1).
      - Removed some very old VMS code
      - Changed packfrm()/unpackfrm() to not be depending on uint size
        (portability fix)
      - Removed windows specific code to restore cursor position as this
        causes slowdown on windows and we should not mix read() and pread()
        calls anyway as this is not thread safe. Updated function comment to
        reflect this. Changed function that depended on original behavior of
        my_pwrite() to itself restore the cursor position (one such case).
      - Added some missing checking of return value of malloc().
      - Changed definition of MOD_PAD_CHAR_TO_FULL_LENGTH to avoid 'long' overflow.
      - Changed type of table_def::m_size from my_size_t to ulong to reflect that
        m_size is the number of elements in the array, not a string/memory
        length.
      - Moved THD::max_row_length() to table.cc (as it's not depending on THD).
        Inlined max_row_length_blob() into this function.
      - More function comments
      - Fixed some compiler warnings when compiled without partitions.
      - Removed setting of LEX_STRING() arguments in declaration (portability fix).
      - Some trivial indentation/variable name changes.
      - Some trivial code simplifications:
        - Replaced some calls to alloc_root + memcpy to use
          strmake_root()/strdup_root().
        - Changed some calls from memdup() to strmake() (Safety fix)
        - Simpler loops in client-simple.c
      088e2395
  12. 12 Apr, 2007 1 commit
    • mats@romeo.(none)'s avatar
      BUG#25688 (RBR: circular replication may cause STMT_END_F flags to be · 11fc24ef
      mats@romeo.(none) authored
      skipped):
      
      By moving statement end actions from Rows_log_event::do_apply_event() to
      Rows_log_event::do_update_pos() they will always be executed, even if
      Rows_log_event::do_apply_event() is skipped because the event originated
      at the same server. This because Rows_log_event::do_update_pos() is always
      executed (unless Rows_log_event::do_apply_event() failed with an error,
      in which case the slave stops with an error anyway). 
      
      Adding test case.
      
      Fixing logic to detect if inside a group. If a rotate event occured
      when an initial prefix of events for a statement, but for which the
      table did contain a key, last_event_start_time is set to zero, causing
      rotate to end the group but without unlocking any tables. This left a
      lock hanging around, which subsequently triggered an assertion when a
      second attempt was made to lock the same sequence of tables.
      
      In order to solve the above problem, a new flag was added to the relay
      log info structure that is used to indicate that the replication thread
      is currently executing a statement. Using this flag, the replication
      thread is in a group if it is either in a statement or inside a trans-
      action.
      
      The patch also eliminates some gratuitous header file inclusions that
      were not needed (and caused compile errors) and replaced them with
      forward definitions.
      11fc24ef
  13. 29 Mar, 2007 1 commit
  14. 22 Mar, 2007 1 commit
  15. 02 Mar, 2007 1 commit
    • antony@ppcg5.local's avatar
      WL#2936 · dc24473c
      antony@ppcg5.local authored
        "Server Variables for Plugins"
        Implement support for plugins to declare server variables.
        Demonstrate functionality by removing InnoDB specific code from sql/*
        New feature for HASH - HASH_UNIQUE flag
        New feature for DYNAMIC_ARRAY - initializer accepts preallocated ptr.
        Completed support for plugin reference counting.
      dc24473c
  16. 01 Mar, 2007 1 commit
  17. 28 Feb, 2007 1 commit
  18. 27 Feb, 2007 1 commit
  19. 03 Feb, 2007 1 commit
    • rafal@quant.(none)'s avatar
      BUG#25306 (Race conditions during replication slave shutdown (valgrind stacks)): · b50f3c31
      rafal@quant.(none) authored
      The possibility of the race is removed by changing sequence of calls
      
        pthread_mutex_unlock(&mi->run_lock);
        pthread_cond_broadcast(&mi->stop_cond);  
      
      into
      
        pthread_cond_broadcast(&mi->stop_cond);
        pthread_mutex_unlock(&mi->run_lock);
      
      at the end of I/O thread (similar change at the end of SQL thread). This ensures 
      that no thread waiting on the condition executes between the broadcast and the 
      unlock and thus can't delete the mi structure which caused the bug.
      b50f3c31
  20. 29 Jan, 2007 1 commit
  21. 31 Dec, 2006 1 commit
    • kent@mysql.com/kent-amd64.(none)'s avatar
      my_strtoll10-x86.s: · 6523aca7
      kent@mysql.com/kent-amd64.(none) authored
        Corrected spelling in copyright text
      Makefile.am:
        Don't update the files from BitKeeper
      Many files:
        Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header
        Adjusted year(s) in copyright header 
      Many files:
        Added GPL copyright text
      Removed files:
        Docs/Support/colspec-fix.pl
        Docs/Support/docbook-fixup.pl
        Docs/Support/docbook-prefix.pl
        Docs/Support/docbook-split
        Docs/Support/make-docbook
        Docs/Support/make-makefile
        Docs/Support/test-make-manual
        Docs/Support/test-make-manual-de
        Docs/Support/xwf
      6523aca7
  22. 23 Dec, 2006 1 commit
  23. 20 Nov, 2006 1 commit
    • monty@mysql.com/nosik.monty.fi's avatar
      Remove compiler warnings · e8258798
      monty@mysql.com/nosik.monty.fi authored
      (Mostly in DBUG_PRINT() and unused arguments)
      Fixed bug in query cache when used with traceing (--with-debug)
      Fixed memory leak in mysqldump
      Removed warnings from mysqltest scripts (replaced -- with #)
      e8258798
  24. 12 Nov, 2006 1 commit
  25. 31 Oct, 2006 1 commit
  26. 13 Oct, 2006 1 commit
  27. 11 Sep, 2006 1 commit
  28. 04 Sep, 2006 1 commit
  29. 04 Jun, 2006 1 commit
    • monty@mysql.com's avatar
      This changeset is largely a handler cleanup changeset (WL#3281), but includes... · 74cc73d4
      monty@mysql.com authored
      This changeset is largely a handler cleanup changeset (WL#3281), but includes fixes and cleanups that was found necessary while testing the handler changes
      
      Changes that requires code changes in other code of other storage engines.
      (Note that all changes are very straightforward and one should find all issues
      by compiling a --debug build and fixing all compiler errors and all
      asserts in field.cc while running the test suite),
      
      - New optional handler function introduced: reset()
        This is called after every DML statement to make it easy for a handler to
        statement specific cleanups.
        (The only case it's not called is if force the file to be closed)
      
      - handler::extra(HA_EXTRA_RESET) is removed. Code that was there before
        should be moved to handler::reset()
      
      - table->read_set contains a bitmap over all columns that are needed
        in the query.  read_row() and similar functions only needs to read these
        columns
      - table->write_set contains a bitmap over all columns that will be updated
        in the query. write_row() and update_row() only needs to update these
        columns.
        The above bitmaps should now be up to date in all context
        (including ALTER TABLE, filesort()).
      
        The handler is informed of any changes to the bitmap after
        fix_fields() by calling the virtual function
        handler::column_bitmaps_signal(). If the handler does caching of
        these bitmaps (instead of using table->read_set, table->write_set),
        it should redo the caching in this code. as the signal() may be sent
        several times, it's probably best to set a variable in the signal
        and redo the caching on read_row() / write_row() if the variable was
        set.
      
      - Removed the read_set and write_set bitmap objects from the handler class
      
      - Removed all column bit handling functions from the handler class.
        (Now one instead uses the normal bitmap functions in my_bitmap.c instead
        of handler dedicated bitmap functions)
      
      - field->query_id is removed. One should instead instead check
        table->read_set and table->write_set if a field is used in the query.
      
      - handler::extra(HA_EXTRA_RETRIVE_ALL_COLS) and
        handler::extra(HA_EXTRA_RETRIEVE_PRIMARY_KEY) are removed. One should now
        instead use table->read_set to check for which columns to retrieve.
      
      - If a handler needs to call Field->val() or Field->store() on columns
        that are not used in the query, one should install a temporary
        all-columns-used map while doing so. For this, we provide the following
        functions:
      
        my_bitmap_map *old_map= dbug_tmp_use_all_columns(table, table->read_set);
        field->val();
        dbug_tmp_restore_column_map(table->read_set, old_map);
      
        and similar for the write map:
      
        my_bitmap_map *old_map= dbug_tmp_use_all_columns(table, table->write_set);
        field->val();
        dbug_tmp_restore_column_map(table->write_set, old_map);
      
        If this is not done, you will sooner or later hit a DBUG_ASSERT
        in the field store() / val() functions.
        (For not DBUG binaries, the dbug_tmp_restore_column_map() and
        dbug_tmp_restore_column_map() are inline dummy functions and should
        be optimized away be the compiler).
      
      - If one needs to temporary set the column map for all binaries (and not
        just to avoid the DBUG_ASSERT() in the Field::store() / Field::val()
        methods) one should use the functions tmp_use_all_columns() and
        tmp_restore_column_map() instead of the above dbug_ variants.
      
      - All 'status' fields in the handler base class (like records,
        data_file_length etc) are now stored in a 'stats' struct. This makes
        it easier to know what status variables are provided by the base
        handler.  This requires some trivial variable names in the extra()
        function.
      
      - New virtual function handler::records().  This is called to optimize
        COUNT(*) if (handler::table_flags() & HA_HAS_RECORDS()) is true.
        (stats.records is not supposed to be an exact value. It's only has to
        be 'reasonable enough' for the optimizer to be able to choose a good
        optimization path).
      
      - Non virtual handler::init() function added for caching of virtual
        constants from engine.
      
      - Removed has_transactions() virtual method. Now one should instead return
        HA_NO_TRANSACTIONS in table_flags() if the table handler DOES NOT support
        transactions.
      
      - The 'xxxx_create_handler()' function now has a MEM_ROOT_root argument
        that is to be used with 'new handler_name()' to allocate the handler
        in the right area.  The xxxx_create_handler() function is also
        responsible for any initialization of the object before returning.
      
        For example, one should change:
      
        static handler *myisam_create_handler(TABLE_SHARE *table)
        {
          return new ha_myisam(table);
        }
      
        ->
      
        static handler *myisam_create_handler(TABLE_SHARE *table, MEM_ROOT *mem_root)
        {
          return new (mem_root) ha_myisam(table);
        }
      
      - New optional virtual function: use_hidden_primary_key().
        This is called in case of an update/delete when
        (table_flags() and HA_PRIMARY_KEY_REQUIRED_FOR_DELETE) is defined
        but we don't have a primary key. This allows the handler to take precisions
        in remembering any hidden primary key to able to update/delete any
        found row. The default handler marks all columns to be read.
      
      - handler::table_flags() now returns a ulonglong (to allow for more flags).
      
      - New/changed table_flags()
        - HA_HAS_RECORDS	    Set if ::records() is supported
        - HA_NO_TRANSACTIONS	    Set if engine doesn't support transactions
        - HA_PRIMARY_KEY_REQUIRED_FOR_DELETE
                                  Set if we should mark all primary key columns for
      			    read when reading rows as part of a DELETE
      			    statement. If there is no primary key,
      			    all columns are marked for read.
        - HA_PARTIAL_COLUMN_READ  Set if engine will not read all columns in some
      			    cases (based on table->read_set)
       - HA_PRIMARY_KEY_ALLOW_RANDOM_ACCESS
         			    Renamed to HA_PRIMARY_KEY_REQUIRED_FOR_POSITION.
       - HA_DUPP_POS              Renamed to HA_DUPLICATE_POS
       - HA_REQUIRES_KEY_COLUMNS_FOR_DELETE
      			    Set this if we should mark ALL key columns for
      			    read when when reading rows as part of a DELETE
      			    statement. In case of an update we will mark
      			    all keys for read for which key part changed
      			    value.
        - HA_STATS_RECORDS_IS_EXACT
      			     Set this if stats.records is exact.
      			     (This saves us some extra records() calls
      			     when optimizing COUNT(*))
      			    
      
      - Removed table_flags()
        - HA_NOT_EXACT_COUNT     Now one should instead use HA_HAS_RECORDS if
      			   handler::records() gives an exact count() and
      			   HA_STATS_RECORDS_IS_EXACT if stats.records is exact.
        - HA_READ_RND_SAME	   Removed (no one supported this one)
      
      - Removed not needed functions ha_retrieve_all_cols() and ha_retrieve_all_pk()
      
      - Renamed handler::dupp_pos to handler::dup_pos
      
      - Removed not used variable handler::sortkey
      
      
      Upper level handler changes:
      
      - ha_reset() now does some overall checks and calls ::reset()
      - ha_table_flags() added. This is a cached version of table_flags(). The
        cache is updated on engine creation time and updated on open.
      
      
      MySQL level changes (not obvious from the above):
      
      - DBUG_ASSERT() added to check that column usage matches what is set
        in the column usage bit maps. (This found a LOT of bugs in current
        column marking code).
      
      - In 5.1 before, all used columns was marked in read_set and only updated
        columns was marked in write_set. Now we only mark columns for which we
        need a value in read_set.
      
      - Column bitmaps are created in open_binary_frm() and open_table_from_share().
        (Before this was in table.cc)
      
      - handler::table_flags() calls are replaced with handler::ha_table_flags()
      
      - For calling field->val() you must have the corresponding bit set in
        table->read_set. For calling field->store() you must have the
        corresponding bit set in table->write_set. (There are asserts in
        all store()/val() functions to catch wrong usage)
      
      - thd->set_query_id is renamed to thd->mark_used_columns and instead
        of setting this to an integer value, this has now the values:
        MARK_COLUMNS_NONE, MARK_COLUMNS_READ, MARK_COLUMNS_WRITE
        Changed also all variables named 'set_query_id' to mark_used_columns.
      
      - In filesort() we now inform the handler of exactly which columns are needed
        doing the sort and choosing the rows.
      
      - The TABLE_SHARE object has a 'all_set' column bitmap one can use
        when one needs a column bitmap with all columns set.
        (This is used for table->use_all_columns() and other places)
      
      - The TABLE object has 3 column bitmaps:
        - def_read_set     Default bitmap for columns to be read
        - def_write_set    Default bitmap for columns to be written
        - tmp_set          Can be used as a temporary bitmap when needed.
        The table object has also two pointer to bitmaps read_set and write_set
        that the handler should use to find out which columns are used in which way.
      
      - count() optimization now calls handler::records() instead of using
        handler->stats.records (if (table_flags() & HA_HAS_RECORDS) is true).
      
      - Added extra argument to Item::walk() to indicate if we should also
        traverse sub queries.
      
      - Added TABLE parameter to cp_buffer_from_ref()
      
      - Don't close tables created with CREATE ... SELECT but keep them in
        the table cache. (Faster usage of newly created tables).
      
      
      New interfaces:
      
      - table->clear_column_bitmaps() to initialize the bitmaps for tables
        at start of new statements.
      
      - table->column_bitmaps_set() to set up new column bitmaps and signal
        the handler about this.
      
      - table->column_bitmaps_set_no_signal() for some few cases where we need
        to setup new column bitmaps but don't signal the handler (as the handler
        has already been signaled about these before). Used for the momement
        only in opt_range.cc when doing ROR scans.
      
      - table->use_all_columns() to install a bitmap where all columns are marked
        as use in the read and the write set.
      
      - table->default_column_bitmaps() to install the normal read and write
        column bitmaps, but not signaling the handler about this.
        This is mainly used when creating TABLE instances.
      
      - table->mark_columns_needed_for_delete(),
        table->mark_columns_needed_for_delete() and
        table->mark_columns_needed_for_insert() to allow us to put additional
        columns in column usage maps if handler so requires.
        (The handler indicates what it neads in handler->table_flags())
      
      - table->prepare_for_position() to allow us to tell handler that it
        needs to read primary key parts to be able to store them in
        future table->position() calls.
        (This replaces the table->file->ha_retrieve_all_pk function)
      
      - table->mark_auto_increment_column() to tell handler are going to update
        columns part of any auto_increment key.
      
      - table->mark_columns_used_by_index() to mark all columns that is part of
        an index.  It will also send extra(HA_EXTRA_KEYREAD) to handler to allow
        it to quickly know that it only needs to read colums that are part
        of the key.  (The handler can also use the column map for detecting this,
        but simpler/faster handler can just monitor the extra() call).
      
      - table->mark_columns_used_by_index_no_reset() to in addition to other columns,
        also mark all columns that is used by the given key.
      
      - table->restore_column_maps_after_mark_index() to restore to default
        column maps after a call to table->mark_columns_used_by_index().
      
      - New item function register_field_in_read_map(), for marking used columns
        in table->read_map. Used by filesort() to mark all used columns
      
      - Maintain in TABLE->merge_keys set of all keys that are used in query.
        (Simplices some optimization loops)
      
      - Maintain Field->part_of_key_not_clustered which is like Field->part_of_key
        but the field in the clustered key is not assumed to be part of all index.
        (used in opt_range.cc for faster loops)
      
      -  dbug_tmp_use_all_columns(), dbug_tmp_restore_column_map()
         tmp_use_all_columns() and tmp_restore_column_map() functions to temporally
         mark all columns as usable.  The 'dbug_' version is primarily intended
         inside a handler when it wants to just call Field:store() & Field::val()
         functions, but don't need the column maps set for any other usage.
         (ie:: bitmap_is_set() is never called)
      
      - We can't use compare_records() to skip updates for handlers that returns
        a partial column set and the read_set doesn't cover all columns in the
        write set. The reason for this is that if we have a column marked only for
        write we can't in the MySQL level know if the value changed or not.
        The reason this worked before was that MySQL marked all to be written
        columns as also to be read. The new 'optimal' bitmaps exposed this 'hidden
        bug'.
      
      - open_table_from_share() does not anymore setup temporary MEM_ROOT
        object as a thread specific variable for the handler. Instead we
        send the to-be-used MEMROOT to get_new_handler().
        (Simpler, faster code)
      
      
      
      Bugs fixed:
      
      - Column marking was not done correctly in a lot of cases.
        (ALTER TABLE, when using triggers, auto_increment fields etc)
        (Could potentially result in wrong values inserted in table handlers
        relying on that the old column maps or field->set_query_id was correct)
        Especially when it comes to triggers, there may be cases where the
        old code would cause lost/wrong values for NDB and/or InnoDB tables.
      
      - Split thd->options flag OPTION_STATUS_NO_TRANS_UPDATE to two flags:
        OPTION_STATUS_NO_TRANS_UPDATE and OPTION_KEEP_LOG.
        This allowed me to remove some wrong warnings about:
        "Some non-transactional changed tables couldn't be rolled back"
      
      - Fixed handling of INSERT .. SELECT and CREATE ... SELECT that wrongly reset
        (thd->options & OPTION_STATUS_NO_TRANS_UPDATE) which caused us to loose
        some warnings about
        "Some non-transactional changed tables couldn't be rolled back")
      
      - Fixed use of uninitialized memory in ha_ndbcluster.cc::delete_table()
        which could cause delete_table to report random failures.
      
      - Fixed core dumps for some tests when running with --debug
      
      - Added missing FN_LIBCHAR in mysql_rm_tmp_tables()
        (This has probably caused us to not properly remove temporary files after
        crash)
      
      - slow_logs was not properly initialized, which could maybe cause
        extra/lost entries in slow log.
      
      - If we get an duplicate row on insert, change column map to read and
        write all columns while retrying the operation. This is required by
        the definition of REPLACE and also ensures that fields that are only
        part of UPDATE are properly handled.  This fixed a bug in NDB and
        REPLACE where REPLACE wrongly copied some column values from the replaced
        row.
      
      - For table handler that doesn't support NULL in keys, we would give an error
        when creating a primary key with NULL fields, even after the fields has been
        automaticly converted to NOT NULL.
      
      - Creating a primary key on a SPATIAL key, would fail if field was not
        declared as NOT NULL.
      
      
      Cleanups:
      
      - Removed not used condition argument to setup_tables
      
      - Removed not needed item function reset_query_id_processor().
      
      - Field->add_index is removed. Now this is instead maintained in
        (field->flags & FIELD_IN_ADD_INDEX)
      
      - Field->fieldnr is removed (use field->field_index instead)
      
      - New argument to filesort() to indicate that it should return a set of
        row pointers (not used columns). This allowed me to remove some references
        to sql_command in filesort and should also enable us to return column
        results in some cases where we couldn't before.
      
      - Changed column bitmap handling in opt_range.cc to be aligned with TABLE
        bitmap, which allowed me to use bitmap functions instead of looping over
        all fields to create some needed bitmaps. (Faster and smaller code)
      
      - Broke up found too long lines
      
      - Moved some variable declaration at start of function for better code
        readability.
      
      - Removed some not used arguments from functions.
        (setup_fields(), mysql_prepare_insert_check_table())
      
      - setup_fields() now takes an enum instead of an int for marking columns
         usage.
      
      - For internal temporary tables, use handler::write_row(),
        handler::delete_row() and handler::update_row() instead of
        handler::ha_xxxx() for faster execution.
      
      - Changed some constants to enum's and define's.
      
      - Using separate column read and write sets allows for easier checking
        of timestamp field was set by statement.
      
      - Remove calls to free_io_cache() as this is now done automaticly in ha_reset()
      
      - Don't build table->normalized_path as this is now identical to table->path
        (after bar's fixes to convert filenames)
      
      - Fixed some missed DBUG_PRINT(.."%lx") to use "0x%lx" to make it easier to
        do comparision with the 'convert-dbug-for-diff' tool.
      
      
      Things left to do in 5.1:
      
      - We wrongly log failed CREATE TABLE ... SELECT in some cases when using
        row based logging (as shown by testcase binlog_row_mix_innodb_myisam.result)
        Mats has promised to look into this.
      
      - Test that my fix for CREATE TABLE ... SELECT is indeed correct.
        (I added several test cases for this, but in this case it's better that
        someone else also tests this throughly).
        Lars has promosed to do this.
      74cc73d4
  30. 13 Apr, 2006 2 commits
  31. 07 Apr, 2006 1 commit
    • aelkin@mysql.com's avatar
      Bug#17284 erroneous temp table cleanup on slave. · d881fb36
      aelkin@mysql.com authored
        
           Idea of the fix is for master to send FD event with `created' as 0
           to reconnecting slave (upon slave_net_timeout, no master crash) to avoid destroying temp tables.
           In a case of a connect by slave to the master after its crash temp tables have been already
           cleaned up so that slave can not keep `orphan' temp tables.
      d881fb36
  32. 23 Mar, 2006 1 commit
  33. 25 Feb, 2006 1 commit
  34. 12 Jan, 2006 1 commit
  35. 03 Jan, 2006 1 commit
  36. 14 Nov, 2005 2 commits