MDEV-22463: Element_type &Bounds_checked_array<Item *>::operator[](size_t) [Element_type = Item *]: Assertion `n < m_size' failed.

Allocate space for fields inside the window function (arguments, PARTITION BY and ORDER BY clause)
in the ref pointer array. All fields inside the window function are part of the temporary
table that is required for the window function computation.

MDEV-22058: Assertion `!is_set() || (m_status == DA_OK_BULK && is_bulk_op())' failed in Diagnostics_area::set_ok_status

Error state is not stored in check_and_do_in_subquery_rewrites() when there is
illegal combination of optimizer switches. So all the functions eventually
return false. Thus the assetion failure.

The client can only find out if the server has disconnected when it tries to
read or send something. If the server gets disconnected before
send_client_reply_packet(), the client will try sending authentication
information but it will fail. But, if the client is fast enough to send
autentication information before disconnecting, it will notice that when
reading the ok packet. So the client can fail on read or on write.
It is unpredictable because, the process are unsynchronized and this
could happen in any order.

Reject queries that have aggregate functions with UNION as these
are not allowed by standard.

Pass the unsigned flag from the Item_sum to the window function

This reverts commit e0793d38.

In idiomatic C++, accessor functions should not discard qualifiers.

- service not using "--defaults-file" can have any name not just "MySQL"
- service with "--defaults-file", without datadir in them
use default datadir (install_root\data)

MemorySanitizer (clang -fsanitize=memory) requires that all code
be compiled with instrumentation enabled. The only exception is the
C runtime library. Failure to use instrumented libraries will cause
bogus messages about memory being uninitialized.

In WITH_MSAN builds, we must avoid calling getservbyname(),
because even though it is a standard library function, it is
not instrumented, not even in clang 10.

Note: Before MariaDB Server 10.5, ./mtr will typically fail
due to the old PCRE library, which was updated in MDEV-14024.

The following cmake options were tested on 10.5
in commit 94d0bb4d:

cmake \
-DCMAKE_C_FLAGS='-march=native -O2' \
-DCMAKE_CXX_FLAGS='-stdlib=libc++ -march=native -O2' \
-DWITH_EMBEDDED_SERVER=OFF -DWITH_UNIT_TESTS=OFF -DCMAKE_BUILD_TYPE=Debug \
-DWITH_INNODB_{BZIP2,LZ4,LZMA,LZO,SNAPPY}=OFF \
-DPLUGIN_{ARCHIVE,TOKUDB,MROONGA,OQGRAPH,ROCKSDB,CONNECT,SPIDER}=NO \
-DWITH_SAFEMALLOC=OFF \
-DWITH_{ZLIB,SSL,PCRE}=bundled \
-DHAVE_LIBAIO_H=0 \
-DWITH_MSAN=ON

MEM_MAKE_DEFINED(): An alias for VALGRIND_MAKE_MEM_DEFINED()
and __msan_unpoison().

MEM_GET_VBITS(), MEM_SET_VBITS(): Aliases for
VALGRIND_GET_VBITS(), VALGRIND_SET_VBITS(), __msan_copy_shadow().

InnoDB: Replace the UNIV_MEM_ macros with corresponding MEM_ macros.

ut_crc32_8_hw(), ut_crc32_64_low_hw(): Use the compiler built-in
functions instead of inline assembler when building WITH_MSAN.
This will require at least -msse4.2 when building for IA-32 or AMD64.
The inline assembler would not be instrumented, and would thus cause
bogus failures.

mariabackup tries to allocate a buffer of page_size*page_size/4 size.
for 64k page it means 1Gb, which doesn't work very well on 32-bit builders.

Skip the 64k page test on 32bit.

and remove it on error

Disable existing non-empty datadir for mysql_install_db.exe

The issue here is for a DEPENDENT subquery that has an aggregate function in the ORDER BY clause,
is wrapped inside an Item_aggregate_ref. For computation of ORDER BY we need to refer to the
temp table field corresponding to this item. But in the function make_sortorder, we were
explicitly casting Item_aggrgate_ref to Item_sum, which leads to us not getting the temp
table field corresponding to the item.

MDEV-23003 INFORMATION_SCHEMA.INNODB_TABLESPACES_ENCRYPTION requires SUPER instead PROCESS privilege

Fix a typo in a source code. Now real required privileges corresponds
to a ones mentions in documentation.

Documentation states that this table requires PROCESS privilege:
https://mariadb.com/kb/en/information-schema-innodb_tablespaces_encryption-table/

Window function is not allowed as arguments to window functions according to the standard.

This function is very common in a debug build. I can even see it in
profiler.

This patch reduces execution time of fil_validate() from
8948ns
8367ns
8650ns
8906ns
8448ns

to
260ns
232ns
403ns
275ns
169ns
in my environment.

The trick is a faster fil_space_t iteration. Hash table
is typically initialized with a size of 50,000. And looping through
it is slow. Slower, than iterating an exact amount of fil_space_t
which is typically less than ten.

Only debug builds are affected.

The issue here was that the left expr and right expr of the ANY subquery
had different character sets, so we were converting the left expr to utf8 character set.
So when this conversion was happening we were actually converting the item inside the cache,
it looked like <cache>(convert(t1.l1 using utf8)), which is incorrect.
To fix this problem we are going to store the reference of the left expr and convert that
to utf8 character set, it would look like convert(<cache>(`test`.`t1`.`l1`) using utf8)

Problem:
========
Relay_log_info::flush reports following MSAN issue.
==17820==WARNING: MemorySanitizer: use-of-uninitialized-value is reported
#5  0x00005584f0981441 in my_write (Filedes=22,
Buffer=0x72500003e818 "5\n./slave-relay-bin.000003\n21385\n
master-bin.000001\n21643\n0\n", '\245' <repeats 141 times>..., Count=118,
MyFlags=532) at /home/sujatha/bug_repo/test-10.5-msan/mysys/my_write.c:49

Analysis:
=========
In parallel replication at the end of each statement execution the worker execution
status is updated in 'relay-log.info' file. When two workers try to flush
the status at the same time, since the write to cache is not serialized both
workers write to the same address simultaneously and increment the
length twice. Because of this the length of buffer is more than actual data.
When flush code tries to read the buffer beyond valid data length MSAN
reports uninitialized values error.

Fix:
===
Serialize the relay log flush operation using "rli->data_lock".

Deadlock in DbugParse, on Linux.

In 10.1, DBUG recursive mutex was improperly implemented.
CODE_STATE::locked counter was never updated.

Copy the code around LockMutex/UnlockMutex from 10.2

Analysis:
========
When "Profiling" is enabled, server collects the resource usage of each
statement that gets executed in current session. Profiling doesn't support
nested statements. In order to ensure this behavior when profiling is enabled
for a statement, there should not be any other active query which is being
profiled. This active query information is stored in 'current' variable. When
a nested query arrives it finds 'current' being not NULL and server aborts.

When 'init_connect' and 'init_slave' system variables are set they contain a
set of statements to be executed. "execute_init_command" is the function call
which invokes "dispatch_command" for each statement provided in
'init_connect', 'init_slave' system variables. "execute_init_command" invokes
"start_new_query" and it passes the statement list to "dispatch_command". This
"dispatch_command" intern invokes "start_new_query" which leads to nesting of
queries. Hence '!current' assert is triggered.

Fix:
===
Remove profiling from "execute_init_command" as it will be done within
"dispatch_command" execution.

transactional engine

* --rr-dir to change store dir
* --rr-arg doesn't enable --rr (good for scripts)
* Bootstrap is saved to rr.boot

Fix for Galera rsync SST with the specific conditions listed in MDEV-21709
Exclude needs to be on receiving side too

changes.

This requires Galera commit 065e484144c5999709ae8fd19844da72bb785073

The galera.galera_parallel_autoinc_manytrx mtr test opens and runs test
scenario through 3 connections to node 1 and one connection to node 2.
In the test initialization phase, the test creates two tables 't1' and 'ten'
and then creates a stored procedure 'p1' to operate on these tables.
These 3 create DDL statements are issued through same connection to node 1.

In the next test phase, the mtr script uses send command to launch the call
for the p1 stored procedure through all 3 connections to node 1 and through
one connection to node 2. As the mtr send command is asynchronous,
this test phase is non blocking and fast operation.
Now, if the replication between nodes is slow, it may happen that the
initialization phase DDL statements have not been received or have not been
fully applied in node 2. Therefore there is no guarantee that the test tables
and the stored procedure have been created in node 2. Yet, the test is trying
to call p1 in node 2.

In the failure case error logs, there is error message
"MTR failed: query 'reap' failed: 1305: PROCEDURE test.p1 does not exist"

The reap command through connection to node 2, is the first place where test
execution may observe that test tables and/or stored procedure are not yet
created in node 2.

The fix in this commit adds a wait condition in connection to node 2, to wait
until the stored procedure is created before calling the stored procedure.
The wait is implemented by looking in information_schema.routines for the p1
stored procedure.

galera_ipv6_mariabackup MTR tests

MDEV-22125 : galera.galera_drop_multi MTR failed: InnoDB: MySQL is trying to drop database `fts`.`` though there are still open handles

MDEV-22140 galera.galera_drop_database MTR failed: InnoDB: MySQL is trying to drop database `fts`.`` though there are still open handles

Add wait conditions to wait that all operations are done in both
nodes.

MDEV-20928 : Galera test failure on galera.galera_var_innodb_disallow_writes: Result length mismatch

Add wait_conditions to force desired execution.