mysql-test/mysql-test-run.pl:
  Fix typo (missing $prefix arg to mtr_add_arg(--user=root))

into  ramayana.hindu.god:/home/tsmith/m/bk/build/50

into  ramayana.hindu.god:/home/tsmith/m/bk/build/50

into  pilot.mysql.com:/data/msvensson/mysql/mysql-5.0-build

ndb/src/kernel/blocks/dbtux/DbtuxScan.cpp:
  Move the increment to next line to avoid icc optimization problem that
  caused the "b" reference to be incremented

mysql-test/r/rpl_user.result:
  Result change.

mysql-test/t/rpl_user.test:
  Removing redundant reset master and deleting users from master
  and slave without using binary log.

into  mysql_cab_desk.:D:/source/c++/mysql-5.0-rpl-merge

This patch adds code to convert the path for LOAD DATA INFILE 
events to a Unix path which is needed for running mysql client
on Windows. 


client/mysqlbinlog.cc:
  BUG#32205 : Replaying statements from mysqlbinlog fails with a syntax error, replicates fine
  
  This patch adds code to convert the path for LOAD DATA INFILE 
  events to a Unix path which is needed for running mysql client
  on Windows. 
  
  The 'd:\x\y\z' path becomes 'd:xyz' when run in the client.

on the context.


mysql-test/r/mysqlbinlog.result:
  Result file change.
mysql-test/t/mysqlbinlog.test:
  Blanking out yet some numbers in file names.

mysql-test/r/mysqlbinlog.result:
  Result file change.
mysql-test/t/mysqlbinlog.test:
  Fixing test to not be dependent on the sequence numbers
  for file names generated by mysqlbinlog.

mysql-test/r/mix_innodb_myisam_binlog.result:
  Result change
mysql-test/t/binlog_start_comment.test:
  Adding --local-load to mysqlbinlog to prevent it from failing
  on Windows. Also adding --short-form.
mysql-test/t/mix_innodb_myisam_binlog.test:
  Extending LIKE pattern to use either \n or \r\n in order to work
  on Windows.

mysql-test/t/binlog_start_comment.test:
  Adding --local-infile=1 to enable local infile for mysql client.

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.0-rpl-merge


include/my_sys.h:
  Auto merged
sql/log.cc:
  Auto merged
sql/set_var.cc:
  Auto merged
sql/sql_acl.cc:
  Auto merged

mysql-test/include/have_local_infile.inc:
  BitKeeper file /data0/mkindahl/mysql-5.0-rpl-merge/mysql-test/include/have_local_infile.inc
mysql-test/r/have_local_infile.require:
  BitKeeper file /data0/mkindahl/mysql-5.0-rpl-merge/mysql-test/r/have_local_infile.require
mysql-test/t/binlog_start_comment.test:
  Test requires that local_infile is on, so added require for that.
mysql-test/t/rpl_sp.test:
  Adding missing sync_slave_with_master causing following tests to fail.

sql/sql_repl.cc:
  Adding cast to remove compile error on Windows platform.

into  ramayana.hindu.god:/home/tsmith/m/bk/build/50

Fix by calling ha_release_temporary_latches() before ::filesort().


sql/filesort.cc:
  Call ha_release_temporary_latches() before performing
  a (possibly long) ::filesort().

Nothing was in the command-line dictionary, because of the wrong 
order of instructions when populating it.

This is a smaller, less optimistic patch that both fixes a bug and
refreshes the list of keywords that the command-line library (e.g., 
readline) can use to expand typed commands.  Now, read from the 
command list /after/ we free the list, not before.

The best way is to read the keywords from the lexer code, but that
doesn't work everywhere yet.  Grr.


client/mysql.cc:
  Order the instructions for clearing and populating the keyword list,
  to be in that order.
  
  Additionally, add more keywords.

mysql-test/t/rpl_transaction.test:
  Test only works for debug build.

mysql-test/r/bdb_notembedded.result:
  Result change.
mysql-test/r/rpl_loaddata_map.result:
  Result change.
mysql-test/t/rpl_loaddata_map.test:
  Blanking out file id as well.

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.0-rpl-merge


include/my_sys.h:
  Auto merged
mysql-test/r/blackhole.result:
  Auto merged
mysql-test/r/case.result:
  Auto merged
mysql-test/r/mysqlbinlog2.result:
  Auto merged
mysql-test/t/blackhole.test:
  Auto merged
mysql-test/t/case.test:
  Auto merged
sql/set_var.cc:
  Auto merged
sql/sql_acl.cc:
  Auto merged
sql/sql_parse.cc:
  Auto merged

into  mail.hezx.com:/media/sda3/work/mysql/bkwork/bug26489_corruption_in_relay_log/5.0

into  zippy.cornsilk.net:/home/cmiller/work/mysql/mysql-5.0-build


client/mysql.cc:
  Auto merged

into  zippy.cornsilk.net:/home/cmiller/work/mysql/mysql-4.1-build

mysql-test/r/rpl_grant.result:
  update result

Here is the scenario that causes the failure.(by Mats)

1. The to-be corrupt log event (let's call it X), is split into two
   packets B and C on the network level (net_write_buff()). The parts
   are X = (x',x''). The part x' ends up in packet B and part x''
   ends up in packet C. Prior to the corrupt event X, the event Y has
   been written successfully, but has been split into two packets as
   well, which we call (y',y'').
2. The master sends packet A = (y'',x') to the slave, increases the
   packet sequence number, the slave receives the packet, but fails
   to reply before the master gets a timeout.
3. Since the master got a timeout, it reports failure, and aborts
   sending the binary log by exiting mysql_binlog_send(). However, it
   leaves the buffer intact, still holding y'' (but not x', since the
   write_pos is not increased).
4. After exiting mysql_binlog_send(), the master does a
   disconnection of the client thread, which involves sending an
   error message e to the client (i.e., the slave).
5. In this case, net_write_buff() is used again, but this time the
   old contents of the packet is used so that the new packet is
   D = (y'',e). Note that this will use a new packet sequence number,
   since the packet number was increased in step 2.
6. The slave receives the tail y'' of the Y log event, concatenates
   this with x' (which it already received), and writes the event
   (x',y'') it to the relay log since it hasn't noticed anything is
   amiss.
7. It then tries to read more bytes, which is either e (if the length
   given for X just happened to match the length given for Y, or just
   plain garbage because the slave is out of sync with what is
   actually sent.
8. After a while, the SQL thread tries to execute the event (x',y''),
   which is very likely to be just nonsense.

The problem can be fixed by not resetting net->error after the call of 
mysql_binlog_send, so the error message will not be sent and the connection
will be closed.


sql/sql_parse.cc:
  Do not reset net->error, if net->error == 2, we should not try to use the connection again

into  trift2.:/MySQL/M50/push-5.0

into  trift2.:/MySQL/M50/push-5.0


configure.in:
  Auto merged
extra/resolveip.c:
  Auto merged

into  trift2.:/MySQL/M41/push-4.1

and so that it works correctly on Windows.


mysql-test/r/mysqlcheck.result:
  Flush tables before monkeying around with underlying MyISAM data files
mysql-test/t/mysqlcheck.test:
  Fix the test case for bug #25347 so that it actually does test the behavior.
  Also, this makes it work on Windows by ensuring that mysqld doesn't hold the
  underlying MyISAM files open while we try to corrupt them on disk.
  
  Flush tables before monkeying around with underlying MyISAM data files;
  --use-frm, so that mysqlcheck will succeed.

mysql-test/t/mysqlcheck.test:
  Use --remove_file and --write_file instead of --exec rm and --exec touch.

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50


sql/sql_select.cc:
  Auto merged

	running queries

Bug#33976: buffer overflow of variable time_buff in function com_go()

An internal buffer was too short.  Overextending could smash the 
stack on some architectures and cause SEGVs.  This is not a problem
that could be exploited to run arbitrary code.

To fix, I expanded one buffer to cover all the size that could be
written to (we know the abolute max).


client/mysql.cc:
  Bump up the max size of the time-elapsed buffer displayed at the end
  of queries.

The problem is when create/rename/drop users, the statement was logged regardless of error, even if no data has been changed, the statement was logged.

After this patch, create/rename/drop users don't write the binlog if the statement makes no changes, if the statement does make any changes, log the statement with possible error code.

This patch is based on the patch for BUG#29749, which is not pushed


sql/sql_acl.cc:
  when create/rename/drop users, don't write the binlog if the statement make no changes
mysql-test/r/rpl_user.result:
  New BitKeeper file ``mysql-test/r/rpl_user.result''
mysql-test/t/rpl_user.test:
  New BitKeeper file ``mysql-test/t/rpl_user.test''

into  quad.:/mnt/raid/alik/MySQL/devel/5.0-rt-merged-5.0

BitKeeper/triggers/triggers-lib.pl:
  Fix bug in innodb_send_changes_mail() that always displayed
  details for the most recent changeset (-r+) instead of the
  $cset function argument.

into  ramayana.hindu.god:/home/tsmith/m/bk/build/50

Fixes:

Bug #32083: server crashes on show status when InnoDB is not initialized
  innodb_export_status(): Check that InnoDB has been initialized
  before invoking srv_export_innodb_status().  (Bug #32083)
  This bug does not exist in MySQL/InnoDB 5.1.


sql/ha_innodb.cc:
  Applied innodb-5.0-ss2223 snapshot
  
  Revision r2223:
  branches/5.0: innodb_export_status(): Check that InnoDB has been initialized
  before invoking srv_export_innodb_status().  (Bug #32083)
  
  This bug does not exist in MySQL/InnoDB 5.1.