Temporary tables may set join->group to 0 even though there is 
grouping. Also need to test if sum_func_count>0 when JOIN::exec() 
decides whether to present results in a grouped manner.

            columns without where/group
                     
Simple SELECT with implicit grouping used to return many rows if
the query was ordered by the aggregated column in the SELECT
list. This was incorrect because queries with implicit grouping
should only return a single record.
                              
The problem was that when JOIN:exec() decided if execution needed
to handle grouping, it was assumed that sum_func_count==0 meant
that there were no aggregate functions in the query. This
assumption was not correct in JOIN::exec() because the aggregate
functions might have been optimized away during JOIN::optimize().
                  
The reason why queries without ordering behaved correctly was
that sum_func_count is only recalculated if the optimizer chooses
to use temporary tables (which it does in the ordered case).
Hence, non-ordered queries were correctly treated as grouped.
                  
The fix for this bug was to remove the assumption that
sum_func_count==0 means that there is no need for grouping. This
was done by introducing variable "bool implicit_grouping" in the
JOIN object.

      
The BINLOG statement was sharing too much code with the slave SQL thread, introduced with
the patch for Bug#32407. This caused statements to be logged with the wrong server_id, the
id stored inside the events of the BINLOG statement rather than the id of the running 
server.
      
Fix by rearranging code a bit so that only relevant parts of the code are executed by
the BINLOG statement, and the server_id of the server executing the statements will 
not be overrided by the server_id stored in the 'format description BINLOG statement'.

 
The problem was in incorrect handling of predicates involving 
NULL as a constant value by the range optimizer.  
 
For example, when creating a SEL_ARG node from a condition of 
the form "field < const" (which would normally result in the 
"NULL < field < const" SEL_ARG),  the special case when "const" 
is NULL was not taken into account, so "NULL < field < NULL" 
was produced for the "field < NULL" condition. 
 
As a result, SEL_ARG structures of this form could not be 
further optimized which in turn could lead to incorrectly 
constructed SEL_ARG trees. In particular, code assuming SEL_ARG 
structures to always form a sequence of ordered disjoint 
intervals could enter an infinite loop under some 
circumstances. 
 
Fixed by changing get_mm_leaf() so that for any sargable 
predicate except "<=>" involving NULL as a constant, "empty" 
SEL_ARG is returned, since such a predicate is always false. 

- Fix a typo and adjust the CMakeLists.txt
- Remove the README file as it doesn't exist in 
  Innodb plugin 1.0.5

The bug has been closed.

Sync the storage/innodb_plugin/mysql-test directory
with Innodb_plugin-1.0.5/mysql-test directory

Update the README file

1. Undo r6031 btr/btr0btr.c changes

2. apply skipped Plug.in changes and missed revisions

Detailed revision comments:

r5865 | vasil | 2009-09-12 02:26:03 -0500 (Sat, 12 Sep 2009) | 10 lines
branches/zip:

Simplify the compile time checks by splittig them into 5 independent checks:

* Whether GCC atomics are available
* Whether pthread_t can be used by GCC atomics
* Whether Solaris libc atomics are available
* Whether pthread_t can be used by Solaris libs atomics
* Checking the size of pthread_t

r5869 | vasil | 2009-09-12 03:33:11 -0500 (Sat, 12 Sep 2009) | 15 lines
branches/zip:

Include ut0auxconf.h only if none of the macros it would define is defined.
The check when to include this header was outdated from the time when there
was only one macro involved.

Move the atomics checks that are in univ.i outside of
#if windows ... #else ... #endif
This simplifies the code and removes some duplicates like defining
HAVE_ATOMIC_BUILTINS if HAVE_WINDOWS_ATOMICS is defined in both branches.

Do not define the same macro HAVE_ATOMIC_PTHREAD_T for different events.
Instead define HAVE_IB_ATOMIC_PTHREAD_T_GCC and
HAVE_IB_ATOMIC_PTHREAD_T_SOLARIS.

r5871 | vasil | 2009-09-12 04:25:44 -0500 (Sat, 12 Sep 2009) | 6 lines
branches/zip:

Rename HAVE_SOLARIS_ATOMICS to HAVE_IB_SOLARIS_ATOMICS and 
IB_HAVE_PAUSE_INSTRUCTION to HAVE_IB_PAUSE_INSTRUCTION so they
all follow the same HAVE_IB_* convention.

r5888 | vasil | 2009-09-14 03:38:45 -0500 (Mon, 14 Sep 2009) | 40 lines
branches/zip:

Back-merge c5880 and c5881 from branches/embedded-1.0:

  ------------------------------------------------------------------------
  r5880 | vasil | 2009-09-12 17:28:44 +0300 (Sat, 12 Sep 2009) | 18 lines
  Changed paths:
     M /branches/embedded-1.0/configure.in
     M /branches/embedded-1.0/include/os0sync.h
     M /branches/embedded-1.0/srv/srv0start.c
  
  branches/embedded-1.0:
  
  Clean up and simplify the code that surrounds the atomic ops:
  
  * Simplify the code that prints what atomics are used:
  Instead of repeating the same conditions on which each atomics are used
  use just one printf that prints a variable defined by the code which
  chooses what atomics to use.
  
  * In os0sync.h pick up each atomic variant only if it has been selected
  by autoconf (based on IB_ATOMIC_MODE_* macros). Define the startup message
  to be printed.
  
  * In configure.in: check what user has chosen and if he has chosen
  something that is not available, emit an error. If nothing has been chosen
  explicitly by the user, auto select an option according to the described
  logic in configure.in.
  
  ------------------------------------------------------------------------
  r5881 | vasil | 2009-09-12 20:08:27 +0300 (Sat, 12 Sep 2009) | 4 lines
  Changed paths:
     M /branches/embedded-1.0/configure.in
  
  branches/embedded-1.0:
  
  Fix syntax error in test program.
  
  ------------------------------------------------------------------------

r5889 | vasil | 2009-09-14 04:17:18 -0500 (Mon, 14 Sep 2009) | 5 lines
branches/zip:

Add missing return statement in the test program that could have
caused a warning.

r5893 | inaam | 2009-09-14 10:20:48 -0500 (Mon, 14 Sep 2009) | 10 lines
branches/zip  rb://159

In case of pages that are not made young the counter is incremented
only when the page in question is 'old'. In case of pages that are
made young the counter is incremented in case of all pages. For apple
to apple comparison this patch changes the 'young-making' counter to
consider only 'old' blocks.

Approved by: Marko

r5537 | vasil | 2009-07-21 04:31:26 -0500 (Tue, 21 Jul 2009) | 5 lines
branches/zip:

Fixups in ChangeLog: sort filenames alphabetically and wrap to 78 chars per
line.
r5870 | vasil | 2009-09-12 04:13:44 -0500 (Sat, 12 Sep 2009) | 7 lines
branches/zip:

Define HAVE_ATOMIC_BUILTINS and INNODB_RW_LOCKS_USE_ATOMICS in os0sync.h
instead of in univ.i. The code expects os_*() macros to be present if
HAVE_ATOMIC_BUILTINS and INNODB_RW_LOCKS_USE_ATOMICS are defined. So define
them next to defining the os_*() macros.

r5696 | vasil | 2009-08-26 08:15:59 -0500 (Wed, 26 Aug 2009) | 14 lines
branches/zip:

Merge a change from MySQL:

 http://lists.mysql.com/commits/80832

 2968 Jonathan Perkin	2009-08-14
      Build fixes for Windows, AIX, HP/UX and Sun Studio11, from Timothy Smith.
      modified:
        CMakeLists.txt
        cmd-line-utils/readline/util.c
        storage/innodb_plugin/handler/i_s.cc
        storage/innodb_plugin/include/univ.i

r5897 | marko | 2009-09-15 03:29:00 -0500 (Tue, 15 Sep 2009) | 8 lines
branches/zip: Avoid bogus messages about latching order violations when
UNIV_SYNC_DEBUG is defined.

sync_thread_levels_g(): Add the parameter "warn".  Do not print
anything unless it is set.

sync_thread_add_level(): Pass warn=TRUE to sync_thread_levels_g()
when the check is within an assertion; FALSE if it is not.

r5899 | marko | 2009-09-15 06:26:01 -0500 (Tue, 15 Sep 2009) | 4 lines
branches/zip: ut0ut.h: Do not #include "os0sync.h" #ifdef UNIV_HOTBACKUP.
Since r5872, the InnoDB Hot Backup build was broken.
Fix it by not defining any thread synchronization primitives in ut0ut.h.
InnoDB Hot Backup is a single-threaded program.

changing year in copyright header to 2009.

Fixing copyright header in test collation file.

In MySQL when the mapping for space is changed to something other than
0x20 by defining a different collation, then space is not ignored when
comparing two strings.

This was happening because the function that performs the comparison
of two strings while ignoring ending spaces, was comparing the collation
value of a space with the ascii value of the ' ' character. This should
be changed to do comparison between the collated values.

  A build "--without-server" fails if using "--with-ssl" (YaSSL)

The problem was the lack of directory "extra" in a build
which did not include the server.

            low myisam_sort_buffer_size

Repair by sort (default) or parallel repair of a MyISAM table
(doesn't matter partitioned or not) as well as bulk inserts
and enable indexes some times didn't failover to repair with
key cache.

The problem was that after unsuccessful attempt, data file was
closed. Whereas repair with key cache requires open data file.
Fixed by reopening data file.

Also fixed a valgrind warning, which may appear during repair
by sort or parallel repair with certain myisam_sort_buffer_size
number of rows and length of an index entry (very dependent).

From r5995 to r6043

Detailed revision comments:

r5995 | marko | 2009-09-28 03:52:25 -0500 (Mon, 28 Sep 2009) | 17 lines
branches/zip: Do not write to PAGE_INDEX_ID after page creation,
not even when restoring an uncompressed page after a compression failure.

btr_page_reorganize_low(): On compression failure, do not restore
those page header fields that should not be affected by the
reorganization.  Instead, compare the fields.

page_zip_decompress(): Add the parameter ibool all, for copying all
page header fields.  Pass the parameter all=TRUE on block read
completion, redo log application, and page_zip_validate(); pass
all=FALSE in all other cases.

page_zip_reorganize(): Do not restore the uncompressed page on
failure.  It will be restored (to pre-modification state) by the
caller anyway.

rb://167, Issue #346
r5996 | marko | 2009-09-28 07:46:02 -0500 (Mon, 28 Sep 2009) | 4 lines
branches/zip: Address Issue #350 in comments.

lock_rec_queue_validate(), lock_rec_queue_validate(): Note that
this debug code may violate the latching order and cause deadlocks.
r5997 | marko | 2009-09-28 08:03:58 -0500 (Mon, 28 Sep 2009) | 12 lines
branches/zip: Remove an assertion failure when the InnoDB data dictionary
is inconsistent with the MySQL .frm file.

ha_innobase::index_read(): When the index cannot be found,
return an error.

ha_innobase::change_active_index(): When prebuilt->index == NULL,
set also prebuilt->index_usable = FALSE.  This is not needed for
correctness, because prebuilt->index_usable is only checked by
row_search_for_mysql(), which requires prebuilt->index != NULL.

This addresses Issue #349.  Approved by Heikki Tuuri over IM.
r6005 | vasil | 2009-09-29 03:09:52 -0500 (Tue, 29 Sep 2009) | 4 lines
branches/zip:

ChangeLog: wrap around 78th column, not earlier.

r6006 | vasil | 2009-09-29 05:15:25 -0500 (Tue, 29 Sep 2009) | 4 lines
branches/zip:

Add ChangeLog entry for the release of 1.0.4.

r6007 | vasil | 2009-09-29 08:19:59 -0500 (Tue, 29 Sep 2009) | 6 lines
branches/zip:

Fix the year, should be 2009.

Pointed by:	Calvin

r6026 | marko | 2009-09-30 02:18:24 -0500 (Wed, 30 Sep 2009) | 1 line
branches/zip: Add some debug assertions for checking FSEG_MAGIC_N.
r6028 | marko | 2009-09-30 08:55:23 -0500 (Wed, 30 Sep 2009) | 3 lines
branches/zip: recv_no_log_write: New debug flag for tracking down
Mantis Issue #347.  No modifications should be made to the database
while recv_apply_hashed_log_recs() is about to complete.
r6029 | calvin | 2009-09-30 15:32:02 -0500 (Wed, 30 Sep 2009) | 4 lines
branches/zip: non-functional changes

Fix typo.

r6031 | marko | 2009-10-01 06:24:33 -0500 (Thu, 01 Oct 2009) | 49 lines
branches/zip: Clean up after a crash during DROP INDEX.
When InnoDB crashes while dropping an index, ensure that
the index will be completely dropped during crash recovery.

row_merge_drop_index(): Before dropping an index, rename the index to
start with TEMP_INDEX_PREFIX_STR and commit the change, so that
row_merge_drop_temp_indexes() will drop the index after crash
recovery if the server crashes while dropping the index.

fseg_inode_try_get(): New function, forked from fseg_inode_get().
Return NULL if the file segment index node is free.

fseg_inode_get(): Assert that the file segment index node is not free.

fseg_free_step(): If the file segment index node is already free,
print a diagnostic message and return TRUE.

fsp_free_seg_inode(): Write a nonzero number to FSEG_MAGIC_N, so that
allocated-and-freed file segment index nodes can be better
distinguished from uninitialized ones.

This is rb://174, addressing Issue #348.

Tested by restarting mysqld upon the completion of the added
log_write_up_to() invocation below, during DROP INDEX.  The index was
dropped after crash recovery, and re-issuing the DROP INDEX did not
crash the server.

Index: btr/btr0btr.c
===================================================================
--- btr/btr0btr.c	(revision 6026)
+++ btr/btr0btr.c	(working copy)
@@ -42,6 +42,7 @@ Created 6/2/1994 Heikki Tuuri
 #include "ibuf0ibuf.h"
 #include "trx0trx.h"
+#include "log0log.h"
 
 /*
 Latching strategy of the InnoDB B-tree
 --------------------------------------
@@ -873,6 +874,8 @@ leaf_loop:
 
 		goto leaf_loop;
 	}
+
+	log_write_up_to(mtr.end_lsn, LOG_WAIT_ALL_GROUPS, TRUE);
 top_loop:
 	mtr_start(&mtr);
 
r6033 | calvin | 2009-10-01 15:19:46 -0500 (Thu, 01 Oct 2009) | 4 lines
branches/zip: fix a typo in error message

Reported as bug#47763.

r6043 | inaam | 2009-10-05 09:45:35 -0500 (Mon, 05 Oct 2009) | 12 lines
branches/zip  rb://176

Do not invalidate buffer pool while an LRU batch is active. Added
code to buf_pool_invalidate() to wait for the running batches to finish.

This patch also resets the state of buf_pool struct at invalidation. This
addresses the concern where buf_pool->freed_page_clock becomes non-zero
because we read in a system tablespace page for file format info at
startup.

Approved by: Marko

Disable the test when it will not hit the open_files_limit

From revision r5945 to r5994
r5950 - already applied and so skipped

Detailed revision comments:

r5945 | calvin | 2009-09-21 09:53:22 -0500 (Mon, 21 Sep 2009) | 4 lines
branches/zip: fix a type in r5935

Should be innodb_open_files, spotted by Michael.

r5951 | calvin | 2009-09-22 10:17:01 -0500 (Tue, 22 Sep 2009) | 4 lines
branches/zip: adjust CMake file to work with old versions of MySQL

Tested with MySQL 5.1.38 and 5.1.30.

r5956 | calvin | 2009-09-22 18:30:10 -0500 (Tue, 22 Sep 2009) | 4 lines
branches/zip: remove handler0vars.h from Makefile.am

Left over from r5950.

r5971 | marko | 2009-09-23 08:03:51 -0500 (Wed, 23 Sep 2009) | 2 lines
branches/zip: os_file_pwrite(): Make the code compile in InnoDB Hot Backup
when the pwrite system call is not available.
r5972 | marko | 2009-09-23 14:44:52 -0500 (Wed, 23 Sep 2009) | 5 lines
branches/zip: fil_node_open_file(): In InnoDB Hot Backup,
determine the page size of single-file tablespaces before computing
the file node size.  Otherwise, the space->size of compressed tablespaces
would be computed with UNIV_PAGE_SIZE instead of key_block_size.
This should fix Issue #313.
r5973 | marko | 2009-09-23 14:53:21 -0500 (Wed, 23 Sep 2009) | 2 lines
branches/zip: recv_add_to_hash_table():
Simplify obfuscated pointer arithmetics.
r5978 | marko | 2009-09-24 02:47:56 -0500 (Thu, 24 Sep 2009) | 1 line
branches/zip: Fix warnings and errors when UNIV_HOTBACKUP is defined.
r5979 | marko | 2009-09-24 05:16:10 -0500 (Thu, 24 Sep 2009) | 4 lines
branches/zip: ha_innodb.cc: Define MYSQL_PLUGIN_IMPORT when necessary.
This preprocessor symbol has been recently introduced in MySQL 5.1.
The InnoDB Plugin should remain source compatible with MySQL 5.1.24
and later.
r5988 | calvin | 2009-09-25 14:14:43 -0500 (Fri, 25 Sep 2009) | 8 lines
branches/zip: fix bug#47055 unconditional exit(1) on ERROR_WORKING_SET_QUOTA
1453 (0x5AD) for InnoDB backend

When error ERROR_WORKING_SET_QUOTA or ERROR_NO_SYSTEM_RESOURCES
occurs, yields for 100ms and retries the operation.

Approved by: Heikki (on IM)

r5992 | vasil | 2009-09-28 02:10:29 -0500 (Mon, 28 Sep 2009) | 4 lines
branches/zip:

Add ChangeLog entry for c5988.

r5994 | marko | 2009-09-28 03:33:59 -0500 (Mon, 28 Sep 2009) | 17 lines
branches/zip: Try to prevent the reuse of tablespace identifiers after
InnoDB has crashed during table creation.  Also, refuse to start if
files with duplicate tablespace identifiers are encountered.

fil_node_create(): Update fil_system->max_assigned_id.  This should
prevent the reuse of a space->id when InnoDB does a full crash
recovery and invokes fil_load_single_table_tablespaces().  Normally,
fil_system->max_assigned_id is initialized from
SELECT MAX(ID) FROM SYS_TABLES.

fil_open_single_table_tablespace(): Return FALSE when
fil_space_create() fails.

fil_load_single_table_tablespace(): Exit if fil_space_create() fails
and innodb_force_recovery=0.

rb://173 approved by Heikki Tuuri.  This addresses Issue #335.