into  moksha.local:/Users/davi/mysql/push/bugs/25164-5.1

The problem from a user's perspective: user creates table A, and then tries
to CREATE TABLE a SELECT from A - and this causes a deadlock error, a hang,
or fails with a debug assert, but only if the storage engine is InnoDB.

The origin of the problem: InnoDB uses case-insensitive collation
(system_charset_info) when looking up the internal table share, thus returning
the same share for 'a' and 'A'.

Cause of the user-visible behavior: since the same share is returned to SQL
locking subsystem, it assumes that the same table is first locked (within the
same session) for WRITE, and then for READ, and returns a deadlock error.
However, the code is wrong in not properly cleaning up upon an error, leaving
external locks in place, which leads to assertion failures and hangs.

Fix that has been implemented: the SQL layer should properly propagate the
deadlock error, cleaning up and freeing all resources.

Further work towards a more complete solution: InnoDB should not use case
insensitive collation for table share hash if table names on disk honor the case.

into  weblab.(none):/home/marcsql/TREE/mysql-5.1-cleanup

Whitespace cleanup

into  adventure.(none):/home/thek/Development/cpp/mysql-5.1-runtime

Test case contains possible race conditions. This patch fixes these race
conditions and also adjust the test to execute according to its documentation.

into  weblab.(none):/home/marcsql/TREE/mysql-5.1-cleanup

since this flag was explicitly removed in pushbuild for GCOV builds.

 BUILD_CMD => ['sh', '-c', 'perl -i.bak -pe "s/ \\\\\$static_link//" ' .
              'BUILD/compile-pentium-gcov; BUILD/compile-pentium-gcov'],

Moving $static_link to SETUP.sh broke this, and is now fixed.

Should this flag be needed on some platforms,
the proper location is compile-<platform>-gcov

Tested the amd64 and pentium64 build fine without it, and can run NDB tests.

Before this patch, the parser would execute:
- Select->expr_list.push_front()
- Select->expr_list.pop()
when parsing expressions lists, in the following rules:
- udf_expr_list
- expr_list
- ident_list

This is unnecessary, and introduces overhead due to the memory allocations
performed with Select->expr_list

With this patch, this code has been removed.
The list being parsed is maintained in the parser stack instead.

Also, 'udf_expr_list' has been renamed 'opt_udf_expr_list', since this
production can be empty.

into  weblab.(none):/home/marcsql/TREE/mysql-5.1-rt50-merge

into  weblab.(none):/home/marcsql/TREE/mysql-5.0-30237

into  weblab.(none):/home/marcsql/TREE/mysql-5.0-23062

into  weblab.(none):/home/marcsql/TREE/mysql-5.0-30237

This is a performance bug, related to the parsing or 'OR' and 'AND' boolean
expressions.

Let N be the number of expressions involved in a OR (respectively AND).

When N=1

For example, "select 1" involve only 1 term: there is no OR operator.

In 4.0 and 4.1, parsing expressions not involving OR had no overhead.
In 5.0, parsing adds some overhead, with Select->expr_list.

With this patch, the overhead introduced in 5.0 has been removed,
so that performances for N=1 should be identical to the 4.0 performances,
which are optimal (there is no code executed at all)

The overhead in 5.0 was in fact affecting significantly some operations.
For example, loading 1 Million rows into a table with INSERTs,
for a table that has 100 columns, leads to parsing 100 Millions of
expressions, which means that the overhead related to Select->expr_list
is executed 100 Million times ...

Considering that N=1 is by far the most probable expression,
this case should be optimal.

When N=2

For example, "select a OR b" involves 2 terms in the OR operator.

In 4.0 and 4.1, parsing expressions involving 2 terms created 1 Item_cond_or
node, which is the expected result.
In 5.0, parsing these expression also produced 1 node, but with some extra
overhead related to Select->expr_list : creating 1 list in Select->expr_list
and another in Item_cond::list is inefficient.

With this patch, the overhead introduced in 5.0 has been removed
so that performances for N=2 should be identical to the 4.0 performances.
Note that the memory allocation uses the new (thd->mem_root) syntax
directly.
The cost of "is_cond_or" is estimated to be neglectable: the real problem
of the performance degradation comes from unneeded memory allocations.

When N>=3

For example, "select a OR b OR c ...", which involves 3 or more terms.

In 4.0 and 4.1, the parser had no significant cost overhead, but produced
an Item tree which is difficult to evaluate / optimize during runtime.
In 5.0, the parser produces a better Item tree, using the Item_cond
constructor that accepts a list of children directly, but at an extra cost
related to Select->expr_list.

With this patch, the code is implemented to take the best of the two
implementations:
- there is no overhead with Select->expr_list
- the Item tree generated is optimized and flattened.

This is achieved by adding children nodes into the Item tree directly,
with Item_cond::add(), which avoids the need for temporary lists and memory
allocation

Note that this patch also provide an extra optimization, that the previous
code in 5.0 did not provide: expressions are flattened in the Item tree,
based on what the expression already parsed is, and not based on the order
in which rules are reduced.

For example : "(a OR b) OR c", "a OR (b OR c)" would both be represented
with 2 Item_cond_or nodes before this patch, and with 1 node only with this
patch. The logic used is based on the mathematical properties of the OR
operator (it's associative), and produces a simpler tree.

into  adventure.(none):/home/thek/Development/cpp/mysql-5.0-runtime

into  adventure.(none):/home/thek/Development/cpp/mysql-5.1-runtime

into  adventure.(none):/home/thek/Development/cpp/mysql-5.1-runtime

into  adventure.(none):/home/thek/Development/cpp/bug30269/my51-bug30269

Although the query cache doesn't support retrieval of statements containing
column level access control, it was still possible to cache such statements
thus wasting memory.
  
This patch extends the access control check on the target tables to avoid
caching a statement with column level restrictions. 

Views are excepted and can be cached but only retrieved by super user account.

into  weblab.(none):/home/marcsql/TREE/mysql-5.1-rt50-merge

into  weblab.(none):/home/marcsql/TREE/mysql-5.1-rt-merge

into  weblab.(none):/home/marcsql/TREE/mysql-5.0-rt-merge

Finish premature patch which was accidentally pushed; remove debugging
info and correct the test.

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/51

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/51

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50

When using --log --log-output=table, we increment Table_locks_immediate
with every query.  The wait_condition.inc runs a query a variable number
of times, depending on server load, etc.  This is a problem, when the
test is checking the Table_locks_immediate value.

Fix is to adjust the Table_locks_immediate value based on how many times
the wait_condition query was executed.

into  moksha.local:/Users/davi/mysql/push/mysql-5.1-runtime

This is a follow up for the patch for Bug#26162 "Trigger DML ignores low_priority_updates setting", where the stored procedure ignores the session setting of low_priority_updates.

into  adventure.(none):/home/thek/Development/cpp/mysql-5.1-runtime

into  adventure.(none):/home/thek/Development/cpp/mysql-5.0-runtime

into  adventure.(none):/home/thek/Development/cpp/mysql-5.1-runtime

into  adventure.(none):/home/thek/Development/cpp/bug30269/my51-bug30269

Although the query cache doesn't support retrieval of statements containing
column level access control, it was still possible to cache such statements
thus wasting memory.

This patch extends the access control check on the target tables to avoid
caching a statement with column level restrictions. 

mysql_ha_open calls mysql_ha_close on the error path (unsupported) to close the (opened) table before inserting it into the tables hash list handler_tables_hash) but mysql_ha_close only closes tables which are on the hash list, causing the table to be left open and locked.

This change moves the table close logic into a separate function that is always called on the error path of mysql_ha_open or on a normal handler close (mysql_ha_close).

into  kindahl-laptop.dnsalias.net:/home/bk/fix-mysql-5.1-rpl