rtr_ins_enlarge_mbr(): Relax the assertion that was added in
commit f27e9c89
to cover also table-rebuilding DDL. We only need
btr_cur->rtr_info->thr for acquiring R-tree locks,
and the thread that is executing a DDL operation has exclusive
access to the being-built index or the copy of the being-rebuilt table.

Set the lock wait timeout to 1 beforehand, and reset it afterwards, to
avoid lock conflict caused by opening the same table twice in case of
self-reference.

- assign spider->share early when !new_share
- remove locking before spider_share_init_{sts,crd}

Extracted out common subroutines, gave more meaningful names etc,
added comments etc.

Also:
- Documented active servers load balancing reads, and other fields in
  SPIDER_SHARE etc.
- Removed commented out code
- Documented and refactored self-reference check
- Removed some unnecessary functions
- Renamed unhelpful roop_count
- Refactored spider_get_{sts,crd}, where we turn get_type into an enum
- Cleaned up spider_mbase_handler::show_table_status() and
  spider_mbase_handler::show_index()

Deb-autobakes where failing with:

dh_missing: warning: usr/share/mysql/mysql-test/mysql-test-run exists in debian/tmp but is not installed to anywhere
dh_missing: warning: usr/share/mysql/mysql-test/mtr exists in debian/tmp but is not installed to anywhere
dh_missing: warning: usr/share/mysql/mysql-test/mariadb-test-run exists in debian/tmp but is not installed to anywhere
dh_missing: warning: usr/share/mysql/mysql-test/mysql-test-run.pl exists in debian/tmp but is not installed to anywhere

Add all to mariadb-test.install and remove mariadb-test.links

Applying b98375f9 instead of 9b32e4b1 for version 10.5-10.8.
Applying 5075f4e0 instead of 9b32e4b1 for version 10.9+.

AWK is used in autobake-debs.sh for printing information
about created DEB packages.

This can be rewrite with bash inner commands read and echo.

AWK in used in Debian SysV-init and postinst scripts to determine
is there enough space starting MariaDB database or create new
database to target destination.

These AWK scripts can be rewrited to use pure SH or help
using Coreutils which is mandatory for usage of MariaDB currently.

Reasoning behind this is to get rid of one very less used dependency

Extend the portability of ANALYZE FORMAT=JSON by using the microsecond
timer if cycles isn't available.

Reviewer: Sergei Petrunia <sergey@mariadb.com>

make the compile-time logic in my_timer_cycles() also #define
MY_TIMER_ROUTINE_CYCLES to indicate which implementation it is using.
Then, make my_timer_init() use MY_TIMER_ROUTINE_CYCLES.

This leaves us with just one set of compile-time #if's which determine
how we read time in #cycles.

Reviewer (and commit message author): Sergei Petrunia <sergey@mariadb.com>

This fixes up commit e3f6e1c9

log_free_check(): Assert that the caller must not hold
exclusive lock_sys.latch. This was the case for calls from
ibuf_delete_for_discarded_space(). This caused a deadlock with
another thread that would be holding a latch on a dirty page
that would need to be written so that the checkpoint would advance
and log_free_check() could return. That other thread was waiting
for a shared lock_sys.latch.

fil_delete_tablespace(): Do not invoke ibuf_delete_for_discarded_space()
because in DDL operations, we will be holding exclusive lock_sys.latch.

trx_t::commit(std::vector<pfs_os_file_t>&), innodb_drop_database(),
row_purge_remove_clust_if_poss_low(), row_undo_ins_remove_clust_rec(),
row_discard_tablespace_for_mysql():
Invoke ibuf_delete_for_discarded_space() on the deleted tablespaces after
releasing all latches.

page_cleaner_flush_pages_recommendation(): If dirty_pct is
between innodb_max_dirty_pages_pct_lwm
and innodb_max_dirty_pages_pct,
scale the effort relative to how close we are to
innodb_max_dirty_pages_pct.

The previous formula was missing a multiplication by 100.

Tested by: Axel Schwenke

followup for d1a46c68

remove ancient hard-coded treatment of --core-file. This enables
normal my_getopt behavior for the already existing sysvar

This addition to MDEV-30804 is relevant for 10.6+, it excludes
the mixed transaction section using both innodb and aria storage
engines from the galera_var_replicate_aria_off test, since such
transactions cannot be executed unless aria supports two-phase
transaction commit. No additional tests are required as this
commit fixes the mtr test itself.

The error was seen by a number of mtr tests being caused
by overdue initialization of rpl_parallel::LOCK_parallel_entry.
Specifically, SHOW-SLAVE-STATUS might find in
rpl_parallel::workers_idle() a gtid domain hash entry
already inserted whose mutex had not done
mysql_mutex_init().

Fixed with swapping the mutex init and the its entry's stack insertion.

Tested with a generous number of `mtr --repeat` of a few of the reported
to fail tests, incl rpl.parallel_backup.

buf_pool_t::page_cleaner_wakeup(): If for_LRU=true, wake up the page
cleaner immediately, also when it is in a timed wait. This avoids an
unnecessary delay of up to 1 second.

Timers require my_timer_init() call.
It was made only in mysqld_main(). Call it also from init_embedded_server().

When commit a5a2ef07
implemented asynchronous doublewrite, the writes via
the doublewrite buffer started to be counted incorrectly,
without multiplying them by innodb_page_size.

srv_export_innodb_status(): Correctly count the
Innodb_data_written.

buf_dblwr_t: Remove submitted(), because it is close to written()
and only Innodb_data_written was interested in it. According to
its name, it should count completed and not submitted writes.

Tested by: Axel Schwenke

If a replica failed to update the GTID slave state when committing
an XA PREPARE, the replica would retry the transaction and get an
out-of-order GTID error. This is because the commit phase of an XA
PREPARE is bifurcated. That is, first, the prepare is handled by the
relevant storage engines. Then second, the GTID slave state is
updated as a separate autocommit transaction. If the second phase
fails, and the transaction is retried, then the same transaction is
attempted to be committed again, resulting in a GTID out-of-order
error.

This patch fixes this error by immediately stopping the slave and
reporting the appropriate error. That is, there was logic to bypass
the error when updating the GTID slave state table if the underlying
error is allowed for retry on a parallel slave. This patch adds a
parameter to disallow the error bypass, thereby forcing the error
state to still happen.

Reviewed By
============
Andrei Elkin <andrei.elkin@mariadb.com>

When replicating MDL events for a table that uses system versioning
without primary keys, ensure that for data sets with duplicate
records, the updates to these records with duplicates are enacted on
the correct row. That is, there was a bug (reported in MDEV-30430)
such that the function to find the row to update would stop after
finding the first matching record. However, in the absence of
primary keys, the version of the record is needed to compare the row
to ensure we are updating the correct one.

The fix, therefore, updates the record comparison functionality to
use system version columns when there are no primary keys on the
table.

Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>

Removed trailing whitespaces

Problem:
========
A master can segfault if it can't set up decryption for its binary
log during a binlog dump with Using_Gtid=Slave_Pos. If slave
connects using GTID mode, the master will call into
log.cc::get_gtid_list_event(), which iterate through binlog events
looking for a Gtid_list_log_event. On an encrypted binlog that the
master cannot decrypt, the first event will be a
START_ENCRYPTION_EVENT which will call into the following decryption branch

if (fdle->start_decryption((Start_encryption_log_event*) ev))
  errormsg= ‘Could not set up decryption for binlog.’;

The event iteration however, does not stop in spite of this error.
The master will try to read the next event, but segfault while
trying to decrypt it because decryption failed to initialize.

Solution:
========
Break the event iteration if decryption cannot be set up.

Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>