SIGABRT is sent to relevant processes after a timeout


client/mysqltest.cc:
  Fixed signal handlers to mysqltest actually dumps core
mysql-test/lib/My/CoreDump.pm:
  Added support for dbx
mysql-test/lib/My/SafeProcess.pm:
  Added dump_core to force process to dump core
mysql-test/lib/My/SafeProcess/safe_process.cc:
  Traps SIGABRT and sends this on to child
mysql-test/mysql-test-run.pl:
  When test times out, force core dumps on mysqltest and servers

sync_slave_with_master
 - Additional patch for "disconnect $variable"

Problem 1: The test waits for an error in the slave sql thread,
then resolves the error and issues 'start slave'. However, there
is a gap between when the error is reported and the slave sql
thread stops. If this gap was long, the slave would still be
running when 'start slave' happened, so 'start slave' would fail
and cause a test failure.
Fix 1: Made wait_for_slave_sql_error wait for the slave to stop
instead of wait for error in the IO thread. After stopping, the
error code is verified. If the error code is wrong, debug info
is printed. To print debug info, the debug printing code in
wait_for_slave_param.inc was moved out to a new file,
show_rpl_debug_info.inc.
Problem 2: rpl_stm_mystery22 is a horrible name, the comments in
the file didn't explain anything useful, the test was generally
hard to follow, and the test was essentially duplicated between
rpl_stm_mystery22 and rpl_row_mystery22.
Fix 2: The test is about conflicts in the slave SQL thread,
hence I renamed the tests to rpl_{stm,row}_conflicts. Refactored
the test so that the work is done in
extra/rpl_tests/rpl_conflicts.inc, and
rpl.rpl_{row,stm}_conflicts merely sets some variables and then
sourced extra/rpl_tests/rpl_conflicts.inc.
The tests have been rewritten and comments added.
Problem 3: When calling wait_for_slave_sql_error.inc, you always
want to verify that the sql thread stops because of the expected
error and not because of some other error. Currently,
wait_for_slave_sql_error.inc allows the caller to omit the error
code, in which case all error codes are accepted.
Fix 3: Made wait_for_slave_sql_error.inc fail if no error code
is given. Updated rpl_filter_tables_not_exist accordingly.
Problem 4: rpl_filter_tables_not_exist had a typo, the dollar
sign was missing in a 'let' statement.
Fix 4: Added dollar sign.
Problem 5: When replicating from other servers than the one named
'master', the wait_for_slave_* macros were unable to print debug
info on the master.
Fix 5: Replace parameter $slave_keep_connection by
$master_connection.


mysql-test/extra/rpl_tests/rpl_conflicts.test:
  rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
  The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
  just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
  Also, cleaned up the test case a bit, and fixed BUG#37718.
mysql-test/include/show_rpl_debug_info.inc:
  Factored out the debug printing code from wait_for_slave_param.inc to
  a new file, show_rpl_debug_info.inc.
  Also removed the $slave_keep_connection parameter, and replaced it by
  $master_connection. This allows printing debug info on the master, no
  matter what the name of the master connection is.
mysql-test/include/start_slave.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/stop_slave.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/sync_slave_io_with_master.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_io_to_start.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_io_to_stop.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_param.inc:
  Factored out the debug printing code from wait_for_slave_param.inc to
  a new file, show_rpl_debug_info.inc.
  Also removed the $slave_keep_connection parameter, and replaced it by
  $master_connection. This allows printing debug info on the master, no
  matter what the name of the master connection is.
  Had to move the printing of debug info out of the while loop because
  of BUG number 41913.
mysql-test/include/wait_for_slave_sql_error.inc:
  Made it wait until the slave sql thread has stopped. This
  takes very short time and avoids race condition bugs in
  test cases (e.g., fixes BUG#37718).
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_sql_error_and_skip.inc:
  Since wait_for_slave_sql_error now waits for the slave sql
  thread to stop too, wait_for_slave_sql_error_and_skip does not
  have to wait for the slave sql thread to stop.
  Also, since wait_for_slave_sql_error now requires the parameter
  $slave_sql_errno to be set, wait_for_slave_sql_error_and_skip
  requires that as well: updated the usage instructions.
mysql-test/include/wait_for_slave_sql_to_start.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_sql_to_stop.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_to_start.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_to_stop.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/suite/rpl/r/rpl_row_conflicts.result:
  update result file
mysql-test/suite/rpl/r/rpl_stm_conflicts.result:
  update result file
mysql-test/suite/rpl/t/rpl_dual_pos_advance.test:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/suite/rpl/t/rpl_filter_tables_not_exist.test:
  Set $slave_sql_errno, since it is now required.
  Add dollar sign to $show_sql_error (without dollar sign,
  mtr makes it an environment variable).
mysql-test/suite/rpl/t/rpl_row_conflicts.test:
  rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
  The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
  just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
  Also, cleaned up the test case a bit, and fixed BUG#37718.
mysql-test/suite/rpl/t/rpl_row_mystery22.test:
  rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
  The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
  just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
  Also, cleaned up the test case a bit, and fixed BUG#37718.
mysql-test/suite/rpl/t/rpl_stm_conflicts.test:
  rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
  The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
  just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
  Also, cleaned up the test case a bit, and fixed BUG#37718.

conflicts:
  Text conflict in mysql-test/lib/mtr_report.pm
  Text conflict in mysql-test/mysql-test-run.pl

Problem: when mtr tries to create a directory, and the target
exists but is a file instead of directory, it tries several times
to create the directory again before it fails.
Fix: make it check if the target exists and is a non-directory.


mysql-test/lib/My/File/Path.pm:
  mkpath() now stops with appropriate error message if the target
  exists but is a non-directory.

If server has not been initialized as a slave (by CHANGE MASTER), then
SHOW SLAVE STATUS will return an empty set, and caused the waiting for
Slave_IO_running or Slave_SQL_running to 'No' fail.

This patch fixed the problem by return immediately if slave is not
initialized in include/wait_for_slave_*_to_stop.inc.


mysql-test/include/wait_for_slave_io_to_stop.inc:
  Return immediately if slave is not initialized
mysql-test/include/wait_for_slave_sql_to_stop.inc:
  Return immediately if slave is not initialized
mysql-test/include/wait_for_slave_to_stop.inc:
  Return immediately if slave is not initialized

mysqltest command 'shutdown_server' is supposed to shutdown the server
and wait for it to be gone, and kill it when timeout. But because the
arguments passed to my_kill were in the wrong order, 'shutdown_server'
does not wait nor kill the server at all. So after 'shutdown_server',
the server is still running, and the server may still accepting
connections.


mysql-test/include/mtr_warnings.sql:
  Suppress forcing close thread messages when server shuts down
mysql-test/include/restart_mysqld.inc:
  wait_until_disconnected.inc is not required after fix shutdown_server command

a minor improvement to the test to ease merging.

mysql-test/suite/rpl/r/rpl_server_id2.result:
  results changed.
mysql-test/suite/rpl/t/rpl_server_id2.test:
  masking out the until_pos which value is out of interest but
  it presence hurts merging between trees.

Bug#38540 rpl_server_id2 uses show slave status unnecessarily
            
Slave did not perform any event recorded into the relay log from some
different master when it was started with --replicate-same-server-id.
The reason appeared to be a consequence of BUG#38734 which stopped the
sql thread at its startup time.
      
The real fixes for the current bug are in the patch for BUG#38734.
This changeset carries only a regression test for the bugs.  Bug#38540
gets fixed too by means of eliminating an extra show slave status.


mysql-test/suite/rpl/r/rpl_server_id2.result:
  Bug#38934 Bug#38540 changed results.
mysql-test/suite/rpl/t/disabled.def:
  rpl_server_id2 is re-enabled.
mysql-test/suite/rpl/t/rpl_server_id2.test:
  regression test for BUG#38734 is added.
  Bug#38540 requirement to get rid of show slave status is implemented.

mysql-test/include/wait_until_disconnected.inc:
  Allow 2013 as an expected error code

Note that this result set is different from that in 6.0/6.0-rpl.

mysql-test/lib/My/File/Path.pm:
  Extend 'copytree' to take an optional "umask" parameter that will be used while copying the files
mysql-test/mysql-test-run.pl:
  Pass umask 0022 to copytree so that the copied files will be created world readable and the mysqld
  can LOAD DATA INFILE them

Adding --loose-skip-falcon option to the mysqld options provided by MTR (v2) during mysqld bootstrap in order to avoid plugin (in this case Falcon) initialization of static variables etc. Options --loose-skip-innodb and --loose-skip-ndbcluster were already included.

This will fix Bug#41014 (falcon_bug_39708 fails in pushbuild in 6.0-rpl: "succeeded - should have failed")
in the case of MTR v2 (which currently is available in -rpl branches only). 
MTR v1 (e.g. in main 6.0 branch) does not have this problem.

It would be more ideal to remove the --loose-skip-* options and provide a single option disabling all plugin initialization instead, or have bootstrap do this by default. Server modifications are (most likely) needed to be able to do that.


mysql-test/mysql-test-run.pl:
  Reintroduced the --loose-skip-falcon bootstrap option used by the previous version of this test runner.

Adds $glob_basedir/sbin to search path when needed

      
The test reacted on the way how mtr orders arguments for the server
that are gathered from different source. It appeared that the opt-file
options were parsed before those that supplied to mtr via its command
line. In effect, the opt-file preferences got overriden by the command
line and some tests, like no-threads, were caught by surprise: a test
expects an option value that had been "hardcoded" into its opt-file
but gets another one.
This server options ordering problem exists on in the new rpl trees
mtr.  In option of the author of this patch, the opt-file shall be
considered as having the highest preference weight. The opt-file is
merely a part of the header of a test, namely a part that can not be
technically deployed along the test file.
It's unnatural for the test writer to provide both the opt file value
and a guard that guarantees the value will be set on in the run time.
It's logical to provide either one: the option and its value or the
guard.

Fixed with relocating parse of the opt file to be the last among
sources of the sever's options.

A side effect: fixing a small problem of resetting the suite options
at time the opt file starts parsing.

A side effect: main.log_bin_trust_function_creators_func is disabled to
be re-enabled with the fixes for bug#41003 will be merged from the main trees.


mysql-test/lib/mtr_cases.pm:
  Relocating parse of the opt file to be the last. This ensure the opt file is the last
  provider for the server options so that the opt-file options have the highest preference;
  fixing a separate issue of incorrect resetting the suite options for the server;
mysql-test/t/disabled.def:
  log_bin_trust_function_creators_func is disabled. Todo: to-reable when fixes for bug#41003
  will be merged from the main trees.

Added $glob_basedir/sbin to search path for relevant binaries

exact number of error. The patch does following:
1) Add new parameter $slave_sql_errno for wait_for_slave_sql_error.inc
2) Add waiting error 1062 (Duplicate PK) for slave SQL thread in test case.

where timeout can happen:
1. Added waiting start/stop slave to make sure that slave works properly.
2. Added cleanup for slave.
3. Updated related result files.

sync_with_master command. The patch add waiting of proper state of slave 
before sync with master.