Pre-definitions are allowed for non-embedded.
Failur catched with:
```
cmake ../../10.1 -DCMAKE_BUILD_TYPE=Debug -DCMAKE_CXX_COMPILER=g++-9
-DCMAKE_C_COMPILER=gcc-9 -DWITH_EMBEDDED_SERVER=ON -DCMAKE_BUILD_TYPE=Debug
-DPLUGIN_{ARCHIVE,TOKUDB,MROONGA,OQGRAPH,ROCKSDB,PERFSCHEMA,SPIDER,SPHINX}=N
-DMYSQL_MAINTAINER_MODE=ON -DNOT_FOR_DISTRIBUTION=ON
```
Alternative fix would be
```
--- a/sql/sql_acl.cc
+++ b/sql/sql_acl.cc
@@ -201,8 +201,10 @@ LEX_STRING current_user= { C_STRING_WITH_LEN("*current_user") };
 LEX_STRING current_role= { C_STRING_WITH_LEN("*current_role") };
 LEX_STRING current_user_and_current_role= { C_STRING_WITH_LEN("*current_user_and_current_role") };

+#ifndef EMBEDDED_LIBRARY
 class ACL_USER;
 static ACL_USER *find_user_or_anon(const char *host, const char *user, const char *ip);
+#endif
```

- `SET DEFAULT ROLE xxx [FOR yyy]` should say:
  "User yyy has not been granted a role xxx" if:
    - The current user (not the user `yyy` in the FOR clause) can see the
    role xxx. It can see the role if:
      * role exists in `mysql.roles_mappings` (traverse the graph),
      * If the current user has read access on `mysql.user` table - in
    that case, it can see all roles, granted or not.
    - Otherwise it should be "Invalid role specification".

In other words, it should not be possible to use `SET DEFAULT ROLE` to discover whether a specific role exist or not.

The immediate bug was caused by a failure to recognize a correct
position to stop the slave applier run in optimistic parallel mode.
There were the following set of issues that the analysis unveil.
1 incorrect estimate for the event binlog position passed to
  is_until_satisfied
2 wait for workers to complete by the driver thread did not account non-group events
  that could be left unprocessed and thus to mix up the last executed
  binlog group's file and position:
  the file remained old and the position related to the new rotated file
3 incorrect 'slave reached file:pos' by the parallel slave report in the error log
4 relay log UNTIL missed out the parallel slave branch in
  is_until_satisfied.

The patch addresses all of them to simplify logics of log change
notification in either the master and relay-log until case.
P.1 is addressed with passing the event into is_until_satisfied()
for proper analisis by the function.
P.2 is fixed by changes in handle_queued_pos_update().
P.4 required removing relay-log change notification by workers.
Instead the driver thread updates the notion of the current relay-log
fully itself with aid of introduced
bool Relay_log_info::until_relay_log_names_defer.

An extra print out of the requested until file:pos is arranged
with --log-warning=3.

Do not blindly disconnect the connection that is in WAIT_FOR
because it could happen that neither the disconnect nor the
SIGNAL would be processed before RESET would discard the signal.

Initialize the parameter PARAM::max_key_part when we iterate over the ranges to get estimates
from EITS.

MDEV-22111 ERROR 1064 & 1033 and SIGSEGV on CREATE TABLE w/ various charsets on 10.4/5 optimized builds | Assertion `(uint) (table_check_constraints - share->check_constraints) == (uint) (share->table_check_constraints - share->field_check_constraints)' failed

The code incorrectly assumed in multiple places that TYPELIB
values cannot have 0x00 bytes inside. In fact they can:

  CREATE TABLE t1 (a ENUM(0x61, 0x0062) CHARACTER SET BINARY);

Note, the TYPELIB value encoding used in FRM is ambiguous about 0x00.

So this fix is partial.

It fixes 0x00 bytes in many (but not all) places:

- In the middle or in the end of a value:
    CREATE TABLE t1 (a ENUM(0x6100) ...);
    CREATE TABLE t1 (a ENUM(0x610062) ...);

- In the beginning of the first value:
    CREATE TABLE t1 (a ENUM(0x0061));
    CREATE TABLE t1 (a ENUM(0x0061), b ENUM('b'));

- In the beginning of the second (and following) value of the *last* ENUM/SET
  in the table:

    CREATE TABLE t1 (a ENUM('a',0x0061));
    CREATE TABLE t1 (a ENUM('a'), b ENUM('b',0x0061));

However, it does not fix 0x00 when:

- 0x00 byte is in the beginning of a value of a non-last ENUM/SET
  causes an error:

   CREATE TABLE t1 (a ENUM('a',0x0061), b ENUM('b'));
   ERROR 1033 (HY000): Incorrect information in file: './test/t1.frm'

  This is an ambuguous case and will be fixed separately.
  We need a new TYPELIB encoding to fix this.

Details:

- unireg.cc

  The function pack_header() incorrectly used strlen() to detect
  a TYPELIB value length. Adding a new function typelib_values_packed_length()
  which uses TYPELIB::type_lengths[n] to detect the n-th value length,
  and reusing the new function in pack_header() and packed_fields_length()

- table.cc
  fix_type_pointers() assumed in multiple places that values cannot have
  0x00 inside and used strlen(TYPELIB::type_names[n]) to set
  the corresponding TYPELIB::type_lengths[n].

  Also, fix_type_pointers() did not check the encoded data for consistency.

  Rewriting fix_type_pointers() code to populate TYPELIB::type_names[n] and
  TYPELIB::type_lengths[n] at the same time, so no additional loop
  with strlen() is needed any more.

  Adding many data consistency tests.

  Fixing the main loop in fix_type_pointers() to use memchr() instead of
  strchr() to handle 0x00 properly.

  Fixing create_key_infos() to return the result in a LEX_STRING rather
  that in a char*.

MDEV-22451: SIGSEGV in __memmove_avx_unaligned_erms/memcpy from _my_b_write on CREATE after RESET MASTER

Analysis:
========
RESET MASTER TO # command deletes all binary log files listed in the index
file, resets the binary log index file to be empty, and creates a new binary
log with number #. When the user provided binary log number is greater than
the max allowed value '2147483647' server fails to generate a new binary log.
The RESET MASTER statement marks the binlog closure status as
'LOG_CLOSE_TO_BE_OPENED' and exits. Statements which follow RESET MASTER
try to write to binary log they find the log_state != LOG_CLOSED and
proceed to write to binary log cache and it results in crash.

Fix:
===
During MYSQL_BIN_LOG open, if generation of new binary log name fails then the
"log_state" needs to be marked as "LOG_CLOSED". With this further statements
will find binary log as closed and they will skip writing to the binary log.

For no good reason, innodb_encryption_threads was limited to
4,294,967,295. Expectedly, the server would crash if such an
insane value was specified. Let us limit the maximum to 255.

The encryption threads are not doing much useful work.
They are basically only dirtying pages by performing
dummy writes via the redo log. The encryption key rotation
or the in-place addition or removal of encryption
will take place in the page cleaner.

In a quick test on a 20-core CPU (40 threads in total),
the sweet spot on an otherwise idle server seemed to be
innodb_encryption_threads=16 for the test
encryption.encrypt_and_grep. The new limit 255 should be
more than enough for even bigger servers.

This is a new test from upstream that did not expect the correct value
of the command slot of the Dump thread when the latter gets killed.

The test is made to expect "Killed" string as the command
in show-processlist as it is supposed to when a thread gets killed.

The assert was caused by early cleanup of a user variable participant
in BINLOG @var,@var where it plays twice. That was unexpected by the base
code to clear its value prematurely.

Fixed with relocating the user var destruction after operations with
its value is over.

Localhost, depending on the platform can return any
127.0.0.1/8 address.

The code erroneously allowed both:
INSERT INTO t1 (vcol) VALUES (DEFAULT);
INSERT INTO t1 (vcol) VALUES (DEFAULT(non_virtual_column));

The former is OK, but the latter is not.
Adding a new virtual method in Item:

virtual bool vcol_assignment_allowed_value() const { return false; }

Item_null, Item_param and Item_default_value override it.

Item_default_value overrides it in the way to:
- allow DEFAULT
- disallow DEFAULT(col)

For the case when the optimizer does the IN-EXISTS transformation,
the equality condition is injected in the WHERE OR HAVING clause of
the subquery. If the select list of the subquery has a reference to
the parent select make sure to use the reference and not the original
item.

On a checksum failure of a ROW_FORMAT=COMPRESSED page,
buf_LRU_free_one_page() would invoke buf_LRU_block_remove_hashed()
which will read the uncompressed page frame, although it would not
be initialized. With bad enough luck, fil_page_get_type(page)
could return an unrecognized value and cause the server to abort.

buf_page_io_complete(): On the corruption of a ROW_FORMAT=COMPRESSED
page, zerofill the uncompressed page frame.

TRUNCATE(decimal_5_5) erroneously tried to create a DECIMAL(0,0) column.
Creating a DECIMAL(1,0) column instead.

MDEV-22503 MDB limits DECIMAL column precision to 16 doing CTAS with floor/ceil over DECIMAL(X,Y) where X > 16

The DECIMAL data type branch in Item_func_int_val::fix_length_and_dec()
incorrectly used DOUBLE-style length calculation, which resulted in
a smaller data type than the actual result of FLOOR()/CEIL() needs.

Let us limit the maximum value of the debug parameter
innodb_data_file_size to 256 MiB. It is only being used
in the test innodb.log_data_file_size, and the size
of the system tablespace should never exceed some 70 MiB
in ./mtr. Thus, 256 MiB should be a reasonable limit.

The fact that negative values that are passed to unsigned parameters
wrap around to the maximum value appears to be a regression due to
commit 18ef02b0
and has been filed as bug MDEV-22219.

under LOCK TABLES we still have to open everything, otherwise DML
prelocking will try to take an MDL on a table that wasn't in the
LOCK TABLES list.

The InnoDB insert buffer was upgraded in MySQL 5.5 into a change
buffer that also covers delete-mark and delete (purge) operations.

There is an important constraint for delete operations: a B-tree
leaf page must not become empty unless the entire tree becomes empty,
consisting of an empty root page. Because change buffer merges only
occur on a single leaf page at a time, delete operations must not be
buffered if it is possible that the last record of the page could be
deleted. (In that case, we would refuse to use the change buffer, and
if we really delete the last record, we would shrink the index tree.)

The function ibuf_get_volume_buffered_hash() is part of our insurance
that the page would not become empty. It is supposed to map each
buffered INSERT or DELETE_MARK record payload into a hash value.
We will only count each such record as a distinct key if there is no
hash collision. DELETE operations will always decrement the predicted
number fo records in the page.

Due to a bug in the function, we would actually compute the hash value
not only on the record payload, but also on some following bytes,
in case the record contains NULL values. In MySQL Bug #61104, we had
some examples of this dating back to 2012. But back then, we failed to
reproduce the bug, and in commit d84c9557
we simply demoted the hard assertion to a message printout and a debug
assertion failure.

ibuf_get_volume_buffered_hash(): Correctly compute the hash value
of the payload bytes only. Note: we will consider
('foo','bar'),(NULL,'foobar'),('foob','ar') to be equal, but this
is not a problem, because in case of a hash collision, we could
also consider ('boo','far') to be equal, and underestimate the number
of records in the page, leading to refusing to buffer a DELETE.

only MDL-prelock but do not open FK child tables for read-only (RESTRICT)
FK actions.

Tables still needs to be opened for CASCADE actions, see 9180e866

We must ensure that the NUL will not terminate the query string.

Replace the 30-second sleep in the test with proper
DEBUG_SYNC interlocking.

MDEV-21437 MariaDB's SUSE/SLES packages don't "provide" all of the same capabilities as the platform's default packages

		FOREIGN_KEY_CHECKS is disabled

- Referenced index can be null While renaming the referenced column name.
In that case, rename the referenced column name in dict_foreign_t and
find the equivalent referenced index.