Add ChangeLog entry for r4994.

  ------------------------------------------------------------------------
  r4994 | marko | 2009-05-14 15:04:55 +0300 (Thu, 14 May 2009) | 18 lines

  branches/5.1: Prevent a race condition in innobase_commit() by ensuring
  that innodb_commit_concurrency>0 remains constant at run time. (Bug #42101)

  srv_commit_concurrency: Make this a static variable in ha_innodb.cc.

  innobase_commit_concurrency_validate(): Check that innodb_commit_concurrency
  is not changed from or to 0 at run time.  This is needed, because
  innobase_commit() assumes that innodb_commit_concurrency>0 remains constant.
  Without this limitation, the checks for innodb_commit_concurrency>0
  in innobase_commit() should be removed and that function would have to
  acquire and release commit_cond_m at least twice per invocation.
  Normally, innodb_commit_concurrency=0, and introducing the mutex operations
  would mean significant overhead.

  innodb_bug42101.test, innodb_bug42101-nonzero.test: Test cases.

  rb://123 approved by Heikki Tuuri
  ------------------------------------------------------------------------

Add ChangeLog entry for r4977.

  ------------------------------------------------------------------------
  r4976 | marko | 2009-05-13 15:44:54 +0300 (Wed, 13 May 2009) | 6 lines

  branches/5.1: Display DB_ROLL_PTR in the COLUMNS section of the
  innodb_table_monitor output.  It was accidentally omitted due to an
  off-by-one loop condition.  (Bug #44320)

  rb://116 approved by Heikki Tuuri
  ------------------------------------------------------------------------

This addresses Mantis Issue #23 in InnoDB Hot Backup and some
of MySQL Bug #41609.

In MLOG_FILE_CREATE, we need to distinguish temporary tables, so that
InnoDB Hot Backup can work correctly.  It turns out that we can do this
easily, by using a bit of the previously unused parameter for page number.
(The page number parameter of MLOG_FILE_CREATE has been written as 0 
ever since MySQL 4.1, which introduced MLOG_FILE_CREATE.)

MLOG_FILE_FLAG_TEMP: A flag for indicating a temporary table in
the page number parameter of MLOG_FILE_ operations.

fil_op_write_log(): Add the parameter log_flags.

fil_op_log_parse_or_replay(): Add the parameter log_flags.
Do not replay MLOG_FILE_CREATE when MLOG_FILE_FLAG_TEMP is set in log_flags.
This only affects ibbackup --apply-log.  InnoDB itself never replays file
operations.

rb://117 approved by Heikki Tuuri

The insert buffer tree is a clustered index.

prebuilt->index_usable, as suggested by Michael.

will be updated in ibuf_insert_low() and updated from the
insert buffer tree page to the secondary index tree page
during the insert buffer merge.

row_merge_is_index_usable() earlier, to make the logic clearer.

errors from row_search_for_mysql() in the error log.
The errors will still be ignored by CHECK TABLE.
This is somewhat related to Issue #211.

and undo_no_t. Each type is still defined as dulint.

This is an initial step towards replacing dulint with a 64-bit data type.
Because modern compilers have no trouble supporting 64-bit arithmetics
even on 32-bit targets, the dulint struct is a relic that should go.

The last remaining major use of dulint is dictionary IDs
(table, index, and row ids).

rb://114 approved by Sunny Bains

row_unlock_for_mysql(): Add a const qualifier to read-only rec_t*.
Use dict_index_is_clust().

CMakeLists.txt: svn propset svn:eol-style native.

Add aux config programs to emulate the newly added checks in plug.in
(from r4678).

Add comment and copyright notice to the aux config program.

Rename the aux config program and give it a more specific name because
more are coming.

Silence a compiler warning.

Include the needed header for memset().

Silence warning about unused variables.

Add ChangeLog entry for t4748.

  ------------------------------------------------------------------------
  r4746 | vasil | 2009-04-18 00:32:08 +0300 (Sat, 18 Apr 2009) | 110 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
     M /branches/5.1/include/pars0pars.h
  
  branches/5.1:
  
  Merge a change from MySQL:
  
    ------------------------------------------------------------
    revno: 2728.10.2
    committer: Ignacio Galarza <iggy@mysql.com>
    branch nick: mysql-5.1-bugteam-bug29125
    timestamp: Fri 2009-02-13 11:41:47 -0500
    message:
      Bug#29125 Windows Server X64: so many compiler warnings
      - Remove bothersome warning messages.  This change focuses on the warnings 
      that are covered by the ignore file: support-files/compiler_warnings.supp.
      - Strings are guaranteed to be max uint in length
    modified:
      client/mysql_upgrade.c
      client/mysqladmin.cc
      client/mysqlbinlog.cc
      client/mysqlcheck.c
      client/mysqldump.c
      client/mysqlslap.c
      client/mysqltest.cc
      client/sql_string.cc
      extra/comp_err.c
      extra/yassl/src/buffer.cpp
      extra/yassl/taocrypt/include/block.hpp
      extra/yassl/taocrypt/src/algebra.cpp
      extra/yassl/taocrypt/src/asn.cpp
      include/config-win.h
      libmysql/libmysql.c
      mysys/array.c
      mysys/base64.c
      mysys/charset.c
      mysys/checksum.c
      mysys/default.c
      mysys/default_modify.c
      mysys/hash.c
      mysys/mf_keycache.c
      mysys/mf_tempdir.c
      mysys/my_append.c
      mysys/my_compress.c
      mysys/my_conio.c
      mysys/my_copy.c
      mysys/my_getwd.c
      mysys/my_pread.c
      mysys/my_quick.c
      mysys/my_read.c
      mysys/safemalloc.c
      mysys/string.c
      server-tools/instance-manager/buffer.cc
      server-tools/instance-manager/instance.cc
      server-tools/instance-manager/options.cc
      server-tools/instance-manager/parse.h
      sql-common/client.c
      sql-common/my_user.c
      sql/event_data_objects.cc
      sql/event_parse_data.cc
      sql/events.cc
      sql/gen_lex_hash.cc
      sql/item.h
      sql/item_func.cc
      sql/item_strfunc.cc
      sql/item_timefunc.cc
      sql/lock.cc
      sql/log_event.cc
      sql/log_event.h
      sql/log_event_old.cc
      sql/net_serv.cc
      sql/sp_head.h
      sql/spatial.h
      sql/sql_class.h
      sql/sql_connect.cc
      sql/sql_crypt.cc
      sql/sql_error.cc
      sql/sql_insert.cc
      sql/sql_lex.cc
      sql/sql_lex.h
      sql/sql_load.cc
      sql/sql_prepare.cc
      sql/sql_profile.cc
      sql/sql_repl.cc
      sql/sql_servers.cc
      sql/sql_string.cc
      sql/sql_table.cc
      sql/sql_trigger.cc
      sql/sql_udf.cc
      sql/sql_view.cc
      sql/udf_example.c
      sql/uniques.cc
      storage/archive/azio.c
      storage/archive/azlib.h
      storage/csv/ha_tina.cc
      storage/csv/ha_tina.h
      storage/csv/transparent_file.h
      storage/federated/ha_federated.cc
      storage/federated/ha_federated.h
      storage/heap/hp_write.c
      storage/innobase/handler/ha_innodb.cc
      storage/innobase/include/pars0pars.h
      storage/myisam/ha_myisam.cc
      storage/myisam/mi_check.c
      storage/myisam/mi_packrec.c
      storage/myisam/mi_search.c
      storage/myisam/rt_index.c
      storage/myisammrg/ha_myisammrg.cc
      strings/ctype.c
      strings/my_vsnprintf.c
      tests/bug25714.c
      tests/mysql_client_test.c

All are non-functional changes:
- should check for long (not int), spotted by Sunny
- comment out the project definition, avoiding to generate another
  .sln file.

MySQL Reference Manual and use it in every string.
This fixes Issue #221.

This should have been done in r4631.  Spotted by Michael.

Add ChangeLog entry for r4717.

access

Mapping the atomic operations to Windows Interlocked functions:

os_compare_and_swap_* to InterlockedCompareExchange(64)
os_atomic_increment_* to InterlockedExchangeAdd(64)
os_atomic_test_and_set_byte to InterlockedExchange

In this patch, the legacy code under UNIV_CAN_USE_X86_ASSEMBLER is
removed all together, and add HAVE_WINDOWS_ATOMICS and
INNODB_RW_LOCKS_USE_ATOMICS to CMakeLists.txt

This is to address mantis issue#194.

rb://113

Approved by: Marko

Add ChangeLog entry for r4543.

Whitespace cleanup in ChangeLog

Fix typo in the ChangeLog

Add missing ChangeLog entries

(resolving conflict in r4574, r4575 and skipping r4699 and r4705 because
analogous changes to r4699 and r4705 were already made to branches/zip)

  ------------------------------------------------------------------------
  r4573 | vasil | 2009-03-30 14:17:13 +0300 (Mon, 30 Mar 2009) | 4 lines
  Changed paths:
     M /branches/5.1/mysql-test/innodb.test
  
  branches/5.1:
  
  Fix email address from dev@innodb.com to innodb_dev_ww@oracle.com
  
  ------------------------------------------------------------------------
  r4574 | vasil | 2009-03-30 14:27:08 +0300 (Mon, 30 Mar 2009) | 38 lines
  Changed paths:
     M /branches/5.1/Makefile.am
     M /branches/5.1/mysql-test/innodb.test
  
  branches/5.1:
  
  Restore the state of INNODB_THREAD_CONCURRENCY to silence this warning:
  
    TEST                                      RESULT   TIME (ms)
    ------------------------------------------------------------
    
    worker[1] Using MTR_BUILD_THREAD 250, with reserved ports 12500..12509
    main.innodb                              [ pass ]   8803
    
    MTR's internal check of the test case 'main.innodb' failed.
    This means that the test case does not preserve the state that existed
    before the test case was executed.  Most likely the test case did not
    do a proper clean-up.
    This is the diff of the states of the servers before and after the
    test case was executed:
    mysqltest: Logging to '/tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.log'.
    mysqltest: Results saved in '/tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result'.
    mysqltest: Connecting to server localhost:12500 (socket /tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/mysqld.1.sock) as 'root', connection 'default', attempt 0 ...
    mysqltest: ... Connected.
    mysqltest: Start processing test commands from './include/check-testcase.test' ...
    mysqltest: ... Done processing test commands.
    --- /tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result	2009-03-30 14:12:31.000000000 +0300
    +++ /tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.reject	2009-03-30 14:12:41.000000000 +0300
    @@ -99,7 +99,7 @@
     INNODB_SUPPORT_XA	ON
     INNODB_SYNC_SPIN_LOOPS	20
     INNODB_TABLE_LOCKS	ON
    -INNODB_THREAD_CONCURRENCY	8
    +INNODB_THREAD_CONCURRENCY	16
     INNODB_THREAD_SLEEP_DELAY	10000
     INSERT_ID	0
     INTERACTIVE_TIMEOUT	28800
    
    mysqltest: Result content mismatch
    
    not ok
  
  ------------------------------------------------------------------------
  r4575 | vasil | 2009-03-30 15:55:31 +0300 (Mon, 30 Mar 2009) | 8 lines
  Changed paths:
     M /branches/5.1/mysql-test/innodb.result
     M /branches/5.1/mysql-test/innodb.test
  
  branches/5.1:
  
  Fix Bug#43309 Test main.innodb can't be run twice
  
  Make the innodb mysql-test more flexible by inspecting how much a
  variable of interest has changed since the start of the test. Do not
  assume the variables have zero values at the start of the test.
  
  ------------------------------------------------------------------------
  r4576 | vasil | 2009-03-30 16:25:10 +0300 (Mon, 30 Mar 2009) | 4 lines
  Changed paths:
     M /branches/5.1/Makefile.am
  
  branches/5.1:
  
  Revert a change to Makefile.am that I committed accidentally in c4574.
  
  ------------------------------------------------------------------------
  r4659 | vasil | 2009-04-06 15:34:51 +0300 (Mon, 06 Apr 2009) | 6 lines
  Changed paths:
     M /branches/5.1/mysql-test/innodb.test
  
  branches/5.1:
  
  Followup to r4575 and the fix of Bug#43309 Test main.innodb can't be run twice:
  
  Add an explanatory comment, as suggested by Patrick Crews in the bug report.
  
  ------------------------------------------------------------------------
  r4699 | vasil | 2009-04-09 14:01:52 +0300 (Thu, 09 Apr 2009) | 15 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
     M /branches/5.1/include/srv0srv.h
     M /branches/5.1/page/page0cur.c
     M /branches/5.1/srv/srv0srv.c
  
  branches/5.1:
  
  Fix Bug#43660 SHOW INDEXES/ANALYZE does NOT update cardinality for indexes
  of InnoDB table
  
  by replacing the PRNG that is used to pick random pages with a better
  one.
  
  This is based on r4670 but also adds a new configuration option and
  enables the fix only if this option is changed. Please skip the present
  revision when merging.
  
  Approved by:	Heikki (via email)
  
  
  ------------------------------------------------------------------------
  r4705 | vasil | 2009-04-14 14:30:13 +0300 (Tue, 14 Apr 2009) | 5 lines
  Changed paths:
     M /branches/5.1/page/page0cur.c
  
  branches/5.1:
  
  When using the random function, first take the modulus by the number of pages
  and then typecast to ulint.
  
  ------------------------------------------------------------------------
  r4710 | vasil | 2009-04-15 11:55:18 +0300 (Wed, 15 Apr 2009) | 25 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
  
  branches/5.1:
  
  Merge a change from MySQL (looks like this is against 5.0 but they later
  merged it to 5.1):
  
    ------------------------------------------------------------
    revno: 1810.3846.1
    committer: Alexey Botchkov <holyfoot@mysql.com>
    branch nick: 31435
    timestamp: Tue 2008-11-11 14:42:32 +0400
    message:
      Bug#31435 ha_innodb.cc:3983: ulint convert_search_mode_to_innobase(ha_rkey_function): Asse 
          I think we don't need to issue an error statement in the convert_search_mode_to_innobase().
          Returning the PAGE_CUR_UNSUPP value is enough as allows to handle this
          case depending on the requirements.
      
      per-file comments:
        sql/ha_innodb.cc 
      Bug#31435 ha_innodb.cc:3983: ulint convert_search_mode_to_innobase(ha_rkey_function): Asse 
           no error issued in convert_search_mode_to_innobase.
           ha_innobase::records_in_range() returns HA_POS_ERROR if search mode isn't supported.
    modified:
      sql/ha_innodb.cc
  
  
  ------------------------------------------------------------------------

To make zlib and strings dynamically linked; mysqld will export
additional functions required by InnoDB.

Since the symbols will be resolved dynamically during runtime,
wdl_load_mapfile() is no longer able to make any function calls
to ones in mysqld. As the result, strtoull() (from strings.lib)
is replaced with _strtoui64().

rb://111

Approved by: Marko

When using the random function, first take the modulus by the number of pages
and then typecast to ulint.

CMakeLists.txt is completely rewritten with enhancements:
- Print out useful information, such as
  system name, directory, generator used,
  win64, Microsoft compiler, etc.
- Remove one workaround for mysqld.lib location.
  User does not need to specify a build type
  when invoking MSVC generator.

A new version will be committed, suggested by Ken.

CMakeLists.txt is completely rewritten:
- To replace the one written by mysql
- Print out some useful information, such as
  system name, directory, generator used,
  win64, Microsoft compiler, etc.
- Remove one workaround for mysqld.lib location.
  User does not need to specify a build type

dict_ind_redundant, dict_ind_compact: Declare these UNIV_INTERN.
innodb_hton_ptr: Declare static.  We do not attempt to access the
built-in InnoDB any more.
trx_roll_savepoints_free(): Declare UNIV_INTERN.

Add ChangeLog entry for r4678.