Move the S3 test case variables to suite.pm to use environment variables.

Use minio credentials if a TCP connection to localhost:9000 is accepted
so the current build works corrected.

Reviewer: Daniel Black

closes #1711

In commit 5e62b6a5 (MDEV-16264)
the logic of os_aio_init() was changed so that it will never fail,
but instead automatically disable innodb_use_native_aio (which is
enabled by default) if the io_setup() system call would fail due
to resource limits being exceeded. This is questionable, especially
because falling back to simulated AIO may lead to significantly
reduced performance.

srv_n_file_io_threads, srv_n_read_io_threads, srv_n_write_io_threads:
Change the data type from ulong to uint.

os_aio_init(): Remove the parameters, and actually return an error code.

thread_pool::configure_aio(): Do not silently fall back to simulated AIO.

Reviewed by: Vladislav Vaintroub

After commit a5a2ef07 (part of MDEV-23855)
implemented asynchronous doublewrite, it is possible that the server will
hang when the following parametes are in effect:

    innodb_doublewrite=1 (default)
    innodb_write_io_threads=1
    innodb_use_native_aio=0

Note: In commit 5e62b6a5 (MDEV-16264)
the logic of os_aio_init() was changed so that it will never fail,
but instead automatically disable innodb_use_native_aio (which is
enabled by default) if the io_setup() system call would fail due
to resource limits being exceeded.

Before commit a5a2ef07, we used
a synchronous write for the doublewrite buffer batches, always at
most 64 pages at a time. So, upon completing a doublewrite batch,
a single thread would submit at most 64 page writes (for the
individual pages that were first written to the doublewrite buffer).
With that commit, we may submit up to 128 page writes at a time.

The maximum number of outstanding requests per thread is 256.
Because the maximum number of asynchronous write submissions per
thread was roughly doubled, it is now possible that
buf_dblwr_t::flush_buffered_writes_completed() will hang in
io_slots::acquire(), called via os_aio() and fil_space_t::io(),
when submitting writes of the individual blocks.

We will prevent this type of hang by increasing the minimum number
of innodb_write_io_threads from 1 to 2, so that this type of hang
would only become possible when 512 outstanding write requests
are exceeded.

We observed a race condition that involved two threads
executing fil_flush_file_spaces() and one thread
executing fil_delete_tablespace(). After one of the
fil_flush_file_spaces() observed that
space.needs_flush_not_stopping() is set and was
releasing the fil_system.mutex, the other fil_flush_file_spaces()
would complete the execution of fil_space_t::flush_low() on
the same tablespace. Then, fil_delete_tablespace() would
destroy the object, because the value of fil_space_t::n_pending
did not prevent that. Finally, the fil_flush_file_spaces() would
resume execution and invoke fil_space_t::flush_low() on the freed
object.

This race condition was introduced in
commit 118e258a of MDEV-23855.

fil_space_t::flush(): Add a template parameter that indicates
whether the caller is holding a reference to prevent the
tablespace from being freed.

buf_dblwr_t::flush_buffered_writes_completed(),
row_quiesce_table_start(): Acquire a reference for the duration
of the fil_space_t::flush_low() operation. It should be impossible
for the object to be freed in these code paths, but we want to
satisfy the debug assertions.

fil_space_t::flush_low(): Do not increment or decrement the
reference count, but instead assert that the caller is holding
a reference.

fil_space_extend_must_retry(), fil_flush_file_spaces():
Acquire a reference before releasing fil_system.mutex.
This is what will fix the race condition.

Since commit ea21d630 we
conditionally define a variable that only plays a role on
systems that support hole-punching (explicit creation of sparse files).
However, that broke debug builds on such systems.

It turns out that the debug_dbug label "ignore_punch_hole" is
not at all used in MariaDB server. It would be covered by
the MySQL 5.7 test innodb.table_compress. (Note: MariaDB 10.1
implemented page_compressed tables before something comparable
appeared in MySQL 5.7.)

The flushing of the InnoDB temporary tablespace is unnecessarily
tied to the write-ahead redo logging and redo log checkpoints,
which must be tied to the page writes of persistent tablespaces.

Let us simply omit any pages of temporary tables from buf_pool.flush_list.
In this way, log checkpoints will never incur any 'collateral damage' of
writing out unmodified changes for temporary tables.

After this change, pages of the temporary tablespace can only be written
out by buf_flush_lists(n_pages,0) as part of LRU eviction. Hopefully,
most of the time, that code will never be executed, and instead, the
temporary pages will be evicted by buf_release_freed_page() without
ever being written back to the temporary tablespace file.

This should improve the efficiency of the checkpoint flushing and
the buf_flush_page_cleaner thread.

Reviewed by: Vladislav Vaintroub

MDEV-24278 improved the page cleaner so that it will no longer wake up
once per second on an idle server. However, with innodb_adaptive_flushing
(the default) the function page_cleaner_flush_pages_recommendation()
could initially return 0 even if there is work to do.

af_get_pct_for_dirty(): Remove. Based on a comment here, it appears
that an initial intention of innodb_max_dirty_pages_pct_lwm=0.0
(the default value) was to disable something. That ceased to hold in
MDEV-23855: the value is a pure threshold; the page cleaner will not
perform any work unless the threshold is exceeded.

page_cleaner_flush_pages_recommendation(): Add the parameter dirty_blocks
to ensure that buf_pool.flush_list will eventually be emptied.

..causes error on slave.
Cause: if the master doesn't have the frm file for the table,
DROP TABLE code will call ha_delete_table_force() to drop the table
in all available storage engines.
The issue was that this code path didn't check for
HTON_TABLE_MAY_NOT_EXIST_ON_SLAVE flag for the storage engine,
and so did not add "... IF EXISTS" to the statement that's written
to the binary log.  This can cause error on the slave when it tries to
drop a table that's already gone.

The counters in srv_stats use std::atomic and multiple cache lines per
counter. This is an overkill in a case where a critical section already
exists in the code. A regular variable will work just fine, with much
smaller memory bus impact.

This hang was caused by MDEV-23855, and we failed to fix it in
MDEV-24109 (commit 4cbfdeca).

When buf_flush_ahead() is invoked soon before server shutdown
and the non-default setting innodb_flush_sync=OFF is in effect
and the buffer pool contains dirty pages of temporary tables,
the page cleaner thread may remain in an infinite loop
without completing its work, thus causing the shutdown to hang.

buf_flush_page_cleaner(): If the buffer pool contains no
unmodified persistent pages, ensure that buf_flush_sync_lsn= 0
will be assigned, so that shutdown will proceed.

The test case is not deterministic. On my system, it reproduced
the hang with 95% probability when running multiple instances
of the test in parallel, and 4% when running single-threaded.

Thanks to Eugene Kosov for debugging and testing this.

This was noticed wben running "mtr --valgrind main.precedence"

The problem was that Item_func_like::escape could be left unitialized
when used with views combined with UNIONS like in:

create or replace view v1 as select 2 LIKE 1 ESCAPE 3 IN (SELECT 0 UNION SELECT 1), 2 LIKE 1 ESCAPE (3 IN (SELECT 0 UNION SELECT 1)), (2 LIKE 1 ESCAPE 3) IN (SELECT 0 UNION SELECT 1);

The above query causes in fix_escape_item()
escape_item->const_during_execution() to be true
and
escape_item->const_item() to be false

in which case 'escape' is never calculated.

The fix is to make the main logic of fix_escape_item() out to a
separate function and call that function once in Item.

Other things:
- Reorganized fields in Item_func_like class to make it more compact

The clang++ -stdlib=libc++ header file <fstream> depends on
<filesystem> that defines a member function path::root_name(),
which conflicts with the rather unused #define root_name()
that had been introduced in
commit 7c58e97b.

Because an instrumented -stdlib=libc++ (rather than the default
-stdlib=libstdc++) is easier to build for a working -fsanitize=memory
(cmake -DWITH_MSAN=ON), let us remove the conflicting #define for now.

Sorry, only tested commit 4174fc1a
on clang. Other compilers do not define __has_feature().

For some reason, commit 5bb5d4ad
made clang++-11 unhappy about a constexpr declaration.

For some reason, the test was never adjusted for
commit e6a50e41.

The Galera tests were massively failing with debug assertions.

Post-push Windows compilation errors fix.

Change thd->mdl_context.release_transactional_locks() to
thd->mdl_release_transactional_locks()

row_undo_ins_parse_undo_rec(): Do not try to read non-existing
virtual column information for the metadata record.

The replacement is buf_pool.contains_zip().

The new option --log-innodb-page-corruption is introduced.

When this option is set, backup is not interrupted if innodb corrupted
page is detected. Instead it logs all found corrupted pages in
innodb_corrupted_pages file in backup directory and finishes with error.

For incremental backup corrupted pages are also copied to .delta file,
because we can't do LSN check for such pages during backup,
innodb_corrupted_pages will also be created in incremental backup
directory.

During --prepare, corrupted pages list is read from the file just after
redo log is applied, and each page from the list is checked if it is allocated
in it's tablespace or not. If it is not allocated, then it is zeroed out,
flushed to the tablespace and removed from the list. If all pages are removed
from the list, then --prepare is finished successfully and
innodb_corrupted_pages file is removed from backup directory. Otherwise
--prepare is finished with error message and innodb_corrupted_pages contains
the list of the pages, which are detected as corrupted during backup, and are
allocated in their tablespaces, what means backup directory contains corrupted
innodb pages, and backup can not be considered as consistent.

For incremental --prepare corrupted pages from .delta files are applied
to the base backup, innodb_corrupted_pages is read from both base in
incremental directories, and the same action is proceded for corrupted
pages list as for full --prepare. innodb_corrupted_pages file is
modified or removed only in base directory.

If DDL happens during backup, it is also processed at the end of backup
to have correct tablespace names in innodb_corrupted_pages.

The reason for the failure is that
thd->mdl_context.release_transactional_locks()
was called after commit & rollback even in cases where the current
transaction is still active.

For 10.2, 10.3 and 10.4 the fix is simple:
- Replace all calls to thd->mdl_context.release_transactional_locks() with
  thd->release_transactional_locks(). The thd function will only call
  the mdl_context function if there are no active transactional locks.
  In 10.6 we will better fix where we will change the return value for
  some trans_xxx() functions to indicate if transaction did close the
  transaction or not. This will avoid the need of the indirect call.

Other things:
- trans_xa_commit() and trans_xa_rollback() will automatically
  call release_transactional_locks() if the transaction is closed.
- We can't do that for the other functions as the caller of many of these
  are doing additional work (like close_thread_tables) before calling
  release_transactional_locks().
- Added missing abort_result_set() and missing DBUG_RETURN in
  select_create::send_eof()
- Fixed wrong indentation in injector::transaction::commit()