test result fix

mysql-test/suite/funcs_1/r/is_columns_mysql.result:
  test result fix
mysql-test/suite/funcs_1/r/is_statistics.result:
  test result fix

BUG#41597 - After rename of user, there are additional grants
            when grants are reapplied.

Fixed build failure on Windows. Added missing cast.

sql/sql_acl.cc:
  Fixed build failure on Windows. Added missing cast.

Problem 1:
column_priv_hash uses utf8_general_ci collation
for the key comparison. The key consists of user name,
db name and table name. Thus user with privileges on table t1
is able to perform the same operation on T1
(the similar situation with user name & db name, see acl_cache).
So collation which is used for column_priv_hash and acl_cache
should be case sensitive.
The fix:
replace system_charset_info with my_charset_utf8_bin for
column_priv_hash and acl_cache
Problem 2:
The same situation with proc_priv_hash, func_priv_hash,
the only difference is that Routine name is case insensitive.
So the fix is to use my_charset_utf8_bin for
proc_priv_hash & func_priv_hash and convert routine name into lower
case before writing the element into the hash and
before looking up the key.
Additional fix: mysql.procs_priv Routine_name field collation
is changed to utf8_general_ci.
It's necessary for REVOKE command
(to find a field by routine hash element values).
Note: 
It's safe for lower-case-table-names mode too because
db name & table name are converted into lower case
(see GRANT_NAME::GRANT_NAME).


mysql-test/include/have_case_insensitive_fs.inc:
  test case
mysql-test/r/case_insensitive_fs.require:
  test case
mysql-test/r/grant_lowercase_fs.result:
  test result
mysql-test/r/lowercase_fs_off.result:
  test result
mysql-test/r/ps_grant.result:
  test result
mysql-test/r/system_mysql_db.result:
  changed Routine_name field collation to case insensitive
mysql-test/t/grant_lowercase_fs.test:
  test case
mysql-test/t/lowercase_fs_off.test:
  test case
scripts/mysql_system_tables.sql:
  changed Routine_name field collation to case insensitive
scripts/mysql_system_tables_fix.sql:
  changed Routine_name field collation to case insensitive
sql/sql_acl.cc:
  Problem 1:
  column_priv_hash uses utf8_general_ci collation
  for the key comparison. The key consists of user name,
  db name and table name. Thus user with privileges on table t1
  is able to perform the same operation on T1
  (the similar situation with user name & db name, see acl_cache).
  So collation which is used for column_priv_hash and acl_cache
  should be case sensitive.
  The fix:
  replace system_charset_info with my_charset_utf8_bin for
  column_priv_hash and acl_cache
  Problem 2:
  The same situation with proc_priv_hash, func_priv_hash,
  the only difference is that Routine name is case insensitive.
  So the fix is to use my_charset_utf8_bin for
  proc_priv_hash & func_priv_hash and convert routine name into lower
  case before writing the element into the hash and
  before looking up the key.
  Additional fix: mysql.procs_priv Routine_name field collation
  is changed to utf8_general_ci.
  It's necessary for REVOKE command
  (to find a field by routine hash element values).
  Note: 
  It's safe for lower-case-table-names mode too because
  db name & table name are converted into lower case
  (see GRANT_NAME::GRANT_NAME).

      
If the first argument to GeomFromWKB function is a geometry
field then the function just returns its value.
However in doing so it's not preserving first argument's 
null_value flag and this causes unexpected null value to
be returned to the calling function.
      
Fixed by updating the null_value of the GeomFromWKB function
in such cases (and all other cases that return a NULL e.g.
because of not enough memory for the return buffer).

Problem: involving a spatial index for "non-spatial" queries
(that don't containt MBRXXX() functions) may lead to failed assert.

Fix: don't use spatial indexes in such cases.


mysql-test/r/gis-rtree.result:
  Fix for bug#48258: Assertion failed when using a spatial index
    - test result.
mysql-test/t/gis-rtree.test:
  Fix for bug#48258: Assertion failed when using a spatial index
    - test case.
sql/opt_range.cc:
  Fix for bug#48258: Assertion failed when using a spatial index
    - allow only spatial functions (MBRXXX) for itMBR keyparts.

line 138 when forcing a spatial index

Problem: "Spatial indexes can be involved in the search 
for queries that use a function such as MBRContains() 
or MBRWithin() in the WHERE clause".
Using spatial indexes for JOINs with =, <=> etc.
predicates is incorrect.

Fix: disable spatial indexes for such queries.


mysql-test/r/select.result:
  Fix for bug#47019: Assertion failed: 0, file .\rt_mbr.c, 
  line 138 when forcing a spatial index
    - test result.
mysql-test/t/select.test:
  Fix for bug#47019: Assertion failed: 0, file .\rt_mbr.c, 
  line 138 when forcing a spatial index
    - test case.
sql/sql_select.cc:
  Fix for bug#47019: Assertion failed: 0, file .\rt_mbr.c, 
  line 138 when forcing a spatial index
    - disable spatial indexes for queries which use 
  non-spatial conditions (e.g. NATURAL JOINs).

Removed the verify callback, as it's not needed to verify even self
signed certificates and is a security problem.

                     grants are reapplied.


After renaming a user and trying to re-apply grants results in additional
grants.

This is because we use username as part of the key for GRANT_TABLE structure.
When the user is renamed, we only change the username stored and the hash key
still contains the old user name and this results in the extra privileges

Fixed by rebuilding the hash key and updating the column_priv_hash structure
when the user is renamed

mysql-test/r/grant3.result:
  Bug #41597 - After rename of user, there are additional grants when 
               grants are reapplied.
  
  Testcase for BUG#41597
mysql-test/t/grant3.test:
  Bug #41597 - After rename of user, there are additional grants when 
               grants are reapplied.
  
  Testcase for BUG#41597
sql/sql_acl.cc:
  Bug #41597 - After rename of user, there are additional grants when 
               grants are reapplied.
  
  Fixed handle_grant_struct() to update the hash key when the user is renamed.
  Added to set_user_details() method to GRANT_NAME class

If a thread is killed in the server, we throw "shutdown" only if one is actually in
progress; otherwise, we throw "query interrupted".

Control-C in the mysql command-line client is "incremental" now.
First Control-C sends KILL QUERY (when connected to 5.0+ server, otherwise, see next)
Next  Control-C sends KILL CONNECTION
Next  Control-C aborts client.

As the first two steps only pertain to an existing query,
Control-C will abort the client right away if no query is running.

client will give more detailed/consistent feedback on Control-C now.


client/mysql.cc:
  Extends Control-C handling; enhances up feedback to user.
  
  On 5.0+ servers, we try to be nice and send KILL QUERY first
  if Control-C is pressed in the command-line client, but if
  that doesn't work, we now give the user the opportunity to
  send KILL CONNECTION with another Control-C (and to kill the
  client with another Control-C if that somehow doesn't work
  either).
mysql-test/t/flush_read_lock_kill.test:
  we're getting correct "thread killed" rather than
  "in shutdown" error now
mysql-test/t/kill.test:
  we're getting correct "thread killed" rather than
  "in shutdown" error now
mysql-test/t/rpl000001.test:
  we're getting correct "thread killed" rather than
  "in shutdown" error now
mysql-test/t/rpl_error_ignored_table.test:
  we're getting correct "thread killed" rather than
  "in shutdown" error now
sql/records.cc:
  make error messages on KILL uniform for rr_*()
  by folding that handling into rr_handle_error()
sql/sql_class.h:
  Only throw "shutdown" when we have one flagged as being in progress;
  otherwise, throw "query interrupted" as it's likely to be "KILL CONNECTION"
  or related.

Use "#ifdef", not plain "#if".

The bug is a compilation issue:
Function "find_key_block()" had thread operations
which were not guarded by "#if THREAD", add that now.

mysys/mf_keycache.c:
  Without thread-support, we are in a single-threaded world,
  so there is no parallelism, and the keycache cannot be
  within a resize operation while this request is being processed.

can lead to bad memory access

Problem: Field_bit is the only field which returns INT_RESULT
and doesn't have unsigned flag. As it's not a descendant of the 
Field_num, so using ((Field_num *) field_bit)->unsigned_flag may lead
to unpredictable results.

Fix: check the field type before casting.


mysql-test/r/type_bit.result:
  Fix for bug #42803: Field_bit does not have unsigned_flag field,
  can lead to bad memory access
    - test result.
mysql-test/t/type_bit.test:
  Fix for bug #42803: Field_bit does not have unsigned_flag field,
  can lead to bad memory access
    - test case.
sql/opt_range.cc:
  Fix for bug #42803: Field_bit does not have unsigned_flag field,
  can lead to bad memory access
    - don't cast to (Field_num *) Field_bit, as it's not a Field_num
  descendant and is always unsigned by nature.

The pthread_cond_wait implementations for windows might
dead lock in some rare circumstances.

1) One thread (I) enter a timed wait and at a point in
   time ends up after mutex unlock and before
   WaitForMultipleObjects(...)
2) Another thread (II) enters pthread_cond_broadcast.
   Grabs the mutex and discovers one waiter. It set
   the broadcast event and closes the broadcast gate
   then unlocks the mutex.
3) A third thread (III) issues a pthread_cond_signal.
   It grabs the mutex, discovers one waiter, sets the
   signal event then unlock the mutex.
4) The first threads (I) enters WaitForMultipleObjects
   and finds out that the signal object is in a
   signalled state and exits the wait.
5) Thread (I) grabs the mutex and checks result status.
   The number of waiters is decreased and becomes equal
   to 0. The event returned was a signal event so the
   broadcast gate isn't opened. The mutex is released.
6) Thread (II) issues a new broadcast. The mutex is
   acquired but the number of waiters are 0 hence
   the broadcast gate remains closed.
7) Thread (I) enters the wait again but is blocked by
   the broadcast gate.

      This fix resolves the above issue by always resetting
      broadcast gate when there are no more waiters in th queue.


mysys/my_wincond.c:
  * Always reset the broadcast gate if there are no more waiters left.

                    Removes the need of a hack (the jump to label).

sql/sql_parse.cc:
  DBUG macros are wrapped inside a loop. Allow to break
  the command switch from within a DBUG macro.

On Mac OS X or Windows, sending a SIGHUP to the server or a
asynchronous flush (triggered by flush_time), would cause the
server to crash.

The problem was that a hook used to detach client API handles
wasn't prepared to handle cases where the thread does not have
a associated session.

The solution is to verify whether the thread has a associated
session before trying to detach a handle.

mysql-test/r/federated_debug.result:
  Add test case result for Bug#47525
mysql-test/t/federated_debug-master.opt:
  Debug point.
mysql-test/t/federated_debug.test:
  Add test case for Bug#47525
sql/slave.cc:
  Check whether a the thread has a associated session.
sql/sql_parse.cc:
  Add debug code to simulate a reload without thread session.

Make configure.js bail with an error if trying to build bdb from a bzr
tree.

          'flush tables' crashes

The server crashes when 'show procedure status' and 'flush tables' are
run concurrently.

This is caused by the way mysql.proc table is added twice to the list
of table to lock although the requirements on the current locking API
assumes differently.

No test case is submitted because of the nature of the crash which is 
currently difficult to reproduce in a deterministic way.

This is a backport from 5.1

myisam/mi_dbug.c:
  * check_table_is_closed is only used in EXTRA_DEBUG mode but since it is
  iterating over myisam shared data it still needs to be protected by an
  appropriate mutex.
sql/sql_yacc.yy:
  * Since the I_S mechanism is already handling the open and close of 
  mysql.proc there is no need for the method sp_add_to_query_tables.

> ------------------------------------------------------------
> revno: 2802.1.1
> tags: mysql-5.0.86
> revision-id: hery.ramilison@sun.com-20090909185217-mooeczu391ztp2fz
> parent: joro@sun.com-20090902123318-8qe40pr91xmui5ue
> committer: hery <hery.ramilison@sun.com>
> branch nick: mysql-5.0.86-release
> timestamp: Wed 2009-09-09 20:52:17 +0200
> message:
>   change c++ comment to c comment

> ------------------------------------------------------------
> revno: 2796
> revision-id: sergey.glukhov@sun.com-20090827102219-sgjz0v5t1rfccs14
> parent: joro@sun.com-20090824122803-1d5jlaysjc7a7j6q
> committer: Sergey Glukhov <Sergey.Glukhov@sun.com>
> branch nick: mysql-5.0-bugteam
> timestamp: Thu 2009-08-27 15:22:19 +0500
> message:
>   Bug#46184 Crash, SELECT ... FROM derived table procedure analyze
>   The crash happens because select_union object is used as result set
>   for queries which have derived tables.
>   select_union use temporary table as data storage and if
>   fields count exceeds 10(count of values for procedure ANALYSE())
>   then we get a crash on fill_record() function.

> ------------------------------------------------------------
> revno: 2791.2.3
> revision-id: joro@sun.com-20090827114042-h55n7qp9990bl6ge
> parent: anurag.shekhar@sun.com-20090831073231-e55y1hsck6n08ux8
> committer: Georgi Kodinov <joro@sun.com>
> branch nick: B46749-5.0-bugteam
> timestamp: Thu 2009-08-27 14:40:42 +0300
> message:
>   Bug #46749: Segfault in add_key_fields() with outer subquery level 
>     field references
>   
>   This error requires a combination of factors : 
>   1. An "impossible where" in the outermost SELECT
>   2. An aggregate in the outermost SELECT
>   3. A correlated subquery with a WHERE clause that includes an outer 
>   field reference as a top level WHERE sargable predicate
>   
>   When JOIN::optimize detects an "impossible WHERE" it will bail out
>   without doing the rest of the work and initializations. It will not
>   call make_join_statistics() as well.  And make_join_statistics fills 
>   in various structures for each table referenced.
>   When processing the result of the "impossible WHERE" the query must
>   send a single row of data if there are aggregate functions in it.
>   In this case the server marks all the aggregates as having received 
>   no rows and calls the relevant Item::val_xxx() method on the SELECT
>   list. However if this SELECT list happens to contain a correlated 
>   subquery this subquery is evaluated in a normal evaluation mode.
>   And if this correlated subquery has a reference to a field from the 
>   outermost "impossible where" SELECT the add_key_fields will mistakenly
>   consider the outer field reference as a "local" field reference when 
>   looking for sargable predicates.
>   But since the SELECT where the outer field reference refers to is not
>   completely initialized due to the "impossible WHERE" in this level
>   we'll get a NULL pointer reference.
>   Fixed by making a better condition for discovering if a field is "local"
>   to the SELECT level being processed. 
>   It's not enough to look for OUTER_REF_TABLE_BIT in this case since 
>   for outer references to constant tables the Item_field::used_tables() 
>   will return 0 regardless of whether the field reference is from the 
>   local SELECT or not.