A search with PAGE_CUR_GE may land on the supremum record on
a leaf page that is not the rightmost leaf page.
This could occur when all keys on the current page are
smaller than the search key, and the smallest key on the
successor page is larger than the search key.

ibuf_delete_recs(): Correct the debug assertion accordingly.

Closes #1407

mtr_t::Impl, mtr_t::Command: Merge to mtr_t.

MTR_MAGIC_N: Remove.

MTR_STATE_COMMITTING: Remove. This state was only being set
internally during mtr_t::commit().

mtr_t::Command::m_locks_released: Remove (set-and-never-read member).

mtr_t::Command::m_start_lsn: Replaced with the return value of
finish_write() and a parameter to release_blocks().

mtr_t::Command::m_end_lsn: Removed as a duplicate of mtr_t::m_commit_lsn.

mtr_t::Command::prepare_write(): Replace a switch () with a
comparison against 0. Only 2 m_log_mode are allowed.

Avoid creating std::vector, and use single instead of double traversal.

Problem:
========
CURRENT_TEST: binlog_encryption.rpl_corruption

mysqltest: In included file "./include/wait_for_slave_io_error.inc":
...
At line 72: Slave stopped with wrong error code
**** Slave stopped with wrong error code: 1743 (expected 1595,1913) ****

Analysis:
========
The test emulates the corruption at the various stages of replication for
example in binlog file, in network and in relay log etc. It verifies that all
corruption cases are handled through appropriate error messages.

The test cases which emulate network failure expect following errors.
--ER_SLAVE_RELAY_LOG_WRITE_FAILURE (1595)
--ER_NETWORK_READ_EVENT_CHECKSUM_FAILURE (1743)

Ideally test should expect error codes as 1595 and 1743.
But the test actually waits on incorrect error code 1595,1913

Fix:
===
Added appropriate error code for 'ER_NETWORK_READ_EVENT_CHECKSUM_FAILURE'.
Replaced 1913 with 1743.

The XDES_CLEAN_BIT is always set for every element of
the page allocation bitmap in the extent descriptor pages.
Do not bother touching it, to avoid redundant writes.

The DICT_HDR_MAX_SPACE_ID was already zero-initialized at page allocation.

page_rec_write_field(): Remove.

dict_create_index_tree_step(): If the SYS_INDEXES.PAGE does not change,
do not update it in the data dictionary. Typically, all index page numbers
would be unchanged before and after IMPORT TABLESPACE, except if some
secondary indexes were created after loading some data.

btr_root_fseg_adjust_on_import(): Remove the redundant mtr_t* parameter.
Redo logging is disabled during the page adjustments that IMPORT TABLESPACE
is performing.

The root page must never have any siblings, so it is unnecessary
to clear those fields.

fsp_alloc_seg_inode_page(): Ever since
commit 3926673c
all newly allocated pages are zero-initialized.
Assert that this is the case for the FSEG_ID fields.

btr_store_big_rec_extern_fields(): Remove the redundant initialization
of the most significant 32 bits of BTR_EXTERN_LEN. InnoDB never supported
BLOBs that are longer than 4GiB. In fact, dtuple_convert_big_rec()
would write emit an error message if a clustered index record tuple would
exceed 1,000,000,000 bytes in length.

The BTR_EXTERN_LEN in the BLOB pointers in clustered index leaf page
records is zero-initialized at least since
commit 41bb3537

Remove the unnecessary retrieval and null-modifications of
the preceding page.

Remove the redundant parameter mtr_t*.

Make use of page_has_prev(), page_has_next() whenever possible.

Remove the unnecessary retrieval and null-modifications of
the preceding page.

MDEV-19376 Repl_semi_sync_master::commit_trx assertion failure: ... || !m_active_tranxs->is_tranx_end_pos(trx_wait_binlog_name, trx_wait_binlog_pos)

The assert indicates that the current transaction got caught uncleaned from
the semisync master's cache when it is signaled to proceed upon its
ack receive.

The reason of missed cleanup turns out to be a flaw in the gtid
connect mode.
A submitted by connecting slave value of its last received event's
binlog file *name* was adopted into
{{Repl_semi_sync_master::m_reply_file_name}} as a part of semisync
initialization.

Notice that the initialization still refines the position part of the
submitted last received event's binlog coordinates.
The master side binlog filename:pos refinement is
specific to the gtid connect mode for purpose of computing the latest
binlog file to resume slave feeding from.
Effectively in the gtid connect mode the computed resumption filename:pos
may appear smaller in which case a new post-connect time committing
transaction may be logged with its filename:pos also less than the
submitted coordinates and that triggers the assert.

Fixed with making the semisync initialization to use the refined filename:pos.
It is guaranteed to be less than any new generated transaction's binlog:pos.

Make sure failure to find mariabackup binary does not terminate
the script silently, terminate with a clear error message instead

The issue here is the wrong estimate of the cardinality of a partial join,
the cardinality is too high because the function table_cond_selectivity()
returns an absurd number 100 while selectivity cannot be greater than 1.

When accessing table t by outer reference t1.a via index we do not perform any
range analysis for t. Yet we see TABLE::quick_key_parts[key] and
TABLE->quick_rows[key] contain a non-zero value though these should have been
remained untouched and equal to 0.

Thus real cause of the problem is that TABLE::init does not clean the arrays
TABLE::quick_key_parts[] and TABLE::>quick_rows[].
It should have done it because the TABLE structure created for any
instance of a table can be reused for many queries.

dict_index_add_to_cache(): Make the 'index' a reference to a pointer,
so that the caller will avoid the expensive call to
dict_index_get_if_in_cache_low().

Due to a data corruption bug that may have occurred a long time earlier
(possibly involving physical backup and MySQL Bug #69122, which was
addressed in commit f166ec71)
it seems possible that the InnoDB change buffer might end up containing
entries, while no buffered changes exist according to the change buffer
bitmap pages in the .ibd files.

ibuf_delete_recs(): New function, to be invoked on slow shutdown only.
Remove all buffered changes for a specific page.

ibuf_merge_or_delete_for_page(): If the change buffer bitmap is clean
and a slow shutdown is in progress, invoke ibuf_delete_recs().
We do not want to do that during normal operation, due to the additional
overhead that is involved. The bitmap page should be consistent with
the change buffer in the first place.

InnoDB: Assertion failure in file .../dict/dict0dict.cc line ...
InnoDB: Failing assertion: table->can_be_evicted

This fixes a regression that was caused by the fix of MDEV-20621
(commit a41d4297).
MySQL 5.6 (and MariaDB 10.0) introduced eviction of tables from
the InnoDB data dictionary cache. Tables that are connected to
FOREIGN KEY constraints or FULLTEXT INDEX are exempt of the eviction.
With the problematic change, a table that would already be exempt
from eviction due to FOREIGN KEY would cause the problem if there
also was a FULLTEXT INDEX defined on it.

dict_load_table(): Only prevent eviction if table->can_be_evicted holds.

Do not rely on existence of CMakeFiles/${target}.dir directory existence
It is not there for custom targets in Ninja build.

Don't save/restore HP_INFO as it could be changed by a concurrent thread.
different parts of HP_INFO are protected by different mutexes and
the mutex that protect most of the HP_INFO does not protect its open_list
data.

As a bonus, make heap_check_heap() to take const HP_INFO* and not
make any changes there whatsoever.

dict_table_rename_in_cache(): Use strcpy() instead of strncpy(),
because they are known to be equivalent in this case (the length
of old_name was already validated).

mariabackup: Invoke strncpy() with one less than the buffer size,
and explicitly add NUL as the last byte of the buffer.

Do the same that newer branches do and don't include glibc-related headers on non-glibc environment.

In the function prev_record_reads where one finds the different row combinations for a
subset of partial join, it did not take into account the selectivity of tables
involved in the subset of partial join.

dict_index_add_to_cache_w_vcol(): merge with dict_index_add_to_cache()

Unfortunate DROP TEMPORARY..IF EXISTS on a regular table may allow
subsequent CREATE TABLE statements to steal away the PFS_table_share
instance from the dropped table.