Remove from debian build:
* tokudb
* mroonga
* spider
* ograph
* embedded server

Add ccache to debian build.

Backport 10.3 changes to autobake-deb
that make travis faster.

Merge instructions:
Drop this commit on merge to 10.3

MDEV-23894 UBSAN: several call to function show_binlog_vars(THD*, st_mysql_show_var*, char*) through pointer to incorrect function type 'int (*)(THD *, st_mysql_show_var *, void *, system_status_var *, enum_var_type) errors

MDEV-18593 : galera.galera_gcache_recover_full_gcache: Test failure: galera_gcache_recover_full_gcache.test: assert_grep.inc failed

Grep only the fact that we need to fall back to SST.

In MDEV-21452, SAFE_MUTEX flagged an ordering problem that involved
trx_t::mutex, LOCK_global_system_variables, and LOCK_commit_ordered
when running
./mtr --no-reorder\
 binlog.binlog_checksum,mix binlog.binlog_commit_wait,mix

Because LOCK_commit_ordered is acquired by replication code before
innobase_commit_ordered() is invoked, and because LOCK_commit_ordered
should be below LOCK_global_system_variables in the global latching
order, it turns out that we must avoid acquiring
LOCK_global_system_variables in any low-level code.

It also turns out that lock_rec_lock() acquires lock_sys_t::mutex
and then carries on to call lock_rec_enqueue_waiting(), which may
invoke THDVAR() via thd_lock_wait_timeout(). This call is problematic
if THDVAR() had never been invoked in that thread earlier.

innobase_trx_init(): Let us invoke THDVAR() at the start of an InnoDB
transaction so that future invocations of THDVAR() will avoid
LOCK_global_system_variables acquisition on the same THD. Because
the first call to intern_sys_var_ptr() will initialize all session
variables by not passing the offset to sync_dynamic_session_variables(),
this will indeed make any future THDVAR() invocation mutex-free.

There are some THDVAR() calls in other code (related to indexed virtual
columns, fulltext indexes, and DDL operations). No SAFE_MUTEX warning
was known for those, but there does not appear to be any replication
test coverage for indexed virtual columns or fulltext indexes. DDL should
be covered, and perhaps DDL code paths were already invoking THDVAR()
while not holding any InnoDB mutex.

Side note: MySQL should avoid this type of deadlocks since
mysql/mysql-server@4d275c89954685e2ed1b368812b3b5a29ddf9389.
MariaDB never defined alloc_and_copy_thd_dynamic_variables(),
because we prefer to avoid overhead during connection creation.

An important part of the deadlock could be the current handling of
SET GLOBAL binlog_checksum=NONE; and similar assignments.
In binlog_checksum_update(), we would hold LOCK_global_system_variables
while potentially acquiring LOCK_commit_ordered in MYSQL_BIN_LOG::open().
Even if that code was changed later to release
LOCK_global_system_variables during the write to mysql_bin_log,
it could be a good idea for performance to avoid invoking the
expensive code path of THDVAR() while holding any InnoDB mutexes,
such as lock_sys.mutex in lock_rec_enqueue_waiting().

Thanks to Andrei Elkin for debugging the SAFE_MUTEX issue, and to
Sergei Golubchik for the suggestion to invoke THDVAR() early.

Changes to be committed:
	modified:   mysql-test/suite/sys_vars/r/wsrep_cluster_address_basic.result
	modified:   mysql-test/suite/sys_vars/t/wsrep_cluster_address_basic.test

The setting innodb_lock_schedule_algorithm=VATS that was introduced
in MDEV-11039 (commit 021212b5)
causes conflicting exclusive locks to be incorrectly granted to
two transactions. Specifically, in lock_rec_insert_by_trx_age()
the predicate !lock_rec_has_to_wait_in_queue(in_lock) would hold even
though an active transaction is already holding an exclusive lock.
This was observed between two DELETE of the same clustered index record.
The HASH_DELETE invocation in lock_rec_enqueue_waiting() may be related.

Due to lack of progress in diagnosing the problem, we will deprecate the
option and issue a warning that using it may corrupt data. The unsafe
option was enabled between
commit 0c15d1a6 (MariaDB 10.2.3)
and the parent of
commit 1cc1d042 (MariaDB 10.2.17, 10.3.9).

SYNC_REC_LOCK was never used in the public history of InnoDB,
starting with commit 132e667b.

Amend check for unread client data in threadpool.

THD::NET will have unread data, in case client uses compression, and
wraps multiple commands into  a single compression packet

MariaDB C/C sends COM_STMT_RESET+COM_STMT_EXECUTE, and wraps it into
a single compressed packet, when compression is on, thus trying to use
compression and prepared statements against a threadpool-enabled server
will result into a hang, before this patch.

The orphan declaration was added in MySQL 5.6.2
mysql/mysql-server@2915417e026ef9fdd8e36df17938409ccc157d86
and MariaDB commit 1d0f70c2.

The unused fts_t::bg_threads was added in
mysql/mysql-server@4b1049625c00dbfcd9d7a11ad12a84695ab747e3.

Any usage of fts_t::bg_threads_mutex was removed in
mysql/mysql-server@33c2404b397e1077daaf0ef0ff9edba445430f5f.

In fts_optimize_remove_table(), InnoDB tries to access the
fts_optimize_wq after shutting down the fts optimize thread.
This issue caused by the commit a41d4297.
Fix should check for fts optimize thread shutdown state
before checking fts_optimize_wq.

This has been unused from the very beginning
(mysql/mysql-server@d5e512ae7e37cd1f70c44a3f12205d70b13118ab).

ibuf_merge_or_delete_for_page(): Do not attempt to invoke
ibuf_delete_recs() on a page of the change buffer itself.
The caller could already be holding ibuf->index->lock,
and an attempt to acquire it in S mode would hang the release server
or cause an assertion failure in rw_lock_s_lock_func() in a debug
server.

This problem was reproducible on 1 out of 2 runs of the following:
./mtr --no-reorder \
innodb.innodb-page_compression_default \
innodb.innodb-page_compression_snappy \
innodb.innodb-page_compression_zip \
innodb.innodb_wl6326_big innodb.xa_recovery

This was missed in commit 2c252ba9
(MySQL 5.5.42, MariaDB 5.5.42).

Fix typo.

MDEV-22277 LeakSanitizer: detected memory leaks in mem_heap_create_block_func after attempt to create foreign key

- During online DDL, prepare phase error handler fails to remove
the memory allocated for newly created foreign keys.

This will update galera_3nodes/disabled.def.

MDEV-22330: mysqlbinlog stops with an error Don't know how to handle column type: 255 meta: 4 (0004)

Analysis:
========
"mysqlbinlog -v" option will reconstruct row events and display them as
commented SQL statements. If this option is given twice, the output includes
comments to indicate column data types and some metadata.
`log_event_print_value` is the function reponsible for printing values and
their types. This function doesn't handle GEOMETRY type. Hence the above error
gets printed.

Fix:
===
Add support for GEOMETRY datatype.

The original code was correct. mysql_upgrade calls the mysql client to
talk with MariaDB. It doesn't call itself!

Appoligies, had a dirty branch before pushing:

This reverts commit 053653a2.

This reverts commit 0ff89780.

This reverts commit 85b08597.

This reverts commit f3f45e46.

This reverts commit a470b357.

This reverts commit f8b8d202.

This reverts commit 6b6f066f.

This reverts commit a701e9e6.

This reverts commit c1698386.

Leave debian/additions/mysqlreport as #!/usr/bin/perl

Acknowledge that `env perl` is a hack, a complete fix
needs to consider which path perl is at and insert into
these scripts.

The usefulness of these scripts is questionable.

Passing a null pointer to a nonnull argument is not only undefined
behaviour, but it also grants the compiler the permission to optimize
away further checks whether the pointer is null. GCC -O2 at least
starting with version 8 may do that, potentially causing SIGSEGV.

Shifting a 16-bit type by 16 bits is undefined behaviour.
The result is at least 32 bits, so let us cast the shift operand
to a wider type before shifting.

For some reason, adding -fsanitize=undefined (cmake -DWITH_UBSAN=ON)
to the compilation flags will cause even more warnings to be emitted.
The warnings do look bogus, but the code can be simplified.

For some reason, adding -fsanitize=undefined (cmake -DWITH_UBSAN=ON)
to the compilation flags will cause even more warnings to be emitted.
The warning was a bogus one:

tests/mysql_client_test.c:8632:22: error: '%d' directive writing between
1 and 11 bytes into a region of size 9 [-Werror=format-overflow=]
 8632 |     sprintf(field, "c%d int", i);
      |                      ^~
tests/mysql_client_test.c:8632:20: note: directive argument
in the range [-2147483648, 999]

The warning does not take into account that the lower bound of the
variable actually is 0. But, we can help the compiler and use an
unsigned variable.

It turns out that we must check for DISCARD TABLESPACE both
when the table is being rebuilt and when the AUTO_INCREMENT
value of the table is being added.

This was caught by the test innodb.alter_missing_tablespace.
Somehow I failed to run all tests. Sorry!

The statement ALTER TABLE...DISCARD TABLESPACE is problematic,
because its designed purpose is to break the referential integrity
of the data dictionary and make a table point to nowhere.

ha_innobase::commit_inplace_alter_table(): Check whether the
table has been discarded. (This is a bit late to check it, right
before committing the change.) Previously, we performed this check
only in a specific branch of the function commit_set_autoinc().

Note: We intentionally allow non-rebuilding ALTER TABLE even if
the tablespace has been discarded, to remain compatible with MySQL.
(See the various tests with "wl5522" in the name, such as
innodb.innodb-wl5522.)

The test case would crash starting with 10.3 only, but it does not hurt
to minimize the code and test difference between 10.2 and 10.3.

dict_load_table_low(): Copy the 'discarded' flag to file_unreadable.
This allows to avoid a potentially harmful call to dict_stats_init()
in ha_innobase::open().

The test that was added in commit e05650e6
would break a subsequent run of a test encryption.innodb-bad-key-change
because some pages in the system tablespace would be encrypted with
a different key.

The failure was repeatable with the following invocation:

./mtr --no-reorder \
encryption.create_or_replace,cbc \
encryption.innodb-bad-key-change,cbc

Because the crash was unrelated to the code changes that we reverted
in commit eb38b1f7
we can safely re-apply those fixes.

After DISCARD TABLESPACE, the tablespace of a table will no longer
exist, and dict_get_and_save_data_dir_path() would invoke
dict_get_first_path() to read an entry from SYS_DATAFILES.
For some reason, DISCARD TABLESPACE would not to remove the entry
from there.

dict_get_and_save_data_dir_path(): If the tablespace has been
discarded, do not bother trying to read the name.

Side note: The tables SYS_TABLESPACES and SYS_DATAFILES are
redundant and subject to removal in MDEV-22343.

This reverts commit e33f7b6f.
The change seems to have introduced intermittent failures of the test
encryption.innodb-bad-key-change on many platforms.

The failure that we were trying to address was not reproduced on 10.2.
It could be related to commit a7dd7c89
(MDEV-23651) or de942c9f (MDEV-15983)
or other changes that reduced contention on fil_system.mutex in 10.3.

The fix that we are hereby reverting from 10.2 seems to work fine
on 10.3 and 10.4.