SP instructions, consisting a body of a stored routine, had the same memory
root as an instance of the class sp_head, representing abstraction for stored
routine itself. It resulted in memory leaks on re-parsing a failed statement
of a stored routine in case the statement re-compilation has to be performed
by the reason of changes in metadata of tables, triggers, etc. the stored
routine depends on.

To fix this kind of memory leaks, every SP instruction requiring access to
a LEX object must do re-parsing of a failed statement on its own memory root.
These memory roots are allocated on sp_head's memory root and every instance of
the sp_lex_instr class has a pointer to allocated memory root in case re-parsing
of the correspondiong SP instruction was requested. On every subsequent
re-parsing of the failed statement, a memory allocated on SP instruction's
memory root is released and the memory root re-initialized. Following memory
allocations taken place on re-parsing the SP instruction's statement
is performed on the dedicated memory root. So, no memory leaks will happen on
SP statement re-parsing.

Fedora 40 introdced wget2 as the default wget program, which caused a
break in the functionality of the test_upgrade.sh script. Modified the
archive.mariadb.org check so that it uses a one-line `curl` check to
identify the correct repository URL.

Additionally added rpm sources for the boost-program-options and openssl
1.1 and 1.0.2. This is necessary when building older versions of MariaDB
(e.g., 10.4) on newer linux distributions (e.g., Fedora 39) that do not
always have access to all required dependencies. In the above example
older MariaDB versions are not compatible with OpenSSL 3.0+, so require
an older version.

All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer Amazon Web
Services.

my_like_range*() can create longer keys than Field::char_length().
This caused warnings during print_range().

Fix:

Suppressing warnings in print_range().

Line numbers had to be removed from the ignorelists in order to be
diffed against since locations of the same findings can differ
across runs. Therefore preprocessing has to be done on the CI findings
so that it can be compared to the ignorelist and new findings can be
outputted. However, since line numbers have to be removed, a situation
occurs where it is difficult to reference the location of findings
in code given the output of the CI job.

To lessen this pain, change the cppcheck template to include
code snippets which make it easier to reference where in the code
the finding is referring to, even in the absence of line numbers.
Ignorelisting works as before since locations of the finding may
change but not the code it is referring to.

Furthermore, due to the innate difficulty in maintaining ignorelists
across branches and triaging new findings, allow failure as to not
have constantly failing pipelines as a result of a new findings that
have not been addressed yet.

Lastly, update SAST ignorelists to match the newly refactored cppcheck
job and the current state of the codebase.

All new code of the whole pull request, including one or several
files that are either new files or modified ones, are contributed
under the BSD-new license. I am contributing on behalf of my
employer Amazon Web Services, Inc.

Rectify cases of mismatched brackets and address
possible cases of division by zero by checking if
the denominator is zero before dividing.

No functional changes were made.

All new code of the whole pull request, including one or several
files that are either new files or modified ones, are contributed
under the BSD-new license. I am contributing on behalf of my
employer Amazon Web Services, Inc.

crc32_avx512(): Explicitly cast ssize_t(size) to make it clear that
we are indeed applying a negative offset to a pointer.

The issue was that when repairing an Aria table of row format PAGE and
the data file was bigger the 4G, the data file length was cut short
because of wrong parameters to MY_ALIGN().

The effect was that ALTER TABLE, OPTIMIZE TABLE or REPAIR TABLE would fail
on these tables, possibly corrupting them.
The MDEV also exposed a bug where error state was not propagated properly
to the upper level if the number of rows in the table changed.

The current semi-sync binlog fail-over recovery process uses
rpl_semi_sync_slave_enabled==TRUE as its condition to truncate a
primary server’s binlog, as it is anticipating the server to re-join
a replication topology as a replica. However, for servers configured
with both rpl_semi_sync_master_enabled=1 and
rpl_semi_sync_slave_enabled=1, if a primary is just re-started (i.e.
retaining its role as master), it can truncate its binlog to drop
transactions which its replica(s) has already received and executed.
If this happens, when the replica reconnects, its gtid_slave_pos can
be ahead of the recovered primary’s gtid_binlog_pos, resulting in an
error state where the replica’s state is ahead of the primary’s.

This patch changes the condition for semi-sync recovery to truncate
the binlog to instead use the configuration variable
--init-rpl-role, when set to SLAVE. This allows for both
rpl_semi_sync_master_enabled and rpl_semi_sync_slave_enabled to be
set for a primary that is restarted, and no transactions will be
lost, so long as --init-rpl-role is not set to SLAVE.

Reviewed By:
============
Sergei Golubchik <serg@mariadb.com>

The special logic used by the memory storage engine
to keep slaves in sync with the master on a restart can
break replication. In particular, after a restart, the
master writes DELETE statements in the binlog for
each MEMORY-based table so the slave can empty its
data. If the DELETE is not executable, e.g. due to
invalid triggers, the slave will error and fail, whereas
the master will never see the problem.

Instead of DELETE statements, use TRUNCATE to
keep slaves in-sync with the master, thereby bypassing
triggers.

Reviewed By:
===========
Kristian Nielsen <knielsen@knielsen-hq.org>
Andrei Elkin <andrei.elkin@mariadb.com>

During read only mode, InnoDB doesn't allow checkpoint to happen.
So InnoDB should throw the warning when InnoDB tries to
force the checkpoint when innodb_read_only = 1 or
innodb_force_recovery = 6.

MariaDB supports a "wait-free concurrent allocator based on pinning addresses".
In `lf_pinbox_real_free()` it tries to sort the pinned addresses for better
performance to use binary search during "real free". `alloca()` was used to
allocate stack memory and copy addresses.

To prevent a stack overflow when allocating the stack memory the function checks
if there's enough stack space. However, the available stack size was calculated
inaccurately which eventually caused database crash due to stack overflow.

The crash was seen on MariaDB 10.6.11 but the same code defect exists on all
MariaDB versions.

A similar issue happened previously and the fix in fc2c1e43 was to add a
`ALLOCA_SAFETY_MARGIN` which is 8192 bytes. However, that safety margin is not
enough during high connection workloads.

MySQL also had a similar issue and the fix
https://github.com/mysql/mysql-server/commit/b086fda was to remove the use of
`alloca` and replace qsort approach by a linear scan through all pointers (pins)
owned by each thread.

This commit is mostly the same as it is the only way to solve this issue as:
1. Frame sizes in different architecture can be different.
2. Number of active (non-null) pinned addresses varies, so the frame
   size for the recursive sorting function `msort_with_tmp` is also hard
   to predict.
3. Allocating big memory blocks in stack doesn't seem to be a very good
   practice.

For further details see the mentioned commit in MySQL and the inline comments.

All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer Amazon Web
Services, Inc.

The symptoms were: take a server with no activity and a table that's
not in the buffer pool. Run a query that reads the whole table and
observe that r_engine_stats.pages_read_count shows about 2% of the table
was read. Who reads the rest?

The cause was that page prefetching done inside InnoDB was not counted.

This counts page prefetch requests made in buf_read_ahead_random() and
buf_read_ahead_linear() and makes them visible in:

- ANALYZE: r_engine_stats.pages_prefetch_read_count
- Slow Query Log: Pages_prefetched:

This patch intentionally doesn't attempt to count the time to read the
prefetched pages:
* there's no obvious place where one can do it
* prefetch reads may be done in parallel (right?), it is not clear how
  to count the time in this case.

The crash is caused by the attempt to refix the constant subquery during
pushdown from HAVING into WHERE optimization.

Every condition that is going to be pushed into WHERE clause is first
cleaned up, then refixed. Constant subqueries are not cleaned or refixed
because they will remain the same after refixing, so this complicated
procedure can be omitted for them (introduced in MDEV-21184).
Constant subqueries are marked with flag IMMUTABLE_FL, that helps to miss
the cleanup stage for them. Also they are marked as fixed, so refixing is
also not done for them.
Because of the multiple equality propagation several references to the same
constant subquery can exist in the condition that is going to be pushed
into WHERE. Before this patch, the problem appeared in the following way.
After the first reference to the constant subquery is processed, the flag
IMMUTABLE_FL for the constant subquery is disabled.
So, when the second reference to this constant subquery is processed, the
flag is already disabled and the subquery goes through the procedure of
cleaning and refixing. That causes a crash.

To solve this problem, IMMUTABLE_FL should be disabled only after all
references to the constant subquery are processed, so after the whole
condition that is going to be pushed is cleaned up and refixed.

Approved by Igor Babaev <igor@maridb.com>

Fixing applying the COLLATE clause to a parameter caused an error error:
  COLLATION '...' is not valid for CHARACTER SET 'binary'

Fix:

- Changing the collation derivation for a non-prepared Item_param
  to DERIVATION_IGNORABLE.

- Allowing to apply any COLLATE clause to expressions with DERIVATION_IGNORABLE.
  This includes:
    1. A non-prepared Item_param
    2. An explicit NULL
    3. Expressions derived from #1 and #2

  For example:
    SELECT ? COLLATE utf8mb_unicode_ci;
    SELECT NULL COLLATE utf8mb_unicode_ci;
    SELECT CONCAT(?) COLLATE utf8mb_unicode_ci;
    SELECT CONCAT(NULL) COLLATE utf8mb_unicode_ci

- Additional change: preserving the collation of an expression when
  the expression gets assigned to a PS parameter and evaluates to SQL NULL.
  Before this change, the collation of the parameter was erroneously set
  to &my_charset_binary.

- Additional change: removing the multiplication to mbmaxlen from the
  fix_char_length_ulonglong() argument, because the multiplication already
  happens inside fix_char_length_ulonglong().
  This fixes a too large column size created for a COLLATE clause.

In 10.0 there was an assert to ensure that there were semi
sync clients before removing one, but it was removed in 10.1.
This patch adds the assertion back.

The performance regression seen while loading BP is caused by the
deadlock fix given in MDEV-33543. The area of impact is wider but is
more visible when BP is being loaded initially via DMLs.  Specifically
the response time could be impacted in DML doing pessimistic operation
on index(split/merge) and the leaf pages are not found in buffer pool.
It is more likely to occur with small BP size.

The origin of the issue dates back to MDEV-30400 that introduced
btr_cur_t::search_leaf() replacing btr_cur_search_to_nth_level() for
leaf page searches. In btr_latch_prev, we use RW_NO_LATCH to get the
previous page fixed in BP without latching. When the page is not in BP,
we try to acquire and wait for S latch violating the latching order.

This deadlock was analyzed in MDEV-33543 and fixed by using the already
present wait logic in buf_page_get_gen() instead of waiting for latch.
The wait logic is inferior to usual S latch wait and is simply a
repeated sleep 100 of micro-sec (The actual sleep time could be more
depending on platforms). The bug was seen with "change-buffering" code
path and the idea was that this path should be less exercised. The
judgement was not correct and the path is actually quite frequent and
does impact performance when pages are not in BP and being loaded by
DML expanding/shrinking large data.

Fix: While trying to get a page with RW_NO_LATCH and we are attempting
"out of order" latch, return from buf_page_get_gen immediately instead
of waiting and follow the ordered latching path.

If compiled for debugging, LOCK_DURATION is also filled in.

Valgrind looks as the assertions as examining uninitalized values.

As the assertions are tested in other Debug builds we know
it isn't all invalid.

Account for Valgrind by removing the assertion under
the WITH_VALGRIND=1 compulation.

The memory leak happened on second execution of a prepared statement
that runs UPDATE statement with correlated subquery in right hand side of
the SET clause. In this case, invocation of the method
  table->stat_records()
could return the zero value that results in going into the 'if' branch
that handles impossible where condition. The issue is that this condition
branch missed saving of leaf tables that has to be performed as first
condition optimization activity. Later the PS statement memory root
is marked as read only on finishing first time execution of the prepared
statement. Next time the same statement is executed it hits the assertion
on attempt to allocate a memory on the PS memory root marked as read only.
This memory allocation takes place by the sequence of the following
invocations:
 Prepared_statement::execute
  mysql_execute_command
   Sql_cmd_dml::execute
    Sql_cmd_update::execute_inner
     Sql_cmd_update::update_single_table
      st_select_lex::save_leaf_tables
       List<TABLE_LIST>::push_back

To fix the issue, add the flag SELECT_LEX::leaf_tables_saved to control
whether the method SELECT_LEX::save_leaf_tables() has to be called or
it has been already invoked and no more invocation required.

Similar issue could take place on running the DELETE statement with
the LIMIT clause in PS/SP mode. The reason of memory leak is the same as for
UPDATE case and be fixed in the same way.

Caused by:
5d37cac7 MDEV-33348 ALTER TABLE lock waiting stages are indistinguishable.

In that commit, progress reporting was moved to
mysql_alter_table from copy_data_between_tables.

The temporary table case wasn't taken into the consideration,
where the execution of mysql_alter_table ends earlier than usual, by the
'end_temporary' label. There, thd_progress_end has been missing.

Fix:
Add missing thd_progress_end() call in mysql_alter_table.

The feedback plugin server_uid variable and the calculate_server_uid()
function is moved from feedback/utils.cc to sql/mysqld.cc

server_uid is added as a global variable (shown in 'show variables') and
is written to the error log on server startup together with server version
and server commit id.

We have an issue if a user have the following in a configuration file:
log_slow_filter=""                  # Log everything to slow query log
log_queries_not_using_indexes=ON

This set log_slow_filter to 'not_using_index' which disables
slow_query_logging of most queries.
In effect, on should never use log_slow_filter="" in config files but
instead use log_slow_filter=ALL.

Fixed by changing log_slow_filter="" that comes either from a
configuration file or from the command line, when starting to the server,
to log_slow_filter=ALL.
A warning will be printed when this happens.

Other things:
- One can now use =ALL for any 'set' variable to set all options at once.
  (backported from 10.6)

When getaddrinfo returns and error, the contents
of ai are invalid so we cannot continue based
on their data structures.

In the previous branch of the if statement, we
abort there if there is an error so for consistency
we abort here too.

The test case fixes the port number to UINTMAX32
for both an enumberated bind-address and the
default bind-address covering the two calls to
getaddrinfo.

Review thanks Sanja.

Fix for v. 10.5

Item_func_hex::fix_length_and_dec() evaluated a too short data type
for signed numeric arguments, which resulted in a 'Data too long for column'
error on CREATE..SELECT.

Fixing the code to take into account that a short negative
numer can produce a long HEX value: -1  -> 'FFFFFFFFFFFFFFFF'

Also fixing Item_func_hex::val_str_ascii_from_val_real().
Without this change, MTR test with HEX with negative float point arguments
failed on some platforms (aarch64, ppc64le, s390-x).

Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>

InnoDB transactions may be reused after committed:
- when taken from the transaction pool
- during a DDL operation execution

In this case wsrep flag on trx object is cleared, which may cause wrong
execution logic afterwards (wsrep-related hooks are not run).

Make trx->wsrep flag initialize from THD object only once on InnoDB transaction
start and don't change it throughout the transaction's lifetime.
The flag is reset at commit time as before.

Unconditionally set wsrep=OFF for THD objects that represent InnoDB background
threads.

Make Wsrep_schema::store_view() operate in its own transaction.

Fix streaming replication transactions' fragments rollback to not switch
THD->wsrep value during transaction's execution
(use THD->wsrep_ignore_table as a workaround).
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>

extra_port and port are 16 bit numbers and not 32 bit as they are
tcp ports.

Restrict their value.

Noticed thanks to Razvan Liviu Varzaru

Mismatched IF/ENDIF statements in cmake
caused a warning.